Fuzzy control of a water pump for an agricultural plant growth system

At the present time there is a high pressure toward the improvement of all the production processes. Those improvements can be sensed in several directions in particular those that involve energy efficiency. The definition of tight energy efficiency improvement policies is transversal to several operational areas ranging from industry to public services. As can be expected, agricultural processes are not immune to this tendency. This statement takes more severe contours when dealing with indoor productions where it is required to artificially control the climate inside the building or a partial growing zone. Regarding the latter, this paper presents an innovative system that improves energy efficiency of a trees growing platform. This new system requires the control of both a water pump and a gas heating system based on information provided by an array of sensors. In order to do this, a multi-input, multi-output regulator was implemented by means of a Fuzzy logic control strategy. Presented results show that it is possible to simultaneously keep track of the desired growing temperature set-point while maintaining actuators stress within an acceptable range.

Caracterização experimental de uma bomba ejetora

A opção de futuro incide sobre os processos de combustão em regime pobre e com baixos índices de formação de poluentes. Neste contexto, o presente trabalho estuda um ejetor de um queimador de gás propano, que equipa uma marmita utilizada para confeção de alimentos no Exército Português, para compreender o mecanismo de arrastamento de ar, com vista a identificar as causas que possam contribuir para uma diminuição da razão de equivalência da mistura ar/combustível. Estes queimadores são dispositivos de funcionamento estritamente mecânico e de conceção simples que permitem uma gama de potências caloríficas compreendidas entre 8 e 22 kW. Permitem uma boa estabilidade de chama que é um requisito fundamental de segurança. A regulação de potência é executada através de uma válvula de ajuste, contendo três posições, uma em que a alimentação se encontra cortada e as outras duas permitindo funcionar na potência mínima e máxima. De modo a efetuar o estudo do ejetor, numa primeira fase, submeteu-se o sistema a uma caracterização experimental do campo de escoamentos à entrada de ar do ejetor, a partir da técnica de diagnóstico Particle Image Velocimetry (PIV). Assim avalia-se de que forma o escoamento de ar exterior influencia o comportamento do escoamento da mistura de ar/combustível à saída do queimador. Numa segunda fase, recorre-se à técnica de diagnóstico Quimiluminescência para medição de espécies químicas, para avaliar o comportamento do ejetor a alterações de vários parâmetros, tais como caudal de combustível, área de entrada de ar e área de saída da mistura do difusor. Conclui-se que o ejetor mostrase "insensível" a alterações da área de saída e de entrada de ar, em relação ao valor médio da razão de equivalência. Porém observa-se que as misturas de ar/combustível são mais homogéneas quando as áreas de entrada, da saída e da garganta têm valores próximos.

Genetic algorithms with applications in wireless communications

Genetic algorithms (GAs) are known to locate the global optimal solution provided sufficient population and/or generation is used. Practically, a near-optimal satisfactory result can be found by Gas with a limited number of generations. In wireless communications, the exhaustive searching approach is widely applied to many techniques, such as maximum likelihood decoding (MLD) and distance spectrum (DS) techniques. The complexity of the exhaustive searching approach in the MLD or the DS technique is exponential in the number of transmit antennas and the size of the signal constellation for the multiple-input multiple-output (MIMO) communication systems. If a large number of antennas and a large size of signal constellations, e.g. PSK and QAM, are employed in the MIMO systems, the exhaustive searching approach becomes impractical and time consuming. In this paper, the GAs are applied to the MLD and DS techniques to provide a near-optimal performance with a reduced computational complexity for the MIMO systems. Two different GA-based efficient searching approaches are proposed for the MLD and DS techniques, respectively. The first proposed approach is based on a GA with sharing function method, which is employed to locate the multiple solutions of the distance spectrum for the Space-time Trellis Coded Orthogonal Frequency Division Multiplexing (STTC-OFDM) systems. The second approach is the GA-based MLD that attempts to find the closest point to the transmitted signal. The proposed approach can return a satisfactory result with a good initial signal vector provided to the GA. Through simulation results, it is shown that the proposed GA-based efficient searching approaches can achieve near-optimal performance, but with a lower searching complexity comparing with the original MLD and DS techniques for the MIMO systems.

A Bayesian approach to imposing curvature on distance functions

The estimated parameters of output distance functions frequently violate the monotonicity, quasi-convexity and convexity constraints implied by economic theory, leading to estimated elasticities and shadow prices that are incorrectly signed, and ultimately to perverse conclusions concerning the effects of input and output changes on productivity growth and relative efficiency levels. We show how a Bayesian approach can be used to impose these constraints on the parameters of a translog output distance function. Implementing the approach involves the use of a Gibbs sampler with data augmentation. A Metropolis-Hastings algorithm is also used within the Gibbs to simulate observations from truncated pdfs. Our methods are developed for the case where panel data is available and technical inefficiency effects are assumed to be time-invariant. Two models-a fixed effects model and a random effects model-are developed and applied to panel data on 17 European railways. We observe significant changes in estimated elasticities and shadow price ratios when regularity restrictions are imposed. (c) 2004 Elsevier B.V. All rights reserved.

