Relationship between work rate and oxygen uptake in mitochondrial myopathy during ramp-incremental exercise

We determined the response characteristics and functional correlates of the dynamic relationship between the rate (Δ) of oxygen consumption ( O2) and the applied power output (work rate = WR) during ramp-incremental exercise in patients with mitochondrial myopathy (MM). Fourteen patients (7 males, age 35.4 ± 10.8 years) with biopsy-proven MM and 10 sedentary controls (6 males, age 29.0 ± 7.8 years) took a ramp-incremental cycle ergometer test for the determination of the O2 on-exercise mean response time (MRT) and the gas exchange threshold (GET). The ΔO2/ΔWR slope was calculated up to GET (S1), above GET (S2) and over the entire linear portion of the response (S T). Knee muscle endurance was measured by isokinetic dynamometry. As expected, peak O2 and muscle performance were lower in patients than controls (P < 0.05). Patients had significantly lower ΔO2/ΔWR than controls, especially the S2 component (6.8 ± 1.5 vs 10.3 ± 0.6 mL·min-1·W-1, respectively; P < 0.001). There were significant relationships between ΔO2/ΔWR (S T) and muscle endurance, MRT-O2, GET and peak O2 in MM patients (P < 0.05). In fact, all patients with ΔO2/ΔWR below 8 mL·min-1·W-1 had severely reduced peak O2 values (<60% predicted). Moreover, patients with higher cardiopulmonary stresses during exercise (e.g., higher Δ ventilation/carbon dioxide output and Δ heart rate/ΔO2) had lower ΔO2/ΔWR (P < 0.05). In conclusion, a readily available, effort-independent index of aerobic dysfunction during dynamic exercise (ΔO2/ΔWR) is typically reduced in patients with MM, being related to increased functional impairment and higher cardiopulmonary stress.

Sleep pattern and learning in knockdown mice with reduced cholinergic neurotransmission

Impaired cholinergic neurotransmission can affect memory formation and influence sleep-wake cycles (SWC). In the present study, we describe the SWC in mice with a deficient vesicular acetylcholine transporter (VAChT) system, previously characterized as presenting reduced acetylcholine release and cognitive and behavioral dysfunctions. Continuous, chronic ECoG and EMG recordings were used to evaluate the SWC pattern during light and dark phases in VAChT knockdown heterozygous (VAChT-KDHET, n=7) and wild-type (WT, n=7) mice. SWC were evaluated for sleep efficiency, total amount and mean duration of slow-wave, intermediate and paradoxical sleep, as well as the number of awakenings from sleep. After recording SWC, contextual fear-conditioning tests were used as an acetylcholine-dependent learning paradigm. The results showed that sleep efficiency in VAChT-KDHET animals was similar to that of WT mice, but that the SWC was more fragmented. Fragmentation was characterized by an increase in the number of awakenings, mainly during intermediate sleep. VAChT-KDHET animals performed poorly in the contextual fear-conditioning paradigm (mean freezing time: 34.4±3.1 and 44.5±3.3 s for WT and VAChT-KDHET animals, respectively), which was followed by a 45% reduction in the number of paradoxical sleep episodes after the training session. Taken together, the results show that reduced cholinergic transmission led to sleep fragmentation and learning impairment. We discuss the results on the basis of cholinergic plasticity and its relevance to sleep homeostasis. We suggest that VAChT-KDHET mice could be a useful model to test cholinergic drugs used to treat sleep dysfunction in neurodegenerative disorders.

Novel retrograde puncture method to establish preperitoneal space for laparoscopic direct inguinal hernia repair with internal ring suturing

The aim of this study was to explore the clinical efficacy of a novel retrograde puncture approach to establish a preperitoneal space for laparoscopic direct inguinal hernia repair with inguinal ring suturing. Forty-two patients who underwent laparoscopic inguinal hernia repair with retrograde puncture for preperitoneal space establishment as well as inguinal ring suturing between August 2013 and March 2014 at our hospital were enrolled. Preperitoneal space was successfully established in all patients, with a mean establishment time of 6 min. Laparoscopic repairs were successful in all patients, with a mean surgical time of 26±15.1 min. Mean postoperative hospitalization duration was 3.0±0.7 days. Two patients suffered from postoperative local hematomas, which were relieved after puncturing and drainage. Four patients had short-term local pain. There were no cases of chronic pain. Patients were followed up for 6 months to 1 year, and no recurrence was observed. Our results demonstrate that preperitoneal space established by the retrograde puncture technique can be successfully used in adult laparoscopic hernioplasty to avoid intraoperative mesh fixation, and thus reduce medical costs.

