Avaliação por Imagem de Ressonância Magnética das alterações estruturais e fisiológicas dos músculos da perna após exercício

Esta dissertação tem como objectivo principal avaliar por IRM as alterações arquitectónicas e funcionais dos músculos mais importantes da perna quando submetidos a um protocolo de exercício intenso. Para esse fim, foram utilizadas técnicas avançadas de imagem específicas tais como o DTI, o BOLD e a relaxometria T2. Estas técnicas forneceram-nos de forma não-invasiva diversas informações in vivo e em tempo real sobre os tecidos musculares. Para além destas, também foram utilizadas sequências ponderadas em DP que serviram de referência anatómica e das quais também foram retirados dados arquitectónicos. Participaram neste estudo seis jovens atletas saudáveis do sexo feminino. Os músculos analisados foram o tibial anterior, os gastrocnémios (medial e lateral) e o solear. As diversas sequências de imagem foram adquiridas em duas fases distintas: pré e pós-exercício. O protocolo de exercício constou numa série de saltos unipedais realizados até à exaustão. Depois de adquiridas, as imagens foram processadas e tratadas com scripts dedicados e/ou software especializado. Os valores obtidos através da delimitação de ROIs, manipulação das imagens em 3D e execução de tractografias permitiram-nos apreciar as alterações ocorridas nos músculos exercitados. Após tratamento estatístico, verificou-se um comportamento semelhante entre os músculos nas várias técnicas de imagem. O ADC, o sinal BOLD e o valor de T2 variaram de forma equivalente nos músculos gastrocnémios e solear (agonistas no exercício praticado), enquanto que no tibial anterior estas variações foram menores ou inclusivamente negativas. Quanto aos dados arquitectónicos registados de forma directa na imagem ou obtidos através do DTI, não verificamos alterações estatisticamente significativas na maior parte das variáveis, à excepção do comprimento médio das fibras, do CSA e do ângulo de penação de alguns músculos. A IRM consegue assim avaliar a estrutura e função do músculo, complementando ou substituindo cada vez mais outras técnicas mais invasivas ou ineficazes.

Development of procedures for the design, optimization and manufacturing of customized orthopaedic and trauma implants: Geometrical/anatomical modelling from 3D medical imaging

Tese de Doutoramento (Programa Doutoral em Engenharia Biomédica)

An investigation into the temperature distribution resulting from cutting of compact bone using a reciprocating bone saw

Surgical procedures such as osteotomy and hip replacement involve the cutting of bone with the aid of various manual and powered cutting instruments including manual and powered bone saws. The basic mechanics of bone sawing processes are consistent with most other material sawing processes such as for wood or metal. Frictional rubbing between the blade of the saw and the bone results in the generation of localised heating of the cut bone. Research studies have been carried out which consider the design of the bone saw which deals with specifics of the saw teeth geometry and research which examines the effect of drilling operations on heating of the bone has shown that elevated temperatures will occur from frictional overheating. This overheating in localised areas is known to have an impact on the rate of healing of the bone post operation and the sharpness life of the blade. The purpose of this study was to measure the temperature at three zones at fixed intervals of 3mm, 6mm, and 9mm away from the cutting zone. It should be noted that it was the first time that this measurement technique was used to measure the temperature gradient through the bone specimen thereby establishing the extent to which clinicians are experiencing thermal injury during sawing of bone while using a reciprocating saw. The effect of various cutting feed rate on temperature elevation was also investigated in this research. The results showed that there will be a region of bone at least 9mm either side of the cutting blade experiencing thermal injury as temperatures in this region exceeded the threshold temperature of 44°C for necrosis (cell death).

