Three essays on local demand for public services

Local provision of public services has the positive effect of increasing the efficiency because each locality has its idiosyncrasies that determine a particular demand for public services. This dissertation addresses different aspects of the local demand for public goods and services and their relationship with political incentives. The text is divided in three essays. The first essay aims to test the existence of yardstick competition in education spending using panel data from Brazilian municipalities. The essay estimates two-regime spatial Durbin models with time and spatial fixed effects using maximum likelihood, where the regimes represent different electoral and educational accountability institutional settings. First, it is investigated whether the lame duck incumbents tend to engage in less strategic interaction as a result of the impossibility of reelection, which lowers the incentives for them to signal their type (good or bad) to the voters by mimicking their neighbors’ expenditures. Additionally, it is evaluated whether the lack of electorate support faced by the minority governments causes the incumbents to mimic the neighbors’ spending to a greater extent to increase their odds of reelection. Next, the essay estimates the effects of the institutional change introduced by the disclosure on April 2007 of the Basic Education Development Index (known as IDEB) and its goals on the strategic interaction at the municipality level. This institutional change potentially increased the incentives for incumbents to follow the national best practices in an attempt to signal their type to voters, thus reducing the importance of local information spillover. The same model is also tested using school inputs that are believed to improve students’ performance in place of education spending. The results show evidence for yardstick competition in education spending. Spatial auto-correlation is lower among the lame ducks and higher among the incumbents with minority support (a smaller vote margin). In addition, the institutional change introduced by the IDEB reduced the spatial interaction in education spending and input-setting, thus diminishing the importance of local information spillover. The second essay investigates the role played by the geographic distance between the poor and non-poor in the local demand for income redistribution. In particular, the study provides an empirical test of the geographically limited altruism model proposed in Pauly (1973), incorporating the possibility of participation costs associated with the provision of transfers (Van de Wale, 1998). First, the discussion is motivated by allowing for an “iceberg cost” of participation in the programs for the poor individuals in Pauly’s original model. Next, using data from the 2000 Brazilian Census and a panel of municipalities based on the National Household Sample Survey (PNAD) from 2001 to 2007, all the distance-related explanatory variables indicate that an increased proximity between poor and non-poor is associated with better targeting of the programs (demand for redistribution). For instance, a 1-hour increase in the time spent commuting by the poor reduces the targeting by 3.158 percentage points. This result is similar to that of Ashworth, Heyndels and Smolders (2002) but is definitely not due to the program leakages. To empirically disentangle participation costs and spatially restricted altruism effects, an additional test is conducted using unique panel data based on the 2004 and 2006 PNAD, which assess the number of benefits and the average benefit value received by beneficiaries. The estimates suggest that both cost and altruism play important roles in targeting determination in Brazil, and thus, in the determination of the demand for redistribution. Lastly, the results indicate that ‘size matters’; i.e., the budget for redistribution has a positive impact on targeting. The third essay aims to empirically test the validity of the median voter model for the Brazilian case. Information on municipalities are obtained from the Population Census and the Brazilian Supreme Electoral Court for the year 2000. First, the median voter demand for local public services is estimated. The bundles of services offered by reelection candidates are identified as the expenditures realized during incumbents’ first term in office. The assumption of perfect information of candidates concerning the median demand is relaxed and a weaker hypothesis, of rational expectation, is imposed. Thus, incumbents make mistakes about the median demand that are referred to as misperception errors. Thus, at a given point in time, incumbents can provide a bundle (given by the amount of expenditures per capita) that differs from median voter’s demand for public services by a multiplicative error term, which is included in the residuals of the demand equation. Next, it is estimated the impact of the module of this misperception error on the electoral performance of incumbents using a selection models. The result suggests that the median voter model is valid for the case of Brazilian municipalities.