Virtuaalinen käyttöönottoympäristö automaatiojärjestelmälle

Valmistavan teollisuuden kiristyvät vaatimukset suunnittelusta markkinoille -ajassa (engl. time-to-market), laadussa, kustannustehokkuudessa ja turvallisuudessa luovat paineita uusien toimintatapojen etsimisessä. Usein laitteiston ohjausalgoritmeja ei ole mahdollista testata todellisen laitteiston kanssa, vaan ainoaksi ennakoivaksi vaihtoehdoksi jää todellisen laitteiston virtuaalinen mallintaminen. Eräs uusista toimintavoista on virtuaalinen käyttöönotto, jossa tuotantolinja tai laitteisto mallinnetaan ja sen käyttäytymistä simuloidaan ohjausalgoritmien parantamista ja todentamista varten. Tämän diplomityön tavoitteena oli toteuttaa virtuaalinen käyttöönottoympäristö, jolla laitteiston 3D-mallinnettua virtuaalista mallia voidaan ohjata reaaliajassa todellisen laitteiston ohjauslaitteistolla. Käyttöönottoympäristön toteuttamisen lopullisena tavoitteena on tutkia, millaisia hyötyjä sillä voidaan saavuttaa Outotec (Finland) Oy:n automaatiojärjestelmien suunnittelussa ja käyttöönotossa kiristyvien vaatimusten täyttämiseksi. Työssä toteutetulla käyttöönottoympäristöllä pystytään simuloimaan 3D-mallinnetun laitteiston osan toimintaa reaaliajassa. Todellisen laitteiston ominaisuuksista määritettyjä vaatimuksia ei kustannussyistä täytetty, sillä ennen sitä haluttiin varmistua valitun alustan ominaisuuksista, toimivuudesta ja soveltuvuudesta. Toteutuksen katsotaan kuitenkin täyttävän pehmeän reaaliaikaisuuden kriteerin noin 40 ms aikatasolla ja 80 ms reaktioajalla. Toteutettu virtuaalinen käyttöönottoympäristö osoittautui toimivaksi ja soveltuvaksi, sekä sen todettiin tuovan potentiaalisia hyötyjä Outotec (Finland) Oy:lle, esimerkiksi kosketusnäyttöjen visualisoinnin parannus, hybridikäyttöönottomahdollisuus sekä automaatio-ohjauksien kehittäminen. Työn perusteella arvioidaan onko Outotec:lla tarvetta jatkaa valitulla alustalla todellisen laitteiston aikavaatimukset täyttävään reaaliaika-toteutukseen, jota työssä esitellään.

Sulphuric acid scarification effects on Brachiaria brizantha, B. humidicola and Panicum maximum seed dormancy release

Most tropical forage grass species have dormant seeds, which reduce percentages in germination tests. The objective of this study was to evaluate H2SO4 scarification effects on seed dormancy releasing, through germination time (T50) and variability among germination test replicates, in 630, 94 and 82 seed samples of B. brizantha, B. humidicola and P. maximum, respectively, tested at the Central Seed Testing Laboratory, Campinas, Brazil, from 1991 to 1999. Germination tests used two 4 x 100 replicates of intact and scarified seeds (15-, 10-, 5-minute treatments, respectively). Mean germination time (T50) and variability among germination replicates were also analysed. Statistical analysis was performed by t-test paired samples for means. Scarification promoted general decreases in T50, while variability among germination test replicates was reduced in B. brizantha. Scarification increase germination in B. brizantha and P. maximum, but is deleterious in B. humidicola.

Examining peer-controlled KR schedules during the learning of a movement-timing task as a function of task experience.

