Avaliação do comportamento mecânico sob deformação da liga Ti- 30Ta visando aplicações biomédicas

Titanium and its alloys have been used for biomedical applications due their excellent properties such as high corrosion resistance, biocompatibility and mechanical properites. In this study, microstructural and mechanical properties of Ti-30Ta alloy was evaluated during its processing. Ti-30Ta alloy ingots were produced from sheets of commercially pure titanium (99.9%) and tantalum (99.9%). Its melting was realized in arc melting furnace in an argon atmosphere. After homogenizing at 1200ºC, ingots were cold worked by swaging. Samples with 13 mm in diameter were obtained. They were forging at the reduction ratios of 15%. After deformation, microstructure was evaluated by optical microscopy in each condition. Also, Vickers microhardness of samples was measured and phase constitution was evaluated using XRD analysis

Projeto mecânico do sistema de transmissão de um veículo Baja

This study aims to determine the best configuration for the new gearbox of the new Baja´s vehicle from Piratas do Vale team, focusing on the gear train, in order to achieve high performance of it. To this end, first some information about the vehicle is gathered to determine the best pair of gears configuration, then calculations about maximum bending stress, fatigue and surface thereof are performed; ; thereafter static simulations are performed using an a appropriated software. Thus this paper shows a satisfactory design of the addressed, besides providing the Baja SAE team consultation material for future use in the project

Análise do desempenho físico-mecânico de painéis compensados de Pinus sp. produzidos com adesivos aquosos a base de poliacetato de vinila e de homopolímero vinílico

This study aimed to evaluate the physico-mechanical performance of three PVA adhesive formulations according to the Brazilian standards for plywood testing and to evaluate the results with those presented in the technical literature and specified in normative documents. The study presents the production process of the panels, the obtaining of samples and, finally, the implementation of physico-mechanical characterization tests based on plywood Brazilian standards. For the panels production it was used a gramature of 120 g / m² and applied a pressure of 15 bars and two temperature combinations and pressing time for each adhesive. The commercial adhesives used were PVA 1810, PVA 1060 and Vinyltec 239. The physical tests conducted were thickness swelling, density, moisture content and water absorption. The mechanical tests were static flexion, for the determination of elasticity modulus (MOE) and rupture modulus (MOR), and shear in the glue line. Among the three formulations studied none showed good performance in the presence of water. However, other trials in the adhesive showed better results and closer to the commercially equivalent used, in the case the urea-formaldehyde, was the PVA 1810, that can be applied in non-structural uses and in environments without the presence of moisture

Variabilidade espacial dos atributos físicos e químicos em um gleissolo mecânico sob três áreas no município Arari - MA

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Comportamentos, térmico e mecânico, de compósitos de polipropileno e resíduo da hidrólise enzimática do bagaço de cana de açúcar

Pós-graduação em Engenharia Mecânica - FEG

Projeto mecânico de um modelo para túnel de vento e validação de seus componentes à partir de simulações em software de elementos finitos

The objective of this study was to develop a model that allows testing in the wind tunnel at high angles of attack and validates its most critical components by analyzing the results of simulations in finite element software. During the project this structure suffered major loads identified during the flight conditions and, from these, we calculated the stresses in critical regions defined as the parts of the model that have higher failure probabilities. All aspects associated with Load methods, mesh refining and stress analysis were taken into account in this approach. The selection of the analysis software was based on project needs, seeking greater ease of modeling and simulation. We opted for the software ANSYS® since the entire project is being developed in CAD platforms enabling a friendly integration between software's modeling and analysis

Projeto mecânico de um redutor de engrenagens sem-fim numa esteira transportadora inclinada

This work aims to present the design and development of a speed reducer worm gear that will be implemented on an inclined treadmill that aims to raise the load below the top floor. The project start was made with research on issues related to mechanisms and machine elements, and these theories of fundamental importance in the development of device components, along with the help of SolidWorks software that was used to model the main parts of the project and Microsoft Office Excel 2007 was used to alight formulas to perform calculations of the project. All data for calculations were taken from the conditions of the problem to be solved in the best possible way the proposed problem (lifting load from the belt). Following the entire sequence of design gearbox assembly, beginning in pre-sizing and endless selection of electric motor, which consists of an iterative project, then scaling the worm gear and crown, shafts, splines, calculation and bearing selection

