Performance evaluation of low environmental impact asphalt concretes using the mechanistic empirical design method based on laboratory fatigue and permanent deformation models

The "sustainability" concept relates to the prolonging of human economic systems with as little detrimental impact on ecological systems as possible. Construction that exhibits good environmental stewardship and practices that conserve resources in a manner that allow growth and development to be sustained for the long-term without degrading the environment are indispensable in a developed society. Past, current and future advancements in asphalt as an environmentally sustainable paving material are especially important because the quantities of asphalt used annually in Europe as well as in the U.S. are large. The asphalt industry is still developing technological improvements that will reduce the environmental impact without affecting the final mechanical performance. Warm mix asphalt (WMA) is a type of asphalt mix requiring lower production temperatures compared to hot mix asphalt (HMA), while aiming to maintain the desired post construction properties of traditional HMA. Lowering the production temperature reduce the fuel usage and the production of emissions therefore and that improve conditions for workers and supports the sustainable development. Even the crumb-rubber modifier (CRM), with shredded automobile tires and used in the United States since the mid 1980s, has proven to be an environmentally friendly alternative to conventional asphalt pavement. Furthermore, the use of waste tires is not only relevant in an environmental aspect but also for the engineering properties of asphalt [Pennisi E., 1992]. This research project is aimed to demonstrate the dual value of these Asphalt Mixes in regards to the environmental and mechanical performance and to suggest a low environmental impact design procedure. In fact, the use of eco-friendly materials is the first phase towards an eco-compatible design but it cannot be the only step. The eco-compatible approach should be extended also to the design method and material characterization because only with these phases is it possible to exploit the maximum potential properties of the used materials. Appropriate asphalt concrete characterization is essential and vital for realistic performance prediction of asphalt concrete pavements. Volumetric (Mix design) and mechanical (Permanent deformation and Fatigue performance) properties are important factors to consider. Moreover, an advanced and efficient design method is necessary in order to correctly use the material. A design method such as a Mechanistic-Empirical approach, consisting of a structural model capable of predicting the state of stresses and strains within the pavement structure under the different traffic and environmental conditions, was the application of choice. In particular this study focus on the CalME and its Incremental-Recursive (I-R) procedure, based on damage models for fatigue and permanent shear strain related to the surface cracking and to the rutting respectively. It works in increments of time and, using the output from one increment, recursively, as input to the next increment, predicts the pavement conditions in terms of layer moduli, fatigue cracking, rutting and roughness. This software procedure was adopted in order to verify the mechanical properties of the study mixes and the reciprocal relationship between surface layer and pavement structure in terms of fatigue and permanent deformation with defined traffic and environmental conditions. The asphalt mixes studied were used in a pavement structure as surface layer of 60 mm thickness. The performance of the pavement was compared to the performance of the same pavement structure where different kinds of asphalt concrete were used as surface layer. In comparison to a conventional asphalt concrete, three eco-friendly materials, two warm mix asphalt and a rubberized asphalt concrete, were analyzed. The First Two Chapters summarize the necessary steps aimed to satisfy the sustainable pavement design procedure. In Chapter I the problem of asphalt pavement eco-compatible design was introduced. The low environmental impact materials such as the Warm Mix Asphalt and the Rubberized Asphalt Concrete were described in detail. In addition the value of a rational asphalt pavement design method was discussed. Chapter II underlines the importance of a deep laboratory characterization based on appropriate materials selection and performance evaluation. In Chapter III, CalME is introduced trough a specific explanation of the different equipped design approaches and specifically explaining the I-R procedure. In Chapter IV, the experimental program is presented with a explanation of test laboratory devices adopted. The Fatigue and Rutting performances of the study mixes are shown respectively in Chapter V and VI. Through these laboratory test data the CalME I-R models parameters for Master Curve, fatigue damage and permanent shear strain were evaluated. Lastly, in Chapter VII, the results of the asphalt pavement structures simulations with different surface layers were reported. For each pavement structure, the total surface cracking, the total rutting, the fatigue damage and the rutting depth in each bound layer were analyzed.

Lexical Development in Adult Beginning Second Language Learners

This research tests the hypothesis that knowledge of derivational morphology facilitates vocabulary acquisition in beginning adult second language learners. Participants were mono-lingual English-speaking college students aged 18 years and older enrolled inintroductory Spanish courses. Knowledge of Spanish derivational morphology was tested through the use of a forced-choice translation task. Spanish lexical knowledge was measured by a translation task using direct translation (English word) primes and conceptual (picture) primes. A 2x2x2 mixed factor ANOVA examined the relationships between morphological knowledge (strong, moderate), error type (form-based, conceptual), and prime type (direct translation, picture). The results are consistent with the existence of a relationship between knowledge of derivational morphology andacquisition of second language vocabulary. Participants made more conceptually-based errors than form-based errors F (1,22)=7.744, p=.011. This result is consistent with Clahsen & Felser’s (2006) and Ullman’s (2004) models of second language processing. Additionally, participants with Strong morphological knowledge made fewer errors onthe lexical knowledge task than participants with Moderate morphological knowledge t(23)=-2.656, p=.014. I suggest future directions to clarify the relationship between morphological knowledge and lexical development in adult second language learners.

