Surface roughness and high density of cubic twins and hexagonal inclusions in cubic GaN epilayers

Surface roughness and its correlation with the polarity of internal hexagonal inclusions and cubic twins have been investigated by atomic force microscopy (AFM), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). The surface roughness resulted from large amount of strips, which prolonged in [1 (1) over bar0] direction with small size in [110] or [110] direction. The sidestep of each strip is just the top of high density of hexagonal inclusions or cubic microtwins. Moreover, XRD shows that the amount of hexagonal inclusions and cubic microtwins measured in [110] direction are twice or more as much as in [110] direction. Therefore, it is hexagonal inclusions, cubic twins and their distributive polarity that is responsible to the surface characteristics of cubic GaN epilayers.

Thermal induced facet destructive feature of quantum cascade lasers

We present a study on the facet damage profile of quantum cascade lasers (QCLs). Conspicuous cascade half-loop damage strips on front facet are observed when QCLs catastrophically failed. Due to the large difference on thermal conductivities between active region and the substrate, dominant heat is compulsively driven to the substrate. Abundant heat accumulation and dissipation on substrate build large temperature gradient and thermal lattice mismatch. Thermal-induced stress due to sequential mismatch leads to the occurrence of the multistep damages on front facet. Good agreement is achieved between the observed locations of damaged strips and the calculated results.

Multi-strip MRPCs for FOPI

During the last years FOPI has developed a new ToF system as an upgrade of the existing detector based on Multi-strip Multi-gap Resistive Plate Chambers (MMRPCs). The intention is to increase the charged Kaon identification up to a laboratory momentum of 1 GeV/c and to enhance the azimuthal detector granularity. The new ToF barrel has an active area of 5 m(2) with 2400 individual strips (900 x 1.6 mm(2)) [A. Schuttauf, et al., Nucl. Phys. B 158 (2006) 52] which are read out on both sides by a custom designed electronics [M. Ciobanu, et al., IEEE Trans. Nucl. Sci. NS-54 (4) (2007) 1201; K. Koch, et al., IEEE Trans. Nucl. Sci. NS-52(3) (2005) 745]. To reach the envisaged goal a time resolution of 100 ps is needed, at a flight path of 1-1.3 m. Due to the rare production of the K- at SIS energies the efficiency of the MMRPCs has to be above 95%. We report on measurements with the detectors and electronics from the mass production line. For this purpose we used a proton beam at 2.0 and 1.25 GeV, at rates between 0.1 and 5 kHz/cm(2) to determine the timing, efficiency and rate capability of the MMRPCs

八单元一维位置灵敏雪崩室

In the experiment of nuclear reaction, it is important to measure the mass, charge, energy and emitted direction of particles. For multiparameter measurement, we must use a detector or a group of detectors which can give the time, energy, and position information. The Large Area position sensitive Ionization Chamber(LAIC) is one of the eight experiment terminals of HIRFL. It is built for researching nuclear reactions from low energy to intermediate energy. It is an excellent equipment for energy measurements and atomic number identification of emitted fragments in this energy region. It is also designed to give the time and position information of the emitted fragments by itself. Obviously, an IC can not supply a good timing signal. Moreover, the mechanical installation is different from the original design by some other reasons. In this case, it is not enough to obtain the correct direction information of the emitted fragments. To obtain good timing signals and the correct direction information, some modifications must be made. It is well known that a PPAC can give us excellent timing signals. It also can be easily built as a position sensitive detector. For this reason, a specially designed PPAC is installed in the entrance of the LAIC. For the different purposes, two types of PPACs were designed and tested. Both are OCTPSACs (OCTunit one dimension Position Sensitive Avalanche Counter). In this paper, both OCTPSACs will be introduced. Based on the requirements of the LAIC, the OCTPSACs consist of eight position sensitive PPACs. Each PPAC has an anode and a cathode. In both cases, the sizes are same. But different type of cathodes are used. In one type of OCTPSAC, its cathode is made of wire plane. It consists of gold-plated tungsten wires with the diameter of 20μm, spaced 0.5 mm apart from each other. The anode is a mylar foil which was evaporated by gold layer with the thickness of 50μg/cm~2 mounted on a printed plate in the shape of rectangle. the thickness of mylar foil is 1.5μm. The gap between anode and cathode is 3mm. The performance of the OCTPSAC has been tested by using a ~(252)Cf source in flowing isobutylene gas at the pressure of 3.4mb. The intrinsic time resolution of 289ps and position resolution of 2 mm have been obtained. In another type of OCTPSAC, the cathode is made of mylar foil, which is composed of gold strip by vacuume evaporation method with a special mask on the mylar foil. The thickness and the width of the gold strip is 50μg/cm~2 and 1.7mm. The strips are spaced 0.3 mm apart from each other. The anode is the same as the former type. We have obtained the time resolution of 296ps and position resolution of 2mm by using ~(241)Am-a source when the gas pressure is 6 mb and high voltage is 600V. The working gas is heptane