Impacto da servitização no modelo de negócio de empresas manufatureiras : o caso Scania

Muitas empresas manufatureiras buscam aumentar a participação dos serviços em seus negócios. Essa estratégia é conhecida como servitização e significa aumentar a oferta de pacotes combinados de produtos e serviços com foco nos clientes e seus negócios. Porém, a servitização constitui um grande desafio para essas empresas, pois seus modelos de negócio tradicionais tem foco no desenvolvimento, produção e venda de produtos. Esta pesquisa investiga como uma empresa manufatureira modifica seu modelo de negócio para aumentar sua servitização. A pesquisa também analisa quais são as motivações para que uma empresa busque isso e quais são os desafios que ela enfrenta nessa busca. Com esses objetivos, realizou-se um estudo de caso de uma montadora de veículos pesados com operações globais e presença consolidada no Brasil. Conduziu-se entrevistas com 8 executivos da empresa, responsáveis por Vendas, Serviços, Marketing e Produção no Brasil e América Latina. As entrevistas foram combinadas com análise de documentos da empresa entre os anos de 1996 e 2011. Utilizou-se o conceito de modelo de negócio como unidade básica de análise, já que este conceito explica como uma empresa cria, entrega e captura valor. Os resultados mostram que o modelo de negócio da empresa está em transição, de seu foco tradicional em produto, para maior centralidade do cliente e suas operações. A proposta de valor da empresa passou a enfatizar o desempenho de seus pacotes de produtos e serviços nas operações dos clientes, ao invés do foco tradicional na qualidade dos produtos. A empresa também criou novas organizações, processos e métricas com foco nos clientes e novos modelos de receitas, baseados em contratos de risco e na venda de desempenho e disponibilidade. Os resultados mostram que a empresa possui motivações estratégicas, financeiras e de marketing para buscar a servitização. Eles também mostram que o alinhamento das diversas áreas da empresa e de sua rede de parceiros, para maior foco nos clientes e em serviços, ao invés do seu foco tradicional no produto, ainda representa um importante desafio empresarial.

O campo criminalística: uma abordagem da cultura organizacional à luz da filosofia da ação de Pierre Bourdieu

A cultura organizacional tem se revelado um excelente instrumento analítico em Administração. Sob seu prisma, as organizações têm sido estudadas com o intuito de estabelecer-se ou construir-se uma identidade como modo de alavancar as suas atuações. O presente trabalho, nessa seara, explora os conceitos de cultura e cultura organizacional para melhor amoldar-se aos seus objetivos. Optou-se, nesse contexto, por usar os conceitos firmados pela filosofia da ação de Pierre Bourdieu - Campo, Capitais e habitus -, uma vez que diferenciam-se das demais teorias da cultura por trazer uma concepção relacional entre estrutura e atores sociais, entre objetividade e subjetividade. Utilizando-se desse arcabouço teórico, delimitou-se o Campo Criminalística a partir dos Capitais que ali estão em jogo, sobretudo o Capital nomeado de Forense, diferenciando-o dos demais Campos que o tangenciam: Polícia, Jurídico e Científico. Diante dessa delimitação e a partir de um estudo de caso sobre o Instituto de Criminalística do Distrito Federal, foi possível, ainda, estabelecer os principais elementos cognitivos que compõem o habitus dos Peritos Criminais que ali atuam, cotejando-os, sobretudo, com o habitus do policial, traçando diferenças e possíveis similitudes e irrigações.

Previsão do índice bovespa por meio de redes neurais artificiais: uma análise comparada aos métodos tradicionais de séries de tempo

Forecast is the basis for making strategic, tactical and operational business decisions. In financial economics, several techniques have been used to predict the behavior of assets over the past decades.Thus, there are several methods to assist in the task of time series forecasting, however, conventional modeling techniques such as statistical models and those based on theoretical mathematical models have produced unsatisfactory predictions, increasing the number of studies in more advanced methods of prediction. Among these, the Artificial Neural Networks (ANN) are a relatively new and promising method for predicting business that shows a technique that has caused much interest in the financial environment and has been used successfully in a wide variety of financial modeling systems applications, in many cases proving its superiority over the statistical models ARIMA-GARCH. In this context, this study aimed to examine whether the ANNs are a more appropriate method for predicting the behavior of Indices in Capital Markets than the traditional methods of time series analysis. For this purpose we developed an quantitative study, from financial economic indices, and developed two models of RNA-type feedfoward supervised learning, whose structures consisted of 20 data in the input layer, 90 neurons in one hidden layer and one given as the output layer (Ibovespa). These models used backpropagation, an input activation function based on the tangent sigmoid and a linear output function. Since the aim of analyzing the adherence of the Method of Artificial Neural Networks to carry out predictions of the Ibovespa, we chose to perform this analysis by comparing results between this and Time Series Predictive Model GARCH, developing a GARCH model (1.1).Once applied both methods (ANN and GARCH) we conducted the results' analysis by comparing the results of the forecast with the historical data and by studying the forecast errors by the MSE, RMSE, MAE, Standard Deviation, the Theil's U and forecasting encompassing tests. It was found that the models developed by means of ANNs had lower MSE, RMSE and MAE than the GARCH (1,1) model and Theil U test indicated that the three models have smaller errors than those of a naïve forecast. Although the ANN based on returns have lower precision indicator values than those of ANN based on prices, the forecast encompassing test rejected the hypothesis that this model is better than that, indicating that the ANN models have a similar level of accuracy . It was concluded that for the data series studied the ANN models show a more appropriate Ibovespa forecasting than the traditional models of time series, represented by the GARCH model

