Interdisciplinary knowledge transfer and technological applications for assessment, strengthening and monitoring of timber structures in Europe

COST (European Co-operation in the field of scientific and technical research) is the longest running framework for research co-operation iri Europe, having been established in 1971 by a Ministerial Conference attended by Ministers for Science and Technology from 19 countries. Today COST is used by the scientific communities of 35 European countries to cooperate in exchanging knowledge and technology developed within research projects supported by national or European funds. The main objective of COST is to contribute to the realization of the European Research Área (ERA) anticipating and complementing the activities of the' Framework Programmes, constituting a "bridge" towards the scientific communities of emerging countries, increasing the mobility of researchers across Europe and fostering the establishment of "Networks of Excelience". Another essential objective is the knowledge transfer between the scientific soc'iety and industry. It is widely acknowledged that European scientific performance in relation to investment in science is excellent but technological and commercial performance has steadily worsened. The present paper discusses how the COST Action's instruments, from training schools to short scientific missions and workshops have been used within The COST ACTION FP11O1 Assessment, Reinforcement and Monitoring of Timber Structures to achieve such objectives.

Transfer zone of prestressed CFRP reinforcement applied according to NSM technique for strengthening of RC structures

This study presents an experimental program to assess the tensile strain distribution along prestressed carbon fiber reinforced polymer (CFRP) reinforcement flexurally applied on the tensile surface of RC beams according to near surface mounted (NSM) technique. Moreover, the current study aims to propose an analytical formulation, with a design framework, for the prediction of distribution of CFRP tensile strain and bond shear stress and, additionally, the prestress transfer length. After demonstration the good predictive performance of the proposed analytical approach, parametric studies were carried out to analytically evaluate the influence of the main material properties, and CFRP and groove cross section on the distribution of the CFRP tensile strain and bond shear stress, and on the prestress transfer length. The proposed analytical approach can also predict the evolution of the prestress transfer length during the curing time of the adhesive by considering the variation of its elasticity modulus during this period.

A study on the performance of technology transfer units

Universities are increasingly institutionalizing activities related to technology transfer and one of the main institutional mechanisms that has emerged is the “technology transfer unit” (TTU). Many of them are focusing their activities on the management of the university intellectual property. Studies have investigated factors that seem to affect their performance, but few have looked in detail at internal procedures and techniques that are used in their processes related to technology evaluation and licensing. The aim of this paper is to provide a comprehensive overview of some of the several steps that comprises the processes regarding technology evaluation and licensing, providing an analysis of the critical issues that affect each step of the process. A review of the literature was made, complemented with interviews to seven university TTUs, which was used as a check and a complement to the literature review and as way of perceiving from an insider perspective, the problems and issues that this paper wants to emphasize and to state clearly.

Task clustering on ETL systems – A pattern-oriented approach

Usually, data warehousing populating processes are data-oriented workflows composed by dozens of granular tasks that are responsible for the integration of data coming from different data sources. Specific subset of these tasks can be grouped on a collection together with their relationships in order to form higher- level constructs. Increasing task granularity allows for the generalization of processes, simplifying their views and providing methods to carry out expertise to new applications. Well-proven practices can be used to describe general solutions that use basic skeletons configured and instantiated according to a set of specific integration requirements. Patterns can be applied to ETL processes aiming to simplify not only a possible conceptual representation but also to reduce the gap that often exists between two design perspectives. In this paper, we demonstrate the feasibility and effectiveness of an ETL pattern-based approach using task clustering, analyzing a real world ETL scenario through the definitions of two commonly used clusters of tasks: a data lookup cluster and a data conciliation and integration cluster.

Thermal conditions affecting heat transfer in FDM/FFE: a contribution towards the numerical modelling of the process

The performance of parts produced by Free Form Extrusion (FFE), an increasingly popular additive manufacturing technique, depends mainly on their dimensional accuracy, surface quality and mechanical performance. These attributes are strongly influenced by the evolution of the filament temperature and deformation during deposition and solidification. Consequently, the availability of adequate process modelling software would offer a powerful tool to support efficient process set-up and optimisation. This work examines the contribution to the overall heat transfer of various thermal phenomena developing during the manufacturing sequence, including convection and radiation with the environment, conduction with support and between adjacent filaments, radiation between adjacent filaments and convection with entrapped air. The magnitude of the mechanical deformation is also studied. Once this exercise is completed, it is possible to select the material properties, process variables and thermal phenomena that should be taken in for effective numerical modelling of FFE.

