Cool-season turfgrass color and growth calibrated to leaf nitrogen

Tissue N analysis a tool available for N management of turfgrass. However, peer-reviewed calibration studies to determine optimum tissue N values are lacking. A field experiment with a mixed cool-season species lawn and a greenhouse experiment with Kentucky bluegrass (Poa pratensis L.) were conducted across 2 yr, each with randomized complete block design. Treatments were N application rates between 0 and 587 kg N ha-1 yr-1. In the field experiment, clipping samples were taken monthly from May to September, dried, ground, and analyzed for total N. Clippings samples were collected one to two mowings after plots were fertilized. Linear plateau models comparing relative clipping yield, Commission Internationale de l' Eclairage hue, and CM1000 index to leaf N concentrations were developed. In the greenhouse experiment, clipping samples were taken every 2 wk from May to October and composited across sample dates for leaf N analysis. Color and clipping yields were related to leaf N concentrations using linear plateau models. These models indicated small marginal improvements in growth or color when leaf N exceeded 30 g kg-1, suggesting that a leaf N test can separate turf with optimum leaf N concentrations from turf with below optimum leaf N concentrations. Plateaus in leaf N concentrations with increasing N fertilizer rates suggest, however, that this test may be unable to identify sites with excess available soil N when turf has been mowed before tissue sampling.

Early Oligocene continental climate ofthe Paleogene Basin in Hungary and Slovenia

This paper concentrates on the Early Oligocene palaeoclimate of the southern part of Eastern and Central Europe and gives a detailed climatological analysis, combined with leaf-morphological studies and modelling of the palaeoatmospheric CO2 level using stomatal and d13 C data. Climate data are calculated using the Coexistence Approach for Kiscellian floras of the Palaeogene Basin (Hungary and Slovenia) and coeval assemblages from Central and Southeastern Europe. Potential microclimatic or habitat variations are considered using morphometric analysis of fossil leaves from Hungarian, Slovenian and Italian floras. Reconstruction of CO2 is performed by applying a recently introduced mechanistic model. Results of climate analysis indicate distinct latitudinal and longitudinal climate patterns for various variables which agree well with reconstructed palaeogeography and vegetation. Calculated climate variables in general suggest a warm and frost-free climate with low seasonal variation of temperature. A difference in temperature parameters is recorded between localities from Central and Southeastern Europe, manifested mainly in the mean temperature of the coldest month. Results of morphometric analysis suggest microclimatic or habitat difference among studied floras. Extending the scarce information available on atmospheric CO2 levels during the Oligocene, we provide data for a well-defined time-interval. Reconstructed atmospheric CO2 levels agree well with threshold values for Antarctic ice sheet growth suggested by recent modelling studies. The successful application of the mechanistic model for the reconstruction of atmospheric CO2 levels raises new possibitities for future climate inference from macro-flora studies.

Skeletal density of Porites

Paleotemperature estimates based on coral Sr/Ca have not been widely accepted because the reconstructed glacial-Holocene shift in tropical sea-surface temperature (~4-6°C) is larger than that indicated by foraminiferal Mg/Ca (~2-4°C). We show that corals over-estimate changes in sea-surface temperature (SST) because their records are attenuated during skeletogenesis within the living tissue layer. To quantify this process, we microprofiled skeletal mass accumulation within the tissue layer of Porites from Australasian coral reefs and laboratory culturing experiments. The results show that the sensitivity of the Sr/Ca and d18O thermometers in Porites will be suppressed, variable, and dependent on the relationship between skeletal growth rate and mass accumulation within the tissue layer. Our findings help explain why d18O-SST sensitivities for Porites range from -0.08 per mil/°C to -0.22 per mil/°C and are always less than the value of -0.23 per mil/°C established for biogenic aragonite. Based on this observation, we recalibrated the coral Sr/Ca thermometer to determine a revised sensitivity of -0.084 mmol/mol/°C. After rescaling, most of the published Sr/Ca-SST estimates for the Indo-Pacific region for the last ~14,000 years (-7°C to +2°C relative to modern) fall within the 95% confidence envelope of the foraminiferal Mg/Ca-SST records. We conclude that two types of calibration scales are required for coral paleothermometry; an attenuated Porites-specific thermometer sensitivity for studies of seasonal to interannual change in SST and, importantly, the rescaled -0.084 mmol/mol/°C Sr/Ca sensitivity for studies of 20th-century trends and millennial-scale changes in mean SST. The calibration-scaling concept will apply to the development of transfer functions for all geochemical tracers in corals.

