Disposição de resíduos gerados em estações de tratamento de água em estações de tratamento de esgoto

O presente trabalho foi realizado em duas fases. Na primeira, foram estimados os efeitos produzidos nos decantadores primários de uma ETE, após receber resíduo da ETA-SC, que utiliza sulfato de alumínio como coagulante. Foram realizados ensaios em colunas de sedimentação, onde os parâmetros SST, SSV, cor, turbidez, DQO, coliformes totais, Escherichia coli e parasitas, pesquisados no sobrenadante, diminuíram com o aumento da quantidade de resíduo adicionado. Com relação aos sedimentos obtidos nas colunas de sedimentação, foi encontrada maior quantidade de ST e menor resistência específica nos lodos provenientes das colunas que receberam os resíduos da ETA-SC. No teste de atividade metanogênica, a concentração molar de metano foi reduzida nos sistemas que receberam resíduo da ETA-SC, influenciando negativamente no desenvolvimento dos microrganismos metanogênicas. As espécies de microrganismos do gênero Methanothrix sp foram inibidas, sendo encontradas em maior número no frasco-reator controle e em menor quantidade a medida que se aumentou a quantidade do resíduo adicionado. Nesta etapa foi constatado que o resíduo da ETA-SC poderá apresentar interferências negativas sobre a digestão anaeróbia do lodo produzido em decantadores primários de uma ETE. Na segunda fase, na estação piloto, composta de lagoa de aeração seguida de lagoa de sedimentação, que recebeu resíduo da ETA-Fonte, que utiliza cloreto férrico como coagulante, foi verificado que tal resíduo melhorou a qualidade do efluente em termos de DQO, DBO, SST, turbidez, cor, amônio, nitrato, NTK e fosfato total. Os parâmetros ST, SDT, cloreto, nitrito, condutividade e pH não apresentaram diferenças significativas. Em relação ao exame microscópico não houve influências negativas no licor misto das lagoas de aeração. O lodo formado nas lagoas de sedimentação piloto apresentou-se em maior quantidade na lagoa que recebeu resíduo da ETA-Fonte. Neste lodo a resistência específica a filtração foi menor em comparação ao lodo da lagoa que não recebeu resíduo da ETA-Fonte. A desidratação deste lodo por centrifugação necessitou menor quantidade de polieletrólito. Baseado neste estudo não foi verificado interferências que possa impedir o lançamento do resíduo da ETA-Fonte na ETE-Araraquara.

Avaliação da remoção de matéria orgânica e nutrientes por sorção em solos residuais

A recarga artificial de aquíferos (RAQ) com águas residuais tratadas (ART) é uma prática que pode contribuir para a reposição de volumes de água no solo, que pode ser muito vantajoso em áreas com déficit hídrico ou com sobre-exploração de águas subterrâneas. No entanto, as cargas residuais das ART (p.e. matéria orgânica, nutrientes, metais pesados e microrganismos patogênicos) podem constituir uma desvantagem para a qualidade da água subterrânea, se o solo apresentar condições desfavoráveis para a sua infiltração. Realizaram-se ensaios laboratoriais em batelada para avaliar a remoção de matéria orgânica e nutrientes (formas de nitrogênio e fósforo) na componente fina de um solo residual granítico, proveniente de uma zona previamente selecionada para a infiltração de ART, localizada no nordeste da região da Beira Interior (Quinta de Gonçalo Martins, Guarda, Portugal). Os resultados dos ensaios de sorção em batelada mostram uma boa remoção de P-PO4, por complexação e precipitação, o que indica que o solo apresenta capacidade reativa para remover a carga residual de fosfato das ART. Após realização dos ensaios em batelada, as propriedades do solo mantiveram-se praticamente inalteradas.