Flow injection electrochemical enzyme immunoassay based on the use of an immunoelectrode strip integrate immunosorbent layer and a screen-printed carbon electrode

A flow injection amperometric immunoassay system based on the use of screen-printed carbon electrode for the detection of mouse IgG was developed. An immunoelectrode strip, on which an immunosorbent layer and screen-printed carbon electrode were integrated, and a proposed flow cell have been fabricated. The characterization of the flow immunoassay system and parameters affecting the performance of the immunoassay system were studied and optimized. Amperometric detection at 0.0 V (versus Ag/AgCl) resulted in a linear detection range of 30-700 ng ml(-1), with a detection limit of 3 ng ml(-1). The signal variation among electrode strips prepared from variant batch did not exceed 8.5% (n = 7) by measuring 0.5 mug ml(-1) antigen standard solution.

Short-term morphological changes after sand-digging during a sand sculpture activity

The morphology of the beach backshore and foreshore at Huiquan Bay, Qingdao, China, is characterized by a single intertidal sandbar system with a spring tide range of 4.59 m. The beach was measured with a laser total station of Leica TPS402. Contours of the beach were generated using data collected in March and November 2005. The survey method provided 2 mm measuring accuracy and 4-10 m horizontal spacing. The net accretion volume of the foreshore was about 11, 215 m(3) from March to November. After sand sculpture activity, the axis of the sand trough migrated onshore from about 3.5 m to 17.5 m on the foreshore beach in November. At the same time, the axis of the sandbar crest migrated onshore no more than 42.25 m on the northwest foreshore; and it migrated offshore no more than 23.75 m on the southeast foreshore. On the northwest and southeast foreshore beach, two strips of erosion areas with a thickness of 0-0.2 m appeared on the sandbar crest. Accretion occurred at the bottom of the sand trough with a thickness of similar to 0.2-0.6 m. The sandbar height decreased after sand sculpture activity, and it was no more than 0.7 m in March and 0.6 m in November. Human activities, such as sand digging on the sandbar crest during sand sculpture activity, also can disturb the beach morphology of intertidal bar systems. This phenomenon also was validated by comparison of beach morphology, the results of a color artificial tracer experiment and a sediment transportation trend prediction.

卷烟厂制丝线生产过程建模与计划仿真

对当前卷烟厂制丝线计划与调度管理中存在的不足进行了介绍,并在建立制丝生产线生产过程模型的基础上,提出了用于解决问题的计划仿真系统,对所采用的仿真策略进行了详细介绍。采用这一策略实现的仿真系统能够很方便的适应于其他行业类型的仿真。

卷烟厂制丝线计划仿真系统开发

文章首先分析了卷烟厂制造执行系统(MES)的特点以及发展现状,在此基础上对制丝线进行了介绍,指出了当前制丝线计划与调度管理中存在的不足,并提出了用于解决问题的计划仿真系统,最后在一个模拟的卷烟厂制丝线环境下实现了该系统。

