Quality planning based on risk assessment

Product quality planning is a fundamental part of quality assurance in manufacturing. It is composed of the distribution of quality aims over each phase in product development and the deployment of quality operations and resources to accomplish these aims. This paper proposes a quality planning methodology based on risk assessment and the planning tasks of product development are translated into evaluation of risk priorities. Firstly, a comprehensive model for quality planning is developed to address the deficiencies of traditional quality function deployment (QFD) based quality planning. Secondly, a novel failure knowledge base (FKB) based method is discussed. Then a mathematical method and algorithm of risk assessment is presented for target decomposition, measure selection, and sequence optimization. Finally, the proposed methodology has been implemented in a web based prototype software system, QQ-Planning, to solve the problem of quality planning regarding the distribution of quality targets and the deployment of quality resources, in such a way that the product requirements are satisfied and the enterprise resources are highly utilized. © Springer-Verlag Berlin Heidelberg 2010.

Sex offender risk assessment and management in Ireland

This research examined sex offender risk assessment and management in Ireland. It focused on the statutory agencies with primary responsibility (Garda Síochána and the Probation Service). The goal was to document the historical, contextual and current systems, in addition to identifying areas of concern/improvements. The research was a mixed-methods approach. Eight studies were conducted. This incorporated documentary reviews of four Commission to Inquire Reports, qualitative interviews/focus groups with Garda staff, Probation Service staff, statutory agencies, community stakeholders, various Non-Governmental Organisations (NGOs) and sex offenders. Quantitative questionnaires were also administered to Garda staff. In all over 70 interviews were conducted and questionnaires were forwarded to 270 Garda members. The overall findings are: •Sex offender management in Ireland has become formal only since 2001. Knowledge, skills and expertise is in its infancy and is still evolving. •Mixed reviews and questions regarding fitness for purpose of currently used risk assessments tools were noted. •The Sex Offender Act 2001 requires additional elements to ensure safe sex offender monitoring and public protection. A judicial review of the Sex Offender Act 2001 was recommended by many respondents. •Interagency working under SORAM was hugely welcomed. The sharing of information has been welcomed by managing agencies as the key benefit to improving sex offender management. •Respondents reported that in practice, sex offender management in Ireland is fragmented and unevenly implemented. The research concluded that an independent National Sex Offender Authority should be established as an oversight and regulatory body for policy, strategy and direction in sex offender management. Further areas of research were also highlighted: ongoing evaluation and audits of the joint agency process and systems in place; recidivism studies tracking the risk assessment ratings and subsequent offending; and an evaluation of the current status of sex offender housing in Ireland.

Nanotechnology in food industry II: risk assessment and legislation

Currently, there is increasing use of nanomaterials in the food industry thanks to the many advantages offered and make the products that contain them more competitive in the market. Their physicochemical properties often differ from those of bulk materials, which require specialized risk assessment. This should cover the risks to the health of workers and consumers as well as possible environmental risks. The risk assessment methods must go updating due to more widespread use of nanomaterials, especially now that are making their way down to consumer products. Today there is no specific legislation for nanomaterials, but there are several european dispositions and regulations that include them. This review gives an overview of the risk assessment and the existing current legislation regarding the use of nanotechnology in the food industry.

Multiphase flow in porous media: meta-modeling techniques for sensitivity analysis and risk assessment

One of the biggest challenges that contaminant hydrogeology is facing, is how to adequately address the uncertainty associated with model predictions. Uncertainty arise from multiple sources, such as: interpretative error, calibration accuracy, parameter sensitivity and variability. This critical issue needs to be properly addressed in order to support environmental decision-making processes. In this study, we perform Global Sensitivity Analysis (GSA) on a contaminant transport model for the assessment of hydrocarbon concentration in groundwater. We provide a quantification of the environmental impact and, given the incomplete knowledge of hydrogeological parameters, we evaluate which are the most influential, requiring greater accuracy in the calibration process. Parameters are treated as random variables and a variance-based GSA is performed in a optimized numerical Monte Carlo framework. The Sobol indices are adopted as sensitivity measures and they are computed by employing meta-models to characterize the migration process, while reducing the computational cost of the analysis. The proposed methodology allows us to: extend the number of Monte Carlo iterations, identify the influence of uncertain parameters and lead to considerable saving computational time obtaining an acceptable accuracy.

