Dynamics of Dissolved Forms of Carbon and Inorganic Nitrogen in Small Watersheds of the Coastal Atlantic Forest in Southeast Brazil

Based on the fact that streamwater quality reflects landscape conditions, the objectives of this study were: to investigate nitrogen (N), carbon (C), and major ion concentrations in six streams crossing minimally disturbed Atlantic Forest areas, with similar geomorphological characteristics; to determine N and C fluxes in one of these pristine streams (Indaia); and assess the impact of human activity on the biogeochemistry of two other streams in the same region, crossing urbanized areas. The distribution pattern of carbon and inorganic nitrogen dissolved forms, as well as the major ion and biogenic gas concentrations in the streamwater, was similar in pristine streams, indicating that the C and N dynamics were determined by influence of some factors, such as climate, atmospheric deposition, geology, soil type, and land covering, which were analogous in the forested watersheds. The urban streams were significantly different from the pristine streams, showing low dissolved oxygen concentrations, high respiration rates, and high concentrations of carbon dioxide, dissolved inorganic nitrogen, dissolved inorganic carbon, and major ion. These differences were attributed to anthropogenic impact on water quality, especially domestic sewage discharge. Additionally, in the Indaia stream, it was possible to observe the importance of rainfall over temporal dynamics of dissolved carbon forms, and also, the obtained specific flux of dissolved inorganic nitrogen was relatively elevated (approximately 11 kg ha(-1) year(-1)). These results reveal the influence of human activity over the biogeochemistry of coastal streams and also indicate the importance N export of Atlantic Forest to the ocean.

Lot sizing and furnace scheduling in small foundries

A lot sizing and scheduling problem prevalent in small market-driven foundries is studied. There are two related decision levels: (I the furnace scheduling of metal alloy production, and (2) moulding machine planning which specifies the type and size of production lots. A mixed integer programming (MIP) formulation of the problem is proposed, but is impractical to solve in reasonable computing time for non-small instances. As a result, a faster relax-and-fix (RF) approach is developed that can also be used on a rolling horizon basis where only immediate-term schedules are implemented. As well as a MIP method to solve the basic RF approach, three variants of a local search method are also developed and tested using instances based on the literature. Finally, foundry-based tests with a real-order book resulted in a very substantial reduction of delivery delays and finished inventory, better use of capacity, and much faster schedule definition compared to the foundry`s own practice. (c) 2006 Elsevier Ltd. All rights reserved.

Termination of diamond surfaces with hydrogen, oxygen and fluorine using a small, simple plasma gun

We have formed and characterized polycrystalline diamond films with surfaces having hydrogen terminations, oxygen terminations, or fluorine terminations, using a small, simple and novel plasma gun to bombard the diamond surface, formed by plasma assisted CVD in a prior step, with ions of the wanted terminating species. The potential differences between surface regions with different terminations were measured by Kelvin Force Microscopy (KFM). The highest potential occurred for oxygen termination regions and the lowest for fluorine. The potential difference between regions with oxygen terminations and hydrogen terminations was about 80 mV, and between regions with hydrogen terminations and fluorine terminations about 150 mV. Regions with different terminations were identified and imaged using the secondary electron signal provided by scanning electron microscopy (SEM). since this signal presents contrast for surfaces with different electrical properties. The wettability of the surfaces with different terminations was evaluated, measuring contact angles. The sample with oxygen termination was the most hydrophilic, with a contact angle of 75 degrees. hydrogen-terminated regions with 83 degrees, and fluorine regions 93 degrees, the most hydrophobic sample. (C) 2010 Elsevier B.V. All rights reserved.

EMISSIONS CHARACTERISTICS OF A RESIDENTIAL PELLET BOILER AND A STOVE

Gaseous and particulate emissions from a residential pellet boiler and a stove are measured at a realistic 6-day operation sequence and during steady state operation. The aim is to characterize the emissions during each phase in order to identify when the major part of the emissions occur to enable actions for emission reduction where the savings can be highest. The characterized emissions comprised carbon monoxide (CO), nitrogen oxide (NO), total organic carbon (TOC) and particulate matter (PM 2.5). In this study, emissions were characterised by mass concentration and emissions during start-up and stop phases were also presented in accumulated mass. The influence of start-up and stop phases on the emissions, average emission factors for the boiler and stove were analysed using the measured data from a six-days test. The share of start-up and stop emissions are significant for CO and TOC contributing 95% and 89% respectively at the 20kW boiler and 82% and 89% respectively at the 12 kW stove. NO and particles emissions are shown to dominate during stationary operation.