Development of Values after Compulsory School: Work comes first, then family

During school-to-work transition, adolescents develop values and prioritize what is im-portant in their life. Values are concepts or beliefs about desirable states or behaviors that guide the selection or evaluation of behavior and events, and are ordered by their relative importance (Schwartz & Bilsky, 1987). Stressing the important role of values, career re-search has intensively studied the effect of values on educational decisions and early career development (e.g. Eccles, 2005; Hirschi, 2010; Rimann, Udris, & Weiss, 2000). Few re-searchers, however, have investigated so far how values develop in the early career phase and how value trajectories are influenced by individual characteristics. Values can be oriented towards specific life domains, such as work or family. Work values include intrinsic and extrinsic aspects of work (e.g., self-development, cooperation with others, income) (George & Jones, 1997). Family values include the importance of partner-ship, the creation of an own family and having children (Mayer, Kuramschew, & Trommsdroff, 2009). Research indicates that work values change considerably during early career development (Johnson, 2001; Lindsay & Knox, 1984). Individual differences in work values and value trajectories are found e.g., in relation to gender (Duffy & Sedlacek, 2007), parental background (Loughlin & Barling, 2001), personality (Lowry et al., 2012), educa-tion (Battle, 2003), and the anticipated timing of school-to-work transition (Porfeli, 2007). In contrast to work values, research on family value trajectories is rare and knowledge about the development during the school-to-work transition and early career development is lack-ing. This paper aims at filling this research gap. Focusing on family values and intrinsic work values and we expect a) family and work val-ues to change between ages 16 and 25, and b) that initial levels of family and work values as well as value change to be predicted by gender, reading literacy, ambition, and expected du-ration of education. Method. Using data from 2620 young adults (59.5% females), who participated in the Swiss longitudinal study TREE, latent growth modeling was employed to estimate the initial level and growth rate per year for work and family values. Analyses are based on TREE-waves 1 (year 2001, first year after compulsory school) to 8 (year 2010). Variables in the models included family values and intrinsic work values, gender, reading literacy, ambition and ex-pected duration of education. Language region was included as control variable. Results. Family values did not change significantly over the first four years after leaving compulsory school (mean slope = -.03, p =.36). They increased, however, significantly five years after compulsory school (mean slope = .13, p >.001). Intercept (.23, p < .001), first slope (.02, p < .001), and second slope (.01, p < .001) showed significant variance. Initial levels were higher for men and those with higher ambitions. Increases were found to be steeper for males as well as for participants with lower educational duration expectations and reading skills. Intrinsic work values increased over the first four years (mean slope =.03, p <.05) and showed a tendency to decrease in the years five to ten (mean slope = -.01, p < .10). Intercept (.21, p < .001), first slope (.01, p < .001), and second slope (.01, p < .001) showed signifi-cant variance, meaning that there are individual differences in initial levels and growth rates. Initial levels were higher for females, and those with higher ambitions, expecting longer educational pathways, and having lower reading skills. Growth rates were lower for the first phase and steeper for the second phase for males compared to females. Discussion. In general, results showed different patterns of work and family value trajecto-ries, and different individual factors related to initial levels and development after compul-sory school. Developments seem to fit to major life and career roles: in the first years after compulsory school young adults may be engaged to become established in one's job; later on, raising a family becomes more important. That we found significant gender differences in work and family trajectories may reflect attempts to overcome traditional roles, as over-all, women increase in work values and men increase in family values, resulting in an over-all trend to converge.

Local environmental knowledge: a key input for the sustainable development of Andean mountain communities

Local knowledge is crucial to both human development and environmental conservation. This is especially the case in mountain regions, where a combination of remoteness, harsh climatic conditions, rich cultural heritage, and high biological diversity has led to the development of complex local environmental knowledge systems. In the Andes for instance, rural populations mainly rely on their own environmental knowledge to ensure their food security and health. Recent studies conducted within Quechua communities in Peru and Bolivia showed that this knowledge was both persistent and dynamic, and that it responded to socio-economic and environmental changes through cultural resistance and adaptation. As this paper argues, combining local knowledge and so-called scientific knowledge – especially in development projects – can lead to innovative solutions to the socio-environmental challenges facing mountain communities in our globalized world. Based on experiences from the Andes, this paper will provide concrete recommendations to policymakers and practitioners for integrating local knowledge into development and natural resource management initiatives.

Impact of knowledge brokering on performance heterogeneity among business models

Purpose – The strategic management literature lacks a comprehensive explanation as to why seemingly similar business models in the same industry perform differently. This paper strives to explain this phenomenon. Design/methodology/approach – The model is conceptualized and accompanied by a case study on the airline industry to explain knowledge brokerage that creates value from the effective utilization of knowledge resources acquired from intra- and inter-firm environments. Findings – The model explains a cyclical view of business model flexibility in which the knowledge-based resource accumulation of the business model is spread across the intra- and inter-firm environments. Knowledge brokerage strategies from the inter- and intra-firm environments result in improved performance of the business model. The flexibility that the business model acquires is determined by how efficiently resource accumulation is aligned with its external environment. Originality/value – The paper effectively integrates the concepts of knowledge brokerage and business models from a resource accumulation-based view and simultaneously arrives at the performance heterogeneity of seemingly similar business models within the same industry. It has performance implications for firms that start out without any distinct resources of their own, or that use an imitated business model, to attain better performance through business model evolution aligned with successful knowledge brokerage strategies. It adds to the resource accumulation literature by explaining how resources can be effectively acquired to create value.