Postharvest changes and respiratory pattern of bacuri fruit (Platonia insignis Mart.) at different maturity stages during ambient storage

Bacuri (Platonia insignis, Mart.) is one of the most important among Amazonian fruits. However, little is known about its postharvest physiology, such as maturity stages, changes during ambient storage, and respiratory pattern. Fruits were harvested at three maturity stages based on epicarp colour: dark green, light green, and turning (50% yellow), in order to determine colour modification and respiratory pattern during ambient storage (25.2 ºC, 75.1 % RH). Fruit of all maturity stages showed, after three days of harvest, a non-climacteric respiratory pattern, with turning fruit presenting the highest CO2 production rate until the fourth storage day (177.63 mg.CO2.kg-1.h-1). Yellowing increased throughout storage as related to lightness, chromaticity, and hue angle reductions. Turning fruit can be stored at ambient conditions for up to 10 days without any loss in marketability.

Geographic pattern of genetic diversity in natural populations of Rosewood (Aniba rosaeodora), in the Central Amazonia

Rosewood (Aniba rosaeodora Ducke, Lauraceae) is an Amazonian evergreen tree and a source of the purest linalool, the main component of its essential oil, which is very valuable in the international perfumery market. After decades of over-exploitation it is currently considered as threatened. We evaluated the genetic diversity and its distribution in four populations in Central Amazonia. Thirty-five reliable RAPD markers were generated, of which 32 were polymorphic (91.4%). Variation was higher within the populations (76.5%; p < 0.0001) and geographic distribution contributed to population differentiation (23.4%; p < 0.0001). The Amazon River had a small influence on gene flow (3.3%; p < 0.0001), but we identified evidence of gene flow across the river. There were significant differences in marker frequencies (p < 0.05), in agreement with the low gene flow (Nm = 2.02). The correlation between genetic distance and gene flow was - 0.95 (p = 0.06) and between geographic distance and gene flow was -0.78 (p = 0.12). There was a geographic cline of variability across an East-West axis, influenced as well by the Amazon River, suggesting the river could be a barrier to gene flow. Although threatened, these Rosewood populations retain high diversity, with the highest levels in the Manaus population, which has been protected for over 42 years in a Reserve.

Performance assessment of electrically small antennas for implantable microsystems with wireless power and communications

Dissertação de mestrado integrado em Engenharia Biomédica (área de especialização em Eletrónica Médica)

Synthesis, antiangiogenesis evaluation and molecular docking studies of 1-Aryl-3-[(thieno[3,2-b]pyridin-7-ylthio)phenyl]ureas: Discovery of a new substitution pattern for type II VEGFR-2 Tyr kinase inhibitors

The synthesis and biological evaluation of novel 1-aryl-3-[2-, 3- or 4-(thieno[3,2-b]pyridin-7-ylthio)phenyl]ureas 3, 4 and 5 as VEGFR-2 tyrosine kinase inhibitors, are reported. The 1-aryl-3-[3-(thieno[3,2-b]pyridin-7-ylthio)phenyl]ureas 4a-4h, with the arylurea in the meta position to the thioether, showed the lowest IC50 values in enzymatic assays (10-206 nM), the most potent compounds 4d-4h (IC50 10-28 nM) bearing hydrophobic groups (Me, F, CF3 and Cl) in the terminal phenyl ring. A convincing rationalization was achieved for the highest potent compounds 4 as type II VEGFR-2 inhibitors, based on the simultaneous presence of: (1) the thioether linker and (2) the arylurea moiety in the meta position. For compounds 4, significant inhibition of Human Umbilical Vein Endothelial Cells (HUVECs) proliferation (BrdU assay), migration (wound-healing assay) and tube formation were observed at low concentrations. These compounds have also shown to increase apoptosis using the TUNEL assay. Immunostaining for total and phosphorylated (active) VEGFR-2 was performed by Western blotting. The phosphorylation of the receptor was significantly inhibited at 1.0 and 2.5 microM for the most promising compounds. Altogether, these findings point to an antiangiogenic effect in HUVECs.

