Effect of feeding frequency on the growth of common carp (Cyprinus carpio L.) fry

A laboratory-feeding trail was conducted for 45 days with fry of common carp Cyprinus carpio L. (0.45±0.03g) in aquaria in a static indoor fish rearing system. The fry were fed on a pelleted diet containing 33% crude protein having fishmeal as major protein source. The fish fry in five treatments A, B, C, D, and E, each with two replicates were fed on 5% daily ration divided into different feeding frequencies of 2, 3, 4, 5 and 6 times a day respectively in order to observe the growth performance. Each replicate contained 15 fry having total initial weight of 6.87±0.31g. At the end of the feeding trial, significantly different and higher (p<0.05) growth response was observed in treatment C having a feeding frequencies of 4 times a day. Significantly the highest and the lowest percent growth of 334.30 and 218.91% were observed in fish fed on the diet (Treatment C) with 4 times and (Treatment A) 2 times feeding frequencies per day, respectively. Food conversion ratio (FCR) of 1.78 was significantly higher (pfeeding frequencies whereas, the least value of 1.22 was obtained in fish fed on the diet with 4 times daily feeding. Protein efficiency ratio (PER) ranged from 1.68 in fish in treatment A having a feeding frequencies of 2 times per day to 2.48 in fish in treatment C fed on the diet with 4 times feeding frequencies. Other growth parameters viz, specific growth rate (SGR), apparent protein digestibility (ADP) were also higher in treatment C than the other treatments. The results of the present study demonstrated that the growth performance of C. carpio was the best at 4 times feeding in a day using 33% dietary protein containing fish meal as major protein source.

Effect of stocking density on the production of common carp (Cyprinus carpio Lin.) in cages at Kaptai lake, Bangladesh

Growth, survival and food conversion ratio (FCR) of Cyprinus carpio in cages at different stocking density were studied in Kaptai lake. Fingerlings of common carp (12.47 ± 4.29 g) were stocked at 25/m2 , 50/m2 and 75/m2 each with replication in six floating net cages each of Sm x Sm x 4m and reared for 240 days. The growth rate was inversely related to the stocking density with the mean weights of 325.5 ± 11.74 g, 268.99± 8.44 g and 167.0 ± 11.66 g at low, medium and high densities, respectively. At harvest, standing crop biomass averaged 7 .82, 12.83 and 11.58 kg with the survival of 98.9%, 97.6% and 94.4% and food conversion ratios of 4.51, 3.82 and 4.21 for the above three densities, respectively. Weight gain and production at density 25 fish/m 2 were significantly different (p< 0.01) from other two densities. Water quality was not affected in the cages having different stocking densities.

Influence of formulated diets with varying protein levels on growth and ammonia excretion in the fry of Indian major carp, Cirrhina mrigala

The influence of formulated isocaloric diets of different protein levels (30, 35, 40, 45 and 50%) on the growth and ammonia excretion of the Indian major carp Cirrhina mrigala fry was studied for a rearing period of four weeks in the laboratory. Fishmeal, groundnut oilcake and silkworm pupae formed the source of protein in all the diets. As the dietary protein level increased from 30 to 40%, the growth and conversion efficiency increased significantly. Further increase in the protein level resulted in decrease in growth and conversion efficiency. Growth rate, weight gain (%), and gross and net feed conversion efficiencies were maximum at 40% dietary protein level. Ammonia excretion was directly proportional to the level of protein in the diet.

The effect of various protein levels on the growth and survival rates of Penaeus monodon Fabricius

Postlarvae of tiger prawns, P. monodon , were fed with various protein levels of 0; 30; 40 and 50%, fish meal and rice bran were combined and pelletized for 16 wks. Prawns used had an average mean length of 1.2 mm and an average mean weight of 5.5 mg. Nitrite, ammonia, dissolved oxygen content, temperature and pH were monitored. After one month of feeding, growth increments of postlarvae fed with 30% protein diet were significantly different from those given 0; 40 and 50%. Survival rate of the group fed 40% protein was higher (81.7%) but was not significantly different from those fed 30% (68.0%). The highest feed efficiency was obtained from the 30% protein pellets (4.6). At the end of 16 weeks, growth increment of 40% protein level was significantly different from the 30% and 50% protein levels, but the survival rate was not signficantly different from the 30% protein level. Feed conversion for the 40% protein diet was 2.8.