Relação entre o Paratormônio e Depressão na insuficiência cardíaca

FUNDAMENTO: Tem-se observado que a depressão é preditora de reinternação e mortalidade na insuficiência cardíaca. O hormônio da paratireoide é um biomarcador novo e promissor que pode predizer a internação, a capacidade funcional e a mortalidade na insuficiência cardíaca. OBJETIVO: Nosso objetivo foi investigar a associação da depressão aos níveis séricos de hormônio da paratireoide em pacientes com insuficiência cardíaca sistólica. MÉTODOS: Cem pacientes ambulatoriais consecutivos com IC sistólica com fração de ejeção do ventrículo esquerdo < 40% foram examinados prospectivamente. Todos os pacientes foram submetidos a exames laboratoriais, incluindo análises de peptídeo natriurético cerebral e de hormônio da tireoide. Os pacientes foram convidados a completar o Inventário de Depressão de Beck-II. RESULTADOS: Cinquenta e um pacientes (51%) apresentavam escore de BDI ruim (escore de BDI > 18). Esses pacientes apresentavam níveis de hormônio da paratireoide significativamente mais elevados em comparação com aqueles com bons escores de BDI (133 ± 46 pg/ml versus 71 ± 26 pg/ml, p < 0,001). No modelo de regressão logística multivariada, constatou-se que o nível do hormônio da tireoide (razão de chances (OR) = 1.035, p = 0,003), fração de ejeção do ventrículo esquerdo (OR = 0,854, p = 0,004), classe funcional III / IV (OR = 28,022, p = 0,005), C-reactive protein (CRP) (OR = 1,088, p = 0,020) e presença de edema pré-tibial (OR = 12,341, p = 0,033) constituíam preditores independentes de depressão moderada a importante após o ajuste de outros possíveis fatores de confusão. CONCLUSÃO: Pacientes com insuficiência cardíaca sistólica com depressão moderada a importante apresentavam níveis séricos elevados de hormônio da tireoide e CRP, capacidade funcional ruim e fração de ejeção do ventrículo esquerdo mais baixa. A associação da depressão com esses parâmetros pode explicar a contribuição da depressão para a internação e a mortalidade na insuficiência cardíaca.

A new species of Tmesiphantes (Araneae, Theraphosidae) from the state of Pará, Brazil

A new species of Tmesiphantes Simon, 1892, T. aridai sp. nov., is described and illustrated based on three males and three females collected at the Floresta Nacional do Tapajós, Santarém, state of Pará, Brazil. Males can be distinguished from T. perp Guadanucci & Silva, 2012 by the palpal bulb with an inconspicous tegular basal projection, but presenting a very slender embolus with shorter keels not extending to the tip, and from T. nubilus Simon, 1892 by the tibial apophysis with two similarly sized branches, the prolateral one with a strong spine on the retrolateral margin. Females resemble T. nubilus by the aspect of the seminal receptacle but the constriction near the apex is less evident and apex shape is irregular. The new species represents the first record of Tmesiphantes from the Amazonian region, bringing the total number of species to eight.

A new species of Phrixotrichus (Araneae, Theraphosidae) from southwestern Argentina and new distributional data for P. vulpinus

ABSTRACT A new species of Phrixotrichus Simon, 1889, P. pucara sp. nov., is described and illustrated based on a male from Pucará river, Neuquén province, Argentina. Male can be distinguished from all other species of the genus by the presence of a long strong spine on inner face of prolateral branch of tibial apophysis; also, it differs from P. scrofa (Molina, 1788) and P. vulpinus (Karsch, 1880) by a serrated prolateral keel of the male palpal bulb. Male resembles P. jara Perafán & Pérez-Miles, 2014 but can be distinguished by the uniform color on dorsal cephalothorax and by the palpal organ morphology being wider on the bulb base and embolus shorter and thicker, with the tip of embolus not so directed retrolaterally and prolateral keel bearing a serrated edge with three teeth. Additionally, P. vulpinus is reported for the first time for Argentina along with new distributional data.