Oxygen mass transfer impact on citric acid production by Yarrowia lipolytica from crude glycerol

Production of citric acid from crude glycerol from biodiesel industry, in batch cultures of Yarrowia lipolytica W29 was performed in a lab-scale stirred tank bioreactor in order to assess the effect of oxygen mass transfer rate in this bioprocess. An empirical correlation was proposed to describe oxygen volumetric mass transfer coefficient (kLa) as a function of operating conditions (stirring speed and specific air flow rate) and cellular density. kLa increased according with a power function with specific power input and superficial gas velocity, and slightly decreased with cellular density. The increase of initial kLa from 7 h-1 to 55 h-1 led to 7.8-fold increase of citric acid final concentration. Experiments were also performed at controlled dissolved oxygen (DO) and citric acid concentration increased with DO up to 60% of saturation. Thus, due to the simpler operation setting an optimal kLa than at controlled DO, it can be concluded that kLa is an adequate parameter for the optimization of citric acid production from crude glycerol by Y. lipolytica and to be considered in bioprocess scale-up. Our empirical correlation, considering the operating conditions and cellular density, will be a valid tool for this purpose.

Myocardial perfusion by contrast echocardiography. Establishment of normal pattern of intracoronary injection and safety in humans

OBJECTIVE: To establish the normal pattern and safety of echocardiographic contrast in patients with no significant obstruction of epicardial coronary arteries. METHODS: 67 patients with normal coronary arteries or obstructions < 50% were selected from 277 patients who underwent coronary angiography (CA). Mean age was 56 ± 11years and 36 were males. At the end CA, echocardiographic contrast was selectively injected into each coronary artery. The parasternal short axis of the left ventricle (LV) was divided into six segments: anterior (A), antero-lateral (AL), postero-lateral (PL), posterior (P), infero-septal (IS) and antero-septal (AS). Anterolateral (ALPM) and posteromedial papillary muscles (PMPM) were also considered. The pattern and intensity of the appearance of the myocardial contrast was visually analyzed. RESULTS: The right coronary artery (RCA) was dominant in 60 patients. Contrast appearance was sudden and simultaneous in the 3 muscle layers. All segments could be contrasted after the injection in both coronary arteries. 100% of the AS, A and AL segments, 97% of the PL and 98% of the ALPM were perfused by the left coronary artery (LCA). P and IS segments were perfused by the RCA in 85% and 82%, respectively, and by a dominant LCA in 71% of the cases. The PMPM was perfused by a dominant RCA in 77% and by a dominant LCA in 86%. There were no symptoms. CONCLUSION: Intracoronary injection of the sonicated solution is a safe procedure that allows for an excellent opacification of the myocardium and can potentially be used during routine CA.

Hypertension in a female nursing staff-pattern of occurrence, diagnosis, and treatment

OBJECTIVE: To report the pattern of occurrence, diagnosis, and treatment of hypertension in a female nursing staff of an emergency hospital. METHODS: We carried out a cross-sectional study that included interviews and blood pressure measurements of 494 nursing professionals at an emergency hospital in the city of Salvador, in the state of Bahia, Brazil. We considered hypertensive all individual with blood pressure > or = 140/90 mmHg or normal pressure if on regular treatment. RESULTS: We found a prevalence of hypertension of 36.4%. Only 18.3% of the individuals ignored their hypertensive condition, and 64.2% admitted not being having regular treatment. Of those individuals who were having treatment, 69.4% had elevated blood pressure on examination. The major reasons for not being on treatment was the occasional elevation of blood pressure (22.2%) and medical counseling (20.0%). CONCLUSION: The results point to the need to introduce hypertension control measures in this occupational group, because of the magnitude of the disease and the potential impact on diffusion of knowledge and measures to control hypertension.

Fisiología de la Transferencia Pasiva de Inmunidad en Equinos. Physiology of the Transfer of Passive Immunity in Equine.