Efeitos da microgravidade em plantas de cana-de-açúcar

Sugarcane (Saccharum spp.) is a plant from Poaceae family that has an impressive ability to accumulate sucrose in the stalk, making it a significant component of the economy of many countries. About 100 countries produce sugarcane in an area of 22 million hectares worldwide. For this reason, many studies have been done using sugarcane as a plant model in order to improve production. A change in gravity may be one kind of abiotic stress, since it generates rapid responses after stimulation. In this work we decided to investigate the possible morphophysiological, biochemical and molecular changes resulting from microgravity. Here, we present the contributions of an experiment where sugarcane plants were submitted to microgravity flight using a vehicle VSB-30, a sounding rocket developed by Aeronautics and Space Institute teams, in cooperation with the German Space Agency. Sugarcane plants with 10 days older were submitted to a period of six minutes of microgravity using the VSB-30 rocket. The morphophysiological analyses of roots and leaves showed that plants submitted to the flight showed changes in the conduction tissues, irregular pattern of arrangement of vascular bundles and thickening of the cell walls, among other anatomical changes that indicate that the morphology of the plants was substantially influenced by gravitational stimulation, besides the accumulation of hydrogen peroxide, an important signaling molecule in stress conditions. We carried out RNA extraction and sequencing using Illumina platform. Plants subjected to microgravity also showed changes in enzyme activity. It was observed an increased in superoxide dismutase activity in leaves and a decreased in its activity in roots as well as for ascorbate peroxidase activity. Thus, it was concluded that the changes in gravity were perceived by plants, and that microgravity environment triggered changes associated with a reactive oxygen specie signaling process. This work has helped the understanding of how the gravity affects the structural organization of the plants, by comparing the anatomy of plants subjected to microgravity and plants grown in 1g gravity

Corn (Zea mays L.) cultivars tolerance to nicosulfuron

The effects of nicosulfuron on morphological, yield and growth characteristics and the histological modifications in the leaf blade were evaluated for eight corn cultivars: landrace popcorn, ESALQ-popcorn, Piranao, DSCC-Architecture, ESALQ VF7, ESALQ VD8, JAB 01F and JAB 02D. The experimental de sign was a randomized complete block with three replications in a factorial arrangement. Plots were four rows wide and 6.00m long with 0.90m spacing between rows and 0.20m between plants. Nicosulfuron was applied at the dose of 160 g a.i.ha(-1), when the plants was 25 cm high and has 5-6 expanded leaves. Nicosulfuron significantly reduced plant height at silking and the Final plant stand. There was also a significant reduction for plant height at 47 clays after sowing, for number of leaves, ear position. ear height, grain yield, ear weight and total number of ears due to nicosulfuron. The cultivars JAB 01 and JAB 02 were the least affected by the herbicide with similar yields to those of the control group, showing good tolerance to nicosulfuron. The leaves injury symptoms for all the studied cultivars consisted of chlorosis and puckering of the blades from the expanding central leaves of the plant at 7 days after application. Anatomical alterations in the epidermis due to the herbicide consisted of an increase in number and size of the bulliform cells and in the suppression of the epidermal cells in the epidermis and in the nearby of the vascular bundles. Some parenchymatic cells became voluminous and devoid of chloroplasts. SEM examination revealed a loss of bilateral symmetry of the stomata and disappearance of the subsidiary cells from the stomata near the midrib at the adaxial surface.

