YIn0.9Mn0.1O3-ZnO nano-pigment exhibiting intense blue color with impressive solar reflectance

The current study reports on the synthesis and characterization of a new inorganic nano-pigment with an intense blue color and high solar radiation reflective properties (70%). The nano-pigment YIn0.9Mn0.1O3-ZnO was synthesized by a sol-gel combustion method and characterized with the aid of X-Ray diffraction, Raman spectroscopy, Magnetic susceptibility, Transmission electron microscopy, UV ndash;vis-NIR diffuse reflectance spectroscopy and CIE-1976 L*a*b* color measurements. The Rietveld refinement of the XRD patterns of the developed nano-pigment disclosed the existence of YIn0.9Mn0.1O3 and ZnO in a 1:1 ratio with hexagonal crystal structures. For comparison, YIn0.9Mn0.1O3 was also synthesized by the sol gel combustion route and its optical properties compared with that of YIn0.9Mn0.1O3-ZnO. It is interesting to note that the developed YIn0.9Mn0.1O3-ZnO nano-pigmeht exhibits superior blue hue (b* = -40.55) and solar reflectance (R* = 70%) values as compared to the YIn0.9Mn0.1O3 nano-pigment (b* = -22.28, R* = 50%). Most importantly, the potential utility of the nano-pigment as a ``Cool Pigment'' was demonstrated by coating onto roofing materials like aluminum roofing sheets. (C) 2015 Elsevier Ltd. All rights reserved.

Microstructural features of an iron-based laser coating

A high toughness wear resistant coating is produced by laser clad Fe-Cr-W-Ni-C alloys. The microstructural and compositional features of the laser-solidified microstructures and phase evolutions occurring during high temperature tempering at 963 K were investigated by using analytical electron microscopy with energy dispersive X-ray analysis. The clad coating possesses the hypereutectic microstructure consisted of M7C3 + (Y + M7C3) Du ring high temperature aging, the precipitation of M23C6 and M2C in austenite and in situ transformation of dendritic M7C3 to M23C6 and eutectic M7C3 to M6C occurred. The laser clad coating reveals an evident secondary hardening and superior impact wear resistance.

Numerical Simulation of Transient Thermal Features in the Remelting Processing of Stainless Steel

应用有限元方法对层流等离子体射流不锈钢表面重熔工艺中的瞬态热物理现象进行了数值模拟研究.针对不同加热距离,确定了材料熔化和凝固过程中的瞬态温度场、温度梯度和凝固率的时间和空间分布特征.通过引入等效温度面积密度概念,研究了不锈钢重熔热处理的适合条件.结果表明,9～13mm的范围是较为适宜的加热距离,该结果与试验观察基本符合.

Computational study of viscous effects on lobed mixer flow features and performance

This article describes a computational study of viscous effects on lobed mixer flowfields. The computations, which were carried out using a compressible, three-dimensional, unstructured-mesh Navier-Stokes solver, were aimed at assessing the impacts on mixer performance of inlet boundary-layer thickness and boundary-layer separation within the lobe. The geometries analyzed represent a class of lobed mixer configurations used in turbofan engines. Parameters investigated included lobe penetration angles from 22 to 45 deg, stream-to-stream velocity ratios from 0.5 to 1.0, and two inlet boundary-layer displacement thicknesses. The results show quantitatively the increasing influence of viscous effects as lobe penetration angle is increased. It is shown that the simple estimate of shed circulation given by Skebe et al. (Experimental Investigation of Three-Dimensional Forced Mixer Lobe Flow Field, AIAA Paper 88-3785, July, 1988) can be extended even to situations in which the flow is separated, provided an effective mixer exit angle and height are defined. An examination of different loss sources is also carried out to illustrate the relative contributions of mixing loss and of boundary-layer viscous effects in cases of practical interest.