Elementos peatonales de las ciudades medias españolas : tipos, orígenes, relaciones y articulaciones

A través de esta tesis se busca aportar un análisis de los elementos peatonales que cubren las necesidades y las infraestructuras de apoyo al peatón, siendo un campo poco desarrollado en nuestro país a diferencia de otros como Dinamarca, Reino Unido, Alemania y Holanda, donde las actuaciones peatonales ejecutadas son tradicionales y muy exitosas. Se trata por tanto de un tema poco estudiado pero que adquiere singular importancia en estos años de búsqueda de nuevos modelos urbanos que eviten el derroche de recursos, y avancen hacia formas de movilidad más adecuadas a un mundo limitado y vulnerable. La investigación tiene un carácter eminentemente descriptivo cuyo principal valor es documentar y analizar sistemáticamente una realidad poco conocida, aportándose datos para entender el origen y desarrollo de las actuaciones peatonales. El propósito es ayudar a cimentar este campo en nuestro país, definiendo con precisión el estado de la cuestión geográficamente y dejando para un futuro una cartografía temática completa. El objeto general es estudiar y comprender los elementos peatonales de un número limitado de ciudades medias españolas, marcándose como objetivos específicos los siguientes: - Identificar y describir los principales elementos que conforman la red peatonal de las ciudades. ‐ Estudiar las tipologías espaciales dominantes, sus características y orígenes, pudiendo distinguir de un lado, las desarrolladas en la ciudad consolidada, como las actuaciones en los cascos antiguos; y por otro, las ejecutadas en la ciudad nueva a través de fórmulas arquitectónicas generalmente residenciales con espacios peatonales adjuntos. ‐ Analizar los referidos elementos para comprobar si han conformado redes de uso peatonal, si se han constituido articulando la ciudad como en el caso de los ejes lineales en las ciudades con río o mar, o si han influenciado el carácter del entorno en el que se han realizado, centrando el interés en los cascos históricos peatonalizados. ‐ Comprobar si hay actuaciones complementarias a los procesos de urbanización y mejora urbanística, así como la aprobación de ayudas y subvenciones para afrontar las mismas. ‐ Finalmente, describir y evaluar los procesos y procedimientos mediante los que se produce la peatonalización de determinadas áreas urbanas, los orígenes, los instrumentos y fechas de su puesta en marcha, aportando una cronología peatonal. La metodología comienza con la acotación de 22 ciudades españolas, capitales de provincia con una población entre 100.000 y 500.000 habitantes según los datos del INE del año 2009. La distribución es equilibrada con la selección de ciudades de costa, de interior, con río/ría, con carácter patrimonial, ciudades en islas, etc. El análisis de los elementos peatonales de estas urbes se realiza gracias a la gran resolución de las bases cartográficas públicas y privadas que hay en la actualidad en internet, especialmente con el uso de las herramientas de Google Earth y Google Maps en su versión “street view”, softwares que permiten un paseo virtual de cada ciudad detallándose con gran precisión las actuaciones peatonales. Las ciudades elegidas son: ‐ 11 ciudades costeras: Alicante, Almería, Bilbao, Cádiz, Castellón de la Plana, Huelva, Las Palmas de Gran Canaria, Palma de Mallorca, Santander, San Sebastián y Tarragona. ‐ 11 ciudades de interior: Albacete, Burgos, Córdoba, León, Lérida, Logroño, Oviedo, Murcia, Pamplona, Valladolid y Vitoria. Finalmente, por tener los porcentajes mas elevados de las áreas peatonales de sus casco histórico, se eligen 3 casos de ciudades representativas para un desarrollo peatonal en profundidad, seleccionándose Burgos, San Sebastián y Pamplona. Otros aspectos metodológicos interesantes a destacar, es la extensa documentación adquirida a través de las fuentes de Internet, sobre todo a la hora de desarrollar el último capítulo “Procesos de peatonalización de las ciudades españolas” centrado en las 3 ciudades elegidas. Se consulta las hemerotecas de periódicos locales, los boletines oficiales, las actas de los plenos de los Ayuntamientos y los documentos de planificación (Planes Generales, Planes Especiales, Planes y Proyectos Municipales, Planes de Movilidad), adquiriéndose una precisa información en cuanto a la cronología de las fechas y extensión del trabajo. Se complementa la metodología con las entrevistas a actores claves en el proceso peatonal, como el personal técnico de los Ayuntamiento y los técnicos redactores de los proyectos; y con la colaboración directa de los técnicos de los consistorios de las 3 ciudades seleccionadas, aportando todo tipo de información demandada. En la tesis, se introduce los elementos peatonales mediante el estudio de los espacios peatonales y los procesos de peatonalización existentes, a través del análisis de la literatura consultada aportándose información valiosa en cuanto a la definición de los modelos peatonales, exponiéndose una breve historia de las peatonalizaciones. Destacan las publicaciones de los expertos europeos en la materia como los autores Carmen Hass-Klau, Rolf Monheim, Rob Krier y Collin Buchanan. En España, las actuaciones peatonales fueron tardías en el tiempo en comparación con el resto de Europa, con casi 40 años de retraso. Las referencias bibliográficas españolas en esta materia son escasas siendo las mas significativas las realizadas por Alfonso Sanz y por el profesor Julio Pozueta destacando una de sus últimas publicaciones “La ciudad paseable” describiéndose los elementos peatonales existentes en las ciudades, sirviendo como modelo y ejemplo para esta investigación. En base a lo anterior, se definen los elementos peatonales como aquellos espacios públicos libres de edificación que, por sus características y diseño, garantizan un confortable uso estancial, de tránsito peatonal y están expresamente reservados para ello. En la tesis se detectan y se especifican los siguientes elementos peatonales: las calles y plazas peatonales, las aceras y bulevares de una anchura superior a 8 metros, los paseos peatonales, los elementos de paso (tradicionales y mecánicos), espacios peatonales ligados a nuevas áreas residenciales, los soportales y pasajes peatonales con una anchura mínima de 4 metros, recintos feriales, espacios libres y zonas verdes y parques. Para cada una de las 22 ciudades seleccionadas se realiza un exhaustivo inventario de los anteriores elementos a través de fichas, aportando un gran número de proyectos individuales ejecutados en cada urbe. Esta información se recoge gráficamente en 2 fotoplanos, conformándose como herramientas fundamentales para esta investigación. El Fotoplano 1 se hace sobre la base de la ciudad del Google Earth diferenciándose las áreas peatonales y las zonas verdes. En el Fotoplano 2, y con el soporte anterior, se distinguen las tipologías persistentes y dominantes como son los grandes ejes peatonales, las redes peatonales locales y los elementos peatonales singulares. Finalmente, a partir de los 2 fotoplanos, se realiza la denominada “Huella peatonal” que destaca por su atractivo y pregnancia, algo de lo que el campo de lo peatonal es muy útil. A través de la huella se obtiene una rápida información al tener el plano dos colores, color naranja para lo peatonal (formado por las áreas peatonales y zonas verdes) y color negro para el resto el resto no peatonal. Toda esta documentación gráfica y descriptiva de los elementos peatonales de cada ciudad, queda ampliamente recogida en el Anexo de la tesis. La “Huella peatonal” se considera como el plano básico en la investigación obteniendo una percepción rápida, clara y visual del espacio peatonal de cada ciudad. Se arroja información morfológica con respecto a la distribución espacial, articulación, equilibrio, modulación, cohesión, concentración peatonal, etc. de cada una de las ciudades seleccionadas. A través de la huella se resuelve muchos de las cuestiones enmarcadas como objetivos de la tesis, comprobándose de forma general, que los elementos peatonales dentro de la trama urbana están desarticulados ya que no hay una estructura que module la ciudad como un conjunto cohesionado. Se localizan pequeñas redes conectadas entre sí, que de forma heterogénea, están dispersas por la ciudad. Se