Allocation of 14C assimilated in late spring to tissue and biochemical stem components of cork oak (Quercus suber L.) over the seasons

Carbon distribution in the stem of 2-year-old cork oak plants was studied by 14CO2 pulse labeling in late spring in order to trace the allocation of photoassimilates to tissue and biochemical stem components of cork oak. The fate of 14C photoassimilated carbon was followed during two periods: the first 72 h (short-term study) and the first 52 weeks (long-term study) after the 14CO2 photosynthetic assimilation. The results showed that 14C allocation to stem tissues was dependent on the time passed since photoassimilation and on the season of the year. In the first 3 h all 14C was found in the polar extractives. After 3 h, it started to be allocated to other stem fractions. In 1 day, 14C was allocated mostly to vascular cambium and, to a lesser extent, to primary phloem; no presence of 14C was recorded for the periderm. However, translocation of 14C to phellem was observed from 1 week after 14CO2 pulse labeling. The phellogen was not completely active in its entire circumference at labeling, unlike the vascular cambium; this was the tissue that accumulated most photoassimilated 14C at the earliest sampling. The fraction of leaf-assimilated 14C that was used by the stem peaked at 57% 1 week after 14CO2 plant exposure. The time lag between C photoassimilation and suberin accumulation was ∼8 h, but the most active period for suberin accumulation was between 3 and 7 days. Suberin, which represented only 1.77% of the stem weight, acted as a highly effective sink for the carbon photoassimilated in late spring since suberin specific radioactivity was much higher than for any other stem component as early as only 1 week after 14C plant labeling. This trend was maintained throughout the whole experiment. The examination of microautoradiographs taken over 1 year provided a new method for quantifying xylem growth. Using this approach it was found that there was more secondary xylem growth in late spring than in other times of the year, because the calculated average cell division time was much shorter.

Ultrastructure of Plant Leaf Cuticles in relation to Sample Preparation as Observed by Transmission Electron Microscopy

The leaf cuticular ultrastructure of some plant species has been examined by transmission electron microscopy (TEM) in only few studies. Attending to the different cuticle layers and inner structure, plant cuticles have been grouped into six general morphological types. With the aim of critically examining the effect of cuticle isolation and preparation for TEM analysis on cuticular ultrastructure, adaxial leaf cuticles of blue-gum eucalypt, grey poplar, and European pear were assessed, following a membrane science approach. The embedding and staining protocols affected the ultrastructure of the cuticles analysed. The solubility parameter, surface tension, and contact angles with water of pure Spurr's and LR-White resins were within a similar range. Differences were however estimated for resin : solvent mixtures, since Spurr’s resin is combined with acetone and LR-White resin is mixed with ethanol. Given the composite hydrophilic and lipophilic nature of plant cuticles, the particular TEM tissue embedding and staining procedures employed may affect sample ultrastructure and the interpretation of the results in physicochemical and biological terms. It is concluded that tissue preparation procedures may be optimised to facilitate the observation of the micro- and nanostructure of cuticular layers and components with different degrees of polarity and hydrophobicity.

Wettability, polarity and water absorption of Quercus ilex leaves: effect of leaf side and age

Plant trichomes play important protective functions and may have a major influence on leaf surface wettability. With the aim of gaining insight into trichome structure, composition and function in relation to water-plant surface interactions, we analyzed the adaxial and abaxial leaf surface of Quercus ilex L. (holm oak) as model. By measuring the leaf water potential 24 h after the deposition of water drops on to abaxial and adaxial surfaces, evidence for water penetration through the upper leaf side was gained in young and mature leaves. The structure and chemical composition of the abaxial (always present) and adaxial (occurring only in young leaves) trichomes were analyzed by various microscopic and analytical procedures. The adaxial surfaces were wettable and had a high degree of water drop adhesion in contrast to the highly unwettable and water repellent abaxial holm oak leaf sides. The surface free energy, polarity and solubility parameter decreased with leaf age, with generally higher values determined for the abaxial sides. All holm oak leaf trichomes were covered with a cuticle. The abaxial trichomes were composed of 8% soluble waxes, 49% cutin, and 43% polysaccharides. For the adaxial side, it is concluded that trichomes and the scars after trichome shedding contribute to water uptake, while the abaxial leaf side is highly hydrophobic due to its high degree of pubescence and different trichome structure, composition and density. Results are interpreted in terms of water-plant surface interactions, plant surface physical-chemistry, and plant ecophysiology.

