Study of carbon nanotube film and shape memory alloys treatment for sensing and structural vibration control

Structural vibration control is of great importance. Current active and passive vibration control strategies usually employ individual elements to fulfill this task, such as viscoelastic patches for providing damping, transducers for picking up signals and actuators for inputting actuating forces. The goal of this dissertation work is to design, manufacture, investigate and apply a new type of multifunctional composite material for structural vibration control. This new composite, which is based on multi-walled carbon nanotube (MWCNT) film, is potentially to function as free layer damping treatment and strain sensor simultaneously. That is, the new material integrates the transducer and the damping patch into one element. The multifunctional composite was prepared by sandwiching the MWCNT film between two adhesive layers. Static sensing test indicated that the MWCNT film sensor resistance changes almost linearly with the applied load. Sensor sensitivity factors were comparable to those of the foil strain gauges. Dynamic test indicated that the MWCNT film sensor can outperform the foil strain gage in high frequency ranges. Temperature test indicated the MWCNT sensor had good temperature stability over the range of 237 K-363 K. The Young’s modulus and shear modulus of the MWCNT film composite were acquired by nanoindentation test and direct shear test, respectively. A free vibration damping test indicated that the MWCNT composite sensor can also provide good damping without adding excessive weight to the base structure. A new model for sandwich structural vibration control was then proposed. In this new configuration, a cantilever beam covered with MWCNT composite on top and one layer of shape memory alloy (SMA) on the bottom was used to illustrate this concept. The MWCNT composite simultaneously serves as free layer damping and strain sensor, and the SMA acts as actuator. Simple on-off controller was designed for controlling the temperature of the SMA so as to control the SMA recovery stress as input and the system stiffness. Both free and forced vibrations were analyzed. Simulation work showed that this new configuration for sandwich structural vibration control was successful especially for low frequency system.

Comportamento geotécnico de misturas de solo e resíduos de perfuração onshore

The drilling of wells for petroleum extraction generates rocks and soils fragments, among other residues. These fragments are denominated petroleum drilling gravel or simply petroleum drilling residue. On the sites of onshore exploration are formed big deposits of drilling gravel, an expensive final destination material. This work aims at evaluating the addition of drilling residue to a lateritic soil, as composite material, for construction of compacted fills for earth work projects. Soil and residue were evaluated by X-ray diffraction (XRD) and X-ray fluorescence (XRF) and by laboratory tests traditionally used in soil mechanics, as particle-size analysis of soils, determination of liquid and plasticity indexes and compaction test. After soil and residue characterization, soil-residue mixtures were studied, using dosages of 2,5%, 5%, 10%, and 15% of residue in relation to the dry soil mass. These mixtures were submitted to compaction test, CBR, direct shear test and consolidation test. The test results were compared to the current legislation of DNIT for compacted fill construction. The results showed that the mixtures presented the minimal necessary parameters, allowing, from the point of view of geotechnical analysis, the use of these mixtures for construction of compacted fills

Antimicrobial and bond strength properties of a dental adhesive containing zinc oxide nanoparticles

Aim: To assess the effect of adding zinc oxide nanoparticles to dental adhesives on their anti-microbial and bond strength properties. Methods: 45 human premolars were cut at the cement enamel junction (CEJ) and the crowns were sliced into buccal and lingual halves. The specimens were classified into three groups, etched with 37% phosphoric acid for 15 s and rinsed for 30 s. Single Bond, Single Bond+5% zinc oxide and Single Bond+10% zinc oxide were used in the first, second and third groups. A cylinder of Z250 composite was bonded and cured for 40 s. For anti-bacterial testing, 10 samples of each group were assessed by direct contact test; 10 μL of bacterial suspension was transferred into tubes containing adhesives and incubated for one hour; 300 μL of brain heart infusion (BHI) broth was added to each tube and after 12 h, 50 μL of bacteria and broth were spread on blood agar plates and incubated for 24 h. Results: The colony count decreased significantly in the second and third groups compared to the first. Conclusions: Incorporation of zinc oxide nanoparticles into dental adhesives increases their anti-microbial properties without affecting their bond strength.