verifica que los elementos peatonales con mayor concentración y presencia en las ciudades analizadas son los ejes peatonales, los cascos históricos y los elementos peatonales en las nuevas áreas residenciales. En la investigación, además de estos 3 elementos mencionados, se analiza con mayor profundidad otros tipos que destacan por su persistencia y repetición en la “Huella peatonal” de cada una de las 22 ciudades, como son las plazas peatonales, los soportales y los elementos singulares peatonales: espacios tradicionales (recintos feriales, pasajes, puentes históricos), nuevos elementos peatonales (pasarelas peatonales, elementos mecánicos de paso), áreas peatonales entorno a edificios culturales y otros casos como los consistentes en la recuperación y transformación de edificaciones y construcciones urbanas de diferente uso y tipología, en nuevas áreas peatonales. Se aporta luz sobre su definición, localización, cronología, proporción, presencia y génesis, facilitando resultados de cada uno de ellos. De forma paralela, se obtiene información de índole cuantitativa a través de las mediciones de la huella, obteniéndose datos y porcentajes de extensión de la ciudad, de las zonas peatonales y de las zonas verdes, de los cascos históricos y de sus superficies peatonales, de los metros lineales de dichos cascos históricos y de sus calles peatonales. Se proporcionan ratios e índices que se consideran fundamentales para una mejor comprensión peatonal de cada urbe. Se establece una clasificación de las ciudades en cada uno de los ámbitos descritos, destacando las ciudades de Pamplona, San Sebastián y Burgos por arrojar las cifras peatonales más positivas encabezando la mayoría de las tablas clasificatorias. La peor ciudad valorada es Alicante, seguida según criterio, de Almería, Palma de Mallorca y Las Palmas de GC. En el capítulo final de la investigación, se eligen las ciudades de Burgos, San Sebastián y Pamplona como casos de estudio representativos. El objetivo es obtener un conocimiento más preciso en cuanto a su origen, cronología y procesos de las peatonalizaciones. Cada ciudad se compone de un cuadro cronológicos por etapas, desarrollándose de forma exhaustiva cada una de ellas, enunciadas normalmente, como instrumentos de planeamiento o proyectos de urbanización, acompañadas de los planos de las actuaciones peatonales. Al final de cada etapa se aportan datos de las cifras de las peatonalizaciones que se van realizando, con un cuadro numérico de localizaciones, superficie peatonal, superficie reurbanizada, longitud peatonal y el grado de peatonalización del casco histórico, además de los datos acumulados por etapa. De las conclusiones cruzadas de estas 3 ciudades, destaca la comprobación de la tendencia de ir peatonalizando los centros antiguos llegando incluso al 100% de calles peatonales en el caso de San Sebastián. No obstante, es difícil confirmar si el objetivo es una peatonalización global de los cascos, ya que son muchas las variables que afectan e influyen en el proceso peatonal de cada ciudad. Se coteja adicionalmente cómo se extiende la cultura peatonal desde el interior al exterior, mas allá de los cascos históricos hacia los ensanches próximos. En cuanto al origen de las peatonalizaciones, se concluye que no hay una concepción inicial y teórica marcada, a partir de la cual se va desarrollando la trama peatonal de cada ciudad. Se puede afirmar que los procesos peatonales ejecutados son variados y de diversa índole, sin poder precisar un hecho como causa principal. Según el momento y las circunstancias, las peatonalizaciones responden a distintas iniciativas promovidas por los comerciantes, por las administraciones locales o por los técnicos de planeamiento, con sus expertas aportaciones en los planes. Estos tres agentes actúan como impulsores de proyectos individuales peatonales que se van solapando en el tiempo. Como punto final de la tesis, se propone una serie de nuevas líneas de investigación que pueden servir como estudio adicional y complementario, respondiendo a aspectos tan relevantes como cuestiones de índole económica, social y de movilidad, fuertemente ligadas a las peatonalizaciones, tal y como se demuestra en la literatura consultada. ABSTRACT This thesis aims to analyse the pedestrian elements dealing with the needs and infrastructures that support pedestrians, as this is a field that is little developed in our country, in comparison to other regions such as Denmark, the United Kingdom, Germany and the Netherlands, where the pedestrian actions implemented are traditional and highly successful. Therefore, even though little research has been done about this topic, this field is increasingly important throughout these years of search for urban models intended to prevent the waste of resources and to develop new mobility ways, more adapted to a limited, vulnerable world. This research is essentially descriptive and it mainly aims to document and systematically analysed a scarcely known reality by providing data in order to understand the origin and development of pedestrian actions. This thesis intends to lay the foundations of this field in Spain, accurately defining the state of the art from a geographical point of view and preparing a full thematic map that may be used in the future. The overall aim is to study and understand the pedestrian elements of a limited number of Spanish medium-size cities, establishing the following specific goals: - To identify and describe the main elements comprising cities' pedestrian networks. - To study of special predominant typologies, their features and origins, with the possibility to, on the one hand, make a difference between the typologies developed in well-established cities, such as the actions in historic quarters, and, on the other hand, those implemented in new cities through generally residential architectural formulae with adjoining pedestrian areas. - To analyse the said elements in order to check whether they have resulted in pedestrian-use networks, whether they have been established by organising the city, such as the linear axes in coastal and riverside cities, or whether they have had an impact on the character of the areas where these elements have been implemented, focusing on pedestrian historic quarters. - Check whether there are actions supplementary to the urban development and urban improvement processes, as well as the approval of financial support and subventions to deal with these actions. - Finally, to describe and assess the processes and procedures by which the pedestrianisation of certain urban areas is carried out, the origins, the instruments and the date of their implementation, providing a pedestrian timeline. The methodology starts by defining 22 Spanish cities, province capitals with a population ranging from 100,000 to 500,000 inhabitants, according to the data recorded by the Spanish Statistics Institute (INE) in 2009. The distribution of coastal, riverside and interior cities, as well as of patrimonial cities and cities in islands, etc. is well balanced. The analysis of the pedestrian elements of these cities is made with the great resolution of the public and private map databases that can be accessed on the Internet, especially using the "street-view" version of tools such as Google Earth and Google Maps, software applications that allow to go for a virtual walk in each city, providing highly precise details about the pedestrian actions. The following cities have been chosen: ‐ 11 coastal cities: Alicante, Almería, Bilbao, Cádiz, Castellón de la Plana, Huelva, Las Palmas de Gran Canaria, Palma de Mallorca, Santander, San Sebastián and Tarragona. ‐ 11 interior cities: Albacete, Burgos, Córdoba, León, Lérida, Logroño, Oviedo, Murcia, Pamplona, Valladolid and Vitoria. Finally, as they have the highest percentages regarding the pedestrian areas found in the historic quarters, 3 cities representing a deep pedestrian development have been chosen: Burgos, San Sebastián and Pamplona. Other significant methodological aspects are the many documents found from online sources, especially when preparing the last chapter: “Processes for the pedestrianisation of Spanish cities”, which focuses on the 3 cities chosen. Local newspaper and periodical libraries, official gazettes, the minutes of plenary sessions of