Turbulence modeling for flows around convex features giving rapid eddy distortion

Reynolds averaged Navier-Stokes model performances in the stagnation and wake regions for turbulent flows with relatively large Lagrangian length scales (generally larger than the scale of geometrical features) approaching small cylinders (both square and circular) is explored. The effective cylinder (or wire) diameter based Reynolds number, ReW ≤ 2.5 × 103. The following turbulence models are considered: a mixing-length; standard Spalart and Allmaras (SA) and streamline curvature (and rotation) corrected SA (SARC); Secundov's νt-92; Secundov et al.'s two equation νt-L; Wolfshtein's k-l model; the Explicit Algebraic Stress Model (EASM) of Abid et al.; the cubic model of Craft et al.; various linear k-ε models including those with wall distance based damping functions; Menter SST, k-ω and Spalding's LVEL model. The use of differential equation distance functions (Poisson and Hamilton-Jacobi equation based) for palliative turbulence modeling purposes is explored. The performance of SA with these distance functions is also considered in the sharp convex geometry region of an airfoil trailing edge. For the cylinder, with ReW ≈ 2.5 × 103 the mixing length and k-l models give strong turbulence production in the wake region. However, in agreement with eddy viscosity estimates, the LVEL and Secundov νt-92 models show relatively little cylinder influence on turbulence. On the other hand, two equation models (as does the one equation SA) suggest the cylinder gives a strong turbulence deficit in the wake region. Also, for SA, an order or magnitude cylinder diameter decrease from ReW = 2500 to 250 surprisingly strengthens the cylinder's disruptive influence. Importantly, results for ReW ≪ 250 are virtually identical to those for ReW = 250 i.e. no matter how small the cylinder/wire its influence does not, as it should, vanish. Similar tests for the Launder-Sharma k-ε, Menter SST and k-ω show, in accordance with physical reality, the cylinder's influence diminishing albeit slowly with size. Results suggest distance functions palliate the SA model's erroneous trait and improve its predictive performance in wire wake regions. Also, results suggest that, along the stagnation line, such functions improve the SA, mixing length, k-l and LVEL results. For the airfoil, with SA, the larger Poisson distance function increases the wake region turbulence levels by just under 5%. © 2007 Elsevier Inc. All rights reserved.

Coarse-to-fine vision-based localization by indexing scale-invariant features

This paper presents a novel coarse-to-fine global localization approach inspired by object recognition and text retrieval techniques. Harris-Laplace interest points characterized by scale-invariant transformation feature descriptors are used as natural landmarks. They are indexed into two databases: a location vector space model (LVSM) and a location database. The localization process consists of two stages: coarse localization and fine localization. Coarse localization from the LVSM is fast, but not accurate enough, whereas localization from the location database using a voting algorithm is relatively slow, but more accurate. The integration of coarse and fine stages makes fast and reliable localization possible. If necessary, the localization result can be verified by epipolar geometry between the representative view in the database and the view to be localized. In addition, the localization system recovers the position of the camera by essential matrix decomposition. The localization system has been tested in indoor and outdoor environments. The results show that our approach is efficient and reliable. © 2006 IEEE.

Combining interest points and edges for content-based image retrieval

This paper presents a novel approach using combined features to retrieve images containing specific objects, scenes or buildings. The content of an image is characterized by two kinds of features: Harris-Laplace interest points described by the SIFT descriptor and edges described by the edge color histogram. Edges and corners contain the maximal amount of information necessary for image retrieval. The feature detection in this work is an integrated process: edges are detected directly based on the Harris function; Harris interest points are detected at several scales and Harris-Laplace interest points are found using the Laplace function. The combination of edges and interest points brings efficient feature detection and high recognition ratio to the image retrieval system. Experimental results show this system has good performance. © 2005 IEEE.

Image-based localization and pose recovery using scale invariant features

In this paper, we propose a vision based mobile robot localization strategy. Local scale-invariant features are used as natural landmarks in unstructured and unmodified environment. The local characteristics of the features we use prove to be robust to occlusion and outliers. In addition, the invariance of the features to viewpoint change makes them suitable landmarks for mobile robot localization. Scale-invariant features detected in the first exploration are indexed into a location database. Indexing and voting allow efficient recognition of global localization. The localization result is verified by epipolar geometry between the representative view in database and the view to be localized, thus the probability of false localization will be decreased. The localization system can recover the pose of the camera mounted on the robot by essential matrix decomposition. Then the position of the robot can be computed easily. Both calibrated and un-calibrated cases are discussed and relative position estimation based on calibrated camera turns out to be the better choice. Experimental results show that our approach is effective and reliable in the case of illumination changes, similarity transformations and extraneous features. © 2004 IEEE.