PREVALENCE, ISOLATION, AND GENETIC CHARACTERIZATION OF TOXOPLASMA GONDII IN CHICKEN

Toxoplasma gondii (T. gondii) is one of the most successful parasites in the world because of its capability of infecting all warm-blooded animals. It has been reported that up to one third of the world population is infected with this parasite. Chickens are recognized as good indicators of the environmental T. gondii oocysts contamination because they obtain food from the ground. Thus, the prevalence of T. gondii in chicken provides more insight related to public health concern from T. gondii. Previous studies have shown a high isolation rate from free-range chickens raised in the United States. The objectives of this study were to evaluate the microbial safety and infection of T. gondii in free-range chickens available at the grocery stores and farms for the consumers to purchase and genotype T. gondii isolates. Chicken hearts were obtained from the local markets and also from the farms raising free- range chickens. Heart juice was obtained from cavities of each heart. Modified agglutination test (MAT) for detection of IgG antibodies was conducted with those heart juice samples with titer of 1:5, 1:25, and 1: 100. Each seropositive heart was pepsin digested and bioassayed into a group of two mice. Six weeks post inoculation (p.i.) mice were bled and euthanized to examine the infection of T. gondii. In addition, multiplex multilocus nested PCR-RFLP was performed to genetically characterize T. gondii isolates with eleven PCR-RFLP markers including SAG1, SAG2, altSAT2, SAG3, BTUB, GRA6, c22-8, c29-a, L358, PK1, and Apico. One hundred fifty from a total of 997 samples (15.0%) were found seropositive for T. gondii. No viable T. gondii was isolated from chicken hearts that were sampled. A total of four genotypes were identified, including one new genotype and three previously identified genotypes. The results suggest that T. gondii oocysts could present in the environment and infect the food animals. T. gondii prevalence in chicken hearts could reflect the environmental contamination of T. gondii and prevalence information can be used to manage T. gondii infection risk.

Serological evidence of Toxoplasma gondii in hunted wild boar from Portugal

Toxoplasmosis is an important parasitic zoonosis with a worldwide distribution, being the parasitic disease with the highest occurrence in Europe. Wild boar has an important role in the epidemiological cycle of Toxoplasma gondii as an intermediate host, that can potentially infect humans when the meat is consumed raw or undercooked. The purpose of this work was to determine the presence of antibodies to T. gondii in serum of hunted wild boar. During the hunting season 2011/2012, sera samples were collected from 97 wild boar and tested for IgG antibodies to T. gondii, using the modified agglutination test. Twenty out of the 97 wild boar (20.6%) were seropositive for T. gondii IgG antibodies. Multivariate logistic regression analysis showed that males and older animals were associated with T. gondii seropositivity. These results show that T. gondii has an important presence in wild boar population from Portugal, suggesting a potential zoonotic risk for humans when wild boar meat or meat products are consumed raw or undercooked.

Toxoplasma gondii Infection in Hunted Wild Boars (Sus scrofa): Heart Meat Juice as an Alternative Sample to Serum for the Detection of Antibodies

Toxoplasmosis is a global zoonosis caused by the protozoan parasite Toxoplasma gondii. Detection of antibodies to T. gondii in serum samples from hunted animals may represent a key step for public health protection. It is also important to assess the circulation of this parasite in wild boar population. However, in hunted animals, collection of blood is not feasible and meat juice may represent an alternative sample. The purpose of the present study was to evaluate heart meat juice of hunted wild boars as an alternative sample for post-mortem detection of antibodies to T. gondii by modified agglutination test (MAT). The agreement beyond chance between results from meat juice assessed with Cohen’s kappa coefficient revealed that the 1:20 meat juice dilution provided the highest agreement. McNemars’s test further revealed 1:10 as the most suitable meat juice dilution, as the proportion of positive paired samples (serum and meat juice from the same animal) did not differ at this dilution. All together, these results suggest a reasonable accuracy of heart meat juice to detect antibodies to T. gondii by MAT and support it as an alternative sample in post-mortem analysis in hunted wild boars.