El reconocimiento temprano de anormalidades en la transferencia pasiva de inmunidad en equinos es importante para un manejo satisfactorio de los potrillos. La placenta de la yegua, epiteliocorial, no permite el pasaje de inmunoglobulinas.(Igs). La ingesta de calostro es vital ya que provee las Igs necesarias para alcanzar una concentración sérica de IgG mayor a 800 mg por ciento. Se considerara falla parcial con niveles de IgG entre 400 y 800 mgpor ciento; y total con niveles menores a 400 mg por ciento. La absorción de las Igs es máxima hasta 8 hs después del nacimiento y disminuye hasta hacerse nula a las 24 hs posparto. Los objetivos son: a) estudiar la cinética de la transferencia pasiva de Igs determinando la concentración de IgG sérica en potrillos en el primer trimestre de vida. b) relacionar la concentración de IgG del suero y calostro de la yegua con la concentración sérica de IgG en el potrillo. c) Relacionar en calostro la concentración de inmunoglobulina G con la densidad específica y la determinación semicuantitativa de inmunoglobulina G. d) Relacionar en el suero del potrillo a las 18 - 24 hs posparto la concentración de inmunoglobulina G con la densidad específica y la determinación semicuantitativa de inmunoglobulina G. Material y método: Diseño de estudio: de cohorte, observacional, descriptivo. Animales: 70 yeguas y 70 potrillos de raza Puro Polo. Calostros: 70 muestras Toma de muestras: Yeguas: se tomará una muestra de sangre en el periparto y una muestra de calostro posparto, antes del calostrado del potrillo. Potrillos: se tomarán muestras de sangre seriadas: al nacimiento (precalostrado), 6 hs posparto, 12 hs, 18 hs y 24 hs posparto y a los 21, 60 y 90 días posparto. Determinación de IgG (Suero y calostro): a) Técnica de inmunodifusión radial simple, los resultados se expresará en mg por ciento, en muestras seriadas en intervalos de tiempo preestablecidos. b)Refractometría (con refractómetro Modelo RHC-200/ATC- Arcano). c) Test de gluteralehído, Inmuno -G test. Análisis estadístico: Comparaciones de medias con prueba t apareada o de diferencia de medias, Se considera p significativa < 0,05. Se realizará un análisis de componentes principales. Se correlacionará la concentración de Ig G de suero y calostro de la yegua con la concentración en suero de potrillo. Con los resultados de este trabajo se determinarán los valores de inmunoglobulina en las yeguas y potrillos y su comportamiento en el tiempo, y se validará la sensibilidad y especificidad de las técnicas diagnósticas utilizadas. Los resultados permitirán obtener conocimientos para un manejo racional, desde la perspectiva inmunológica, de los potrillos, al establecer mediante técnicas cuantitativas y semicuantitativas los niveles de Igs séricos alcanzados, favoreciendo un diagnóstico precoz de inmunodeficiencia por fracaso de la transferencia de anticuerpos que pondría en riesgo la vida del potrillo.