Learners can be provided with feedback in the form of knowledge of results (KR), under self-controlled and peer-controlled schedules. Recently, McRae, Hansen, and Patterson (2015), identified that inexperienced peers can provide KR that can facilitate motor skill acquisition. However, it is currently unknown whether previous task experience differentially impacts how peers present learners with KR and whether this KR impacts motor skill acquisition. In the present study, participants were randomly assigned to become inexperienced peer facilitators, learners with an inexperienced peer, learners with self-control who later became experienced peers, learners with an experienced peer, or learners in a control group. During acquisition learners completed a serial-timing task with a goal of 2500ms and returned approximately twenty four hours later for a delayed retention, time transfer, and pattern transfer test. We predicted that during the delayed tests, learners with self-control would outperform all other groups. Furthermore, we predicted that learners who received KR from experienced peers would outperform learners who received KR from inexperienced peers. However, our results indicated that participants who received peer-controlled and self-controlled KR schedules learned the task in an equivalent manner. Thus, our results are novel as they identify that inexperienced peers can provide KR that is as effective as KR provided by experienced peers and KR requested under self-controlled conditions.

Pharmacométrie de la ropivacaïne suivant l’anesthésie locorégionale chez les patients orthopédiques : caractérisation de l’intensité et de la durée du bloc sensitif

Introduction & Objectifs : Pour assurer l’analgésie postopératoire, l’anesthésiste dispose, en plus des différentes classes de médicaments administrés par voie orale ou intraveineuse, de diverses techniques pour bloquer l’influx nerveux douloureux en administrant les anesthésiques locaux (AL) de manière centrale ou périphérique. La ropivacaïne (ROP), un AL à longue durée d’action, est un médicament de première intention partout dans le monde, en raison de sa grande efficacité et de son faible risque de toxicité. Contrairement à certains pays, la ROP n'est toujours pas indiquée au Canada pour la rachianesthésie (bloc central) en raison d'un manque de données probantes. Jusqu'à présent, les efforts de recherche ont essentiellement porté sur la sécurité ainsi que sur la durée d’action du médicament lorsqu’administré par voie spinale. De plus, les doses optimales de ROP pour l’anesthésie régionale périphérique ne sont pas encore précisément connues. La posologie devrait être adaptée au site d’administration ainsi qu’à l’intensité et la durée du stimulus produit par la chirurgie. Ultimement, cela permettrait aux cliniciens d’identifier le régime optimal en fonction des facteurs démographiques qui pourraient affecter la pharmacocinétique (PK) et la pharmacodynamie (PD) de l’AL (objectif global de ces travaux). Validation de la Méthode Analytique Manuscrit 1 : Une méthode analytique spécifique et sensible permettant de déterminer les concentrations plasmatiques de ROP a d’abord été optimisée et validée. Validation du Biomarqueur Manuscrit 2 : Nous avons ensuite mis au point et évalué la fiabilité d’une méthode quantitative basée sur la mesure du seuil de perception sensorielle (CPT) chez le volontaire sain. Ce test nécessite l’application d’un courant électrique transcutané qui augmente graduellement et qui, selon la fréquence choisie, est capable de stimuler spécifiquement les fibres nerveuses impliquées dans le cheminement de l’influx nerveux douloureux. Les résultats obtenus chez les volontaires sains indiquent que la mesure CPT est fiable, reproductible et permet de suivre l’évolution temporelle du bloc sensitif. Études cliniques Manuscrit 3 : Nous avons ensuite caractérisé, pendant plus de 72 h, l’absorption systémique de la ROP lorsqu’administrée pour un bloc du nerf fémoral chez 19 patients subissant une chirurgie du genou. Le modèle PK populationnel utilisé pour analyser nos résultats comporte une absorption biphasique durant laquelle une fraction de la dose administrée pénètre rapidement (temps d’absorption moyen : 27 min, IC % 19 – 38 min) dans le flux sanguin systémique pendant que l’autre partie, en provenance du site de dépôt, est redistribuée beaucoup plus lentement (demi-vie (T1/2) : 2.6 h, IC % 1.6 – 4.3 h) vers la circulation systémique. Une relation statistiquement significative entre l’âge de nos patients et la redistribution de l’AL suggère que la perméabilité tissulaire est augmentée avec l’âge. Manuscrit 4 : Une analyse PK-PD du comportement sensitif du bloc fémoral (CPT) a été effectuée. Le modèle développé a estimé à 20.2 ± 10.1 mg la quantité de ROP nécessaire au site d’action pour produire 90 % de l’effet maximal (AE90). À 2 X la AE90, le modèle prédit un début d’action de 23.4 ± 12.5 min et une durée de 22.9 ± 5.3 h. Il s’agit de la première étude ayant caractérisé le comportement sensitif d’un bloc nerveux périphérique. Manuscrit 5 : La troisième et dernière étude clinique a été conduite chez les patients qui devaient subir une chirurgie du genou sous rachianesthésie. Tout comme pour le bloc du nerf fémoral, le modèle PK le plus approprié pour nos données suggère que l’absorption systémique de la ROP à partir du liquide céphalo-rachidien est biphasique; c.à.d. une phase initiale (T1/2 : 49 min, IC %: 24 – 77 min) suivie (délai: 18 ± 2 min) d'une phase légèrement plus lente (T1/2 : 66 min, IC %: 36 – 97 min). L’effet maximal a été observé beaucoup plus rapidement, soit aux environs de 12.6 ± 4.9 min, avant de revenir aux valeurs de base 210 ± 55 min suivant l’administration de l’agent. Ces données ont permis d’estimer une AE50 de 7.3 ± 2.3 mg pour l'administration spinale. Conclusion : En somme, ces modèles peuvent être utilisés pour prédire l’évolution temporelle du bloc sensitif de l’anesthésie rachidienne et périphérique (fémorale), et par conséquent, optimiser l’utilisation clinique de la ROP en fonction des besoins des cliniciens, notamment en ce qui a trait à l’âge du patient.