Evaluación preliminar de sesenta y tres lineas avanzadas de frijol común (Phaseolus vulgaris L.) de grano color negro en la Estación Experimental La Compañía, Carazo

El experimento fue establecido en la estación experimental “La Compañía”, San Marcos, Departamento de Carazo, Nicaragua, durante la época de postrera (Octubre-Diciembre) de 2003, con los objetivos de identificar genotipos de frijol común (Phaseolus vulgaris L) con mejores resultados en cuanto a rendimiento, evaluar las principales características fenológicas y determinar la incidencia y severidad de las principales enfermedades. Las líneas estudiadas provienen del vivero de adaptación centroamericano de grano negro (VIDAC-Negro-2003). Se utilizó un testigo, la variedad Guaymí; el diseño empleado fue el de ensayo preliminar, el cual consistió en un surco por línea de 3m de longitud con el testigo intercalado cada 9 surcos. Los análisis estadísticos realizados a los datos fueron: media, desviación estándar, coeficiente de variación, distribución de frecuencias y correlaciones Pearson. Entre los caracteres evaluados se midieron 13 variables, 3 sobre fenología, hábito de crecimiento, cinco sobre el rendimiento y sus componentes y enfermedades, entre las cuales se evaluaron mustia hilachosa y mancha de la hoja. Se observaron amplios rangos de comportamiento sobre fenología, rendimiento y sus componentes y enfermedades. Respecto a las variables fenológicas se observaron rangos de 33 a 40 dds en el número de días a floración, los días a madurez fisiológica oscilaron entre 63 y 72 dds y los días a cosecha entre 70 y 83 dds. Respecto al hábito de crecimiento las líneas fueron en su totalidad indeterminadas (IIa y IIb), en su mayoría IIb. En cuanto a los componentes del rendimiento el número de vainas por planta osciló entre 1 y 15.6, el número de granos por vaina entre 3.1 y 6.5, las plantas cosechadas entre 8 y 40 y el peso de 100 granos entre 12.31 y 30.25 g. Respecto al rendimiento relativo osciló entre 7.86205.88 %, encontrándose 15 líneas que superaron al testigo. La mayoría de los materiales presentaron severidad a mustia hilachosa con valores de 1 a 6, para mancha de la hoja la severidad osciló entre 2 y 5.

Caracterización y evaluación de siete genotipos de frijol común grano color rojo (Phaseolus vulgaris L.) en la Estación Experimental La Compañía, Carazo, 2004-2005

El presente ensayo se realizó en el centro experimental La Compañía, San Marcos Departamento de Carazo, Nicaragua en la época de primera (junio–agosto del 2004), con el fín de caracterizar y evaluar el comportamiento de 7 genotipos de frijol rojo, proporcionadas por el Programa Internacional de Viveros de Adaptación y Rendimiento, del Centro Internacional de Agricultura Tropical (CIAT) , en coordinación con el Instituto Nicaragüense de Tecnología Agropecuaria (INTA). Fue establecido un diseño de bloques completamente al azar con tres repeticiones; el tamaño de la muestra fue de 10 plantas para caracteres cuantitativos y para los cualitativos se basó en el aspecto de predominancia de caracteres. Se realizó el análisis de varianza y la separación de medias por Tukey al 95% de confianza para las variables del rendimiento y sus componentes; así como la media, desviación estándar y coeficiente de variación para caracteres relacionados al desarrollo y crecimiento. Fueron evaluados 18 caracteres cuantitativos y 15 cu alitativos. De acuerdo con los resultados la semilla se clasificó como pequeña, con forma ovoidea, alargada ovoidea y arriñonada recta en el lado del hilo, esta última con mayor frecuencia; el grano presentó color, rojo claro con testa brillante y rojo marrón oscuro con testa intermedio, predominan do el color rojo claro con testa brillante. Los análisis estadísticos indican que solo dos genotipos difirieron estadísticamente en cuanto al rendimiento, obteniendo el mayor valor el SRC 1-12-1-43 con 2203.9 kg ha -1 , no mostrando diferencias estadísticas las demás variables relacionadas. Todos los genotipos mostraron hábito de crecimiento arbustivo indeterminado (IIb). Respecto a las variables fenológicas se observaron rangos de 36 a 38 dds para el número de días a floración, los días a madurez fisiológica oscilaron entre 62 y 68 dds y los días a cosecha entre 66 y 72 dds, ubicándose de esta manera como materiales precoces. Todos los materiales presentaron daños de las enfermedades mustia hilachosa ( Thanatephorus cucumeris Frank) y mancha angular ( Isariopsis griseola Sacc) con niveles de severidad intermedia con excepción de los genotipos SRC 1-12-1-43 y MPN 103-25, que mostraron susceptibilidad a la mustia hilachosa; sin embargo estos alcanzaron los mayores rendimientos.

