Influência de diferentes períodos de chuva após a aplicação de Clethodim, Quizalofope - P- Metilico e Haloxifope em pós emergência no controle de plantas daninhas

Pós-graduação em Agronomia (Proteção de Plantas) - FCA

Determinação da resistência à flexão de ligas odontológicas, utilizadas em prótese parcial fixa e prótese sobre implante, soldadas por brasagem e a laser

Pós-graduação em Odontologia Restauradora - ICT

Avaliação nutricional de silagem de restos culturais de abacaxi pérola

Pós-graduação em Zootecnia - FCAV

Dinâmica, eficácia e seletividade do diclosulam em condições de cana crua

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Higher Insulin Sensitivity and Impaired Insulin Secretion in Cachetic Solid Ehrlich Tumour-Bearing Mice

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Avaliação in vitro do pH do hidróxido de cálcio usado como medicação intracanal em associação com clorexidina e racealfatocoferol

Objective: The aim of this study was to evaluate the pH of calcium hydroxide (CalenTM) when associated or not with chlorhexidine 0.4%, and when associated with chlorhexidine with the addition of 20% or 10% of alphatocopherol (AchéTM), assessed in several periods of time. Methods: Fourty dentine tubes 20 mm, properly standardized, were made from bovine anterior teeth roots. Following, a perforation was achieved in the roots distal face at 7 mm from the cervical radicular line by using a #1/2 carbide bur. After complete root sealing is made, except in the perforation local, the radicular canals were filled with one of the following associations: Group I – Calen®; Group II – Calen™ with chlorehxidine at 0.4%; Group III – Calen™ with chlorhexidine at 0.4% with the addition of 20% (weight) of alhatocopherol compound and Group IV – Calen™ with chlorhexidine at 0.4% with the addition of 10% (weight) alphatocopherol. After cervical sealing is accomplished, the roots were immersed in water MiliQ and the pH, assessed in 24h, 7, 14, 21, 28 and 45 days. Results and Conclusion: In all periods tested, the pH of the calcium hydroxide (Calen™) was similar to the pH of the calcium hydroxide (Calen™) associated with chlorhexidine 0.4% and 10% alphatocopherol (p > 0.05). The association of 20% alphatocopherol obtained the pH lower than the association with 10% (p < 0.05). The pH of the association with chlorhexidine was similar to the pure calcium hydrocide (Calen™) after the 14th day (p > 0.05) only. Therefore, on the 45th day, this difference was significant again (p < 0.05).

Ultrassonografia de glândulas genitais acessórias em carneiros da raça Dorper: caracterização e correlações reprodutivas

Pós-graduação em Medicina Veterinária - FCAV

Mercury fractionation in dourada (Brachyplatystoma rousseauxii) of the Madeira River in Brazil using metalloproteomic strategies

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Baixa umidade do solo na eficácia de herbicidas aplicados em pré-emergência

The aim of this study was to evaluate the effect of low soil moisture on the efficacy of applying herbicides ametryn + clomazone, sulfentrazone and tebuthiuron in pre-emergence application submitted to simulated rainfalls at different time intervals after application in control of B. pilosa, C. echinatus and U. plantaginea plants. The experiment was carried out in pots with a capacity of 2.5 L in green-house conditions and experimental design was completely randomized with four replications, arranged in a 3x5 factorial (three herbicides and five rains intervals). The herbicides clomazone + ametryn (Sinerge EC) 5.0 L commercial product (cp) ha(-1), sulfentrazone (Boral 500 SC) 1.2 L cp ha(-1) and tebuthiuron (combine SC) 2.0 L cp ha(-1) were applied in pre-emergence and the precipitation of 20 mm were applied under de pots in five time intervals after the herbicide application (0h, 4h, 8h, 12h and 24hours). Visual evaluations of plants control that emerged plants were realized at 14 and 21 days after treatment application and the plant emergence percentage was calculated. The application of these three herbicides in dry soil then rain within 24 hours after application provided C. echinatus plants emergence, reduced B. pilosa emergency but in the end of the experiment effectively controlled these two species and U. plantaginea plants.

Potencial de lixiviação de herbicidas utilizados na cana-de-açúcar em solos contrastantes

The increased use of herbicides, coupled with inadequate use of these molecules, also increased concerns about the risks of environmental contamination and its effects on humans and animals. The objective of this work evaluates the potential for leaching of herbicides in the crop of cane sugar, in contrasting soils. Used samples were used Psament (NR - sandy texture) and Oxisol Red (LR - clay texture). After application of herbicides ametryne (NR 1.60 kg ha(-1) and LR 2.40 kg ha(-1)), clomazone (NR 0.90 kg ha(-1) and LR 1.10 kg ha(-1)) and diuron (NR 1.60 kg ha(-1) and LR 3.20 kg ha(-1)), were irrigated blades of 0, 20, 40, 60, 80 and 100 mm of water in soil columns. Results indicate that ametryne in NR samples submitted to the handling layer of 5-10 cm when applied blades of 20 and 40 mm of water. It was evident that the clomazone, regardless of the soil, did not exceed 0-5 cm water depths of 0 to 20 mm of water and 5-10 cm deep in the blades above 40 mm of water. With blades up to 80 mm, the diuron leaching only in layers 0-5 cm deep in LR. Conclude that the potential of leaching of diuron and ametryne was influenced by soil texture together with the organic matter content, the same was not true for clomazone.