Morfo-anatomia de plântulas e número cromossômico de Cybistax antisyphilitica (Mart.) Mart. (Bignoniaceae)

Plântulas de Cybistax antisyphilitica (ipê-verde), espécie arbórea que ocorre no Estado de São Paulo, Brasil, foram estudadas morfoanatomicamente e citogeneticamente. As plântulas são eudicotiledôneas, fanerocotiledonares e epigéias. Suas sementes apresentam alas hialinas, assimétricas e de textura papirácea. A raiz é axial com tecido epidérmico irregular. O hipocótilo é verde, glabro e apresenta os elementos do xilema em diferenciação. Os cotilédones são verdes, foliáceos, reniformes, com mesofilo heterogêneo, epiderme pilosa e feixes vasculares colaterais. Os eófilos são glabros, peciolados, de filotaxia oposta, dorsiventrais, hipoestomáticos e possuem mesofilo heterogêneo e assimétrico. Não há diferenças anatômicas significativas entre os eófilos e os metáfilos. O sistema vascular do pecíolo dos metáfilos dispõe-se em forma de ferradura. A espécie apresenta número cromossômico mitótico 2n = 40 com comprimento cromossômico geral médio de 1,042 µm ± 0,140 e amplitude variando de 0,58 µm até 1,60 µm.

Morphologic and morphometric analysis of testis of Pseudis limellum (Cope, 1862) (Anura, Hylidae) during the reproductive cycle in the Pantanal, Brazil

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Effects of glycosaminoglycan polysulphate on the organisation of collagen fibres in experimentally induced tendonitis in horses

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Genes diferencialmente expressos em cana-de-açúcar inoculada com Xanthomonas albilineans, o agente causal da escaldadura da folha

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Desenvolvimento de antenas de microfita e antenas DRA Broadband

The search for ever smaller device and without loss of performance has been increasingly investigated by researchers involving applied electromagnetics. Antennas using ceramics materials with a high dielectric constant, whether acting as a substract element of patch radiating or as the radiant element are in evidence in current research, that due to the numerous advantages offered, such as: low profile, ability to reduce the its dimensions when compared to other devices, high efficiency of ratiation, suitability the microwave range and/or millimeter wave, low temperature coefficient and low cost. The reason for this high efficiency is that the dielectric losses of ceramics are very low when compared to commercially materials sold used in printed circuit boards, such as fiberglass and phenolite. These characteristics make ceramic devices suitable for operation in the microwave band. Combining the design of patch antennas and/or dielectric resonator antenna (DRA) to certain materials and the method of synthesis of these powders in the manufacture of devices, it s possible choose a material with a dielectric constant appropriate for the design of an antenna with the desired size. The main aim of this work is the design of patch antennas and DRA antennas on synthesis of ceramic powders (synthesis by combustion and polymeric precursors - Pe- chini method) nanostructured with applications in the microwave band. The conventional method of mix oxides was also used to obtain nanometric powders for the preparation of tablets and dielectric resonators. The devices manufactured and studied on high dielectric constant materials make them good candidates to have their small size compared to other devices operating at the same frequency band. The structures analyzed are excited by three different techniques: i) microstrip line, ii) aperture coupling and iii) inductive coupling. The efficiency of these techniques have been investigated experimentally and compared with simulations by Ansoft HFSS, used in the accurate analysis of the electromagnetic behavior of antennas over the finite element method (FEM). In this thesis a literature study on the theory of microstrip antennas and DRA antenna is performed. The same study is performed about the materials and methods of synthesis of ceramic powders, which are used in the manufacture of tablets and dielectric cylinders that make up the devices investigated. The dielectric media which were used to support the analysis of the DRA and/or patch antennas are analyzed using accurate simulations using the finite difference time domain (FDTD) based on the relative electrical permittivity (er) and loss tangent of these means (tand). This work also presents a study on artificial neural networks, showing the network architecture used and their characteristics, as well as the training algorithms that were used in training and modeling some parameters associated with the devices investigated

Análise de antenas utilizando substrato cerâmico, zpt, produzido por síntese auto propagante para aplicações em sistemas de micro-ondas

