Physical enhancement of transdermal drug application: is delivery technology keeping up with pharmaceutical development?

Advances in molecular biology have given us a wide range of protein and peptide-based drugs that are unsuitable for oral delivery because of their high degree of first-pass metabolism. Though parenteral delivery is the obvious answer, for the successful development of commercial chronic and self-administration usage formulations it is not the ideal choice. Transdermal delivery is emerging as the biggest application target for these agents, however, the skin is extremely efficient at keeping out such large molecular weight compounds and therapeutic levels are never going to be realistically achieved by passive absorption. Physical enhancement mechanisms including: iontophoresis, electroporation, ultrasound, photomechanical waves, microneedles and jet-propelled particles are emerging as solutions to this topical delivery dilemma. Adding proteins and peptides to the list of other large molecular weight drugs with insufficient passive transdermal fluxes to be therapeutically useful, we have a collection of pharmacological agents waiting for efficient delivery methods to be introduced. This article reviews the current state of physical transdermal delivery technology, assesses the pros and cons of each technique and summarises the evidence-base of their drug delivery capabilities.

Collection, seminal characteristics and chilled storage of spermatozoa from three species of free-range flying fox (Pteropus spp.)

This study reports observations on the collection and characteristics of semen from free-range populations of flying fox in Brisbane, Australia. Semen was successfully recovered by electroejaculation from 107 of 115 wild flying foxes (Pteropus alecto, Pteropus poliocephalus and Pteropus scapulatus). A proportion of ejaculates collected from all three species contained seminal vesicle secretions, the incidence of which appeared related to breeding season. Ejaculate volume was small (5-160 mu L), requiring a specialised collection vessel and immediate extension to avoid desiccation. Sperm morphological abnormalities and characteristics are described for the first time. In two species (P. scapulatus and P. alecto), sperm quality varied with breeding season. Dilution in Tris-citratefructose buffer and subsequent incubation (37 degrees C) of Pteropus semen for 2-3 h appeared to have a negative impact on sperm motility and the percentage of sperm with intact plasma membranes and acrosomes and represents a concern for the potential development and use of assisted breeding technology in these species. Preliminary attempts to develop a short-term chilled preservation protocol for flying fox semen revealed that spenn viability (percentage motility and percentage live sperm with intact acrosomes) was significantly reduced after 102 h chilled storage at 5 degrees C; nevertheless, approximately 40% of the spermatozoa were still motile and contained intact acrosomes. Glycerol was neither protective nor detrimental to sperm survival during chilled storage. Microbial flora of the prepuce, urethra and semen of all species were isolated and their antibiotic susceptibility tested. Tetracycline, penicillin, ciprofloxacin, and ceftazidime were the most effective antibiotics in preventing growth of all identified bacteria; however, their effects on sperm survival were not investigated. (c) 2005 Elsevier Inc. All rights reserved.

Determinants in the development of advanced nursing practice: a case study of primary-care settings in Hong Kong

Different factors have been shown to influence the development of models of advanced nursing practice (ANP) in primary-care settings. Although ANP is being developed in hospitals in Hong Kong, China, it remains undeveloped in primary care and little is known about the factors determining the development of such a model. The aims of the present study were to investigate the contribution of different models of nursing practice to the care provided in primary-care settings in Hong Kong, and to examine the determinants influencing the development of a model of ANP in such settings. A multiple case study design was selected using both qualitative and quantitative methods of data collection. Sampling methods reflected the population groups and stage of the case study. Sampling included a total population of 41 nurses from whom a secondary volunteer sample was drawn for face-to-face interviews. In each case study, a convenience sample of 70 patients were recruited, from whom 10 were selected purposively for a semi-structured telephone interview. An opportunistic sample of healthcare professionals was also selected. The within-case and cross-case analysis demonstrated four major determinants influencing the development of ANP: (1) current models of nursing practice; (2) the use of skills mix; (3) the perceived contribution of ANP to patient care; and (4) patients' expectations of care. The level of autonomy of individual nurses was considered particularly important. These determinants were used to develop a model of ANP for a primary-care setting. In conclusion, although the findings highlight the complexity determining the development and implementation of ANP in primary care, the proposed model suggests that definitions of advanced practice are appropriate to a range of practice models and cultural settings. However, the findings highlight the importance of assessing the effectiveness of such models in terms of cost and long-term patient outcomes.

Reflections on the development and implementation of an early warning system for ecstasy and related drug markets in Australia

Regular and systematic monitoring of drug markets provides the basis for evidence-based policy. In Australia, trends in ecstasy and related drug (ERD) markets have been monitored in selected jurisdictions since 2000 and nationally since 2003, by the Party Drugs Initiative (PDI). The PDI maximises the validity of conclusions by triangulating information from (a) interviews with regular ecstasy users (REU), (b) interviews with key experts and (c) indicator data. There is currently no other system in Australia for monitoring these markets systematically; however, the value of the PDI has been constrained by the quality of available data. Difficulties in recruiting and interviewing appropriate consumers (REU) and key experts have been experienced, but largely overcome. Limitations of available indicator data from both health and law enforcement continue to present challenges and there remains considerable scope for enhancing existing routine data collection systems, to facilitate monitoring of ERD markets. With an expanding market for ecstasy and related drugs in Australia, and in the context of indicator data that continue to be limited in scope and detail, there is a strong argument for the continued collection of annual, comparable data from a sentinel group of REU, such as those recruited for the PDI.