Tratamento cirúrgico de ameloblastoma mandibular

Ameloblastomas are benign, invasive locally and highly recurrent. It is an odontogenic tumor, characterized by the proliferation of epithelial ameloblastic in a fibrous stroma. This paper reports a case of mandibular ameloblastoma, in patients 27 years of age without pain with developments around 4 years, with about 20 mm at its greatest extent, sessile base and surface coatings full. The treatment of choice was the surgical conservative

Effect of veneering material on the deformation suffered by implant-supported fixed prosthesis framework

The aim of this study was to evaluate the deformation suffered by cantilevered implant-supported fixed prostheses frameworks cast in silver-palladium alloy and coated with two occlusal veneering materials: acrylic resin or porcelain. Material and Methods: Two strain gauges were bonded to the inferior surface of the silver-palladium framework and two other were bonded to the occlusal surface of the prosthesis framework covered with ceramic and acrylic resin on each of its two halves. The framework was fixed to a metallic master model and a 35.2 N compression force was applied to the cantilever at 10, 15 and 20 mm from the most distal implant. The measurements of deformation by compression and tension were obtained. The statistical 2-way ANOVA test was used for individual analysis of the experiment variables and the Tukey test was used for the interrelation between all the variables (material and distance of force application). Results: The results showed that both variables had influence on the studied factors (deformation by compression and tension). Conclusion: The ceramic coating provided greater rigidity to the assembly and therefore less distortion compared with the uncoated framework and with the resin-coated framework. The cantilever arm length also influenced the prosthesis rigidity, causing higher deformation the farther the load was applied from the last implant.

Emissão de CO2 em um latossolo vermelho coberto com palha sob aplicação de efluente e lodo de esgoto

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Finite element analysis of bonded model Class I 'restorations' after shrinkage

Objectives. The C-Factor has been used widely to rationalize the changes in shrinkage stress occurring at the tooth/resin-composite interfaces. Experimentally, such stresses have been measured in a uniaxial direction between opposed parallel walls. The situation of adjoining cavity walls has been neglected. The aim was to investigate the hypothesis that: within stylized model rectangular cavities of constant volume and wall thickness, the interfacial shrinkage-stress at the adjoining cavity walls increases steadily as the C-Factor increases. Methods. Eight 3D-FEM restored Class I 'rectangular cavity' models were created by MSC.PATRAN/MSC.Marc, r2-2005 and subjected to 1% of shrinkage, while maintaining constant both the volume (20 mm(3)) and the wall thickness (2 mm), but varying the C-Factor (1.9-13.5). An adhesive contact between the composite and the teeth was incorporated. Polymerization shrinkage was simulated by analogy with thermal contraction. Principal stresses and strains were calculated. Peak values of maximum principal (MP) and maximum shear (MS) stresses from the different walls were displayed graphically as a function of C-Factor. The stress-peak association with C-Factor was evaluated by the Pearson correlation between the stress peak and the C-Factor. Results. The hypothesis was rejected: there was no clear increase of stress-peaks with C-Factor. The stress-peaks particularly expressed as MP and MS varied only slightly with increasing C-Factor. Lower stress-peaks were present at the pulpal floor in comparison to the stress at the axial walls. In general, MP and MS were similar when the axial wall dimensions were similar. The Pearson coefficient only expressed associations for the maximum principal stress at the ZX wall and the Z axis. Significance. Increase of the C-Factor did not lead to increase of the calculated stress-peaks in model rectangular Class I cavity walls. (C) 2011 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

The impact of climate on Leptospirosis in Sao Paulo, Brazil

In this work, we correlate the daily number of human leptospirosis cases with several climatic factors. We used a negative binomial model that considers hospital daily admissions due to leptospirosis as the dependent variable, and the climatic variables of daily precipitation pattern, and maximum and minimum temperature as independent variables. We calculated the monthly leptospirosis admission probabilities from the precipitation and maximum temperature variables. The month of February showed the highest probability, although values were also high during the spring months. The month of February also showed the highest number of hospital admissions. Another interesting result is that, for every 20 mm precipitation, there was an average increase of 31.5% in hospital admissions. Additionally, the relative risk of leptospirosis varied from 1.1 to 2.0 when the precipitation varied from 20 to 140 mm.