A preliminary study on the protein requirement of Chanos chanos (Forskal) fry in a controlled environment

Growth rate of fish appeared to be related to the levels of the protein in the diet up to 40%. Fish fed diets containing 50 and 60% grew slower than those fed 40%, and the optimum level appears to be 40% when fed to fry at a rate of 10% of body weight. Best feed conversion of 1.96 was also obtained from the 40% protein diet. Mean survival rates were low in all treatments, but highest for the 40% protein diet. The competition of 5 isocaloric experimental diets containing various levels of protein are tabulated, as are weight gains, diet conversions and survival rates for milkfish fry fed various dietary levels of protein. Growth curves for milkfish fry are shown, and the relationship between weight gains of milkfish fry and the dietary levels of protein are illustrated.

Culture of the mud crab, Scylla serrata (Forskal) at different stocking densities in brackishwater ponds

The mean weight percentage survival, relative growth increment, net production and feed conversion value of S. serrata stocked in monoculture at different stocking densities are presented.

Dietary crude protein requirement of Tilapia nilotica fry

To determine growth and survival of Tilapia nilotica fry fed formulated practical dry diets with varying crude protein levels, fish were subjected to 3 seperate feeding trials. Isocaloric practical diets containing 20, 25, 30 and 35% crude protein were fed to fry at 15% fish biomass daily for 7 weeks in 2 trials and another set containing 20, 25, 30, 35, 40, 45 and 50% was given for 8 weeks. On the basis of growth, survival and feed conversion, T. nilotica fry required 35% crude protein in the practical diets given at 15% fish biomass.

The effect of various protein levels on the growth and survival rates of Penaeus monodon Fabricius

Postlarvae of tiger prawns, P. monodon, were fed with various protein levels of 0; 30; 40 and 50%, fish meal and rice bran were combined and pelletized for 16 wks. Prawns used had an average mean length of 1.2 mm and an average mean weight of 5.5 mg. Nitrite, ammonia, dissolved oxygen content, temperature and pH were monitored. After one month of feeding, growth increments of postlarvae fed with 30% protein diet were significantly different from those given 0; 40 and 50%. Survival rate of the group fed 40% protein was higher (81.7%) but was not significantly different from those fed 30% (68.0%). The highest feed efficiency was obtained from the 30% protein pellets (4.6). At the end of 16 weeks, growth increment of 40% protein level was significantly different from the 30% and 50% protein levels, but the survival rate was not significantly different from the 30% protein level. Feed conversion for the 40% protein diet was 2.8.

Effect of chitin and prawn shell on the growth of albino rat

The effect of addition of pure chitin from prawn shell, deproteinised prawn shell, demineralized prawn shell and dry prawn shell in casein based control diet on albino rats was studied. The diets contained 0.5% chitin and 10% protein. The results obtained in the studies show that the weight gain and feed conversion were maximum in the control diet. While addition of pure chitin slightly brought down the weight gain, addition of deproteinsed prawn shell have the minimum weight gain showing that presence of minerals adversely affects both feed consumption and weight gain in the case of albino rats. Although it was reported that addition of pure chitin at 0.5% in the commercial feed of broiler chicken gave increased weight, in the case of albino rats the weight gain was slightly reduced compared to control diet.

Effects of socking [sic] density on ammonia excretion and the growth of Nile tilapia (Oreochromis niloticus L.)