Feasibility analysis for biofuel production and investment recommendation

A FGV Projetos posiciona-se com destaque no desenvolvimento de projetos e estudos sobre biocombustíveis. Especialistas no assunto apontam para a viabilidade da produção de biocombustíveis em diversos países, e recomendam investimentos em toda a cadeia produtiva, específicos para cada localidade. Isso permitirá aos países que desejam reduzir a dependência por combustíveis fósseis, tais como o petróleo, a diversificação da matriz energética, o aumento do emprego no campo, e uma melhora do saldo comercial. Este documento apresenta síntese dos trabalhos realizados e em desenvolvimento, e tem como base os estudos de viabilidade para a produção de biocombustíveis de El Salvador e da República Dominicana.

Effects of trade policy on technology adoption and investment

This paper studies the consequences of trade policy for the adoption of new technologies. It develops a dynamic international trade model with two sectors. Workers in manufacturing decide if new technologies are used, capital owners then choose investment. We analyze three different arrangements: free trade, tariffs, and quotas. In the model economy, free trade as well as tariffs guarantee that the most productive technology available will be used. In contrasL under a quota the most productive technology available will not be used at all times. Further, in the latter case investment and the capital stock are smaller than in the former one. Finally, there exists parameter values for which the computed difference in GDP is a factor of thirty.

Effect of probiotic and prebiotic inclusion in weaned piglet diets on structure and ultra-structure of small intestine

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Risco de queda em idosos da comunidade: avaliação com o teste Timed up and go

Risco de queda em idosos pode ser avaliado por meio de um teste simples de mobilidade. OBJETIVO: Avaliar o equilíbrio de idosos usando o teste Timed up and go. MÉTODO: Os indivíduos tiveram o tempo medido desde o momento em que se levantaram de uma cadeira, caminharam 3 metros para a frente e retornaram à cadeira. Os idosos também responderam questões sobre desequilíbrio, tontura e queda. RESULTADOS: Cerca de 69% dos sujeitos realizaram o teste em até 19 segundos. Houve correlação significativa entre desequilíbrio, tempo dispendido e queda, assim como entre tontura e queda. CONCLUSÃO: A maior parte dos idosos mostrou baixos valores no teste, o que sugere boa mobilidade funcional. Entretanto, um número expressivo de indivíduos com valores mais elevados estão, provavelmente, mais propensos a quedas e à dependência menor ou maior nas atividades da vida diária.

Bottom-up and top-down effects in a pre-dispersal seed predation system: are non-predated seeds damaged?

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The effect of sodium chloride on the formation of W/O microemulsions in soy bean oil/surfactant/water systems and the solubilization of small hydrophilic molecules

Partial pseudoternary phase diagrams were constructed for soy bean oil (SBO)/surfactant/NaCl aqueous solution systems, at 25 degrees C, using the anionic sodium bis(2-ethylhexyl) sulfosuccinate (ACT) and zwiterionic phosphatidylcholine (PC) or mixtures of these surfactants. The isotropic single phase of water-in-oil (W/O) microemulsions (MEs) is shown in the phase diagram and their viscosity reported. ME samples containing small amount of surfactant exhibit slightly higher viscosity than pure SBO, and were used in the solubilization of small water soluble molecules. NaCl enhances the area of the ME phase and MEs with different surfactant composition exhibit different induction time as obtained from tests of oxidative stability, and so are the MEs enriched with ascorbic acid, folic acid and FeSO4, with the latter exhibiting lower stability. The so prepared enriched soy bean oil has potential application in food industry since the surfactants are food grade. (C) 2007 Elsevier B.V. All rights reserved.

Protected cerrado fragments grow up and lose even metapopulational birds in central São Paulo, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

The importance of excretion by Chironomus larvae on the internal loads of nitrogen and phosphorus in a small eutrophic urban reservoir

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Meso and microhabitat analysis and feeding habits of small nektonic characins (Teleostei: Characiformes) in Neotropical streams

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)