Evaluación de dieciseis genotipos de frijol comun de color negro (Phaseolus vulgaris, L.) en epoca de apante, Yasica Sur, San Ramón, Matagalpa

El presente ensayo se realizó en Yasica Sur, San Ramón, Matagalpa, en época de apante del 23 de Noviembre del 2002 al 24 de Febrero del 2003, con el objetivo de evaluar el comportamiento agronómico de 16 genotipos de fríjol común de grano color negro (Phaseolus vulgaris L.) a las condiciones de la localidad, a fin de encontrar alternativas de materiales genéticos para pequeños y medianos productores de frijol común. Para el estudio se utilizó un diseño experimental unífactorial en bloques completos al azar (B.C.A) con 4 repeticiones y 16 tratamientos. Los resultados de campo se procesaron mediante el programa sistema análisis estadístico (SAS V.8), la prueba de rango múltiple de Tukey al 0.01 por ciento de error para las variables evaluadas y correlación de Person para las mismas variables. Con base en los datos obtenidos se puede afirmarque, los componentes del rendimiento grano por vainas, vainas plantas y peso de 100 granos presentaron diferencias significativas; sin embargo, la variable del rendimiento de los genotipos no muestra diferencias significativas entre sí. El análisis de correlación múltiple efectuado a las variables fenológicas mostró diferencias significativas en días a flor, madurez fisiológica y días a cosechas. Los principales hábitos de crecimiento que se presentaron entre los materiales fueron indeterminados IIb y IIIb, a diferencia del genotipo B2059 con hábito indeterminado Ib. Los genotipos evaluados con relación a enfermedades fúngicas mostraron resistencia a Roya (Uromyces appendiculatus. Pers.Unger.), Mancha angular (Isariopsis griseolas Sacc) y Tizón bacteriano o bacteriosis común (Xanthomonas campestrispv.phaseoli). .

Significant Residue Features Revealed By Eigenvalue Decomposition Analysis Of Blosum Matrices

Here we attempt to characterize protein evolution by residue features which dominate residue substitution in homologous proteins. Evolutionary information contained in residue substitution matrix is abstracted with the method of eigenvalue decomposition. Top eigenvectors in the eigenvalue spectrums are analyzed as function of the level of similarity, i.e. sequence identity (SI) between homologous proteins. It is found that hydrophobicity and volume are two significant residue features conserved in protein evolution. There is a transition point at SI approximate to 45%. Residue hydrophobicity is a feature governing residue substitution as SI >= 45%. Whereas below this SI level, residue volume is a dominant feature. (C) 2007 Elsevier B.V. All rights reserved.

Features of the supercritical transition in the wake of a circular cylinder

The features of the wake behind a uniform circular cylinder at Re = 200, which is just beyond the critical Reynolds number of 3-D transition, are investigated in detail by direct numerical simulations by solving 3-D incompressible Navier-Stokes equations using mixed spectral-spectral-element method. The high-order splitting algorithm based on the mixed stiffly stable scheme is employed in the time discretization. Due to the nonlinear evolution of the secondary instability of the wake, the spanwise modes with different wavelengths emerge. The spanwise characteristic length determines the transition features and global properties of the wake. The existence of the spanwise phase difference of the primary vortices shedding is confirmed by Fourier analysis of the time series of the spanwise vorticity and attributed. to the dominant spanwise mode. The spatial energy distributions of various modes and the velocity profiles in the near wake are obtained. The numerical results indicate that the near wake is in 3-D quasi-periodic laminar state with transitional behaviors at this supercritical Reynolds number.