L’effet du port nocturne des prothèses complètes sur le sommeil et la qualité de vie liée à la santé buccodentaire : une étude pilote expérimentale

Problématique : L’édentement et les troubles du sommeil sont des affections chroniques fréquentes chez les personnes âgées et qui peuvent avoir des conséquences défavorables sur le bien-être de ces personnes, ainsi que sur leur qualité de vie. L’édentement pourrait perturber le sommeil par la modification de la structure crânio-faciale et des tissus mous environnants. Cependant, cette relation n'est pas suffisamment documenté. Objectifs : Le but de cette étude pilote était de préparer la mise en œuvre d’une étude clinique randomisée contrôlée concernant l’effet du port nocturne des prothèses complètes sur la qualité du sommeil. Méthodologie : Treize aînés édentés ont participé à cette étude clinique randomisée contrôlée de type croisé. L’intervention consistait à dormir avec ou sans les prothèses durant la nuit. Les participants à l'étude ont été assignés à porter et ne pas porter leurs prothèses dans des ordres alternatifs pour des périodes de 30 jours. La qualité du sommeil a été évaluée par la polysomnographie portable et le questionnaire Pittburgh Sleep Quality Index (PSQI). Les données supplémentaires incluent la somnolence diurne, évaluée par le questionnaire Epworth Sleepiness Scale (ESS), et la qualité de vie liée à la santé buccodentaire, évaluée par le questionnaire Oral Health Impact Profile 20 (OHIP-20). De plus, à travers les examens cliniques et radiologiques, les données des caractéristiques sociodémographiques, de la morphologie oropharyngée, des caractéristiques buccodentaires et des prothèses ont été recueillies. Les modèles de régression linéaire pour les mesures répétées ont été utilisés pour analyser les résultats. Résultats : L’étude de faisabilité a atteint un taux de recrutement à l’étude de 59,1% et un taux de suivi de 100%. Le port nocturne des prothèses dentaires augmentait l’index d'apnée-hypopnée (IAH) et le score PSQI par rapport au non port nocturne des prothèses : (IAH : Médiane = 20,9 (1,3 - 84,7) versus 11,2 (1,9 - 69,6), p = 0,237; le score PSQI : Médiane = 6,0 (3,0 - 11,0) versus 5,0 (1,0 - 11,0), p = 0,248). Cependant, ces différences n'étaient pas statistiquement significatives, sauf que pour le temps moyen d’apnée (plus long avec des prothèses) (p < 0,005) et le temps de ronflement relatif (moins élevé avec des prothèses) (p < 0,05). La somnolence diurne excessive et la qualité de vie liée à la santé buccodentaire étaient semblables pour les deux interventions (le score ESS : Médiane = 4,0 (3,0-10,0) versus 5,0 (2,0-10,0), p = 0,746; le score OHIP-20: Médiane = 31,0 (20,0-64,0) versus 27,0 (20,0-49,0), p = 0,670). L’impact néfaste du port nocturne des prothèses complètes sur le sommeil a été statistiquement significatif chez les personnes souffrant de l’apnée-hypopnée moyenne à sévère (p < 0,005). Conclusion : L’essai clinique pilote a montré que le port nocturne des prothèses complètes a un impact négatif sur la qualité du sommeil des gens âgés édentés, surtout chez les personnes avec l’apnée obstructive du sommeil modérée à sévère. Les résultats doivent être confirmés par l’étude clinique randomisée contrôlée de phase II.

