Mass fractal characteristics of wet sonogels as determined by small-angle x-ray scattering and differential scanning calorimetry

Low density silica sonogels were prepared from acid sonohydrolysis of tetraethoxysilane. Wet gels were studied by small-angle x-ray scattering (SAXS) and differential scanning calorimetry (DSC). The DSC tests were carried out under a heating rate of 2 degrees C/min from -120 degrees C up to 30 degrees C. Aerogels were obtained by CO(2) supercritical extraction and characterized by nitrogen adsorption and SAXS. The DSC thermogram displays two distinct endothermic peaks. The first, a broad peak extending from about -80 degrees C up to practically 0 degrees C, was associated to the melting of ice nanocrystals with a crystal size distribution with pore diameter ranging from 1 or 2 nm up to about 60 nm, as estimated from Thomson's equation. The second, a sharp peak with onset temperature close to 0 degrees C, was attributed to the melting of macroscopic crystals. The DSC incremental nanopore volume distribution is in reasonable agreement with the incremental pore volume distribution of the aerogel as determined from nitrogen adsorption. No macroporosity was detected by nitrogen adsorption, probably because the adsorption method applies stress on the sample during measurement, leading to a underestimation of pore volume, or because often positive curvature of the solid surface is in aerogels, making the nitrogen condensation more difficult. According to the SAXS results, the solid network of the wet gels behaves as a mass fractal structure with mass fractal dimension D=2.20 +/- 0.01 in a characteristic length scale below xi=7.9 +/- 0.1 nm. The mass fractal characteristics of the wet gels have also been probed from DSC data by means of an earlier applied modeling for generation of a mass fractal from the incremental pore volume distribution curves. The results are shown to be in interesting agreement with the results from SAXS.

Synthetic control chart for monitoring the pprocess mean and variance

In this article, we consider the synthetic control chart with two-stage sampling (SyTS chart) to control the process mean and variance. During the first stage, one item of the sample is inspected; if its value X, is close to the target value of the process mean, then the sampling is interrupted. Otherwise, the sampling goes on to the second stage, where the remaining items are inspected and the statistic T = Sigma [x(i) - mu(0) + xi sigma(0)](2) is computed taking into account all items of the sample. The design parameter is function of X-1. When the statistic T is larger than a specified value, the sample is classified as nonconforming. According to the synthetic procedure, the signal is based on Conforming Run Length (CRL). The CRL is the number of samples taken from the process since the previous nonconforming sample until the occurrence of the next nonconforming sample. If the CRL is sufficiently small, then a signal is generated. A comparative study shows that the SyTS chart and the joint X and S charts with double sampling are very similar in performance. However, from the practical viewpoint, the SyTS chart is more convenient to administer than the joint charts.

The chemistry of enaminones, diazocarbonyls and small rings: our contribution

After thirty two years in Brazil and retired from Universidade Estadual de Campinas the author wishes to present this account, a summary of a large part of the research in synthetic methodology developed by the research groups of Albert J. Kascheres and the author at Universidade Estadual de Campinas Chemistry Institute. Contributions have been made to the area of enaminones, diazocarbonyls, cyclopropenones and azirines.

Effect of intraluminal distention on microvascular perfusion in the equine small colon

Objective-To determine the effect of experimental intraluminal distention on microvascular perfusion of the small colon in horses.Animals-6 mixed-breed healthy horses (mean age [+/- SD], 9.1 +/- 2 years).Procedure-Under general anesthesia, the small colon was exposed by celiotomy and 3 segments were demarcated. In 1 of these segments, intraluminal obstruction was created by placement of a latex balloon inflated to a pressure of 40 mm Hg (obstructed segment). The other segments were the sham-operated segment and the control segment. Microvascular perfusion was evaluated in the mucosal, submucosal, muscular, and serosal layers by injection of 15-mum-diameter colored microspheres into branches of the caudal mesenteric artery. Recovery of microspheres was performed by tissue digestion, washing, and centrifugation. Distribution of microspheres in the intestinal layers was evaluated by direct observation of stained frozen sections by light microscopy.Results-A significant reduction was observed in total microvascular perfusion of obstructed segments, which was 26.4% of that of control segments. This reduction was not evident in the mucosal layer.Conclusions and Clinical Relevance-Intraluminal distention of the equine small colon wall can promote ischemia by a reduction in microvascular perfusion in the intestinal wall. Intestinal layers do not seem to be affected to the same extent, because the absolute value for mucosal perfusion did not decrease in the obstructed segment.