Angiotensin II favors progression to heart failure in diabetic hearts: role of myocardial fatty acid oxidation downregulation

Purpose: Diabetic myocardium is particularly vulnerable to develop heart failure in response to chronic stress conditions including hypertension or myocardial infarction. We have recently observed that angiotensin II (Ang II)-mediated downregulation of the fatty acid oxidation pathway favors occurrence of heart failure by myocardial accumulation of lipids (lipotoxicity). Because diabetic heart is exposed to high levels of circulating fatty acid, we determined whether insulin resistance favors development of heart failure in mice with Ang II-mediated myocardial remodeling.Methods: To study the combined effect of diabetes and Ang II-induced heart remodeling, we generated leptin-deficient/insulin resistant (Lepob/ob) mice with cardiac targeted overexpression of angiotensinogen (TGAOGN). Left ventricular (LV) failure was indicated by pulmonary congestion (lung weight/tibial length>+2SD of wild-type mice). Myocardial metabolism and function were assessed during in vitro isolated working heart perfusion.Results: Forty-eight percent of TGAOGN mice without insulin resistance exhibited pulmonary congestion at the age of 6 months associated with increased myocardial BNP expression (+375% compared with WT) and reduced LV power (developed pressure x cardiac output; -15%). The proportion of mice presenting heart failure was markedly increased to 71% in TGAOGN mice with insulin resistance (TGAOGN/Lepob/ob). TGAOGN/Lepob/ob mice with heart failure exhibited further increase of BNP compared with failing non-diabetic TGAOGN mice (+146%) and further reduction of cardiac power (-59%). Mice with insulin resistance alone (Lepob/ob) did not exhibit signs of heart failure or LV dysfunction. Myocardial fatty acid oxidation measured during in vitro perfusion was markedly increased in non-failing hearts from Lepob/ob mice (+380% compared with WT) and glucose oxidation decreased (-72%). In contrast, fatty acid and glucose oxidation did not differ from Lepob/ob mice in hearts from TGAOGN/Lepob/ob mice without heart failure. However, both fatty acid and glucose oxidation were markedly decreased (-47% and -48%, respectively, compared with WT/Lepob/+) in failing hearts from TGAOGN/Lepob/ob mice. Reduction of fatty acid oxidation was associated with marked reduction of protein expression of a number of regulatory enzymes implied in fatty acid oxidation.Conclusions: Insulin resistance favors the progression to heart failure during chronic exposure of the myocardium to Ang II. Our results are compatible with a role of Ang II-mediated downregulation of fatty acid oxidation, potentially promoting lipotoxicity.

Pseudarthroses aseptiques des os longs [Pseudarthrosis of the long bones].

5 to 10% of all fractures present with a delayed union, whereas 1 to 5% progress to a nonunion, which can be defined as a fracture older than 6 months and lacks any potential to heal without any further intervention. Different fracture and patient related risk factors exist, and the management of a nonunion needs a thorough clinical, radiological and biological workup to classify them in one of the two main categories, the viable nonunions that need essentially more stability, usually by a more rigid fixation, and the non-viable nonunions that need essentially a biological stimulation by decortication and bone grafting. This treatment still remains the first choice with bony healing obtained in 85 to 95% of cases, but it also comes along with certain risks, and some valuable alternatives exist if chosen on the basis of rigid criteria.

Treatment of large bone defects with the Ilizarov technique.

Between 1985 and 1990 we treated 11 large segmental bone defects (average 6.7 cm) in ten patients with the Ilizarov technique. Open fractures, type III according to Gustilo, represented the largest group (8 of 11 cases). The average delay before the Ilizarov technique was initiated was 8.9 months. The external fixator was usually maintained for 1 year. Bone regeneration was obtained in every case. Consolidation was not fulfilled with this technique in three cases. The complications observed were one refracture, four leg-length discrepancies (average 1.5 cm), and five axial deformities exceeding 5 degrees. No pin-track infection was observed. In our limited series of four type IIIC open fractures treated by the Ilizarov technique, no patients required amputation. The Ilizarov technique is particularly useful in the treatment of large bone defects, without major complications, especially if there is an adequate initial debridement.