MQFD: A Model for Synergizing TPM and QFD

This thesis presents the methodology of linking Total Productive Maintenance (TPM) and Quality Function Deployment (QFD). The Synergic power ofTPM and QFD led to the formation of a new maintenance model named Maintenance Quality Function Deployment (MQFD). This model was found so powerful that, it could overcome the drawbacks of TPM, by taking care of customer voices. Those voices of customers are used to develop the house of quality. The outputs of house of quality, which are in the form of technical languages, are submitted to the top management for making strategic decisions. The technical languages, which are concerned with enhancing maintenance quality, are strategically directed by the top management towards their adoption of eight TPM pillars. The TPM characteristics developed through the development of eight pillars are fed into the production system, where their implementation is focused towards increasing the values of the maintenance quality parameters, namely overall equipment efficiency (GEE), mean time between failures (MTBF), mean time to repair (MTIR), performance quality, availability and mean down time (MDT). The outputs from production system are required to be reflected in the form of business values namely improved maintenance quality, increased profit, upgraded core competence, and enhanced goodwill. A unique feature of the MQFD model is that it is not necessary to change or dismantle the existing process ofdeveloping house ofquality and TPM projects, which may already be under practice in the company concerned. Thus, the MQFD model enables the tactical marriage between QFD and TPM.First, the literature was reviewed. The results of this review indicated that no activities had so far been reported on integrating QFD in TPM and vice versa. During the second phase, a survey was conducted in six companies in which TPM had been implemented. The objective of this survey was to locate any traces of QFD implementation in TPM programme being implemented in these companies. This survey results indicated that no effort on integrating QFD in TPM had been made in these companies. After completing these two phases of activities, the MQFD model was designed. The details of this work are presented in this research work. Followed by this, the explorative studies on implementing this MQFD model in real time environments were conducted. In addition to that, an empirical study was carried out to examine the receptivity of MQFD model among the practitioners and multifarious organizational cultures. Finally, a sensitivity analysis was conducted to find the hierarchy of various factors influencing MQFD in a company. Throughout the research work, the theory and practice of MQFD were juxtaposed by presenting and publishing papers among scholarly communities and conducting case studies in real time scenario.

Queueing Models with Vacations and Working Vacations

The objective of the study of \Queueing models with vacations and working vacations" was two fold; to minimize the server idle time and improve the e ciency of the service system. Keeping this in mind we considered queueing models in di erent set up in this thesis. Chapter 1 introduced the concepts and techniques used in the thesis and also provided a summary of the work done. In chapter 2 we considered an M=M=2 queueing model, where one of the two heterogeneous servers takes multiple vacations. We studied the performance of the system with the help of busy period analysis and computation of mean waiting time of a customer in the stationary regime. Conditional stochastic decomposition of queue length was derived. To improve the e ciency of this system we came up with a modi ed model in chapter 3. In this model the vacationing server attends the customers, during vacation at a slower service rate. Chapter 4 analyzed a working vacation queueing model in a more general set up. The introduction of N policy makes this MAP=PH=1 model di erent from all working vacation models available in the literature. A detailed analysis of performance of the model was provided with the help of computation of measures such as mean waiting time of a customer who gets service in normal mode and vacation mode.