卷烟厂制丝线生产过程建模与计划仿真技术研究

本课题结合国家863高技术计划“面向流程与混合行业的可配置MES产品及行业解决方案”项目2007AA040702和“吉林省延吉卷烟厂制丝生产线生产管理系统”项目选题进行研究与软件开发。是项目研究的主要内容之一，本人主要负责仿真模型建立模块中各项功能的设计与开发。 烟草行业作为一个特殊的行业，它面临着来自市场和国家计划的双重压力，面对这些压力，为了更好的应对市场，烟草企业采用制造执行系统(Manufacturing Execution System，MES)来对卷烟的整个生产过程进行管理。用于完成制丝的制丝生产线是烟草企业最重要的环节，它的工作性能直接决定了卷烟的质量及生产效益。其中，计划的合理性程度以及具体的执行情况是影响其工作性能的关键因素。当前制丝线MES系统的计划调度模块是通过基于规则的调度策略来获得调度方案以对制丝线的生产进行管理，这些规则是根据实际的经验从生产现场抽取得到，在一定程度上保证了计划调度的合理性，但不能保证获得符合实际情况的最优的调度方案，并且在此过程中没有考虑异常事件发生时的应对措施，由于这种调度策略的局限性以及生产线中异常事件发生的随机性，当前制丝线MES系统的计划调度模块已无法很好的管理制丝线的生产。 为解决上述问题，本文在对卷烟厂制丝线生产过程进行建模的基础上，提出并开发了制丝线的计划仿真系统。通过仿真模拟整个制丝生产过程，不仅能确定计划制定的合理性程度，还能预测异常事件发生时对整个计划执行的影响程度，进而采取相应的措施来保证生产的效率。本文的主要研究工作如下： 1、概述了当前主要的生产过程建模方法和离散事件仿真方法，对每种方法的特点进行了概括和总结，在此基础上提出了本文所采用的建模和仿真方法。其中的仿真方法较已有方法在程序实现上做了改进。 2、在对现有的烟草企业制丝线生产过程进行分析的基础上，采用面向对象的建模方法对其进行建模，为生产计划仿真提供基础。 3、设计了生产计划仿真系统的整体框架，对各功能模块设计、系统设计及其实现技术作了细致的阐述。 4、开发实现了该计划仿真系统并针对延吉卷烟厂新厂区制丝线进行计划仿真，分析表明，仿真效果良好。

动漫行业创业者胜任特征研究

Venture has become an important force for the sustainable economic growth of China, However, research on entrepreneurs is far failed to meet the actual needs, Animation and Comic Industry is an important component of the state-led Cultural and Creative Industries. Entrepreneurship is the rapid growth of population, but the empirical research on the Animation and Comic Industry entrepreneurs’ Competent Characteristic Model is rarely heard. As a manager of a national incubator which major in Cultural and Creative Industry, study these entrepreneurs competent characteristics is my responsibility. As an exploration, the study uses Competent Characteristic Model of classical design methods and behavior events interview method, and selects entrepreneurs which of animation and comic industry business start-up period as the objects. Through coding analysis of 31 entrepreneurs’ interview information, completed the amendment to the dictionary coding, and ultimately construct the animation and comic industry entrepreneurs need to have the threshold competence model and differentiating competence model. Differentiating competence model includes six competencies: tolerance and optimism, cooperation, creative innovation, pool talents, vision, decision-making and tempo control. Threshold competence model includes twenty features, divided into three dimensions: personal characteristics, knowledge quality, capacity of the quality. Knowledge and capacity of the quality are closely related to the core work of entrepreneurs, Personal characteristics concern the deep-seated motivation of the entrepreneurs. The study also analyses and discusses the characteristics of the entrepreneurs on the demographic variables.

Systematic Nonlinear Planning

This paper presents a simple, sound, complete, and systematic algorithm for domain independent STRIPS planning. Simplicity is achieved by starting with a ground procedure and then applying a general and independently verifiable, lifting transformation. Previous planners have been designed directly as lifted procedures. Our ground procedure is a ground version of Tate's NONLIN procedure. In Tate's procedure one is not required to determine whether a prerequisite of a step in an unfinished plan is guarnateed to hold in all linearizations. This allows Tate"s procedure to avoid the use of Chapman"s modal truth criterion. Systematicity is the property that the same plan, or partial plan, is never examined more than once. Systematicity is achieved through a simple modification of Tate's procedure.

Shape from Shading: A Method for Obtaining the Shape of a Smooth Opaque Object from One View

A method will be described for finding the shape of a smooth apaque object form a monocular image, given a knowledge of the surface photometry, the position of the lightsource and certain auxiliary information to resolve ambiguities. This method is complementary to the use of stereoscopy which relies on matching up sharp detail and will fail on smooth objects. Until now the image processing of single views has been restricted to objects which can meaningfully be considered two-dimensional or bounded by plane surfaces. It is possible to derive a first-order non-linear partial differential equation in two unknowns relating the intensity at the image points to the shape of the objects. This equation can be solved by means of an equivalent set of five ordinary differential equations. A curve traced out by solving this set of equations for one set of starting values is called a characteristic strip. Starting one of these strips from each point on some initial curve will produce the whole solution surface. The initial curves can usually be constructed around so-called singular points. A number of applications of this metod will be discussed including one to lunar topography and one to the scanning electron microscope. In both of these cases great simplifications occur in the equations. A note on polyhedra follows and a quantitative theory of facial make-up is touched upon. An implementation of some of these ideas on the PDP-6 computer with its attached image-dissector camera at the Artificial intelligence Laboratory will be described, and also a nose-recognition program.