Tratamento de lesões white spot pelo sistema fosfato de cálcio caseína-fosfopeptideo amorfo (CPP-ACP): prevenção secundária

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Remoção de carbonatos para otimizar a biolixiviação de rejeito calcopirítico empregando consórcio de microrganismos

The bioleaching of chalcopyrite has not been applied on a commercial scale due to the low process efficiency, so this process has been extensively studied in recent years. The bioleaching of chalcopyrite tailings becomes even more difficult by the presence of higher amounts of impurities, among them are the carbonates. The presence of carbonates in the ore promotes the increase in pH of the solution and may inhibit the development of bioleaching. Therefore, this research aims to apply the acid treatment for optimization of bioleaching process, in order to recover the lost copper throughout the process besides reducing the content of this toxic metal in the tailings pond. The removal and recovery of toxic metals is very important in protecting the environment and human health. The bioleaching experiments were performed in two stages, the first made up using the pre-treated tailing with sulfuric acid in bioleaching, and the second was made using the tailing without treatment with sulfuric acid addition at the beginning of bioleaching. The acid treatment was carried out in bioreactors with three different volumes of H2SO4 96% and a control experiment. All bioleaching experiments were performed in triplicate over a control, without addition of inoculum. The results showed that acid treatment was effective in removal of carbonates and managed to promote a good performance in the bioleaching of chalcopyrite in both steps studied, it is demonstrated that circa 47% copper recovery can be achieved.

Remoção de carbonatos para otimizar a biolixiviação de rejeito calcopirítico empregando consórcio de microrganismos

The bioleaching of chalcopyrite has not been applied on a commercial scale due to the low process efficiency, so this process has been extensively studied in recent years. The bioleaching of chalcopyrite tailings becomes even more difficult by the presence of higher amounts of impurities, among them are the carbonates. The presence of carbonates in the ore promotes the increase in pH of the solution and may inhibit the development of bioleaching. Therefore, this research aims to apply the acid treatment for optimization of bioleaching process, in order to recover the lost copper throughout the process besides reducing the content of this toxic metal in the tailings pond. The removal and recovery of toxic metals is very important in protecting the environment and human health. The bioleaching experiments were performed in two stages, the first made up using the pre-treated tailing with sulfuric acid in bioleaching, and the second was made using the tailing without treatment with sulfuric acid addition at the beginning of bioleaching. The acid treatment was carried out in bioreactors with three different volumes of H2SO4 96% and a control experiment. All bioleaching experiments were performed in triplicate over a control, without addition of inoculum. The results showed that acid treatment was effective in removal of carbonates and managed to promote a good performance in the bioleaching of chalcopyrite in both steps studied, it is demonstrated that circa 47% copper recovery can be achieved.

Frequência de microrganismos em conteúdo vulvovaginal de vacas tratadas com dispositivos intravaginais de progesterona

The dissertation was divided in two studies. With the first, aimed to evaluate the occurrence of microorganisms present in the vulvovaginal region of cows that received intravaginal progesterone devices during the fixed-time artificial insemination (FTAI) programs, and correlate the results with pregnancy rates. Samples were collected from vulvovaginal region of 30 beef cows Guzerá and 30 crossbred dairy cows, and also intravaginal devices, randomly. Of the 120 samples of cows, 60 corresponded to the collections of the period prior to the introduction device (D0) and 60 to the subsequent withdrawal of it (D9); it yielded 100% of bacterial growth, whereas, in most samples, it was found more than one isolated. In D0, the most frequent agent was Escherichia coli (52%), and in D9, Proteus spp and E. coli were the most frequent (32% and 28%, respectively). Regarding intravaginal progesterone devices, in D0 were isolated 37 microorganisms, being predominant those of the genus Bacillus (35%); in D9, 41 colony forming units (CFU) were isolated, of which 36.6% corresponded to Proteus spp. For the analysis of the antimicrobial profile, susceptibility testing was performed by diffusion agar disk, and cows that did not became pregnant after FTAI program were selected, as a future treatment. There resistance 100% to penicillin, and sensitivity, approximately, 90% to gentamicin, both isolates obtained from samples of beef cows and obtained of dairy cows. Regarding pregnancy rate, the 30 beef cows, 11 were diagnosed pregnant (36.7%), 4 (36.4%) treated with reused devices and 7 (63.6%) with new devices, which showed more effective. Of the 30 dairy cows, 15 were pregnant (50%), 8 (53.3%) were implanted with reused devices and 7 (46.7%) with new devices, with no significant differences in pregnancy rates. Because it is a research, females were chosen at random, and factors such as body condition, nutritional management and health weren't priority. With the second study, aimed to analyze the similarity between strains, conducted by technical Random Amplified Polymorphic DNA (RAPD -PCR). Presence of E. coli and the absence of pregnancy were selection criteria used. From the results, it was observed that most of the isolates wasn't phylogenetically similar, since they showed lower than 85% similarity. The study stressed the importance of E. coli in vulvovaginal microbiota of cows and the presence of phenotypic and genotypic characters of this bacterium on possible reproductive problems.