Continuous Production of Extracellular L-Glutaminase by Ca-Alginate-Immobilized Marine Beauveria bassiana BTMF S-10 in Packed-Bed Reactor

L-Glutamine amidohydrolase (L-glutaminase, EC 3.5.1.2) is a therapeutically and industrially important enzyme. Because it is a potent antileukemic agent and a flavor-enhancing agent used in the food industry, many researchers have focused their attention on L-glutaminase. In this article, we report the continuous production of extracellular L-glutaminase by the marine fungus Beauveria bassiana BTMF S-10 in a packed-bed reactor. Parameters influencing bead production and performance under batch mode were optimized in the order-support (Na-alginate) concentration, concentration of CaCl2 for bead preparation, curing time of beads, spore inoculum concentration, activation time, initial pH of enzyme production medium, temperature of incubation, and retention time. Parameters optimized under batch mode for L-glutaminase production were incorporated into the continuous production studies. Beads with 12 × 108 spores/g of beads were activated in a solution of 1% glutamine in seawater for 15 h, and the activated beads were packed into a packed-bed reactor. Enzyme production medium (pH 9.0) was pumped through the bed, and the effluent was collected from the top of the column. The effect of flow rate of the medium, substrate concentration, aeration, and bed height on continuous production of L-glutaminase was studied. Production was monitored for 5 h in each case, and the volumetric productivity was calculated. Under the optimized conditions for continuous production, the reactor gave a volumetric productivity of 4.048 U/(mL·h), which indicates that continuous production of the enzyme by Ca-alginate-immobilizedspores is well suited for B. bassiana and results in a higher yield of enzyme within a shorter time. The results indicate the scope of utilizing immobilized B. bassiana for continuous commercial production of L-glutaminase

A Study of Single Stage Semi‐Dry Anaerobic Digestion of Organic Fraction of Municipal Solid Waste

Solid waste generation is a natural consequence of human activity and is increasing along with population growth, urbanization and industrialization. Improper disposal of the huge amount of solid waste seriously affects the environment and contributes to climate change by the release of greenhouse gases. Practicing anaerobic digestion (AD) for the organic fraction of municipal solid waste (OFMSW) can reduce emissions to environment and thereby alleviate the environmental problems together with production of biogas, an energy source, and digestate, a soil amendment. The amenability of substrate for biogasification varies from substrate to substrate and different environmental and operating conditions such as pH, temperature, type and quality of substrate, mixing, retention time etc. Therefore, the purpose of this research work is to develop feasible semi-dry anaerobic digestion process for the treatment of OFMSW from Kerala, India for potential energy recovery and sustainable waste management. This study was carried out in three phases in order to reach the research purpose. In the first phase, batch study of anaerobic digestion of OFMSW was carried out for 100 days at 32°C (mesophilic digestion) for varying substrate concentrations. The aim of this study was to obtain the optimal conditions for biogas production using response surface methodology (RSM). The parameters studied were initial pH, substrate concentration and total organic carbon (TOC). The experimental results showed that the linear model terms of initial pH and substrate concentration and the quadratic model terms of the substrate concentration and TOC had significant individual effect (p < 0.05) on biogas yield. However, there was no interactive effect between these variables (p > 0.05). The optimum conditions for maximizing the biogas yield were a substrate concentration of 99 g/l, an initial pH of 6.5 and TOC of 20.32 g/l. AD of OFMSW with optimized substrate concentration of 99 g/l [Total Solid (TS)-10.5%] is a semi-dry digestion system .Under the optimized condition, the maximum biogas yield was 53.4 L/kg VS (volatile solid).. In the second phase, semi-dry anaerobic digestion of organic solid wastes was conducted for 45 days in a lab-scale batch experiment for substrate concentration of 100 g/l (TS-11.2%) for investigating the start-up performances under thermophilic condition (50°C). The performance of the reactor was evaluated by measuring the daily biogas production and calculating the degradation of total solids and the total volatile solids. The biogas yield at the end of the digestion was 52.9 L/kg VS for the substrate concentration of 100 g/l. About 66.7% of volatile solid degradation was obtained during the digestion. A first order model based on the availability of substrate as the limiting factor was used to perform the kinetic studies of batch anaerobic digestion system. The value of reaction rate constant, k, obtained was 0.0249 day-1. A laboratory bench scale reactor with a capacity of 36.8 litres was designed and fabricated to carry out the continuous anaerobic digestion of OFMSW in the third phase. The purpose of this study was to evaluate the performance of the digester at total solid concentration of 12% (semi-dry) under mesophlic condition (32°C). The digester was operated with different organic loading rates (OLRs) and constant retention time. The performance of the reactor was evaluated using parameters such as pH, volatile fatty acid (VFA), alkalinity, chemical oxygen demand (COD), TOC and ammonia-N as well as biogas yield. During the reactor’s start-up period, the process is stable and there is no inhibition occurred and the average biogas production was 14.7 L/day. The reactor was fed in continuous mode with different OLRs (3.1,4.2 and 5.65 kg VS/m3/d) at constant retention time of 30 days. The highest volatile solid degradation of 65.9%, with specific biogas production of 368 L/kg VS fed was achieved with OLR of 3.1 kg VS/m3/d. Modelling and simulation of anaerobic digestion of OFMSW in continuous operation is done using adapted Anaerobic Digestion Model No 1 (ADM1).The proposed model, which has 34 dynamic state variables, considers both biochemical and physicochemical processes and contains several inhibition factors including three gas components. The number of processes considered is 28. The model is implemented in Matlab® version 7.11.0.584(R2010b). The model based on adapted ADM1 was tested to simulate the behaviour of a bioreactor for the mesophilic anaerobic digestion of OFMSW at OLR of 3.1 kg VS/m3/d. ADM1 showed acceptable simulating results.