Urban trees and atmospheric pollutants in big cities: Effects in Madrid

Una investigación sobre la mejora de la contaminación del aire (CA) por medio de arbolado urbano se realizó en Madrid, una ciudad con casi 4 M de habitantes, 2,8 M de vehículos y casi 3 M de árboles de mantenimiento público. La mayoría de los árboles estaban en dos bosques periurbanos. Los 650.000 restantes era pies de alineación y parques. Los taxones estudiados fueron Platanus orientalis (97.205 árboles), Ulmus sp. (70.557), Pinus pinea (49.038), Aesculus hippocastanum (22.266), Cedrus sp. (13.678) y Quercus ilex (1.650), de calles y parques. Muestras foliares se analizaron en diferentes épocas del año, así como datos de contaminación por PM10 de 28 estaciones de medición de la contaminación durante 30 años, y también la intensidad del tráfico (IMD) en 2.660 calles. La acumulación de metales pesados (MP) sobre hojas y dentro de estas se estimó en relación con la CA y del suelo y la IMD del tráfico. La concentración media de Ba, Cd, Cr, Cu, Mn, Ni, Pb y Zn en suelo (materia seca) alcanzó: 489,5, 0,7, 49,4, 60,9, 460,9, 12,8, 155,9 y 190,3 mg kg-1 respectivamente. Los árboles urbanos, particularmente coníferas (debido a la mayor CA en invierno) contribuyen significativamente a mejorar la CA sobre todo en calles con alta IMD. La capacidad de las seis sp. para capturar partículas de polvo en su superficies foliares está relacionada con la IMD del tráfico y se estimó en 16,8 kg/año de MP tóxicos. Pb y Zn resultaron ser buenos marcadores antrópicos en la ciudad en relación con el tráfico, que fue la principal fuente de contaminación en los árboles y suelos de Madrid. Las especies de árboles variaron en función de su capacidad para capturar partículas (dependiendo de las propiedades de sus superficies foliares) y acumular los MP absorbidos de los suelos. Las concentraciones foliares de Pb y Zn estuvieron por encima de los límites establecidos en diferentes sitios de la ciudad. La microlocalización de Zn mediante microscópico mostró la translocación al xilema y floema. Se detectaron puntos de contaminación puntual de Cu and Cr en antiguos polígonos industriales y la distribución espacial de los MP en los suelos de Madrid mostró que en incluso en zonas interiores del El Retiro había ciertos niveles elevados de [Pb] en suelo, tal vez por el emplazamiento la Real Fábrica de Porcelana en la misma zona hace 200 años. Distintas áreas del centro de la ciudad también alcanzaron niveles altos de [Pb] en suelo. Según los resultados, el empleo de una combinación de Pinus pinea con un estrato intermedio de Ulmus sp. y Cedrus sp. puede ser la mejor recomendación como filtro verde eficiente. El efecto del ozono (O3) sobre el arbolado en Madrid fue también objeto de este estudio. A pesar de la reducción de precursores aplicada en muchos países industrializados, O3 sigue siendo la principal causa de CA en el hemisferio norte, con el aumento de [O3] de fondo. Las mayores [O3] se alcanzaron en regiones mediterráneas, donde el efecto sobre la vegetación natural es compensado por el xeromorfismo y la baja conductancia estomática en respuesta los episodios de sequía estival característicos de este clima. Durante una campaña de monitoreo, se identificaron daños abióticos en hojas de encina parecidos a los de O3 que estaban plantadas en una franja de césped con riego del centro de Madrid. Dada la poca evidencia disponible de los síntomas de O3 en frondosas perennifolias, se hizo un estudio que trató de 1) confirman el diagnóstico de daño de O3, 2) investigar el grado de los síntomas en encinas y 3) analizar los factores ambientales que contribuyeron a los daños por O3, en particular en lo relacionado con el riego. Se analizaron los marcadores macro y micromorfológicos de estrés por O3, utilizando las mencionadas encinas a modo de parcela experimental. Los síntomas consistieron en punteado intercostal del haz, que aumentó con la edad. Además de un punteado subyacente, donde las células superiores del mesófilo mostraron reacciones características de daños por O3. Las células próximas a las zonas dañadas, presentaron marcadores adicionales de estrés oxidativo. Estos marcadores morfológicos y micromorfológicos de estrés por O3 fueron similares a otras frondosas caducifolias con daños por O3. Sin embargo, en nuestro caso el punteado fue evidente con AOT40 de 21 ppm•h, asociada a riego. Análisis posteriores mostraron que los árboles con riego aumentaron su conductancia estomática, con aumento de senescencia, manteniéndose sin cambios sus características xeromórficas foliares. Estos hallazgos ponen de relieve el papel primordial de la disponibilidad de agua frente a las características xeromórficas a la hora de manifestarse los síntomas en las células por daños de O3 en encina. ABSTRACT Research about air pollution mitigation by urban trees was conducted in Madrid (Spain), a southern European city with almost 4 M inhabitants, 2.8 M daily vehicles and 3 M trees under public maintenance. Most trees were located in two urban forests, while 650'000 trees along urban streets and in parks. The urban taxa included Platanus orientalis (97'205 trees), Ulmus sp. (70’557), Pinus pinea (49'038), Aesculus hippocastanum (22’266), Cedrus sp. (13'678 and Quercus ilex (1'650) along streets and parks. Leave samples were analysed sequentially in different seasons, PM10 data from 28 air monitoring stations during 30 years and traffic density estimated from 2’660 streets. Heavy metal (HM) accumulation on the leaf surface and within leaves was estimated per tree related to air and soil pollution, and traffic intensity. Mean concentration of Ba, Cd, Cr, Cu, Mn, Ni, Pb and Zn in topsoil samples (dry mass) amounted in Madrid: 489.5, 0.7, 49.4, 60.9, 460.9, 12.8, 155.9 and 190.3 mg kg-1 respectively. Urban trees, particularly conifers (due to higher pollution in winter) contributed significantly to alleviate air pollution especially near to high ADT roads. The capacity of the six urban street trees species to capture air-born dust on the foliage surface as related to traffic intensity was estimated to 16.8 kg of noxious metals from exhausts per year. Pb and Zn pointed to be tracers of anthropic activity in the city with vehicle traffic as the main source of diffuse pollution on trees and soils. Tree species differed by their capacity to capture air-borne dust (by different leaf surface properties) and to allocate HM from soils. Pb and Zn concentrations in the foliage were above limits in different urban sites and microscopic Zn revelation showed translocation in xylem and phloem tissue. Punctual contamination in soils by Cu and Cr was identified in former industrial areas and spatial trace element mapping showed for central Retiro Park certain high values of [Pb] in soils even related to a Royal pottery 200 years ago. Different areas in the city centre also reached high levels [Pb] in soils. According to the results, a combination of Pinus pinea with understorey Ulmus sp. and Cedrus sp. layers can be recommended for the best air filter efficiency. The effects of ozone (O3) on trees in different areas of Madrid were also part of this study. Despite abatement programs of precursors implemented in many industrialized countries, ozone remained the main air pollutant throughout the northern hemisphere with background [O3] increasing. Some of the highest ozone concentrations were measured in regions with a Mediterranean climate but the effect on the natural vegetation is alleviated by low stomatal uptake and frequent leaf xeromorphy in response to summer drought episodes characteristic of this climate. During a bioindication survey, abiotic O3-like injury was identified in foliage. Trees were growing on an irrigated lawn strip in the centre of Madrid. Given the little structural evidence available for O3 symptoms in broadleaved evergreen species, a study was undertaken in 2007 with the following objectives 1) confirm the diagnosis, 2) investigate the extent of symptoms in holm oaks growing in Madrid and 3) analyse the environmental factors contributing to O3 injury, particularly, the site water supply. Therefore, macro- and micromorphological markers of O3 stress were analysed, using the aforementioned lawn strip as an intensive study site. Symptoms consisted of adaxial and intercostal stippling increasing with leaf age. Underlying stippling, cells in the upper mesophyll showed HR-like reactions typical of ozone stress. The surrounding cells showed further oxidative stress markers. These morphological and micromorphological markers of ozone stress were similar to those recorded in deciduous broadleaved species. However, stippling became obvious already at an AOT40 of 21 ppm•h and was primarily found at irrigated sites. Subsequent analyses showed that irrigated trees had their stomatal conductance increased and leaf life-span reduced whereas their leaf xeromorphy remained unchanged. These findings suggest a central role of water availability versus leaf xeromorphy for ozone symptom expression by cell injury in holm oak.