Assessment and analysis of mechanical allodynia-like behavior induced by spared nerve injury (SNI) in the mouse

Rrésumé: La première description dans une publication médicale des douleurs neuropathiques remonte à 1872, le Dr S.W. Mitchell les résumant ainsi [...]" la causalgie est la plus terrible des tortures qu'une lésion nerveuse puisse entraîner "[...]. Par définition, la douleur neuropathique est une douleur chronique faisant suite à une lésion ou dysfonction du système nerveux. Malgré les progrès faits dans la compréhension de ce syndrome, le détail des mécanismes impliqués nous échappe encore et son traitement reste insuffisant car moins de 50% des patients sont soulagés par les thérapies actuelles. Différents modèles expérimentaux ont été élaborés chez l'animal de laboratoire, en particulier des modèles de lésion de nerfs périphériques chez le rat, permettant des investigations tant moléculaires que fonctionnelles des mécanismes impliqués dans le développement de ces douleurs. En revanche, peu de modèles existent chez la souris, alors que cet animal, grâce à la transgénèse, est très fréquemment utilisé pour l'approche fonctionnelle ciblée sur un gène. Dans l'étude présentée ici, nous avons évalué chez la souris C57BL/6 l'adaptation d'un modèle neuropathique, proposé une nouvelle modalité de mesure de la sensibilité douloureuse adaptée à la souris et défini une méthode d'analyse performante des résultats. Ce modèle, dit de lésion avec épargne nerveuse (spared Werve injury, SNI), consiste en la lésion de deux des trois branches du nerf sciatique, soit les nerfs peronier commun et tibial. La troisième branche, le nerf sural est laissé intact et c'est dans le territoire cutané de ce dernier que la sensibilité douloureuse à des stimulations mécaniques est enregistrée. Des filaments calibrés de force croissante sont appliqués sur la surface de la patte impliquée et la fréquence relative de retrait de la patte a été modélisée mathématiquement et analysée par un modèle statistique intégrant tous les paramètres de l'expérience (mixed-effects model). Des variantes chirurgicales lésant séquentiellement les trois branches du nerf sciatique ainsi que la réponse en fonction du sexe de l'animal ont également été évaluées. La lésion SNI entraîne une hypersensibilité mécanique marquée comparativement aux souris avec chirurgie contrôle; cet effet est constant entre les animaux et persiste durant les quatre semaines de l'étude. De subtiles différences entre les variables, y compris une divergence de sensibilité mécanique entre les sexes, ont été démontrées. La nécessité de léser le nerf tibial pour le développement des symptômes a également été documentée par notre méthode d'évaluation et d'analyse. En conclusion, nous avons validé le modèle SNI chez la souris par l'apparition d'un symptôme reproductible et apparenté à l'allodynie mécanique décrite par les patients souffrant de douleurs neuropathiques. Nous avons développé des méthodes d'enregistrement et d'analyse de la sensibilité douloureuse sensibles qui permettent la mise en évidence de facteurs intrinsèques et extrinsèques de variation de la réponse. Le modèle SNI utilisé chez des souris génétiquement modifiées, de par sa précision et reproductibilité, pourra permettre la discrimination de facteurs génétiques et épigénétiques contribuant au développement et à la persistance de douleurs neuropathiques.

Estudio de la alineación rotacional en la artroplastia total de rodilla mediante tomografía computarizada

L'alineació rotacional a l'astroplàstia total de genoll es refereix a la posició dels implants en el pla axial. Un mínim desplaçament afectarà la distribució de la càrrega y variarà l'estabilitat, l'alineació i la cinemàtica de l'articulació. Tot i que hi ha un consens pel que fa als efectes adversos d'una alineació rotacional incorrecta, encara no està clar quines són les referències anatòmiques que cal utilitzar. Les mesures de l'alineació rotacional requereixen un estudi d'alta qualitat. La TC és la modalitat d'imatge d'elecció per a l'estudi postoperatori de l'artroplàstia total de genoll. L'objectiu d'aquest treball es avaluar la capacitat diagnòstica de la TC per a l'estudi de l'alineació rotacional postoperatòria en l'artroplàstia total de genoll i presentar les variacions en el protocol de TC que minimitzen l'artefacte metàl•lic. Aquest estudi avalua la reproductibilitat de l'angle condili posterior, format per l'eix epicondili quirúrgic i la línia bicondilia posterior, mesurant la correlació entre dos observadors. El coeficient de correlació de Pearson mostra una forta correlació positiva (R=0.84) entre els dos observadors. La mitja d'error de les mesures adquirides és de -0.14º amb una desviació estàndar de 2.06º (-0.14 ± 2.06), per la qual cosa la modificació dels paràmetres tècnics de la TC per a la minimització dels artefactes metàl•lics és eficaç per l'avaluació rotacional. No obstant, l'alta magnitud de l'error indica que el radiòleg ha de ser prudent en el diagnòstic de mínimes variacions angulars que impliquin canvis en l'actitud mèdica i terapèutica.