Influence de la taille et de la gradation des particules sur la résistance au cisaillement et le comportement dilatant des matériaux granulaires

Résumé : Cette étude examine l'impact de la taille et de la gradation de particules sur les corrélations théoriques et empiriques existantes les plus connues entre la résistance au cisaillement et le comportement dilatatant des matériaux granulaires en condition de déformation plane et en compression triaxiale drainée. À cette fin, 276 tests de cisaillements symétriques directs et 35 tests de compressions triaxiales drainées ont été menés sur des échantillons composés de billes de basalte (particules rondes), et de sables constitués de particules angulaires (sable de Péribonka et sable d'Eastmain) sur une échelle de 63 µm à 2000 µm afin d'évaluer leur résistance au cisaillement et leur comportement de dilatance sur une vaste échelle de pressions normales et de densités relatives initiales. Premièrement, la fiabilité et l'applicabilité des limites de mesure à l’aide de tests physiques de cisaillements symétriques directs dans l'interprétation de la résistance au cisaillement frictionnel en déformation plane des matériaux granulaires ont été discutées et confirmées par l'usage du code informatique DEM, SiGran. L'accent a été particulièrement mis sur la validation du modèle DEM au moyen de comparaison des résultats des simulations DEM avec leurs équivalents physiques à une échelle macro. Les résultats virtuels DSA sont abordés du point de vue de la coaxialité entre les principales tensions et les principales directions des paliers de pression ainsi que de la déviation de la direction d'extension nulle à partir de la direction horizontale. Les résultats numériques fournissent également des données quantitatives sur les différentes formes d'énergie consommées durant le cisaillement confirmées par d'autres résultats physiques et numériques publiés. Sur la base des postulats précédents, un examen minutieux des résultats des essais de cisaillements directs et de données issues de la littérature a été accompli afin d'évaluer la fiabilité des formules empiriques bien connues de Bolton et Collins et al. avec leurs constantes couramment employées en condition de déformation plane. L'étude montre qu'une application des relations empiriques de force-dilatation de cisaillement avec les constantes proposées par Bolton (1986) et Collins et al. (1992) aux sables ayant une distribution de taille de particules différente peut conduire à surestimer leurs valeurs en terme de force de cisaillement. Dans cette étude, les coefficients des équations de Bolton et Collins et al. ont donc été ajustée afin de prendre en compte les caractéristiques des particules, en particulier le diamètre médian, D50. De manière analogue, les effets microstructuraux imposés par la géométrie interne des particules (par exemple la taille, la forme et la gradation des particules) sur la relation tension-dilatation très connue, celle de Rowe (1962), et son ajustement empirique en condition triaxiale drainée ont été examinés dans cette étude. Une comparaison des prédictions des formules proposées avec les données de force de cisaillement issues de la littérature fournit de nombreuses preuves en faveur des contraintes mises en place au sein des relations existantes de force-dilatation de cisaillement en condition de déformation plane et triaxiale. Ces comparaisons prouvent également que la prise en compte de la taille des grains conduit à des résultats plus tangibles que lorsque la taille de la particule n'est pas considérée. Les formules de force-dilatation ajustées peuvent se révéler avantageuses pour évaluer indépendamment la cohérence des forces de cisaillement déterminées expérimentalement et pour introduire des lois d’écoulement plus précises dans les analyses géotechniques analytiques et numériques.

