Dinâmica não linear e projeto de controle em sistemas de transporte vertical: comportamentos periódicos e caóticos

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação das características superficiais de instrumentos reciprocantes por meio de icroscopia eletrônica de varredura antes e após o uso

Pós-graduação em Odontologia - FOAR

Estudo das microdeformações geradas ao redor de implantes de hexágono externo, sob a aplicação de cargas axiais e não axiais em pilares protéticos retos e angulados

Pós-graduação em Odontologia Restauradora - ICT

Interaction between recrystallization and strain-induced precipitation in a high Nb- and N-bearing austenitic stainless steel: influence of the interpass time

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Predição de vida em fadiga de compósitos estruturais baseado em análises dinâmico-mecânicas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Princípios de redução das fraturas panfaciais: revisão de literatura

Are called panfacial fractures when the upper, middle and lower facial thirds present fractures concurrently. In clinical practice, came to imply the involvement of two facial thirds. Panfacial fractures are usually accompanied by other systemic lesions that impair the patient's life and therefore require primary treatment. Almost invariably are associated with damage to soft tissues and severe losses of bone structures which may lead to severe facial deformations and malocclusions. The panfacial fractures treatment is complex because often there isn’t a stable bone structure to guide the reduction of various fractures. Several orders of treatment have been proposed, but they are variations of the two classical approaches "bottom to top and inside-out" and "top to bottom and out-inside". The aim of this paper is to discuss the principles of management and panfacial fractures treatment, emphasizing the sequence of fracture reduction and highlighting its indications, advantages and disadvantages, through literature review and reports of surgical clinic cases. We conclude that the exact sequence of fracture reduction is not as important as developing a treatment plan that allows accurate positioning of the fractured segments.

Caracterização experimental de sistemas mecânicos com comportamento não-linear

Pós-graduação em Engenharia Mecânica - FEIS

Anomalias e números fermiônicos induzidos em grafeno com deformações

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Rochas calciossilicáticas e feldspáticas na região de Castro Alves e Rafael Jambeiro (BA)

The towns of Castro Alves and Rafael Jambeiro, central-east of Bahia state, are located in the east of São Francisco Craton, in granulite terrains of Salvador-Curaçá Belt, formed in Paleoproterozoic. The region of study contains ortognaisses of Caraíba Complex, metamafic and metaultramafic rocks of São José do Jacuípe Suite, metasedimentary rocks of Tanque Novo-Ipirá Complex, granitoids, pegmatites and alkaline rocks. The study carried out regional and detailed geological mapping in addition to petrographical and geochemical characterization of six areas in the search for targets of feldspar and white diopside, minerals used in ceramic industry. The areas consist of granitic ortognaisses interspersed with lenses of mafic granulite rocks, calc-silicate rock, banded iron formations, paragnaisses, quartzites, and bodies of quartz-feldspar or feldspar pegmatites and alkaline rocks that fill discontinuities. The region of study contains four deformations phases, with a predominance of ductile structures. The foliation Sn has N30E to N70W direction, high angle of dip and is characterized by compositional banding of granoblastic and felsic bands interspersed with nematoblastic or lepidoblastic mafic bands. A mineral or stretching lineation Ln is associated with Sn and has trend of S55E to S72E. The rocks have been suffered a regional metamorphism with granulite facies peak and partial retrogression to greenschist facies. Geochemical studies indicate that the green coloring calc-silicate rocks have lower SiO2, MgO and higher Fe2O3 content compared with white calcssilicate rocks. The alkaline rocks of the studied area have higher Na2O, SiO2 and lower K2O, Fe2O3 content compared with others Paleoproterozoic alkaline rocks of Bahia state. The targets of diopside are associated with white calc-silicate rocks, while the targets of feldspar are associated with paragnaisses, pegmatites and alkaline rocks

Vibrações em sistemas bidimensionais

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Phenol degradation in an anaerobic fluidized bed reactor packed with low density support materials

The objective of this research was to study phenol degradation in anaerobic fluidized bed reactors (AFBR) packed with polymeric particulate supports (polystyrene - PS, polyethylene terephthalate - PET, and polyvinyl chloride - PVC). The reactors were operated with a hydraulic retention time (HRT) of 24 h. The influent phenol concentration in the AFBR varied from 100 to 400 mg L-1, resulting in phenol removal efficiencies of similar to 100%. The formation of extracellular polymeric substances yielded better results with the PVC particles; however, deformations in these particles proved detrimental to reactor operation. PS was found to be the best support for biomass attachment in an AFBR for phenol removal. The AFBR loaded with PS was operated to analyze the performance and stability for phenol removal at feed concentrations ranging from 50 to 500 mg L-1. The phenol removal efficiency ranged from 90-100%.