Older Adult Injury Risk Assessment in the Driving and Occupational Environments

Thesis (Ph.D.)--University of Washington, 2016-08

Global, regional, and national comparative risk assessment of 79 behavioural, environmental and occupational, and metabolic risks or clusters of risks in 188 countries, 1990-2013 : a systematic analysis for the Global Burden of Disease Study 2013

Global, regional, and national comparative risk assessment of 79 behavioral, environmental and occupational, and metabolic risks or clusters of risks, 1990–2015 : a systematic analysis for the Global Burden of Disease Study 2015

Risk assessment of exposure to multiple mycotoxins in food

Moulds may produce a diversity of toxins such as aflatoxins, ochratoxins, trichothecenes, zearalenone, fumonisins and others. Although toxicological, environmental and epidemiological studies have addressed the problem of these toxins one by one, more than one mycotoxin are found usually in the same contaminated food. Risk assessment for humans potentially exposed to multimycotoxins suffers very much from the lack of adequate food consumption data. Furthermore, for a given mycotoxin, synergism and antagonism with other mycotoxins, found in the same food commodities, are not taken into account. Aflatoxin B1 and ochratoxin A belong to the most frequently occurring mycotoxins. This has repeatedly been demonstrated, however, normally, the risk resulting from their simultaneous occurrence is not considered. A descriptive study was developed to monitor air fungal contamination in one hospital food unit.

A national coastal erosion risk assessment for Scotland

The geography of Scotland, with a highly undulating hinterland, long and indented coastline, together with a large number of islands, means that much social and economic activity is largely located at the coast. The importance of the coast is further highlighted by the large number of ecosystem services derived from the coast. The threat posed by climate change, particularly current and future sea level rise, is of considerable concern and the associated coastal erosion and coastal flooding has the potential to have a substantial effect on the socioeconomic activity of the whole country. Currently, the knowledge base of coastal erosion is poor, which serves to hinder the current and future management of the coast. This research reported here aimed to establish four key aspects of coastal erosion within Scotland: the physical susceptibility of the coast to erosion; the assets exposed to coastal erosion; the vulnerability of communities to coastal erosion; and the coastal erosion risk to those communities. Coastal erosion susceptibility was modelled here within a GIS, using data for ground elevation, rockhead elevation, wave exposure and proximity to the open coast. Combining these data produced the Underlying Physical Susceptibility Model (UPSM), in the form of a 50 m2 raster of national coverage. The Coastal Erosion Susceptibility Model (CESM) was produced with the addition of sediment supply and coastal defence data, which then moderates the outputs of the UPSM. Asset data for dwellings, key assets, transport infrastructure, historic assets, and natural assets were used along with the UPSM and CESM to assess their degree of exposure to coastal erosion. A Coastal Erosion Vulnerability Model (CEVM) was produced using Experian Mosaic Scotland (a geodemographic classification which identifies 44 different social groups within Scotland) to classify populations based upon 11 vulnerability variables. Dwellings were assigned a CESM and CEVM score in order to establish their coastal erosion risk. This research demonstrated that the issue of coastal erosion will impact on a relatively low number of properties compared to those impacted by flooding (both coastal and fluvial) as many dwellings are already protected by coastal defences. There is therefore, a considerable future liability, and great pressure for coastal defences to be maintained and upgraded in their current form. The use of the CEVM is a novel inclusion within a coastal erosion assessment for Scotland. Use of the CEVM established that coastal erosion risk is not distributed equally amongst the Scottish coastal population and highlighted that risk can be reduced by either reducing exposure or reducing vulnerability. Thus far in Scotland, reducing exposure has been the primary management approach, which has a number of implications with regards social justice. This research identified the existing data gaps that should be addressed by future research in order to further improve coastal management in Scotland. Future research should focus on assessing historical coastal change rates on a national scale, improve modelling of national scale wave exposure, enhance the information held about current coastal defences and, determine the direct and indirect economic cost associated with the loss of different asset types. It is also necessary to clarify the social justice implications of using adaptation approaches to manage coastal erosion as well as establishing a method to communicate the susceptibility, exposure, vulnerability and risk aspects whilst minimising the potential negative impacts (e.g. property blight) of releasing such information.