The effects of stocking density (10, 15, 50 & 75 fish in 65L tank) and ammonia excretion on the growth of Nile tilapia, Oreochromis niloticus (12.19 ± 1.21 g) were investigated. Increasing stocking density of Nile tilapia from 15 fish/tank (2.81 g fish/L) to 75 fish/tank (14.07 g fish/L) resulted in associated increase in ammonia level (1.48 ± 0.87 mg/L to 26.44 ± 11.4 mg/L) and significantly lower growth rates. Significantly better feed conversion ratios were found for fish reared at lower (15 fish/tank) stocking densities compared to higher (75 fish/tank) stocking densities. Individual growth rates were significantly better for fish reared at a lower stocking density 15 fish/tank compared to higher stocking density 75 fish/tank and size variation (coefficient of variation in weight) were positively correlated with stocking density. Although water exchange did not have a significant effect on the growth of Nile tilapia for fish stocked at 10 fish/tank (1.88 g fish/L) and 50 fish/tank (9.38 g fish/L), however, the fish in the higher stocking density (9.38 g fish/L) groups and without water exchange, significantly changed the coloration of their bodies (silver to black) which may be due to the lower oxygen levels combined with higher ammonia levels. Ammonia level increased with increasing stocking density and without water exchange. In this study, it may be suggested that when fish reared at higher stocking densities then water exchange must be taken in to consideration so as to help avoid environmental and physiological stress to the fish.

Effects of dietary supplementation of commercial human probiotic and antibiotic on the growth rate and content of intestinal microflora in ornamental fishes

The effects of dietary supplementation of commercial human probiotic, Lactobacil and antibiotic, oxytetracycline on the growth, survival, disease resistance and content of intestinal microflora in two ornamental fishes, viz., goldfish, Carassius auratus and swordtail, Xiphophorus helleri were studied. The total wet weight gain, food conversion ratio and specific growth rate of C. auratus did not vary significantly (p>0.05) among treatments. While in X. helleri, significant differences existed in the total wet weight gain, survival, food conversion ratio and specific growth rate among treatment groups (p<0.05). The counts of antibiotic resistant bacteria in fish gut increased with days of culture in all the treatments and the increase was more in antibiotic fed fishes. A reduction in the development of antibiotic resistance among the bacterial flora of fish gut was noticed in probiotic fed groups of C auratus and X. helleri. The results of the present study revealed that the effects of human probiotic on the growth, survival and disease resistance of ornamental fishes are variable and difficult to reproduce the similar effect on different species.

Effects of stocking density on growth and production of GIFT (Oreochromis niloticus)

The study was carried out to assess the effects of stocking density on growth and production of GIFT for a period of 100 days. Three stocking densities were used 150, 200 and 250 fish/decimal; designated as treatment T1, T2 and T3 respectively having two replicates for each. Commercial pellet feeds were fed at the rate of 30% body weight up to first 10 days and then gradually it was readjusted to 22%, 18%, 15%, 12%, 10%, 8%, 6%, 5% and 4% respectively after every 10 days interval. The result showed that the fish in the treatment T1 stocked with the lowest stocking density (150 fish/dec) resulted in best individual weight gain (148.65g) followed by those in treatment T2 and T3 respectively. The specific growth rates (SGR) at every 10 days were ranged from 6.59 to 1.11 in different treatments during the experimental period. The food conversion ratio (FCR) values ranged between 1.82 to 2.03 with treatment T1 showing the lowest FCR. The survival rate ranged between 84 to 92%. Treatment T1 and treatment T2 showed significantly higher survival than Treatment T3. The fish production rate in treatment T1, T2 and T3 were 18.58, 23.87 and 26.78 kg/decimal respectively.