Procedures and parameters in the real-time program refinement calculus

The real-time refinement calculus is a formal method for the systematic derivation of real-time programs from real-time specifications in a style similar to the non-real-time refinement calculi of Back and Morgan. In this paper we extend the real-time refinement calculus with procedures and provide refinement rules for refining real-time specifications to procedure calls. A real-time specification can include constraints on, not only what outputs are produced, but also when they are produced. The derived programs can also include time constraints oil when certain points in the program must be reached; these are expressed in the form of deadline commands. Such programs are machine independent. An important consequence of the approach taken is that, not only are the specifications machine independent, but the whole refinement process is machine independent. To implement the machine independent code on a target machine one has a separate task of showing that the compiled machine code will reach all its deadlines before they expire. For real-time programs, externally observable input and output variables are essential. These differ from local variables in that their values are observable over the duration of the execution of the program. Hence procedures require input and output parameter mechanisms that are references to the actual parameters so that changes to external inputs are observable within the procedure and changes to output parameters are externally observable. In addition, we allow value and result parameters. These may be auxiliary parameters, which are used for reasoning about the correctness of real-time programs as well as in the expression of timing deadlines, but do not lead to any code being generated for them by a compiler. (c) 2006 Elsevier B.V. All rights reserved.

Investigations into diversity of A 2x2 MIMO system with the use of an indoor testbed

This paper presents investigations into an indoor 2×2 multiple input multiple output (MIMO) system, whose diversity performance is assessed using a high precision test-bed. In this system, transmitter and receiver are equipped with 180° or 90° 3dB hybrids with their two output ports terminated with co-polar monopole antennas. By feeding a signal to one of the two input ports of the hybrid (while the other input port is matched terminated) different communication channels in a rich-scattering environment can be created. The test-bed allows for the signal strength measurements around the receiver/ transmitter sides for a given feeding configuration of hybrids when the receiver is moved over a circular region in an indoor environment. The signal strengths maps obtained for various modes of this 2×2 MIMO system are foundations for investigating transmit/receive diversity schemes. As the signal strength measurement results are obtained with Bluetooth modules operating in the ISM 2.4 GHz, the results are of importance to many other wireless systems that aim at utilizing MIMO diversity schemes to enhance their performance in this frequency band.

Investigations into an optimal transmission scheme for a MIMO system operating in a ricain fading environment

This paper describes investigations into an optimal transmission scheme for a multiple input multiple output (MIMO) system operating in a Rician fading environment. The considerations are reduced to determining a covariance matrix of transmitted signals which maximizes the MIMO capacity under the condition that the receiver has perfect knowledge of the channel while the transmitter has the information about selected statistical quantities which are measured at the receiver. An optimal covariance matrix, which requires information of the Rice factor and the signal to noise ratio, is determined. The transmission scheme relying on the choice of the proposed covariance matrix outperforms the other transmission schemes which were reported earlier in the literature. The proposed scheme realizes an upper bound limit for the MIMO capacity under arbitrary Rician fading conditions. ©2005 IEEE

A simple electromagnetic model for understanding the operation of a MIMO system

Recent years have witnessed intense research in multiple input multiple output (MIMO) wireless communications systems, which use multiple element antennas (MEA) for signal transmission and reception. In this paper, we have described a novel electromagnetic model to investigate the effect of mutual coupling, inter-element spacing and array geometry on the capacity of MIMO systems. Simulation results have been presented illustrating the application of the proposed model. The presented model concept stems from a hollow waveguide analogue. Using this model other aspects such as richness of scattering environment (spacing and clustering), the effect of hard versus soft scatterers and pin hole effect can be investigated.

Investigations into the effect of LOS signal blocking on capacity of an indoor MIMO system

In indoor environments the properties of communication channel are affected by the presence of various objects which block the Line Of Sight signal propagation. For example, this occurs because of presence of movement of humans and furniture. In this paper, the effect of reflection and scattering due to the presence of such objects is studied with respect to the capacity of a multiple input multiple output (MIMO) wireless system. The carried out investigations are performed by applying a simple electromagnetic model, in which transmitting and receiving antennas of MIMO system, as well as signal blocking objects, are represented by wire dipoles. In order to provide a fair assessment, calculations of MIMO capacity are performed under both fixed transmitted power and fixed received power conditions.