Synthetic and natural polycations for gene therapy: State of the art and new perspectives

Currently, the major drawback of gene therapy is the gene transfection rate. The two main types of vectors that. are used in gene therapy are based on viral or non-viral gene delivery systems. There are several non-viral systems that can be used to transfer foreign genetic material into the human body. In order to do so, the DNA to be transferred must escape the processes that affect the disposition of macromolecules. These processes include the interaction with blood components, vascular endothelial cells and uptake by the reticuloendothelial system. Furthermore, the degradation of therapeutic DNA by serum nucleases is also a potential obstacle for functional delivery to the target cell. Cationic polymers have a great potential for DNA complexation and may be useful as non-viral vectors for gene therapy applications. The objective of this review was to address the state of the art in gene therapy using synthetic and natural polycations and the latest strategies to improve the efficiency of gene transfer into the cell.

Nanocomposites of Styrene-Butadiene Rubber and Synthetic Anatase Obtained by a Colloidal Route and Their Photooxidation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Biodegradable Nanoparticles Containing Benzopsoralens: An Attractive Strategy for Modifying Vascular Function in Pathological Skin Disorders

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Size, electrophoretic mobility, and ion dissociation of vesicles prepared with synthetic amphiphiles

Vesicles prepared with synthetic amphiphiles (dioctadecyldimethylammonium bromide and chloride, dihexadecyl phosphate and its sodium salt) were obtained by sonication, ethanol injections, and chloroform injections. The hydrodynamic diameter of vesicles (Dh), estimated from the diffusivity measured by quasielastic light scattering, ranged from 230 to 3000 Å. The electrophoretic mobility (Um) was measured by free-flow electrophoresis. The zeta potential (ζ) and the degree of counterion dissociation (α) of the vesicles were calculated from Um and conductivity data, α decreased with increasing Dh of the vesicles, probably due to the decreasing headgroup area and the increasing counterion association needed to relax the surface electrostatic potential. The electrophoretic mobility was also calculated (Uc) according to an impenetrable, nonconducting sphere model with a spherically symmetric charge distribution approximation. Within the limits of the experimental error(s) of the (different) methods employed and the assumptions made in the calculations, the fact that the Um/Uc ratio ranged from 1.3 to 7.5 was considered to be a good agreement between the calculated and the experimental values. © 1990 American Chemical Society.

Fruit and seed exploitation by small rodents of the Brazilian Atlantic forest

In the Brazilian Atlantic forest (BAF) there are at least 57 rodent species and most of them are considered omnivorous. These species feed, more or less frequently, on fruits and seeds. Nevertheless the potential role of each species as frugivorous, seed predator or seed disperser is still unclear. In the present study we analyzed patterns of fruit and seed exploitation by eight small rodent species from an Atlantic Forest site. We offered to captive animals fruits of 30 plant species (23 genera, 15 families). After 48 h we recorded consumption patterns of pulp/aril and seed. Rodent species differed in their patterns of fruit and seed exploitation. The smallest species, Akodon serrensis, Oligoryzomys nigripes, and Wilfredomys pictipes (body size range : 26-45 g), and also the medium-sized Oecomys aff. concolor (84 g) fed mainly on pulp and also on small to medium-sized seeds (< 10 mm diameter). The medium-sized rodent, Oryzomys russatus (91 g) fed on pulp and also on seeds with diameter ≤ 15 mm. Thus larger seeds remain intact after being manipulated by such species. The medium-sized Delomys dorsalis (72 g) and the larger Trinomys iheringi (274 g) and Nectomys squamipes (253 g) form a third group, which consumed both fruit and seed of most species independent of their size. These later two species and also O. russatus are probably the main seed predators in the rodent community of the BAF.

Caracterização anatômica da folha de Cymbopogon citratus (DC.) Stapf (Poaceae) e perfil químico do óleo essencial