Efficiency of flexible derotator in walking cerebral palsy children

Introduction The flexible derotator is one of the therapeutic resources used to combat primary and secondary abnormalities in walking cerebral palsy children. It was developed to reduce abnormal femoral and tibial torsions and lessen the latter's negative functional impact. Objective To determine the effect of wearing a flexible derotator on anatomic and functional parameters in walking cerebral palsy children. Methods We performed a retrospective study of walking cerebral palsy children by gathering data on bone-related parameters (femoral and tibial torsion) and functional parameters (distance and speed gait, and the energy expenditure index (EEI)). Fifteen walking cerebral palsy children were treated with the flexible derotator for one year and 15 untreated walking cerebral palsy children were included as controls. The two groups were compared in terms of the various parameters' change over time between the initial examination (the last examination prior to the start of the study or prior to use of the flexible derotator) and the final examination (after one year of follow-up). Results Right femoral anteversion and right and left external tibial torsion improved. There was a significant increase in distance and speed gait and a decrease in the EEI in walking cerebral palsy children. Conclusion Our retrospective study revealed a significant improvement in functional parameters in children with cerebral palsy, as a result of wearing the flexible derotator for at least 6 hours a day for a year. Bone parameters only improved slightly. Use of the flexible derotator could improve these children's quality of life.

Documentation of fracture severity with the AO classification of pediatric long-bone fractures.

BACKGROUND: The AO comprehensive pediatric longbone fracture classification system describes the localization and morphology of fractures, and considers severity in 3 categories: (1) simple, (2) wedge, and (3) complex. We evaluated the reliability and accuracy of surgeons in using this rating system. MATERIAL AND METHODS: In a first validation phase, 5 experienced pediatric (orthopedic) surgeons reviewed radiographs of 267 prospectively collected pediatric fractures (agreement study A). In a second study (B), 70 surgeons of various levels of experience in 15 clinics classified 275 fractures via internet. Simple fractures comprised about 90%, 99% and 100% of diaphyseal (D), metaphyseal (M), and epiphyseal (E) fractures, respectively. RESULTS: Kappa coefficients for severity coding in D fractures were 0.82 and 0.51 in studies A and B, respectively. The median accuracy of surgeons in classifying simple fractures was above 97% in both studies but was lower, 85% (46-100), for wedge or complex D fractures. INTERPRETATION: While reliability and accuracy estimates were satisfactory as a whole, the ratings of some individual surgeons were inadequate. Our findings suggest that the classification of fracture severity in children should be done in only two categories that distinguish between simple and wedge/complex fractures.

Development and experimental validation of a finite element model of total ankle replacement.

Total ankle replacement remains a less satisfactory solution compared to other joint replacements. The goal of this study was to develop and validate a finite element model of total ankle replacement, for future testing of hypotheses related to clinical issues. To validate the finite element model, an experimental setup was specifically developed and applied on 8 cadaveric tibias. A non-cemented press fit tibial component of a mobile bearing prosthesis was inserted into the tibias. Two extreme anterior and posterior positions of the mobile bearing insert were considered, as well as a centered one. An axial force of 2kN was applied for each insert position. Strains were measured on the bone surface using digital image correlation. Tibias were CT scanned before implantation, after implantation, and after mechanical tests and removal of the prosthesis. The finite element model replicated the experimental setup. The first CT was used to build the geometry and evaluate the mechanical properties of the tibias. The second CT was used to set the implant position. The third CT was used to assess the bone-implant interface conditions. The coefficient of determination (R-squared) between the measured and predicted strains was 0.91. Predicted bone strains were maximal around the implant keel, especially at the anterior and posterior ends. The finite element model presented here is validated for future tests using more physiological loading conditions.