Respuesta fisiológica y agronómica del olivar en seto (cv. Arbequina) a la orientación de filas y al ancho de calle: relación entre la producción y calidad del aceite y la radiación interceptada

En las últimas dos décadas, los productores han plantado olivares en seto para lograr la mecanización de la poda y en especial de la cosecha, reducir los costes de mano de obra y permitir intervenciones de manejo rápidas y oportunas. Los olivares se desarrollaron en ausencia del conocimiento científico, sobre el diseño óptimo de la estructura de la copa, necesario para incrementar la producción y calidad del aceite. En contraste, con los árboles muy espaciados y distribuidos uniformemente de las plantaciones tradicionales, en el olivar en seto hay una marcada variabilidad espacial y temporal de la radiación disponible en función del diseño de la plantación. Así, conocer la respuesta fisiológica y productiva del olivo a la radiación resulta fundamental en el olivar en seto. La orientación de las filas y el ancho de calle son aspectos que se deciden en el diseño de las plantaciones en seto. Ambos aspectos modifican la radiación interceptada por la canopia y, por lo tanto, pueden incidir en la productividad y calidad del aceite. Una vez realizada la plantación no pueden ser modificados, y así las ventajas o desventajas permanecerán fijas durante toda la vida productiva del olivar. A pesar de esto, el impacto de la orientación de las filas y el ancho de calle han recibido poca atención en olivos y en la mayoría de los frutales conducidos en seto. Por todo ello, los objetivos principales de esta tesis fueron, (i) evaluar el efecto de la orientación del seto y del ancho de calle, sobre la productividad y calidad del aceite, (ii) evaluar un modelo que estime la radiación dentro de la canopia. Este modelo permitirá cuantificar las relaciones entre la radiación y los componentes del rendimiento y calidad del aceite de olivares en setos con un amplio rango de estructuras y (iii) conocer la variabilidad en las características de las hojas (morfológicas y fisiológicas) y de los tejidos del fruto (tamaño y composición) en diferentes posiciones de la copa de los setos. Para ello, se dispuso de 3 ensayos de olivar en seto (cv. Arbequina) implantados en 2008 en el municipio de La Puebla de Montalbán, Toledo. La primera cosecha fue en 2010 y a partir del 2012 los setos formaron una copa continua. A partir de ese año, los setos se mantuvieron mediante poda, con similar ancho (~1 m) y altura (~2,5 m), acordes a las dimensiones de la cosechadora vendimiadora. En los años 2012 y 2013 se estudió en profundidad la respuesta de las plantas de estos ensayos. En el ensayo 1, los setos fueron plantados con cuatro orientaciones de filas: N–S, NE–SO, NO–SE y E–O y el mismo ancho de calle (4 m). En los otros dos ensayos, los setos fueron plantados con tres anchos de calle (5,0, 4,0 y 2,5 m), y con filas orientadas N–S (ensayo 2) y E–O (ensayo 3). La respuesta de la orientación de las filas se evaluó a nivel de seto y de estratos del seto (alturas y caras), a través de mediciones del crecimiento de brotes, componentes reproductivos, características y temperatura del fruto, estado hídrico del suelo y de las plantas, fotosíntesis neta de las hojas y contenido de ácidos grasos. Los setos orientados NE–SO (2,7 t/ha) lograron la mayor producción de aceite, que fue significativamente más alta que la de los setos E–O (2,3 t/ha). La producción de aceite de los setos E–O no se diferenció estadísticamente de los setos N–S (2,5 t/ha). Las diferencias productivas entre orientaciones fueron explicadas por el número de frutos en cosecha, a su vez la variación en el número de frutos estuvo asociada al efecto de la orientación de las filas sobre el número de yemas desarrolladas y el porcentaje de inflorescencias fértiles. Las hojas en las caras iluminadas de los setos NE–SO y N–S presentaron mayor tasa fotosintética a la mañana (~10.0 h) que los setos E–O, en el año 2012, pero no en 2013. La orientación de las filas no tuvo un efecto significativo en el contenido de ácidos grasos de los aceites extraídos, esto ocurrió a pesar de variaciones en la temperatura interna de los frutos (3 °C) y de la radiación (40%) entre las distintas caras de los setos. La orientación del seto afectó significativamente al contenido relativo de agua del suelo, donde setos E–O presentaron valores más altos (12%) que setos N–S durante el verano y otoño. Sin embargo, el potencial hídrico de tallo fue similar entre orientaciones. En los ensayos 2 y 3, se evaluó el efecto que produce, a nivel de seto y de estratos (caras y alturas), reducir el ancho de calle de 5,0 a 4,0 y 2,5 m, en un seto orientado N–S y otro E–O, respectivamente. La relación entre altura/ancho de calle libre aumentó 0,6 a 0,8 y 1,6, al reducir 5,0, 4,0 y 2,5 m el ancho de calle, mientras la longitud de seto y el volumen de copa por hectárea incrementó 100% al reducir de 5,0 a 2,5 m, el ancho de calle. En los setos orientados N–S, la producción de aceite por ha acumulada en 4 campañas, incrementó significativamente un 52 %, al reducir de 5,0 a 2,5 m el ancho de calle. Los setos N–S con calle más estrecha (2,5 m) tuvieron un 19% menos frutos que los setos con calle más ancha (5,0 m) y a su vez el 60% de los mismos se localizaron los estratos altos de la canopia de los setos con calles estrecha en comparación al 40% en setos con calle de 5,0 m. En los estratos más bajos de los setos con calles de 2,5m hubo menor crecimiento de los brotes y los frutos tuvieron menor peso seco, contenido