Interactions of dietary levels of protein and energy on rainbow trout (Oncorhynchus mykiss) in desert brackish water

A 3x3 factorial experiment was conducted to determine the optimum protein to energy (P/E) ratio for rainbow trout in brackish water. Three crud protein levels and three energy levels at each protein level were utilized. Diets were made in semi-purified that in all of them fish meal, casein and gelatin as the sources of protein and dextrin, starch and oil as the sources of energy were used. Each of experimental diets was fed to triplicate groups of 20 fish with an average individual weight of 81.5 g in 9 2000-1 flow trough fiberglass tanks. During this experiment water temperature, dissolved oxygen, PH and EC were 15±2°C, 6.5-8.1 mg/1, 7.7-8.6 and 25400 grills respectively. The diets were fed at a rate between 1.6-2 wet body weight% per day depended to water temperature in three equal rations and adjusted two weekly for 84 days. At each of protein levels, weight gain percent (%WG), average daily growth percent (%ADG), protein efficiency ratio (PER), apparent net protein utilization percent (%ANPU), or percent of protein deposited, specific growth rate (SGR) and condition factor (CF) were found to increase and food conversion ratio (FCR) was found to decrease with an increasing energy levels from 370 to 430 Kcal/100g. Fish fed a 35% protein, 430 Kcal/100g energy diet with a P/E ratio of 81.4 mg protein/ Kcal PFV energy, attained the best growth performance. Fat and moisture of carcass were affected by protein and energy levels of test diets while protein and ash of carcass were relatively constant in different treatments.

BWR fuel design options for self-sustainable Th-233U fuel cycle

In this work, we investigate a number of fuel assembly design options for a BWR core operating in a closed self-sustainable Th-233U fuel cycle. The designs rely on axially heterogeneous fuel assembly structure in order to improve fertile to fissile conversion ratio. One of the main assumptions of the current study was to restrict the fuel assembly geometry to a single axial fissile zone "sandwiched" between two fertile blanket zones. The main objective was to study the effect of the most important design parameters, such as dimensions of fissile and fertile zones and average void fraction, on the net breeding of 233U. The main design challenge in this respect is that the fuel breeding potential is at odds with axial power peaking and therefore limits the maximum achievable core power rating. The calculations were performed with BGCore system, which consists of MCNP code coupled with fuel depletion and thermo-hydraulic feedback modules. A single 3-dimensional fuel assembly with reflective radial boundaries was modeled applying simplified restrictions on maximum central line fuel temperature and Critical Power Ratio. It was found that axially heterogeneous fuel assembly design with single fissile zone can potentially achieve net breeding. In this case however, the achievable core power density is roughly one third of the reference BWR core.

Decay heat in fast reactors with transuranic fuels

In this work, we performed an evaluation of decay heat power of advanced, fast spectrum, lead and molten salt-cooled reactors, with flexible conversion ratio. The decay heat power was calculated using the BGCore computer code, which explicitly tracks over 1700 isotopes in the fuel throughout its burnup and subsequent decay. In the first stage, the capability of the BGCore code to accurately predict the decay heat power was verified by performing a benchmark calculation for a typical UO2 fuel in a Pressurized Water Reactor environment against the (ANSI/ANS-5.1-2005, "Decay Heat Power in Light Water Reactors," American National Standard) standard. Very good agreement (within 5%) between the two methods was obtained. Once BGCore calculation capabilities were verified, we calculated decay power for fast reactors with different coolants and conversion ratios, for which no standard procedure is currently available. Notable differences were observed for the decay power of the advanced reactor as compared with the conventional UO2 LWR. The importance of the observed differences was demonstrated by performing a simulation of a Station Blackout transient with the RELAP5 computer code for a lead-cooled fast reactor. The simulation was performed twice: using the code-default ANS-79 decay heat curve and using the curve calculated specifically for the studied core by BGCore code. The differences in the decay heat power resulted in failure to meet maximum cladding temperature limit criteria by ∼100 °C in the latter case, while in the transient simulation with the ANS-79 decay heat curve, all safety limits were satisfied. The results of this study show that the design of new reactor safety systems must be based on decay power curves specific to each individual case in order to assure the desired performance of these systems. © 2009 Elsevier B.V. All rights reserved.