The objective of the work was to accomplish an anatomical and ultrastructural study of mature leaf of Cymbopogon citratus (Poaceae) and analyze the essential oil through Gas Chromatography (GC). For the anatomical study, the material was fixed in FAA, followed bytheethyl dehydration and infiltration of the material in synthetic resin. For the ultrastructural study, the material was fixed and Kamovsky, dehydrated in acetone, dried to the critical point and metallized. For the analysis in GC, the essential oil it was obtained by steam distillation of leaves and analyzed by Gas Chromatography. Through the anatomical study it was observed that the faces of mesophyll are distinctly, the bulliform cells occupy the adaxial surface of the leaf and in the medium region are situated the biggest vascular bundles involved by sclerenchymatous hem with extensions reaching both epidermis. Between the biggest vascular bundles are observed three to five small vascular bundles, linkage only in the abaxial epidermis. Shortly, pointed and unicellular structures, called prickle-hair, had been observed inserted above the veins and micro-hair, that they consist of a long basal cell and an oval distal cell, that are located between the regions of vascular bundles. The chromatogram sample shows that the analyzed essential oil presented three majority components, responsible for 87% of the relative composition of the oil. These components are monoterpenos, justifying the strong smell of the essential oil.

Use of skin graft punch graft type for the healing of leg ulcers in treated Hansen's disease patients

Hansen's disease is an infectious illness caused by Mycobacterium leprae. It affects preferentially the skin and the peripheral nervous system leading to incapacities, such as leg ulcers, which happens due to the direct action of the bacillus on the organs or its indirect action on the peripheral nervous system. Leg ulcers can occur by two physiopathologic processes. There are many treatments for general leg ulcers, which include the ones caused by Hansen's disease sequels. Among them, surgical treatment shows to be effective when using skin graft, which can be performed by several techniques. Considering the low number of techniques known for treating leg ulcers in Hansen's disease sequels, the aims of this work were to standardize alternative techniques, to detect the main bacteria found in ulcer secretion cultures, to analyze the patients profile and the ulcers, to describe the histophatologies found, and to correlate these data with those of literature from all over the world. Skin graft punch type was carried out and analyzed; males had a mean age of 59.4 years old and females, 54.2 years old. Patients were 73.6% male and 26.3% female. Lepromatous type was present in 89.4% patients and tuberculoid type was seen in 10.5% of them. Associated systemic diseases were observed in 26.3% patients. Mean time of ulcers evolution was 11.6 years in male and 12.8 years in women. The average diameter of ulcers in the pre-treatment period was 8.5 X 9.5 cm in male and 10.2 X 6.8 cm in women. After the graft, their average diameters were 3.2 X 2.7 cm in male and 5.1 X 5.6 cm in women. Statistical analysis showed that there was no significant correlation between the ulcer diameter and its reduction or not in the post-surgery period (p=0.269732). The mean age of patients whose ulcers diameter did not change or reduced by only 20% was 63.5 years. Using the Spearman's coefficient, it was possible to observe that there was no significant correlation between the patients' age and the ulcers diameter reduction after the skin graft (p=0.222531). Evolution time of ulcers that did not present any satisfactory result in the post-surgery period was 12.1 years. The Spearman's coefficient showed that there was no significant correlation between the ulcers evolution time and the ulcers diameter reduction in the post-surgery period (p=0.191655). Cultures presented 50% of cases with Pseudomonas aeruginosa. Statistical analysis showed there is no correlation between the bacterial types found and the ulcer evolution in the post-surgery period (p=0.697531). The average of the ulcers diameter reduction was 42.4%, and in 26.3% of the patients the lesions disappeared after the skin graft.

Use of a synthetic lethal screen to identify genes related to TIF51A in Saccharomyces cerevisiae

The putative eukaryotic translation initiation factor 5A (eIF5A) is an essential protein for cell viability and the only cellular protein known to contain the unusual amino acid residue hypusine. eIF5A has been implicated in translation initiation, cell proliferation, nucleocytoplasmic transport, mRNA decay, and actin polarization, but the precise biological function of this protein is not clear. However, eIF5A was recently shown to be directly involved with the translational machinery. A screen for synthetic lethal mutations was carried out with one of the temperature-sensitive alleles of TIF51A (tif51A-3) to identify factors that functionally interact with eIF5A and revealed the essential gene YPT1. This gene encodes a small GTPase, a member of the rab family involved with secretion, acting in the vesicular trafficking between endoplasmatic reticulum and the Golgi. Thus, the synthetic lethality between TIF51A and YPT1 may reveal the connection between translation and the polarized distribution of membrane components, suggesting that these proteins work together in the cell to guarantee proper protein synthesis and secretion necessary for correct bud formation during G1/ S transition. Future studies will investigate the functional interaction between eIF5A and Ypt1 in order to clarify this involvement of eIF5A with vesicular trafficking. ©FUNPEC-RP.