Transfer of radionuclides from soil to vegetation in selected Irish ecosystems

This thesis details the findings of a study relating the transfer of 238U, 228Ra (232Th), 226Ra, and 137Cs from soil to vegetation in an Atlantic blanket bog, upland blanket bog and semi-natural grassland situated along the north-west coast of Ireland. The results of this study provide information on the uptake of these radionuclides by the indigenous vegetation found present in these ecosystems. The ecosystems chosen are internationally recognizable ecosystems and provide a wide variety of vegetation species and contrasting soil physiochemical properties which allow the influence of these parameters on radionuclide uptake to be assessed. The levels of radionuclides in the soil and vegetation were measured using gamma spectrometry, alpha spectrometry and ICP-MS. The nutrient status of the vegetation and soil physiochemical properties were measured using atomic absorption, flame photometry and other analytical techniques. The results of the study indicate that the uptake of 238U and 228Ra (232Th) by vegetation from all three ecosystems was negligible as the levels in all vegetation was below the limits of detection for the methods used in this study. These results appear to indicate that the vegetation studied do not possess the ability to accumulate significant levels of these radionuclides however this assumption cannot be upheld in the case of the Atlantic blanket bog as the levels in the soil of this ecosystem were too low for detection. Similar results were obtained for 226Ra uptake in both the Atlantic blanket bog and grassland for all vegetation with the exception of H. lanatus from the grassland ecosystem. Radium-226 uptake in upland blanket bog was higher and was detectable in the majority of vegetation indigenous to this ecosystem. Transfer factor values ranged from 0.07 to 2.35 and the TF values for E. tetralix were significantly higher than all other vegetation studied. This species of heather demonstrated the ability to accumulate 226Ra to a greater extent than all other vegetation. The uptake of 226Ra by upland blanket bog vegetation appears to be significantly influenced by a range of soil physiochemical properties. The nutrient status of the vegetation, in particular the calcium content in the vegetation appears to have a negative impact on the uptake of this radionuclide. Potassium-40 was detectable in all vegetation present in the three ecosystems and the levels in the grassland soil were significantly higher than the levels in both bogland soils. Transfer factor values for Atlantic blanket bog vegetation ranged from 0.9 to 13 .8 and were significantly higher in E. vaginatum in comparison to C. vulgaris. Potassium-40 TF values for upland blanket bog vegetation on average ranged from 1.4 for C. vulgaris (stems) to 5.2 for E. vaginatum and were statistically similar for all species of vegetation. Transfer factor values for grassland vegetation ranged from 0.7 to 3.8 and were also statistically similar for all species of vegetation indicating that the transfer of 40K to vegetation within the upland bog and grassland ecosystem is not dependent on plant species. Comparisons of 40K TF values for all three ecosystems indicate that the uptake in E. vaginatum from the Atlantic blanket bog was statistically higher than all other vegetation studied. This appears to indicate that E. vaginatum has the ability to accumulate 40K, however, this species of vegetation was also present in the upland blanket and did not demonstrate the same behaviour. The uptake of 40K by vegetation from all three ecosystems was significantly affected by a range of soil physiochemical properties and in some cases the results were contradictory in nature possibly indicating that the affect of these parameters on 40K uptake is species dependent. The most obvious trend in the data was the influence of soil CEC and magnesium levels in vegetation on 40K TF values. A positive correlation was apparent between the CEC of the soil and 40K uptake in vegetation from both the Atlantic blanket bog and grassland ecosystem. A similar trend was apparent between magnesium levels in vegetation and 40K TF values for the upland blanket bog and grassland vegetation. Caesium-13 7 levels were found to be significantly higher in the two bogland soils in comparison to the grassland soil and levels of 137Cs decreased with increasing soil depth. Transfer factor values for Atlantic blanket bog vegetation ranged from 1.9 to 9.6 and TF values were significantly higher in the leaves o f C. vulgaris in comparison to all other vegetation from this ecosystem. Caesium-13 7 TF values for the upland blanket bog vegetation on average ranged from 0.29 for E. tetralix to 1.6 for C. vulgaris. Uptake by the leaves of C. vulgaris was significantly higher than all other vegetation present thereby supporting the trend found within the Atlantic blanket bog vegetation. These results appear to indicate that the leaves of C. vulgaris have the ability to accumulate significant quantities of 137Cs and also that the uptake of 137Cs by this vegetation is dependent on plant compartment as the stems of this vegetation contained significantly lower levels than the leaves in both ecosystems. The uptake of 137Cs by grassland vegetation was very low and was only detectable in a fraction of the vegetation sampled. Caesium-137 TF values for grassland vegetation were in general lower than 0.02. The impact of soil physiochemical properties and nutrient status of vegetation on 137Cs uptake by vegetation appears to be complex and in some cases contradictory. The most apparent trend in the data was the positive influence of vegetation nutrients on 137Cs uptake in particular the magnesium levels present in the vegetation and to a lesser extent the calcium levels present. The results in general indicate that the uptake of 226Ra, 40K and 137Cs by the chosen vegetation is varied and complex and is significantly dependent on the species of vegetation, soil radionuclide concentration, soil physiochemical properties and the nutrient status of the vegetation.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.