councils and the zoning regulation documents (General Zoning Plans, Special Zoning Plans, Municipal Plans and Projects, Mobility Plans, etc.) have been consulted, obtaining accurate information regarding the timeline and the extension of the works carried out. The methodology is supplemented by interviews with key players in the pedestrianisation process, such as the technical staff in councils and the officers drafting and designing the projects, as well as with the direct collaboration by the officers of the councils of the 3 cities chosen, who provided all the information requested. The thesis introduces the pedestrian elements by studying pedestrian areas and existing pedestrianisation processes through the analysis of the literature consulted, providing valuable information for the definition of pedestrian models and showing a brief history and background of the pedestrianisation process. Remarkable papers published by some European experts in the field, such as Carmen Hass-Klau, Rolf Monheim and Collin Buchanan, are covered in the thesis. In Spain, the pedestrianisation actions were late in time in comparison to the rest of Europe, with at least 40 years of delay. The Spanish literature references in this field are limited. The most significant papers are those published by Alfonso Sanz and by Professor Julio Pozueta, with a special mention of one of his last works "La ciudad paseable" (The Walkable City), which describes the pedestrian elements found in the cities and is used a model and an example for this research. Based on the elements above, pedestrian elements are defined as those construction-free public areas that, due to their features and design, ensure the comfortable, convenient use of the spaces, characterised by pedestrian traffic and specifically reserved for this purpose. The thesis detects and specifies the following pedestrian elements: pedestrian streets and squares, pavements (sidewalks) and boulevards with a width exceeding 8 metres, pedestrian promenades, crossing elements (traditional and mechanical), pedestrian spaces linked to new residential areas, colonnades and pedestrian passages or narrow streets with a minimum width of 4 metres, exhibition sites, free spaces and green areas and parks. For each of the 22 cities chosen, a thorough inventory of the elements mentioned above has been made by using worksheets, providing a significant number of individual projects developed in each city. This information is graphically collected and displayed on 2 photomaps, resulting in tools essential for this research. Photomap 1 is made based on the city displayed by Google Earth, making a difference between pedestrian areas and green areas. On Photomap 2, using the tool mentioned above, a difference can be made between persistent and predominant typologies, such as the big pedestrian axes, the local pedestrian networks and singular pedestrian elements. Finally, the 2 photomaps are used in order to establish the so-called "pedestrian footprint", which is highlighted by its attractiveness and appeal, concepts for which the pedestrian field is very useful. With the pedestrian footprint, quick information can be obtained, since the map shows two colours: orange for pedestrian elements (made up of pedestrian areas and green areas) and black for the other non-pedestrian elements. A significant part of these graphic, descriptive documents about each city's pedestrian elements can be found in the thesis appendix. The "Pedestrian Footprint" is regarded in the research as the basic map, obtaining a quick, clear and visual perception of each city's pedestrian space. This footprint provides morphological information regarding the space distribution, the organisation, the balance, the modulation, the cohesion, the pedestrian concentration, etc. in each of the cities chosen. The pedestrian footprint helps solve many of the questions established as the thesis goals, proving that, in general, the pedestrian elements are not organised in the urban plot, as there is no structure modulating the city as a properly linked set of elements. Small networks linked to each other and heterogeneously scattered all over the city are found. It has been verified that the pedestrian elements with the highest concentration and presence in the cities analysed are the pedestrian axes, the historic quarters and the pedestrian elements found in the new residential areas. Besides these 3 elements mentioned, the research analyses in depth other types that are remarkable due to their persistence and repetition in the "Pedestrian Footprint" of each of the 22 cities, such as the pedestrian squares, the colonnades and the singular pedestrian elements: traditional spaces (exhibition sites, passages, historic bridges), new pedestrian elements (pedestrian footbridges, mechanical crossing elements), pedestrian areas around cultural buildings and other cases such as those consisting of recovering and transforming building and urban constructions, intended for a wide range of purposes and of different types, into new pedestrian areas. This work puts light on the definition, location, timeline, proportion, presence and origin, providing results for each of these concepts. At the same time, quantitative information is obtained by measuring the footprint, getting data and percentages on the size of the city, the pedestrian areas and the green areas, the historic quarters and the pedestrian zones, the linear metres of such historic quarters and pedestrian streets. The footprint also provides ratios and rates that are considered as essential in order to better understand the pedestrian elements of each city. A classification of cities is established for each of the areas described, highlighting the cities of Pamplona, San Sebastián and Burgos, as they provide the most positive pedestrian figures and lead most of the classification tables or rankings. According to the criteria considered, the city with the worst values is Alicante, followed by Almería, Palma de Mallorca and Las Palmas de Gran Canaria. In the final chapter in the thesis, the cities of Burgos, San Sebastián and Pamplona are chosen as representative study cases. The aim is to gain more accurate knowledge regarding the pedestrianisation origin, timeline and processes. Each city comprises a chronological sequence made of stages, each of which is thoroughly developed and usually announced as zoning plans or urban development projects, accompanied by the plans of the pedestrian actions. At the end of each stage, data with the figures of the pedestrianisation projects are provided, including a numerical chart with locations, pedestrian area, redeveloped urban areas, pedestrian length and pedestrianisation degree in the historic quarter, as well as the data cumulated throughout each stage. In the crossed conclusions on the three cities, the trend of gradually pedestrianising the historic quarters (even reaching the 100% of the pedestrian streets as in San Sebastián) is verified. However, it is difficult to confirm whether the purpose is to reach an overall pedestrianisation of the historic quarters, since there are many variables that affect and influence each city's pedestrianisation process. In addition, the spread of the pedestrian culture from the internal areas to the external areas, beyond the historic quarters to the nearby expansion areas, is compared. Regarding the origin of pedestrianisations, the thesis comes to the conclusion that there is no initial or theoretical conception from which each city's pedestrian plot is developed. The pedestrian processes implemented are varied and diverse but no fact can be specified as the main cause. Based on the moment and circumstances, the pedestrianisation processes are due to different initiatives promoted by shopkeepers, by the local administrations or by the zoning officers, with their expert contributions to the plans. These three players promote and drive individual pedestrianisation projects that overlap in the course of time. Finally, new lines of research are put forwards, as they can be taken as an additional study and as a supplement to this research, dealing with aspects as significant as the economic, social and mobility factors, closely linked to the pedestrianisation processes, as proven in the literature consulted.