A nonlinear elasticity phantom containing spherical inclusions

The strain image contrast of some in vivo breast lesions changes with increasing applied load. This change is attributed to differences in the nonlinear elastic properties of the constituent tissues suggesting some potential to help classify breast diseases by their nonlinear elastic properties. A phantom with inclusions and long-term stability is desired to serve as a test bed for nonlinear elasticity imaging method development, testing, etc. This study reports a phantom designed to investigate nonlinear elastic properties with ultrasound elastographic techniques. The phantom contains four spherical inclusions and was manufactured from a mixture of gelatin, agar and oil. The phantom background and each of the inclusions have distinct Young's modulus and nonlinear mechanical behavior. This phantom was subjected to large deformations (up to 20%) while scanning with ultrasound, and changes in strain image contrast and contrast-to-noise ratio between inclusion and background, as a function of applied deformation, were investigated. The changes in contrast over a large deformation range predicted by the finite element analysis (FEA) were consistent with those experimentally observed. Therefore, the paper reports a procedure for making phantoms with predictable nonlinear behavior, based on independent measurements of the constituent materials, and shows that the resulting strain images (e. g., strain contrast) agree with that predicted with nonlinear FEA.

Performance of polymeric reinforcements in vehicle structures submitted to frontal impact

Preformed structural reinforcements have shown good performance in crash tests, where the great advantage is their weight. These reinforcements are designed with the aim of increasing the rigidity of regions with large deformations, thus stabilising sections of the vehicle that work as load path during impact. The objective of this work is to show the application of structural reinforcements made of polymeric material PA66 in the field of vehicle safety, through finite element simulations. Simulations of frontal impact at 50 km/h and in ODB (offset deformable barrier) at 57 km/h configurations (standards such as ECE R-94 and ECE R-12) were performed in the software LS-DYNA R (R) and MADYMO (R). The simulations showed that the use of polymeric reinforcements leads to a 70% reduction in A-pillar intrusion, a 65% reduction in the displacement of the steering column and a 59% reduction in the deformation in the region of the occupant legs and feet. The level of occupant injuries was analysed by MADYMO (R) software, and a reduction of 23.5% in the chest compression and 80% in the tibia compression were verified. According to the standard, such conditions lead to an improvement in the occupant safety in a vehicle collision event.

Roof modular system in wood and particle board (OSB) to rural construction

Wood is a material of great applicability in construction, with advantageous properties to form various structural systems, such as walls and roof. Most of the roof structural systems follow models that have remained unchanged for a long time. A roof modular system in distinguished materials is proposed: reforested wood (Pine), oriented strand board (OSB) and roof tiles made of recycled long-life packaging material in order to be applied in rural construction. In this alternative, besides the benefit of giving destination packages with long-life thermal comfort, it also highlights the use of reforestated wood being the cultivation of such species that provides incentive for agribusiness. The structural performance of this alternative was evaluated through computer modeling and test results of two modular panels. The analysis is based on the results of vertical displacements, deformations and stresses. A positive correlation between theoretical and experimental values was observed, indicating the model's feasibility for use in roof structures. Therefore, the modular system represents a solution to new architecture conceptions to rural construction, for example, storage construction, cattle handling and poultry, with benefits provided by prefabricated building systems.

Surface integrity analysis when milling ultrafine-grained steels

This paper quantifies the effects of milling conditions on surface integrity of ultrafine-grained steels. Cutting speed, feed rate and depth of cut were related to microhardness and microstructure of the workpiece beneath machined surface. Low-carbon alloyed steel with 10.8 µm (as-received) and 1.7 µm (ultrafine) grain sizes were end milled using the down-milling and dry condition in a CNC machining center. The results show ultrafine-grained workpiece preserves its surface integrity against cutting parameters more than the as-received material. Cutting speed increases the microhardness while depth of cut deepens the hardened layer of the as-received material. Also, deformations of microstructure following feed rate direction were observed in workpiece subsurface.