Ceramic substrates have been investigated by researchers around the world and has achieved a high interest in the scientific community, because they had high dielectric constants and excellent performance in the structures employed. Such ceramics result in miniaturized structures with dimensions well reduced and high radiation efficiency. In this work, we have used a new ceramic material called lead zinc titanate in the form of Zn0,8Pb0,2TiO3, capable of being used as a dielectric substrate in the construction of various structures of antennas. The method used in constructing the ceramic combustion synthesis was Self- Sustained High Temperature (SHS - "Self-Propagating High-Temperature Synthesis") which is defined as a process that uses highly exothermic reactions to produce various materials. Once initiated the reaction area in the reaction mixture, the heat generated is sufficient to become self-sustaining combustion in the form of a wave that propagates converting the reaction mixture into the product of interest. Were analyzed aspects of the formation of the composite Zn0,8Pb0,2TiO3 by SHS powders and characterized. The analysis consisted of determining the parameters of the reaction for the formation of the composite, as the ignition temperature and reaction mechanisms. The production of composite Zn0,8Pb0,2TiO3 by SHS performed in the laboratory, was the result of a total control of combustion temperature and after obtaining the powder began the development of ceramics. The product was obtained in the form of regular, alternating layers of porous ceramics and was obtained by uniaxial pressing. 10 The product was characterized by analysis of dilatometry, X-ray diffraction analysis and scanning electron microscopy. One of the contributions typically defined in this work is the development of a new dielectric material, nevertheless presented previously in the literature. Therefore, the structures of the antennas presented in this work consisted of new dielectric ceramics based Zn0,8Pb0,2TiO3 usually used as dielectric substrate. The materials produced were characterized in the microwave range. These are dielectrics with high relative permittivity and low loss tangent. The Ansoft HFSS, commercial program employee, using the finite element method, and was used for analysis of antennas studied in this work

Desenvolvimento de circuitos planares sobre substratos têxteis

The use of flexible materials for the development of planar circuits is one of the most desired and studied characteristics, lately, by researchers. This happens because the flexibility of the substrate can provide previously impracticable applications, due to the rigidity of the substrates normally used that makes it difficult to fit into the circuits in irregular surfaces. The constant interest in recent years for more lighter devices, increasingly more compacts, flexible and with low cost, led to a new line of research of great interest from both academic and technological views, that is the study and development of textile substrates that can be applied in the development of planar circuits, for applications in the areas of security, biomedical and telecommunications. This paper proposes the development of planar circuits, such as antennas , frequency selective surfaces (FSS) and planar filters, using textile (cotton ticking, jeans and brim santista) as the dielectric substrate and the Pure Copper Polyester Taffeta Fabric, a textile of pure copper, highly conductive, lightweight and flexible, commercially sold as a conductive material. The electrical characteristics of textiles (electric permittivity and loss tangent) were characterized using the transmission line method (rectangular waveguide) and compared with those found in the literature. The structures were analyzed using commercial software Ansoft Designer and Ansoft HFSS, both from the company Ansys and for comparison we used the Iterative Method of Waves (WCIP). For the purpose of validation were built and measured several prototypes of antennas, planar filters and FSS, being possible to confirm an excellent agreement between simulated and measured results

Ionized-air-treated curaua fibers as reinforcement for phenolic matrices

Curaua fibers were treated with ionized air to improve the fiber/phenolic matrix adhesion.The treatment with ionized air did not change the thermal stability of the fibers. The impact strength increased with increase in the fiber treatment time. SEM micrographs of the fibers showed that the ionized air treatment led to separation of the fiber bundles. Treatment for 12 h also caused a partial degradation of the fibers, which prompted the matrix to transfer the load to a poorer reinforcing agent during impact, thereby decreasing the impact strength of the related composite. The composites reinforced with fibers treated with ionized air absorbed less water than those reinforced with untreated fibers.

Cellulose nanocomposites with nanofibres isolated from pineapple leaf fibers for medical applications

Nanocellulose is the crystalline domains obtained from renewable cellulosic sources, used to increase mechanical properties and biodegrability in polymer composites. This work has been to study how high pressure defibrillation and chemical purification affect the PALF fibre morphology from micro to nanoscale. Microscopy techniques and X-ray diffraction were used to study the structure and properties of the prepared nanofibers and composites. Microscopy studies showed that the used individualization processes lead to a unique morphology of interconnected web-like structure of PALF fibers. The produced nanofibers were bundles of cellulose fibers of widths ranging between 5 and 15 nm and estimated lengths of several micrometers. Percentage yield and aspect ratio of the nanofiber obtained by this technique is found to be very high in comparison with other conventional methods. The nanocomposites were prepared by means of compression moulding, by stacking the nanocellulose fibre mats between polyurethane films. The results showed that the nanofibrils reinforced the polyurethane efficiently. The addition of 5 wt% of cellulose nanofibrils to PU increased the strength nearly 300% and the stiffness by 2600%. The developed composites were utilized to fabricate various versatile medical implants. (C) 2011 Elsevier Ltd. All rights reserved.