Influência das etapas do processo de abate de suínos na prevalência de patógenos e níveis de microrganismos indicadores de qualidade e higiene

The pig slaughter process involve different steps that can influence the microbiological quality of carcasses. At this, the understanding of the slaughter process on the microbiological aspects is necessary for the implementation and evaluation of critical control points. The microbiological control of the slaughter process should involve the evaluation of pathogens prevalence and levels of quality and hygiene indicator microorganisms. This study aimed at investigating the influence of steps slaughter process on the microbiological levels of pig carcasses, and evaluate if there is correlation between pathogens (Salmonella spp. and Listeria monocytogenes) and indicators (aerobic mesophilic counts, total coliforms, Escherichia coli and Enterobacteriaceae) microorganisms. A high Salmonella soroprevalence in pigs were founded before the slaughter (57.49 %). While the Salmonella prevalence in carcasses at the initial stage of the slaughter was 26.67 % and in the final stage 1.11 %, L. monocytogenes was detected only in the final washing and cooling steps, with a prevalence of 21.11 and 8.89 %, respectively. The aerobic mesophilic counts, Enterobacteriaceae, total coliforms and E. coli levels in initial steps of slaughter process were 4.25 ± 0.37; 1.25 ± 0.38; 1.10 ± 0.35 and 0.86 ± 0.36, respectively. At the end of slaughter process the results were lower (ranging from 0.16 at 2.70 log CFU/cm2). The step that most reduced microbiological levels was the scalding. The dehairing was a critical step that led to a significant increase of microorganisms levels in the process (p < 0.05). The evisceration not proved to be a critical step on the increase of microbial levels, differently of the final washing, which showed significant increases (p < 0.05) over the levels of aerobic counts, total coliforms, E. coli and enterobacterias (0.30; 0.36; 0.27 and 0.42 log respectively) and Salmonella spp. and L. monocytogenes. The chilling contributes significantly to the reduction of microbiological levels of carcasses, bringing them to levels below the all process stages, with the exception of scalding. No correlation between the hygiene indicator microorganisms used and presence of Salmonella spp. and L. monocytogenes were obtained (p < 0.05). The results show that steps in the process are critical to the sanitary profile, which implies the need to implement actions in the process to reducing the microbiological levels.

Aplicação de porfirinas como fotossensibilizadores para a inativação fotodinâmica de microrganismos da cavidade oral

A cavidade oral é um habitat favorável ao desenvolvimento de microrganismos, alguns dos quais podem causar doenças, sendo Enterococcus faecalis uma bactéria frequentemente encontrada em biofilmes instalados em diferentes nichos da cavidade oral. Este trabalho teve como objetivo testar a aplicabilidade da inativação fotodinâmica (PDI), usando porfirinas como fotossensibilizadores, como estratégia de controlo de biofilmes da cavidade oral, tomando E. faecalis como microrganismo modelo. Como fotossensibilizadores, foram testadas as porfirinas catiónicas Tetra-Py+-Me, Tri-Py+-Me-PF, PCat 2, PCat 3, PCat 4 e o corante azul de toluidina O (TBO), incluído como fotossensibilizador de referência. Os biofilmes de E. faecalis foram irradiados com luz branca (270 J.cm-2) a uma intensidade de 150 mW.cm-2, na presença de até 50 µM de porfirina ou até 20 µM de TBO. A cinética de inativação foi caracterizada pela variação da concentração de células viáveis ao longo da experiência. Foi também testada a inativação de células na forma livre, em condições equivalentes. Os biofilmes de E. faecalis mostraram-se muito resistentes à PDI com qualquer dos PS testados, não tendo sido conseguidos fatores de inativação superiores a 2 log com a concentração máxima de PS (50 µM) e a dose máxima de luz (270 J.cm-2). Na forma livre as células foram inativadas até ao limite de quantificação com concentrações de PS de 0,5 µM e doses de luz até 108 J.cm-2, com uma intensidade de 10 mW.cm-2. No entanto, a eficiência de ligação dos PS às células livres não foi maior do que aos biofilmes. Embora os fatores de inativação obtidos não permitam ainda considerar que a PDI com os compostos testados seja uma abordagem antimicrobiana eficiente contra biofilmes de E. faecalis, o facto de se confirmar uma relação entre as propriedades químicas e físicas do PS e a sua eficiência, bem como os resultados muito promissores obtidos com uma das famílias de porfirinas testadas apenas em células livres, justifica a prossecução do desenvolvimento de novos PS para o controle de biofilmes bacterianos na cavidade oral.