de aceite y madurez, que los frutos en los estratos bajos de los setos a 5,0 m. Los componentes del rendimiento y características de los frutos (agua y madurez) fueron similares entre la caras E y O, independientemente del ancho de calle. En los setos orientados E–O, la producción de aceite por ha acumulada en 4 campañas, no respondió significativamente al ancho de calle, debido a una disminución significativa en el número de frutos y producción de aceite por m de seto, al reducir de 5,0 a 2,5 m, el ancho de calle. En los setos orientados E–O, con calles de 5,0 m, los frutos presentaron similar peso seco, contenido de aceite y agua, en las caras S y N, sin embargo, cuando la calle fue reducida a 2,5, los frutos de la cara S fueron más pesado y maduros que en la cara N. Independientemente del ancho de calle y de la orientación del seto, el aceite presentó mayor contenido de ácidos palmitoleico, palmítico, esteárico y linoleico en los frutos del estrato más alto de la canopia disminuyendo hacia la base. En contraste, el contenido de ácido oleico aumentó desde el estrato más alto hacia la base de los setos. Las diferencias en el contenido de ácidos grasos entre la parte alta y baja de los setos, incrementó al reducir el ancho de calle en los setos N–S, pero no en los E-O. En conclusión, en olivares en seto, reducir el ancho de calle permite incrementar la producción de aceite, en setos orientados N–S, pero no en E–O. Un modelo que estima la cantidad y distribución de la radiación en toda la copa del seto, fue utilizado para estimar la radiación interceptada en distintos estratos del seto. El modelo requiere un valor del coeficiente de extinción (k) para estimar la transmisión de radiación a través de la copa, el cual fue obtenido experimentalmente (k=1,2). Utilizando los datos del ensayo 1, un único modelo lineal relacionó el peso seco y el rendimiento graso de setos con la radiación interceptada por los distintos estratos de setos con cuatro orientaciones de filas. La densidad de frutos fue también relacionada con la radiación, pero más débilmente. En los setos orientados N–S, plantados con tres anchos de calles, (ensayo 2) el contenido de ácidos palmitoleico y linoleico del aceite incrementó linealmente con el incremento de la radiación interceptada, mientras el contenido ácido oleico disminuyó linealmente con el incremento de la radiación. El contenido de ácidos grasos del aceite no estuvo relacionado con la radiación interceptada en setos orientados E–O (Ensayo 3). En los setos N–S y E–O, plantados con anchos de calle de 2,5 m, se estudiaron las interacciones entre la radiación y características de las hojas, número de fruto, tamaño y composición de los frutos a nivel de órgano, tejido y células. Independientemente de la orientación del seto, el área y el contenido de clorofila de las hojas incrementaron significativamente en los estratos más bajos de los setos. Mientras, las hojas de los estratos medios del seto presentaron mayor capacidad fotosintética que en los estratos bajos y alto de los setos. Los estratos del seto que interceptaron más radiación produjeron frutos con mayor tamaño y contenido de aceite en el mesocarpo, sin efectos sobre el tamaño y composición del endocarpo. A nivel celular, los frutos expuestos a mayor nivel de radiación desarrollaron en el mesocarpo células de mayor tamaño en comparación a frutos menos expuestos, mientras el número de células no fue afectado. Adicionalmente, el número y tamaño de las células estuvo relacionado con la composición del mesocarpo en términos de aceite, agua y peso seco menos aceite. Esta tesis, contribuye, desde una perspectiva integral del cultivo del olivo, a cuantificar el impacto de la orientación y ancho de calle sobre la producción y calidad del aceite en olivares conducidos en setos. El análisis y discusión de la relación entre la radiación y los componentes del rendimiento y calidad del aceite, puede ayudar a diseñar plantaciones en seto con dimensiones óptimas para la intercepción de la radiación. ABSTRACT In the last two decades, olive hedgerow system has been established by commercial growers to allow continuous mechanized pruning and especially harvest, reduce costs of manual labour and allow more rapid and timely management interventions. The adoption of hedgerow was done in the absence of adequate scientific knowledge of the impact of this orchard structure and associated mechanization on tree response, yield and quality, after centuries in low-density orchards and open-formed trees. The row orientation and width alley are fundamental aspects in the hedgerow design and have been scarcely studied in olive. Both aspects modify the radiation intercepted by the canopy, and consequently the productivity and oil quality, and once defined in orchard planting cannot be changed, so advantages and disadvantages remain fixed for the lifespan of the orchard. The main objectives of this thesis were to (i) evaluate the impact of the row orientation and width alley on productivity and oil quality by the measurements of profile of the determining processes of shoot growth, fruit temperature, yield components and fruit and oil characteristics on opposite sides of olive hedgerows. Additionally, the effect of row orientation on the plant water status was also evaluated; (ii) evaluate a mathematical model for estimating the radiation within the canopy and quantify the relationships between the radiation estimated and yield components and oil quality in olive hedgerows under wide range of structures and; (iii) determine