Simulation based knowledge elicitation:effect of visual representation and model parameters

Since much knowledge is tacit, eliciting knowledge is a common bottleneck during the development of knowledge-based systems. Visual interactive simulation (VIS) has been proposed as a means for eliciting experts’ decision-making by getting them to interact with a visual simulation of the real system in which they work. In order to explore the effectiveness and efficiency of VIS based knowledge elicitation, an experiment has been carried out with decision-makers in a Ford Motor Company engine assembly plant. The model properties under investigation were the level of visual representation (2-dimensional, 2½-dimensional and 3-dimensional) and the model parameter settings (unadjusted and adjusted to represent more uncommon and extreme situations). The conclusion from the experiment is that using a 2-dimensional representation with adjusted parameter settings provides the better simulation-based means for eliciting knowledge, at least for the case modelled.

Development and Testing of An Automatic Lung IMRT Planning Algorithm

Knowledge-based radiation treatment is an emerging concept in radiotherapy. It

mainly refers to the technique that can guide or automate treatment planning in

clinic by learning from prior knowledge. Dierent models are developed to realize

it, one of which is proposed by Yuan et al. at Duke for lung IMRT planning. This

model can automatically determine both beam conguration and optimization ob-

jectives with non-coplanar beams based on patient-specic anatomical information.