Interação de microorganismos na solubilização de fósforo e potássio de rochas para produção de biofertilizantes

he present model of agriculture is based on intensive use of industrial inputs, due to its rapid response, but it brings harmful consequences to the environment, and it is necessary the use of modern inputs. And an alternative is the use of rock biofertilizers in agriculture, a product easy to use, with higher residual effect and does not harm the environment. The objective of study was to evaluate the inoculation and co-inoculation of different microorganisms in the solubilization of rock phosphate and potash ground microbial evaluating the best performance in the production of biofertilizers comparing with rocks pure in soil chemical properties and, verify effect of inoculation of the bacterium Paenibacillus polymyxa in the absorption of minerals dissolved in the development of cowpea (Vigna unguiculata [L.] Walp.). The first bioassay was conducted in Laboratory (UFRN) for 72 days in Petri dishes, where the rock powder was increased by 10% and sulfur co-inoculated and inoculated with bacterial suspension of Paenibacillus polymyxa grown in medium tryptone soy broth, Ralstonia solanacearum in medium Kelman, Cromobacterium violaceum in medium Luria-Bertani and Acidithiobacillus thiooxidans in medium Tuovinen and Kelly,and fungi Trichoderma humatum and Penicillium fellutanum in malt extract. Every 12 days, samples were removed in order to build up the release curve of minerals. The second bioassay was conducted in a greenhouse of the Agricultural Research Corporation of Rio Grande do Norte in experimental delineation in randomized block designs, was used 10 kg of an Yellow Argissolo Dystrophic per pot with the addition of treatments super phosphate simple (SS), potassium chloride (KCl), pure rock, biofertilizers in doses 40, 70, 100 and 200% of the recommendation for SS and KCl, and a control, or not inoculated with bacteria P. polymyxa. Were used seeds of cowpea BRS Potiguar and co-inoculated with the bacterial suspension of Bradyrhizobium japonicum and P. polymyxa. The first crop was harvested 45 days after planting, were evaluated in the dry matter (ADM), macronutrients (N, P, K, Ca, Mg) and micronutrients (Zn, Fe, Mn) in ADM. And the second at 75 days assessing levels of macro end micronutrients in plants and soil, and the maximum adsorption capacity of P in soil. The results showed synergism in co-inoculations with P. polymyxa+R. solanacearum and, P. polymyxa+C. violaceum solubilizations providing higher P and K, respectively, and better solubilization time at 36 days. The pH was lower in biofertilizers higher doses, but there was better with their addition to P at the highest dose. Significant reduction of maximum adsorption capacity of phosphorus with increasing dose of biofertilizer. For K and Ca was better with SS+KCl, and Mg to pure rock. There was an effect of fertilization on the absorption, with better results for P, K and ADM with SS+KCL, and N, Ca and Mg for biofertilizers. Generally, the P. polymyxa not influence the absorption of the elements in the plant. In treatments with the uninoculated P. polymyxa chemical fertilizer had an average significantly higher for weight and number of grains. And in the presence of the bacteria, biofertilizers and chemical fertilizers had positive values in relation to rock and control. The data show that the rocks and biofertilizers could meet the need of nutrients the plants revealed as potential for sustainable agriculture