the variability in the characteristics of the leaves (morphological and physiological) and fruit tissues (size and composition) in different positions of the hedgerows canopy. Three plots of olive hedgerows (cv. Arbequina) planted in 2008 in La Puebla de Montalbán, Toledo were evaluated during the 2012 and 2013 seasons. The hedgerows were maintained by lateral pruning and topping with the same width (1 m) and height (2.5 m) compatible with the intended harvester. In a plot (experiment 1), the hedgerows were planted with the same width alley (4 m) and four row orientations: N–S, NE–SW, NW–SE and E–W. Other two plots (Experiments 2 and 3) separated by approximately 100 m were planted with N–S and E–O oriented rows and three alley widths in each orientation: 5.0, 4.0 and 2.5 m. In the exp. 1, maximum fruit yield were achieved by NE–SW and NW–SW (15.7 t/ha). Of these, NE–SW achieved the highest oil yield (2.7 t/ha). There were no differences in fruit or oil yield between N–S (2.5 t oil/ha) and E–W (2.3 t oil/ha) orientations. Fruit number was the most important component to explain these differences, by previous influence on number of bud developed and percentage of fertile inflorescences. Fruit maturity and oil quality on both sides of the hedgerows were not affected by row orientation. This occurred despite significant variations in the internal fruit temperature, which was closely related to the irradiance received by the canopy and the time of day. Additionally, row orientation significantly affected the relative water content of the soil, where E–W oriented hedgerows showed consistently higher values than N–S during summer-autumn season. The stem water potential at midday, however, was similar between orientations, revealing possible lower water consumption of E–W than N–S oriented hedgerows. In the exp. 2, regardless of row orientation, reduction of row spacing from 5.0 to 4.0 and 2.5 m increases the ratio of canopy depth to free alley width (Al/An) from 0.6 to 0.8 and 1.6, respectively, and ads 25 and 100 % more hedgerow length per ha. In N–S oriented hedgerows, oil production per ha increased significantly by 14 and 52 % in 4.0 m and 2.5 m relative to 5.0 m row spacing, the effect being proportionally less than the increase in hedgerow length per ha. Hedgerows spaced 2.5 m with Al/An = 1.6 produced relatively fewer fruits per unit length than did wider spacings and were preferentially distributed in upper layers. Fruits located at the bottom of the canopy were smaller, with lower oil content and were less mature. In E–W oriented hedgerows, oil production per ha did not respond significantly to row spacing, despite the doubling of row length from the 5.0 to the 2.5 m row spacing. The explanation was found in fewer fruit per unit length of hedgerow and smaller oil content at 2.5 m than 5.0 m row spacing, averaged over the experimental period. In E–W hedgerows spaced at 5.0 m with Al/An = 0.6, the vertical profiles of fruit characteristics (mass, oil and water contents, and maturity) were similar between opposing sides, but at 4.0 m (Al/An= 0.8) and 2.5 m (Al/An=1.6) spacings, fruits on the S side were heavier and more mature than on N side. The oil extracted from fruits harvested at different heights of N–S and E–W oriented hedgerows showed higher palmitoleic, palmitic, stearic and linoleic contents at the canopy top decreasing toward base. The oleic content was reverse, increased from top to base. In N–S hedgerows, vertical gradients increased by reducing the alley width, but not in the E–W oriented hedgerows. The simulation of internal canopy irradiance was related in a single relationship (R2 = 0.63) to the vertical profiles of fruit weight and oil content of olive hedgerows with wide range of structures. The density of fruits was also associated with the irradiance but more weakly (R2 = 0.27), and revealed a more complex response involving changes in the vegetative structure by canopy management (topping) and the effect of radiation on the previous sequence that defines the number of fruits. The vertical profiles of oil quality traits were closely associated to canopy irradiance, but only when the N–S oriented hedgerows were considered. The contents of palmitoleic and linoleic acid in the oil increased linearly when intercepted irradiance increased from 9 to 19 mol PAR/m2. In contrast, oleic content decreased linearly in this irradiance range. Additionally, we advanced knowledge regarding the interactions among irradiance and leaf, fruit number, size and composition at organ-, tissue- and cellular- levels. The irradiance received at different positions in the canopy strongly affected the leaf area and chlorophyll content, and mesocarp size and composition (water and oil), without effects on endocarp size and composition. At the cellular level, light-exposed fruit developed larger mesocarp cells than shaded fruits, but cell number was not affected. Our results indicate that cell number and size are related to mesocarp composition in term of oil, water, and dry weight menus oil, although the specific manner in which they interact remains to be determined. This research contributes from an integral perspective of olive growing to quantify the impact of row orientation and width alley on productivity and oil quality in hedgerows systems. The analysis and discussion of the relationships between radiation and yield components and oil quality can help understand the impact of design olive hedgerows in general and in a wide range of environmental conditions.