Immunohistochemical, tomographic and histological study on onlay bone graft remodeling. Part II: Calvarial bone

Objectives: Little information is available on the molecular events that occur during graft incorporation over time. The calvarial bone (Cb) grafts have been reported to produce greater responses compared with other donor regions in maxillofacial reconstructions, but the scientific evidences for this are still lacking. The objectives of this study are (1) to study the morphological pattern of Cb onlay bone grafts and compare them with the biological events through immunohistochemical responses and (2) to establish the effects of perforations in maintaining the volume and bone density of the receptor bed. Material and methods: Sixty New Zealand White rabbits were submitted to Cb onlay bone grafts on the mandible. In 30 rabbits, the receptor bed was perforated (perforated group), while for the remaining animals the bed was kept intact (non-perforated group). Six animals from each group were sacrificed at 5, 7, 10, 20 and 60 days after surgery. Histological sections from the grafted area were prepared for immunohistochemical and histological analyses. Immuno-labeling was found for proteins Osteoprotegerin (OPG), receptor activator of nuclear factor-κβ ligand (RANKL), alkaline phosphatase (ALP), osteopontin (OPN), vascular endothelial growth factor (VEGF), tartrate-resistant acid phosphatase (TRAP), Type I collagen (COL I) and osteocalcin (OC). The tomography examination [computerized tomography (CT) scan] was conducted just after surgery and at the sacrifice. Results: The histological findings revealed that the perforations contributed to higher bone deposition during the initial stages at the graft-receptor bed interface, accelerating the graft incorporation process. The results of the CT scan showed lower resorption for the perforated group (P≤0.05), and both groups showed high bone density rates at 60 days. This set of evidences is corroborated by the immunohistochemical outcomes indicating that proteins associated with revascularization and osteogenesis (VEGF, OPN, TRAP and ALP) were found in higher levels in the perforated group. Conclusions: These findings indicate that the bone volume of calvarial grafts is better maintained when the receptor bed is perforated, probably resulting from more effective graft revascularization and greater bone deposition. The process of bone resorption peaked between 20 and 60 days post-operatively in both groups although significantly less in the perforated group. © 2009 John Wiley & Sons A/S.

Fracture resistance of bovine incisors restored with different glass fiber posts: Effect of the diameter of fiber post

Aim: Compare the effect of three post designs on the fracture resistance and failure modes of composite core-fiber post-crownless tooth sets. Materials and Methods: Ninety bovine incisors were selected and divided into nine groups of 10 specimens. The teeth were assigned to three groups based on the post design: Cylindrical, tapered, and double-tapered. Each group was subdivided into three subgroups in accordance with the diameter of the post: Small (No.1), medium (No.2), and large (No.3). The Panavia F system was used for post cementation. The specimens were mounted in acrylic resin blocks with a layer of silicone rubber covering the roots. A universal testing machine compressively loaded the specimens from the palatal side at a crosshead speed of 1 mm/min and at an angle of 135I to the long axis of the teeth, until failure occurred. The failure mode was determined by a stereomicroscope inspection of all the specimens. Data were analyzed by one-way ANOVA and the Tukey test (P < 0.05). Results: The fracture resistance was affected by the type of post (P < 0.0001). A narrower diameter for all of the post systems allowed for higher resistance. The main failure mode in the large cylindrical group was catastrophic fractures, while the main failures in the other eight groups were favorable. Conclusion: Narrower diameter posts showed higher fracture resistance. The dominant failure pattern was repairable fracture, except for those with large cylindrical groups.

Dispersed hydroxyapatite bioglass 45S5 composites: Comparative evaluation of the use of bovine bone and synthetic hydroxyapatite

The bovine bone and sintetic hydroxyapatite (HA) bioceramics are reference materials to employment as a bone substitute, however, their slow rate of degradation and its low rate of bioactivity index (Ib) are presented as limiting factors for application as bone graft. In contrast, the bioglass is a resorbable and osteoinductive material. the present work objective the development of composites of dispersed bovine bone or sintetic HA in silicate-phosphate bioglass, seeking to obtain a biomaterial with properties suitable for application as bone grafts. The composites were prepared by mixing between the powder components followed by sintering for 1h. Were used HA and bioglass (45S5) with particle size <240μm. The tested proportions of HA/45S5 were 20/80, 30/70 and 40/60 (wt%). The composites characterization was made employing scanning electron microscopy, Infra-Red Spectrometry and hydrolytic resistance test. The test results indicate the potential use of the materials developed for applications such as bone graft. © (2012) Trans Tech Publications, Switzerland.