Exposure and risk assessment in occupational exposure to fungi: aspects to consider in highly contaminated settings

Although a clear correlation between levels of fungi in the air and health impacts has not been shown in epidemiological studies, fungi must be regarded as potential occupational health hazards. Fungi can have an impact on human health in four different ways: (1) they can infect humans, (2) they may act as allergens, (3) they can be toxigenic, or (4) they may cause inflammatory reactions. Fungi of concern in occupational hygiene are mostly non-pathogenic or facultative pathogenic (opportunistic) species, but are relevant as allergens and mycotoxins producers. It is known that the exclusive use of conventional methods for fungal quantification (fungal culture) may underestimate the results due to different reasons. The incubation temperature chosen will not be the most suitable for every fungal species, resulting in the inhibition of some species and the favouring of others. Differences in fungi growth rates may also result in data underestimation, since the fungal species with higher growth rates may inhibit others species’ growth. Finally, underestimated data can result from non-viable fungal particles that may have been collected or fungal species that do not grow in the culture media used, although these species may have clinical relevance in the context. Due to these constraints occupational exposure assessment, in setings with high fungal contamination levels, should follow these steps: Apply conventional methods to obtain fungal load information (air and surfaces) regarding the most critical scenario previously selected; Guideline comparation aplying or legal requirements or suggested limits by scientific and/or technical organizations. We should also compare our results with others from the same setting (if there is any); Select the most suitable indicators for each setting and apply conventional-culture methods and also molecular tools. These methodology will ensure a more real characterization of fungal burden in each setting and, consequently, permits to identify further measures regarding assessment of fungal metabolites, and also a more adequate workers health surveillance. The methodology applied to characterize fungal burden in several occupational environments, focused in Aspergillus spp. prevalence, will be present and discussed.

Occupational exposure to mycotoxins: aspects to consider for the aggregate and cumulative risk assessment

Mycotoxins are an important group of naturally occurring substances known to contaminate a huge variety of agricultural products, feed and food commodities. The main concern is their widespread presence and toxic effects on humans and animals as they have been described as cytotoxic, nephrotoxic, hepatotoxic, teratogenic, immunosuppressive, mutagenic and/or carcinogenic. However, until now, risk assessments and regulations have usually been performed on individual mycotoxins despite humans and animals are being frequently exposed to a multitude of mycotoxins simultaneously. Moreover, even though some exposures through inhalation and dermal contact may potentially occur, only oral ingestion has been considered as the sole route of exposure in all the evaluations. However, more recent studies have also demonstrated airborne exposure to mycotoxins in different occupational settings with emphasis on agricultural professions. In these cases, skin contact with mold-infested substrates and inhalation of spore-borne toxins are the most important sources of exposure. Still, mycotoxins are not normally recongnize as na occupational hazard and exposure is different from the one ocurring by food intake. In this case, exposure is charaterized to be acute and simultaneous to other mycotoxins and also to fungi and dust. All these features increase the challenge implicated in the risk assessment process. Some topics will be presented and discussed in detailed such as: What occupational settings should be consider in this case; possible exposure routes; exposure characterization; how to assess exposure; co-exposure; aggregate exposure and cumulative risk assessment.

Principles of toxicology applied to nanotechnology: risk assessment

Background: Nanotechnologies are developing very rapidly and nanomaterials (NMs) are increasingly being used in a wide range of applications in science, industry and biomedicine.

Contribute of the MYCOMIX project and future perspectives for Human Biomonitoring and health risk assessment in Portugal

There is a growing concern within public health about mycotoxin involvement in human diseases, namely those related to children. The MycoMix project (2012-2015), funded by the Portuguese Foundation for Science and Technology, gathered a multidisciplinary team aiming at answering several questions: 1) Are Portuguese children exposed daily to one or several mycotoxins through food? 2) Can this co-exposure affect children´s health? and 3) Are there interaction effect between mycotoxins? Mycomix results revealed that Portuguese children (< 3 years old, n=103) are exposed to multiple mycotoxins through food consumption. Cumulative risk assessment results revealed a potential health concern for the high percentiles of intake, specially for aflatoxins which are carcinogenic compounds. This fact assumes particular importance considering the interactive effects found in in vitro bioassays. These results highlight the need for a more accurate approach to assess the human exposure to mycotoxins6. Within the Mycomix project the assessment of mycotoxin exposure was based on calculations combining mycotoxin data in food with population data on food consumption. This approach does not consider some aspects as the inter-individual metabolism variation, the exposure through sources other than food and the heterogeneous distribution of mycotoxins in food. Exposure assessment of mycotoxins in Portuguese population through biomarkers is still missing and further studies are urgent to be developed. The European Human Biomonitoring Initiative (EHBMI), a proposal within the European Joint Programme, aims to advance the understanding of the extent of exposure to environmental chemicals across Europe and the impact on human health, by gathering national expertise in human biomonitoring domain. At national level Mycomix project uncovered the potential health risk of exposure of Portuguese children to multiple mycotoxins. The risk assessment expertise acquired within Mycomix, namely in analysis and toxicology of chemical mixtures, will be brought together as a contribute to EHBMI objectives.