Although plans automatically generated by this model demonstrate equivalent or

better dosimetric quality compared to clinical approved plans, its validity and gener-

ality are limited due to the empirical assignment to a coecient called angle spread

constraint dened in the beam eciency index used for beam ranking. To eliminate

these limitations, a systematic study on this coecient is needed to acquire evidences

for its optimal value.

To achieve this purpose, eleven lung cancer patients with complex tumor shape

with non-coplanar beams adopted in clinical approved plans were retrospectively

studied in the frame of the automatic lung IMRT treatment algorithm. The primary

and boost plans used in three patients were treated as dierent cases due to the

dierent target size and shape. A total of 14 lung cases, thus, were re-planned using

the knowledge-based automatic lung IMRT planning algorithm by varying angle

spread constraint from 0 to 1 with increment of 0.2. A modied beam angle eciency

index used for navigate the beam selection was adopted. Great eorts were made to assure the quality of plans associated to every angle spread constraint as good

as possible. Important dosimetric parameters for PTV and OARs, quantitatively

re

ecting the plan quality, were extracted from the DVHs and analyzed as a function

of angle spread constraint for each case. Comparisons of these parameters between

clinical plans and model-based plans were evaluated by two-sampled Students t-tests,

and regression analysis on a composite index built on the percentage errors between

dosimetric parameters in the model-based plans and those in the clinical plans as a

function of angle spread constraint was performed.

Results show that model-based plans generally have equivalent or better quality

than clinical approved plans, qualitatively and quantitatively. All dosimetric param-

eters except those for lungs in the automatically generated plans are statistically

better or comparable to those in the clinical plans. On average, more than 15% re-

duction on conformity index and homogeneity index for PTV and V40, V60 for heart

while an 8% and 3% increase on V5, V20 for lungs, respectively, are observed. The

intra-plan comparison among model-based plans demonstrates that plan quality does

not change much with angle spread constraint larger than 0.4. Further examination

on the variation curve of the composite index as a function of angle spread constraint

shows that 0.6 is the optimal value that can result in statistically the best achievable

plans.

The contribution of community enterprise to British urban regeneration in a period of state retrenchment

This chapter discusses the growth and nature of community enterprise and in particular the sub-set of asset-based community development trusts and reviews their contribution to urban regeneration in Britain. Three models are presented and illustrated with case studies.

Methods, Models & Systems for Dealing with Some Business, Management & Engineering Problems

This keynote presentation will report some of our research work and experience on the development and applications of relevant methods, models, systems and simulation techniques in support of different types and various levels of decision making for business, management and engineering. In particular, the following topics will be covered. Modelling, multi-agent-based simulation and analysis of the allocation management of carbon dioxide emission permits in China (Nanfeng Liu & Shuliang Li Agent-based simulation of the dynamic evolution of enterprise carbon assets (Yin Zeng & Shuliang Li) A framework & system for extracting and representing project knowledge contexts using topic models and dynamic knowledge maps: a big data perspective (Jin Xu, Zheng Li, Shuliang Li & Yanyan Zhang) Open innovation: intelligent model, social media & complex adaptive system simulation (Shuliang Li & Jim Zheng Li) A framework, model and software prototype for modelling and simulation for deshopping behaviour and how companies respond (Shawkat Rahman & Shuliang Li) Integrating multiple agents, simulation, knowledge bases and fuzzy logic for international marketing decision making (Shuliang Li & Jim Zheng Li) A Web-based hybrid intelligent system for combined conventional, digital, mobile, social media and mobile marketing strategy formulation (Shuliang Li & Jim Zheng Li) A hybrid intelligent model for Web & social media dynamics, and evolutionary and adaptive branding (Shuliang Li) A hybrid paradigm for modelling, simulation and analysis of brand virality in social media (Shuliang Li & Jim Zheng Li) Network configuration management: attack paradigms and architectures for computer network survivability (Tero Karvinen & Shuliang Li)

Adaptability, Transformation and Complex Changes in Namibia and Tanzania: Resilience and Innovation System Development in Local Communities

This thesis is a research about the recent complex spatial changes in Namibia and Tanzania and local communities’ capacity to cope with, adapt to and transform the unpredictability engaged to these processes. I scrutinise the concept of resilience and its potential application to explaining the development of local communities in Southern Africa when facing various social, economic and environmental changes. My research is based on three distinct but overlapping research questions: what are the main spatial changes and their impact on the study areas in Namibia and Tanzania? What are the adaptation, transformation and resilience processes of the studied local communities in Namibia and Tanzania? How are innovation systems developed, and what is their impact on the resilience of the studied local communities in Namibia and Tanzania? I use four ethnographic case studies concerning environmental change, global tourism and innovation system development in Namibia and Tanzania, as well as mixed-methodological approaches, to study these issues. The results of my empirical investigation demonstrate that the spatial changes in the localities within Namibia and Tanzania are unique, loose assemblages, a result of the complex, multisided, relational and evolutional development of human and non-human elements that do not necessarily have linear causalities. Several changes co-exist and are interconnected though uncertain and unstructured and, together with the multiple stressors related to poverty, have made communities more vulnerable to different changes. The communities’ adaptation and transformation measures have been mostly reactive, based on contingency and post hoc learning. Despite various anticipation techniques, coping measures, adaptive learning and self-organisation processes occurring in the localities, the local communities are constrained by their uneven power relationships within the larger assemblages. Thus, communities’ own opportunities to increase their resilience are limited without changing the relations in these multiform entities. Therefore, larger cooperation models are needed, like an innovation system, based on the interactions of different actors to foster cooperation, which require collaboration among and input from a diverse set of stakeholders to combine different sources of knowledge, innovation and learning. Accordingly, both Namibia and Tanzania are developing an innovation system as their key policy to foster transformation towards knowledge-based societies. Finally, the development of an innovation system needs novel bottom-up approaches to increase the resilience of local communities and embed it into local communities. Therefore, innovation policies in Namibia have emphasised the role of indigenous knowledge, and Tanzania has established the Living Lab network.