Leaf-specifically expressed genes for polypeptides destined for chloroplasts with domains of σ70 factors of bacterial RNA polymerases in Arabidopsis thaliana

Genes for σ-like factors of bacterial-type RNA polymerase have not been characterized from any multicellular eukaryotes, although they probably play a crucial role in the expression of plastid photosynthesis genes. We have cloned three distinct cDNAs, designated SIG1, SIG2, and SIG3, for polypeptides possessing amino acid sequences for domains conserved in σ70 factors of bacterial RNA polymerases from the higher plant Arabidopsis thaliana. Each gene is present as one copy per haploid genome without any additional sequences hybridized in the genome. Transient expression assays using green fluorescent protein demonstrated that N-terminal regions of the SIG2 and SIG3 ORFs could function as transit peptides for import into chloroplasts. Transcripts for all three SIG genes were detected in leaves but not in roots, and were induced in leaves of dark-adapted plants in rapid response to light illumination. Together with results of our previous analysis of tissue-specific regulation of transcription of plastid photosynthesis genes, these results indicate that expressed levels of the genes may influence transcription by regulating RNA polymerase activity in a green tissue-specific manner.

Phase identity of the maize leaf is determined after leaf initiation

The vegetative development of the maize shoot can be divided into juvenile and adult phases based on the types of leaves produced at different times in shoot development. Models for the regulation of phase change make explicit predictions about when the identity of these types of leaves is determined. To test these models, we examined the timing of leaf type determination in maize. Clones induced in transition leaf primordia demonstrated that the juvenile and adult regions of these leaves do not become clonally distinct until after the primordium is 700 μm in length, implying that these cell fates were undetermined at this stage of leaf development. Adult shoot apices were cultured in vitro to induce rejuvenation. We found that leaf primordia as large as 3 mm in length can be at least partially rejuvenated by this treatment, and the location of rejuvenated tissue is correlated with the maturation pattern of the leaf. The amount and distribution of juvenile tissue in rejuvenated leaves suggests that rejuvenation occurs nearly simultaneously in all leaf primordia. In vitro culture rejuvenated existing leaf primordia and the P0 primordium, but did not change the identity of subsequent primordia or the total number of leaves produced by the shoot. This result suggests that leaf identity can be regulated independently of the identity of the shoot apical meristem, and it implies that vegetative phase change is not initiated by a change in the identity of the shoot apical meristem.