Estudo mecânico comparativo da estabilização de fratura ilíaca com dois tipos de implantes (parafusos com placa de compressão dinâmica e parafusos associados ao polimetilmetacrilato) em hemipelves caninas sintéticas

Pós-graduação em Cirurgia Veterinária - FCAV

Influência da adição do nióbio no comportamento mecânico e microestrutural do aço SAE 6150

Pós-graduação em Engenharia Mecânica - FEG

Identificação de parâmetros em sistemas rotativos utilizando funções de otimização e observadores de estado

Pós-graduação em Engenharia Mecânica - FEIS

Comparação entre a recuperação da economia de corrida e força muscular medida por diferentes métodos após o dano muscular

The goal of the present study was to investigate possible differences towards strenght recovery measured by different methods and running economy (RE), after one session of downhill running (DR), in order to induce muscle damage (MD). Our hypothesis is that the strenght recovery measured by jumps is more alike RE markers, due to the measures' specificity. Ten male subjects, ages 18 to 30, apparently healthy, without any experience with strenght training at least 6 months before the tests took place in this study. After going to the lab twice (to familiarize themselves with the protocols, and determine their maximum oxygen consumption/running speeds), they went to the lab five times in the following week, in order to collect all the variables before, immediately after, and 24, 48, 72 and 96 hours in. The variables obtained were: stride frequency (SF), stride lenght (SL), oxygen volume (VO2), carbon dioxide volume (VCO2), ventilation (VE), lactate blood concentration ([Lac]), isometric peak torque (IPT), subjective pain perception (SPP), effort perception (EP), medial-portion circumference (CIR), knee movement extent (EXT), torque development rate (TDR), counter movement jump and squat jump height (HCM and HS), strenght development rate of both jumps (SDCM and SDS), and maximum soil strenght reaction (SRCM and SRS). Changes over time in all variables were verified by one way variancy analysis. Differences between the strenght measures were verified by two way variancy analysis. When significant effects were verified, Tuckey's post-hoc were applied. The significancy level taken on this study was p < 0,05. Of all indirect muscle damage markers, IPT, SPP and TDR were the only ones in which ocurred significant changes. We couldn't find the moments where this happened for TDR with the post-hoc used. On RE markers, VO2, [Lac] and VE suffered significant effects over time. About the jumps variables, only SDCM and HCM presented significant...

Criptorquidia e exposição in utero ao di(n-butil)-ftalato e à acrilamida: avaliação morfológica do dano testicular

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Análise de materiais para sistemas de fechamento ósseo através da caracterização superficial e comportamento mecânico

Pós-graduação em Engenharia Mecânica - FEB

Chá mate melhora a resistência à natação e reduz o dano oxidativo induzido pelo exercício em ratos submetidos à única sessão de natação

Several nutritional interventions are performed in order to reduce the impact of EO induced by exercise. Some studies suggest that mate tea (CM) have compounds, which can act as antioxidants reducing EO. The aim of this study was to evaluate the effect of CM induced under the EO after a single bout of aerobic exercise. Methods: We used male Wistar rats (50 days and 200g) distributed in four experimental groups: control (CON); mate tea (CM), Swimming (N); Swimming+mate tea (N + CM) . The CM and N+CM groups received CM diluted in distilled water at 96 ° C for five days, oropharyngeal route (50 mg / kg body weight, 0.5 mL). Both groups were adapted to the aquatic environment prior to experimental day, after a single swimming session, with 5% of body weight attached to the tail, until the animals reached exhaustion. Immediately after the state of exhaustion, peripheral blood was collected for further analysis. Results: The animals of the group N + CM showed improved resistance swimming compared to group C (p < 0.0001). No increase in lipid oxidative damage and production of lactate in group N + CM , compared to group N , may be attributed to the significant increase in plasma uric acid concentrations demonstrated in this study was observed . Conclusion: Therefore, the results indicate that consumption of CM may be natural strategy for improving aerobic exercise endurance and reduce the impact of EO induced by aerobic exercise.