Greening the city: an ecosystem-based framework to support planning towards urban sustainability and resilience

Cities are small-scale complex socio-ecological systems, that host around 60% of world population. Ecosystem Services (ES) provided by urban ecosystems offer multiple benefits necessary to cope with present and future urban challenges. These ES include microclimate regulation, runoff control, as well as opportunities for mental and physical recreation, affecting citizen’s health and wellbeing. Creating a balance between urban development, land take containment, climate adaptation and availability of Urban Green Areas and their related benefits, can improve the quality of the lives of the inhabitants, the economic performance of the city and the social justice and cohesion aspects. This work starts analysing current literature around the topic of Ecosystem Services (ES), Green and Blue Infrastructure (GBI) and Nature-based Solutions (NBS) and their integration within current European and International sustainability policies. Then, the thesis focuses on the role of ES, GBI and NBS towards urban sustainability and resilience setting the basis to build the core methodological and conceptual approach of this work. The developed ES-based conceptual approach provides guidance on how to map and assess ES, to better inform policy making and to give the proper value to ES within urban context. The proposed interdisciplinary approach navigates the topic of mapping and assessing ES benefits in terms of regulatory services, with a focus on climate mitigation and adaptation, and cultural services, to enhance wellbeing and justice in urban areas. Last, this thesis proposes a trans-disciplinary and participatory approach to build resilience over time around all relevant urban ES. The two case studies that will be presented in this dissertation, the city of Bologna and the city of Barcelona, have been used to implement, tailor and test the proposed conceptual framework, raising valuable inputs for planning, policies and science.

Democracy on the edge: limits and possibilities for the implementation of an urban reform agenda in Brazil

In Brazil the 1990s constituted years of institutional achievements in the fields of housing and urban rights, given the incorporation of the principles of the social function of cities and property, the recognition of tenure rights for slum dwellers and the direct participation of citizens in the decision making process of urban policies, within the 1988 Constitution. These proposals have become the pillars of the Urban Reform agenda which has penetrated the federal government apparatus since the creation of the Ministry of Cities under Lula's administration. The article evaluates the limits and possibilities for the implementation of this agenda through the analysis of two policies proposed by the Ministry: the National Council of Cities and the campaign for Participatory Master Plans. The approach is based on the organization of the Brazilian State in terms of urban development, the relationship with the political system and the characteristics of Brazilian democracy.

Recent advances in our knowledge of the Myxozoa

In the last few years two factors have helped to significantly advance our understanding of the Myxozoa. First, the phenomenal increase in fin fish aquaculture in the 1990s has lead to the increased importance of these parasites; in rum this has lead to intensified research efforts, which have increased knowledge of the development, diagnosis, and pathogenesis of myxozoans. The hallmark discovery in the 1980s that the life cycle of Myxobolus cerebralis requires development of an actinosporean stage in the Oligochaete. Tubifex tubifex, led to the elucidation of the life cycles of several other myxozoans. Also, the life cycle and taxonomy of the enigmatic PKX myxozoan has been resolved: it is the alternate stage of the unusual myxozoan. Tetracapsula bryosalmonae, from bryozoans. The 18S rDNA gene of many species has been sequenced, and here we add 22 new sequences to the data set. Phylogenetic analyses using all these sequences indicate that: 1) the Myxozoa are closely related to Cnidaria (also supported by morphological data), 2) marine taxa at the genus level branch separately from genera that usually infect freshwater fishes; 3) taxa cluster more by development and tissue location than by spore morphology; 4) the tetracapsulids branched off early in myxozoan evolution, perhaps reflected by their having bryozoan. rather than annelid hosts; 5) the morphology of actinosporeans offers little information for determining their myxosporean counterparts (assuming that they exist), and 6) the marine actinosporeans from Australia appear to form a clade within the platysporinid myxosporeans. Ribosomal DNA sequences have also enabled development of diagnostic tests for myxozoans. PCR and in situ hybridisation tests based on rDNA sequences have been developed for Myxobolus cerebralis. Ceratomyxa shasta. Kudoa spp,, and Tetracapsula bryosalmonae (PKX). Lectin-based and antibody tests have also been developed for certain myxozoans, such as PKX and C. shasta. We also review important diseases caused by myxozoans. which are emerging or re-emerging. Epizootics of whirling disease in wild rainbow trout (Oncorhynchus mykiss) have recently been reported throughout the Rocky Mountain states of the USA. With a dramatic increase in aquaculture of fishes using marine netpens, several marine myxozoans have been recognized or elevated in status as pathological agents. Kudoa thyrsites infections have caused severe post-harvest myoliquefaction in pen-reared Atlantic salmon (Salmo salar), and Ceratomyxa spp., Sphaerospora spp., and Myxidium leei cause disease in pen-reared sea bass (Dicentrarchus labrax) and sea bream species (family Sparidae) in Mediterranean countries.

TINSEL – a web-based intelligent tutoring system on electrical installation design

This paper presents a project consisting on the development of an Intelligent Tutoring System, for training and support concerning the development of electrical installation projects to be used by electrical engineers, technicians and students. One of the major goals of this project is to devise a teaching model based on Intelligent Tutoring techniques, considering not only academic knowledge but also other types of more empirical knowledge, able to achieve successfully the training of electrical installation design.