Effects of elevated atmospheric CO2 concentration on leaf dark respiration of Xanthium strumarium in light and in darkness

Leaf dark respiration (R) is an important component of plant carbon balance, but the effects of rising atmospheric CO2 on leaf R during illumination are largely unknown. We studied the effects of elevated CO2 on leaf R in light (RL) and in darkness (RD) in Xanthium strumarium at different developmental stages. Leaf RL was estimated by using the Kok method, whereas leaf RD was measured as the rate of CO2 efflux at zero light. Leaf RL and RD were significantly higher at elevated than at ambient CO2 throughout the growing period. Elevated CO2 increased the ratio of leaf RL to net photosynthesis at saturated light (Amax) when plants were young and also after flowering, but the ratio of leaf RD to Amax was unaffected by CO2 levels. Leaf RN was significantly higher at the beginning but significantly lower at the end of the growing period in elevated CO2-grown plants. The ratio of leaf RL to RD was used to estimate the effect of light on leaf R during the day. We found that light inhibited leaf R at both CO2 concentrations but to a lesser degree for elevated (17–24%) than for ambient (29–35%) CO2-grown plants, presumably because elevated CO2-grown plants had a higher demand for energy and carbon skeletons than ambient CO2-grown plants in light. Our results suggest that using the CO2 efflux rate, determined by shading leaves during the day, as a measure for leaf R is likely to underestimate carbon loss from elevated CO2-grown plants.

Structure, Properties, and Tissue Localization of Apoplastic α-Glucosidase in Crucifers1

Apoplastic α-glucosidases occur widely in plants but their function is unknown because appropriate substrates in the apoplast have not been identified. Arabidopsis contains at least three α-glucosidase genes; Aglu-1 and Aglu-3 are sequenced and Aglu-2 is known from six expressed sequence tags. Antibodies raised to a portion of Aglu-1 expressed in Escherichia coli recognize two proteins of 96 and 81 kD, respectively, in vegetative tissues of Arabidopsis, broccoli (Brassica oleracea L.), and mustard (Brassica napus L.). The acidic α-glucosidase activity from broccoli flower buds was purified using concanavalin A and ion-exchange chromatography. Two active fractions were resolved and both contained a 96-kD immunoreactive polypeptide. The N-terminal sequence from the 96-kD broccoli α-glucosidase indicated that it corresponds to the Arabidopsis Aglu-2 gene and that approximately 15 kD of the predicted N terminus was cleaved. The 81-kD protein was more abundant than the 96-kD protein, but it was not active with 4-methylumbelliferyl-α-d-glucopyranoside as the substrate and it did not bind to concanavalin A. In situ activity staining using 5-bromo-4-chloro-3-indolyl-α-d-glucopyranoside revealed that the acidic α-glucosidase activity is predominantly located in the outer cortex of broccoli stems and in vascular tissue, especially in leaf traces.

Water Deficit and Spatial Pattern of Leaf Development. Variability in Responses Can Be Simulated Using a Simple Model of Leaf Development1

We analyzed the effect of short-term water deficits at different periods of sunflower (Helianthus annuus L.) leaf development on the spatial and temporal patterns of tissue expansion and epidermal cell division. Six water-deficit periods were imposed with similar and constant values of soil water content, predawn leaf water potential and [ABA] in the xylem sap, and with negligible reduction of the rate of photosynthesis. Water deficit did not affect the duration of expansion and division. Regardless of their timing, deficits reduced relative expansion rate by 36% and relative cell division rate by 39% (cells blocked at the G0-G1 phase) in all positions within the leaf. However, reductions in final leaf area and cell number in a given zone of the leaf largely differed with the timing of deficit, with a maximum effect for earliest deficits. Individual cell area was only affected during the periods when division slowed down. These behaviors could be simulated in all leaf zones and for all timings by assuming that water deficit affects relative cell division rate and relative expansion rate independently, and that leaf development in each zone follows a stable three-phase pattern in which duration of each phase is stable if expressed in thermal time (C. Granier and F. Tardieu [1998b] Plant Cell Environ 21: 695–703).

Epicuticular Wax Accumulation and Fatty Acid Elongation Activities Are Induced during Leaf Development of Leeks1

Epicuticular wax production was evaluated along the length of expanding leek (Allium porrum L.) leaves to gain insight into the regulation of wax production. Leaf segments from the bottom to the top were analyzed for (a) wax composition and load; (b) microsomal fatty acid elongase, plastidial fatty acid synthase, and acyl-acyl carrier protein (ACP) thioesterase activities; and (c) tissue and cellular morphological changes. The level of total wax, which was low at the bottom, increased 23-fold along the length of the leaf, whereas accumulation of the hentriacontan-16-one increased more than 1000-fold. The onset of wax accumulation was not linked to cell elongation but, rather, occurred several centimeters above the leaf base. Peak microsomal fatty acid elongation activity preceded the onset of wax accumulation, and the maximum fatty acid synthase activity was coincident with the onset. The C16:0- and C18:0-ACP-hydrolyzing activities changed relatively little along the leaf, whereas C18:1-ACP-hydrolyzing activity increased slightly prior to the peak elongase activity. Electron micrographic analyses revealed that wax crystal formation was asynchronous among cells in the initial stages of wax deposition, and morphological changes in the cuticle and cell wall preceded the appearance of wax crystals. These studies demonstrated that wax production and microsomal fatty acid elongation activities were induced within a defined and identifiable region of the expanding leek leaf and provide the foundation for future molecular studies.