Biological Photonic Crystals: Diatoms

The aim of this work was to produce a variety of fluorescent diatom cell wall material as a basis for spectroscopic investigations of the influence of the photonic structure on the emission of an incorporated laser dye. This goal was achieved by the method of in vivo-fluorochromation, in which the fluorescence dyes are incorporated by the diatom cells during cell wall formation. Several fluorescent dyes (mostly rhodamines) known as strong laser dyes, were tested for a possible application within this method. The results of this work show that half of the tested rhodamines can be applied for an in vivo-fluorochromation of diatom cells. For a successful incorporation into the diatom cell wall, a relatively low toxicity to diatom cells is necessary. Replacement of the carbon acid function at the carboxyphenyl ring of the rhodamine by a methyl or ethylester function showed to convert a rhodamine of relatively low toxicity to a rhodamine leading to severe lethal effects within the cells. In contrast to their carbon acid forms, which posses a net neutral charge of the molecule, rhodamine esters exhibit a net positive charge. The enhanced toxicological effects seem to be due to an increased accumulation of positive charged rhodamines within the mitochondria, an increased hydrophobicity due to the attachment of an alkyl substituent, an increased retention time of the dyes within the mitochondria and a therefore stronger negative effect on the mitochondrial membrane bound energy processes of the diatom cell. Therefore rhodamines with a positive net charge deriving from a methyl or ethylester function at the carboxy phenyl ring instead of a carbon acid substituent showed not to be suitable for long-term investigations/ biomineralization studies of diatoms. Investigations performed on diatom species of different orders showed that rhodamine 19, rhodamine B, and rhodamine 101 can presumably be successfully applied for in vivo-fluorochromation to all diatom species. The results obtained here can help to find further laser dyes for an in vivo-fluorochromation of diatom cells and therefore for the production of fluorescent nanostructural elements for a detailed optical investigation of the diatom cell wall. First optical measurements performed on in vivo-fluorochromated cell walls did not give any hints concerning the photonic structure of the diatom cell. Cell wall parts with different nanostructural elements were investigated and by comparison of the obtained fluorescence emission spectra, no special features that might derive from photonic structural effects could be observed. Results concerning the concentration dependent shifts within the emission spectra, as well as the decrease of fluorescence intensity of the stained cell wall structures with increasing dye concentration, depict that several effects occurring by interaction of the molecules within the cell wall can have an impact on the technical application of fluorescent cell walls. It can be assumed that the investigation of the photonic crystal behaviour and the possibility to achieve laser action within the diatom cell wall can be hampered by molecular interactions. The results give hints to prevent such obstacles. Comparison of the recent findings and state of the art of in vivo-fluorochromation of diatom cell wall material, make clear that the here presented results are of importance and can offer a considerable contribution to the development and establishment of new biosilification markers, for diatoms as well as for other biosilifying organisms.