Recristalización de bandas de aluminio procedentes de colada continua, laminadas en frío

Este artículo revisa la bibliografía existente sobre los problemas que la banda de colada continua, laminada en frío, presenta en su recristalización. Se examinan los impedimentos que presenta la precipitación de elementos de aleación o impurezas, previa o simultánea a la recristalización, para la nucleación de la recristalización y por tanto para ésta. Se explica el uso de las curvas TTT (Temperatura, Tiempo, Transformación) para la determinación de temperatura y velocidad de calentamiento críticas para llegar a la recristalización sin pasar por la zona de precipitación. Se explica también la obtención de curvas CTT (Concentración, Tiempo, Transformación) y "diagramas de tamaño de grano" para aleaciones Al-Mn en función de la velocidad de calentamiento y contenido de manganeso en solución sólida.

Biblioteka Uniwersytecka w Poznaniu w Web 2.0 - rozwój przyjaznej komunikacji cyfrowej i wynikające z niej korzyści

Poster pokazuje metody komunikacji z czytelnikiem stosowane w Bibliotece Uniwersyteckiej w Poznaniu w technologii mediów cyfrowych. Cyfrowe narzędzia komunikacji stały się bardzo pomocne, niemal niezbędne w pozyskiwaniu nowych czytelników, podtrzymywaniu i rozwijaniu współpracy w społeczności w sieci Web.2.0, zarówno tej globalnej, jak i lokalnej akademickiej. Strona WWW jako statyczna komunikacyjnie jest wspierana przez fora dyskusyjne, chaty, wideokonferencje, warsztaty informacyjne, które są prowadzone w czasie rzeczywistym. Twórczą siłę relacji społecznych z biblioteką rozwinęły interaktywne serwisy społecznościowe (Facebook) oraz komunikatory internetowe integrowane na platformie Ask a Librarian. Biblioteka stała się Biblioteką 2.0 ukierunkowaną na komunikację z czytelnikiem. Aktywne uczestnictwo i udział czytelników przy tworzeniu zasobów naukowych wdrożyliśmy w projekcie instytucjonalnego repozytorium - Adam Mickiewicz Repository (AMUR). Biblioteka zmienia się dla czytelników i z czytelnikami. Wykorzystywane platformy i serwisy społecznościowe dostarczają unikatowych danych o nowych potrzebach informacyjnych i oczekiwaniach docelowego Patrona 2.0, co skutkuje doskonaleniu usług istniejących i tworzeniu nowych. Biblioteka monitoruje usługi i potrzeby czytelników przez prowadzone badania społeczne. Technologie cyfrowe stosowane w komunikacji sprawiają, iż biblioteka staje się bliższa, bardziej dostępna, aby stać się w rezultacie partnerem dla stałych i nowych czytelników. Biblioteka Uniwersytecka w Poznaniu bierze udział w programach europejskich w zakresie katalogowania i digitalizacji zasobu biblioteki cyfrowej WBC, w zakresie wdrożenia nowych technologii i rozwiązań podnoszących jakość usług bibliotecznych, działalności kulturotwórczej (Poznańska Dyskusyjna Akademia Kominksu, deBiUty) i edukacji informacyjnej. Biblioteka Uniwersytecka w Poznaniu jest członkiem organizacji międzynarodowych: LIBER (Liga Europejskich Bibliotek Naukowych), IAML (Stowarzyszenie Bibliotek Muzycznych, Archiwów i Ośrodków Dokumentacji), CERL - Europejskie Konsorcjum Bibliotek Naukowych.

Compressive membrane action in composite floor slabs in the Cardington LBTF

This paper presents the results of an experimental study (the ultimate load capacity of composite metal decking/concrete floor slabs. Full-scale in situ testing of composite floor slabs was carried out in the Building Research Establishment's Large Building Test Facility (LBTF) at Cardington. A parallel laboratory test programme, which compared the behaviour of composite floor slabs strips, also carried out at Queen's University Belfast (QUB). Articular attention was paid to the contribution of compressive membrane action to the load carrying capacity. The results of both test programmes were compared with predictions by yield line theory and a theoretical prediction method in which the amount of horizontal restraint mid be assessed. The full-scale tests clearly demon-wed the significant contribution of compressive membrane effects to the load capacity of interior floor panels with a lesser contribution to edge/corner panels.