Direct comparison of the bond strength results of the different test methods: A critical literature review

Objective. The goal of this paper is to undertake a literature search collecting all dentin bond strength data obtained for six adhesives with four tests ( shear, microshear, tensile and microtensile) and to critically analyze the results with respect to average bond strength, coefficient of variation, mode of failure and product ranking. Method. A PubMed search was carried out for the years between 1998 and 2009 identifying publications on bond strength measurements of resin composite to dentin using four tests: shear, tensile, microshear and microtensile. The six adhesive resins were selected covering three step systems ( OptiBond FL, Scotch Bond Multi-Purpose Plus), two-step (Prime & Bond NT, Single Bond, Clear. l SE Bond) and one step (Adper Prompt L Pop). Results. Pooling results from 147 references showed an ongoing high scatter in the bond strength data regardless which adhesive and which bond test was used. Coefficients of variation remained high (20-50%) even with the microbond test. The reported modes of failure for all tests still included high number of cohesive failures. The ranking seemed to be dependant on the test used. Significance. The scatter in dentin bond strength data remains regardless which test is used confirming Finite Element Analysis predicting non-uniform stress distributions due to a number of geometrical, loading, material properties and specimens preparation variables. This reopens the question whether, an interfacial fracture mechanics approach to analyze the dentin - adhesive bond is not more appropriate for obtaining better agreement among dentin bond related papers. (C) 2009 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.

Evaluation of a direct immunofluorescent antibody (difma) test using Leishmania genus - specific monoclonal antibody in the routine diagnosis of cutaneous leishmaniasis

A direct immunofluorescent antibody (DIFMA) test using a Leishmania genus- specific monoclonal antibody was evaluated in the routine diagnosis of cutaneous leishmaniasis (CL) in Ecuador. This test was compared with the standard diagnostic techniques of scrapings, culture and histology. Diagnostic samples were taken from a total of 90 active dermal ulcers from patients from areas of Ecuador known to be endemic for cutaneous leishmaniasis. DIFMA was positive in all lesions. It was shown to be significantly superior to standard diagnostic methods either alone or in combination. The sensitivity of DIFMA did not diminish with chronicity of lesions. This test proved to be extremely useful in the routine diagnosis of CL because it is highly sensitive, is easy to use and produces rapid results.

Evaluation of a commercial test based on ligase chain reaction for direct detection of Mycobacterium tuberculosis in respiratory specimens

A ligase chain reaction DNA amplification method for direct detection of Mycobacterium tuberculosis (Abbott LCx MTB) in respiratory specimens was evaluated. Results from LCx MTB Assay were compared with those from acid fast bacilli smear, culture, and final clinical diagnosis for each patient. A total of 297 respiratory specimens (sputum and bronchial lavage) from 193 patients were tested. The sensitivity, specificity, positive predictive value and negative predictive value of LCx vs culture were 92.7%, 93%, 67.8% and 98.7%, respectively. When compared to the clinical final diagnosis, the sensitivity, specificity, PPV and NPV for LCx were 88.9%, 96.8%, 86.5% and 97.4%, respectively. The sensitivity of LCx MTB assay was 75% for smear-negative, culture positive samples. The results indicate that LCx MTB assay is a rapid, simple and valuable technique as a complementary tool for the diagnosis of tuberculosis.

Does Direct Democracy Matters for Political Parties : An Empirical Test in the Swiss Cantons

According to most political scientists and commentators, direct democracy seems to weaken political parties. Our empirical analysis in the 26 Swiss cantons shows that this thesis in its general form cannot be maintained. Political parties in cantons with extensive use of referendums and initiatives are not in all respects weaker than parties in cantons with little use of direct democratic means of participation. On the contrary, direct democracy goes together with more professional and formalized party organizations. Use of direct democracy is associated with more fragmented and volatile party systems, and with greater support for small parties, but causal interpretations of these relationships are difficult.

Operator's, organizational, direct support, and general support maintenance manual for test set, STE-M1/FVS (4910-01-112-9655).

"January 1985."

Direct support maintenance repair parts and special tools list for test set, electronics system AN/TSM-100A (4933-01-142-2861).

"February 1984."

Organizational, direct support, and general support maintenance repair parts and special tools list ... : test set, chemical agent automatic alarm, M74 (FSN 6665-854-4147).

"September 1973."