Design of MIMO testbed with an FPGA board for fast signal processing

This paper describes the design of a Multiple Input Multiple Output testbed for assessing various MIMO transmission schemes in rich scattering indoor environments. In the undertaken design, a Field Programmable Gate Array (FPGA) board is used for fast processing of Intermediate Frequency signals. At the present stage, the testbed performance is assessed when the channel emulator between transmitter and receiver modules is introduced. Here, the results are presented for the case when a 2x2 Alamouti scheme for space time coding/decoding at transmitter and receiver is used. Various programming details of the FPGA board along with the obtained simulation results are reported

The Hierarchical Structure of the Firm: A Geometric Perspective

This paper incorporates hierarchical structure into the neoclassical theory of the firm. Firms are hierarchical in two respects: the organization of workers in production and the wage structure. The firm’s hierarchy is represented as the sector of a circle, where the radius represents the hierarchy’s height, the width of the sector represents the breadth of the hierarchy at a given height, and the angle of the sector represents span of control for any given supervisor. A perfectly competitive firm then chooses height and width, as well as capital inputs, in order to maximize profit. We analyze the short run and long run impact of changes in scale economies, input substitutability and input and output prices on the firm’s hierarchical structure. We find that the firm unambiguously becomes more hierarchical as the specialization of its workers increases or as its output price increases relative to input prices. The effect of changes in scale economies is contingent on the output price. The model also brings forth an analysis of wage inequality within the firm, which is found to be independent of technological considerations, and only depends on the firm’s wage schedule.

Microphone and loudspeaker arrays for room acoustic measurements

A multichannel spherical speaker array allows, together with a spherical microphones array, the measurement of the MIMO (Multiple Input Multiple Output) acoustic impulse response of an environment capturing meaningful information about propagation of sound between source an receiver. The mathematical framework for extracting arbitrary directivity virtual microphones from real microphones array signals is recalled and the application of the same method to the speakers array to generate arbitrary directivity source is presented. A convenient solutions for the construction and calibration of speakers spherical array for measurement purposes is illustrated. The postprocessing technique developed to compute and visualize acoustic path between source and receiver from measured MIMO impulse response is discussed. Real word results from measurement in a small theater are shown.

PADRÕES DE PRODUTIVIDADE EM PESQUISA NA LITERATURA DE FINANÇAS: UM ESTUDO BIBLIOMÉTRICO NOS PRINCIPAIS PERIÓDICOS CIENTÍFICOS NACIONAIS NO PERÍODO DE 2005 A 2014

A Administração Financeira surge no início do século XIX juntamente com o movimento de consolidação das grandes empresas e a formação dos mercados nacionais americano enquanto que no Brasil os primeiros estudos ocorrem a partir da segunda metade do século XX. Desde entãoo país conseguiu consolidar alguns centros de excelência em pesquisa, formar grupo significativo de pesquisadores seniores e expandir as áreas de pesquisa no campo, contudo, ainda são poucos os trabalhos que buscam retratar as características da produtividade científica em Finanças. Buscando contribuir para a melhor compreensão do comportamento produtivo dessa área a presente pesquisa estuda sua produção científica, materializada na forma de artigos digitais, publicados em 24 conceituados periódicos nacionais classificados nos estratos Qualis/CAPES A2, B1 e B2 da Área de Administração, Ciências Contábeis e Turismo. Para tanto são aplicadas a Lei de Bradford, Lei do Elitismo de Price e Lei de Lotka. Pela Lei de Bradford são identificadas três zonas de produtividade sendo o núcleo formado por três revistas, estando uma delas classificada no estrato Qualis/CAPES B2, o que evidencia a limitação de um recorte tendo como único critério a classificação Qualis/CAPES. Para a Lei do Elitismo de Price, seja pela contagem direta ou completa, não identificamos comportamento de uma elite semelhante ao apontado pela teoria e que conta com grande número de autores com apenas uma publicação.Aplicando-se o modelo do Poder Inverso Generalizado, calculado por Mínimos Quadrados Ordinários (MQO), verificamos que produtividade dos pesquisadores, quando feita pela contagem direta, se adequa àquela definida pela Lei de Lotka ao nível de α = 0,01 de significância, contudo, pela contagem completa não podemos confirmar a hipótese de homogeneidade das distribuições, além do fato de que nas duas contagens a produtividade analisada pelo parâmetro n é maior que 2 e, portanto, a produtividade do pesquisadores de finanças é menor que a defendida pela teoria.

Threshold-induced phase transitions in perceptrons

Error rates of a Boolean perceptron with threshold and either spherical or Ising constraint on the weight vector are calculated for storing patterns from biased input and output distributions derived within a one-step replica symmetry breaking (RSB) treatment. For unbiased output distribution and non-zero stability of the patterns, we find a critical load, α p, above which two solutions to the saddlepoint equations appear; one with higher free energy and zero threshold and a dominant solution with non-zero threshold. We examine this second-order phase transition and the dependence of α p on the required pattern stability, κ, for both one-step RSB and replica symmetry (RS) in the spherical case and for one-step RSB in the Ising case.

Learner initiative in the language classroom

This article looks at learner initiative in teacher-fronted activities and how this can influence classroom interaction. Extracts from lesson transcripts of adult evening classes in Italy are used to give a precise definition of what is meant by learner initiative and to illustrate how it can change interaction patterns. It is suggested that learner initiative could have an important role to play in promoting comprehensible input and output and therefore language learning. It will be seen how, by giving learners more space and time, initiative can be actively encouraged. However, there are direct implications for teacher training as it is necessary to change traditional interaction patterns and make learner initiative more effective.