Nanocrystalline Ge Flash Memories: Electrical Characterization and Trap Engineering

Conventional floating gate non-volatile memories (NVMs) present critical issues for device scalability beyond the sub-90 nm node, such as gate length and tunnel oxide thickness reduction. Nanocrystalline germanium (nc-Ge) quantum dot flash memories are fully CMOS compatible technology based on discrete isolated charge storage nodules which have the potential of pushing further the scalability of conventional NVMs. Quantum dot memories offer lower operating voltages as compared to conventional floating-gate (FG) Flash memories due to thinner tunnel dielectrics which allow higher tunneling probabilities. The isolated charge nodules suppress charge loss through lateral paths, thereby achieving a superior charge retention time. Despite the considerable amount of efforts devoted to the study of nanocrystal Flash memories, the charge storage mechanism remains obscure. Interfacial defects of the nanocrystals seem to play a role in charge storage in recent studies, although storage in the nanocrystal conduction band by quantum confinement has been reported earlier. In this work, a single transistor memory structure with threshold voltage shift, Vth, exceeding ~1.5 V corresponding to interface charge trapping in nc-Ge, operating at 0.96 MV/cm, is presented. The trapping effect is eliminated when nc-Ge is synthesized in forming gas thus excluding the possibility of quantum confinement and Coulomb blockade effects. Through discharging kinetics, the model of deep level trap charge storage is confirmed. The trap energy level is dependent on the matrix which confines the nc-Ge.

Contribuição para o estudo do linfoma no cão em Portugal : análise da casuística em dois centros de referência

O linfoma é um grupo heterogéneo de neoplasias que apresentam morfologia variável e apresentações clínicas diversas, exigindo diferentes abordagens diagnósticas e terapêuticas. O prognóstico difere bastante entre os canídeos afectados. A presente dissertação refere-se a um estudo retrospectivo (2008-2012), de 50 canídeos com linfoma, com o objectivo de comparar os resultados obtidos com a bibliografia publicada, determinando ainda o impacto do imunofenótipo (B ou T) na sobrevida de cães com linfoma. Foi registado o mesmo número de machos e fêmeas e as raças mais frequentes foram o Boxer, Rottweiller e Cocker Spaniel. O diagnóstico da doença foi realizado maioritariamente por histopatologia de linfonodo (56%), revelando 84% de linfomas da forma multicêntrica. Quando determinado, o imunofenótipo mais frequente foi o de células B (69%). A maioria dos canídeos estava em estadios avançados da doença (III-V) (98%) no momento do diagnóstico, revelando 54% dos casos sub-estadio "b" segundo a OMS. O tratamento quimioterápico mais utilizado foi o protocolo CHOP (n=26) seguido do COP (n=9). A toxicidade hematológica e gastrointestinal secundárias à quimioterapia estiveram em igual número (22% cada), não se observando efeitos adversos em 56% dos cães com linfoma. Por último, o tempo médio de sobrevivência registado foi de 393 dias. Não foi encontrada uma relação estatísticamente significativa entre as variáveis (raça, sub-estadio e sexo) e o imunofenótipo de linfoma, sendo os tempos médios de sobrevivência de linfomas T e B semelhantes, 388 e 463 dias, respectivamente. No nosso caso, as principais diferenças encontradas, relativamente à bibliografia publicada, foram uma quantidade elevada de pacientes em sub-estadio "b" e os tempos médios de sobrevivência semelhantes para os diferentes imunofenótipos.