Mirror neurons in the tree of life, development and evolution of sensorimotor matching responses

Mirror neurons in the tree of life rappresenta lo sviluppo e l' evoluzione del sistema dei neuroni specchio nei primati umani, non - umani e di alcune specie di uccelli, utilizzando metodi cooptati dalla filosofia della biologia e la biologia teorica, per integrare dati relativi al sistema nervoso e al comportamento delle specie in esame.

Design and development of agent-based procurement system to enhance business intelligence

The purpose of this research is to propose a procurement system across other disciplines and retrieved information with relevant parties so as to have a better co-ordination between supply and demand sides. This paper demonstrates how to analyze the data with an agent-based procurement system (APS) to re-engineer and improve the existing procurement process. The intelligence agents take the responsibility of searching the potential suppliers, negotiation with the short-listed suppliers and evaluating the performance of suppliers based on the selection criteria with mathematical model. Manufacturing firms and trading companies spend more than half of their sales dollar in the purchase of raw material and components. Efficient data collection with high accuracy is one of the key success factors to generate quality procurement which is to purchasing right material at right quality from right suppliers. In general, the enterprises spend a significant amount of resources on data collection and storage, but too little on facilitating data analysis and sharing. To validate the feasibility of the approach, a case study on a manufacturing small and medium-sized enterprise (SME) has been conducted. APS supports the data and information analyzing technique to facilitate the decision making such that the agent can enhance the negotiation and suppler evaluation efficiency by saving time and cost.

The development and optimisation of a fast pyrolysis process for bio-oil production

A two-tier study is presented in this thesis. The first involves the commissioning of an extant but at the time, unproven bubbling fluidised bed fast pyrolysis unit. The unit was designed for an intended nominal throughput of 300 g/h of biomass. The unit came complete with solids separation, pyrolysis vapour quenching and oil collection systems. Modifications were carried out on various sections of the system including the reactor heating, quenching and liquid collection systems. The modifications allowed for fast pyrolysis experiments to be carried out at the appropriate temperatures. Bio-oil was generated using conventional biomass feedstocks including Willow, beechwood, Pine and Miscanthus. Results from this phase of the research showed however, that although the rig was capable of processing biomass to bio-oil, it was characterised by low mass balance closures and recurrent operational problems. The problems included blockages, poor reactor hydrodynamics and reduced organic liquid yields. The less than optimal performance of individual sections, particularly the feed and reactor systems of the rig, culminated in a poor overall performance of the system. The second phase of this research involved the redesign of two key components of the unit. An alternative feeding system was commissioned for the unit. The feed system included an off the shelf gravimetric system for accurate metering and efficient delivery of biomass. Similarly, a new bubbling fluidised bed reactor with an intended nominal throughput of 500g/h of biomass was designed and constructed. The design leveraged on experience from the initial commissioning phase with proven kinetic and hydrodynamic studies. These units were commissioned as part of the optimisation phase of the study. Also as part of this study, two varieties each, of previously unreported feedstocks namely Jatropha curcas and Moringa olifiera oil seed press cakes were characterised to determine their suitability as feedstocks for liquid fuel production via fast pyrolysis. Consequently, the feedstocks were used for the production of pyrolysis liquids. The quality of the pyrolysis liquids from the feedstocks were then investigated via a number of analytical techniques. The oils from the press cakes showed high levels of stability and reduced pH values. The improvements to the design of the fast pyrolysis unit led to higher mass balance closures and increased organic liquid yields. The maximum liquid yield obtained from the press cakes was from African Jatropha press cake at 66 wt% on a dry basis.

Design, modeling and construction of a novel ablative fast pyrolysis reactor and product collection system

The objective of this work was to design, construct and commission a new ablative pyrolysis reactor and a high efficiency product collection system. The reactor was to have a nominal throughput of 10 kg/11r of dry biomass and be inherently scalable up to an industrial scale application of 10 tones/hr. The whole process consists of a bladed ablative pyrolysis reactor, two high efficiency cyclones for char removal and a disk and doughnut quench column combined with a wet walled electrostatic precipitator, which is directly mounted on top, for liquids collection. In order to aid design and scale-up calculations, detailed mathematical modelling was undertaken of the reaction system enabling sizes, efficiencies and operating conditions to be determined. Specifically, a modular approach was taken due to the iterative nature of some of the design methodologies, with the output from one module being the input to the next. Separate modules were developed for the determination of the biomass ablation rate, specification of the reactor capacity, cyclone design, quench column design and electrostatic precipitator design. These models enabled a rigorous design protocol to be developed capable of specifying the required reactor and product collection system size for specified biomass throughputs, operating conditions and collection efficiencies. The reactor proved capable of generating an ablation rate of 0.63 mm/s for pine wood at a temperature of 525 'DC with a relative velocity between the heated surface and reacting biomass particle of 12.1 m/s. The reactor achieved a maximum throughput of 2.3 kg/hr, which was the maximum the biomass feeder could supply. The reactor is capable of being operated at a far higher throughput but this would require a new feeder and drive motor to be purchased. Modelling showed that the reactor is capable of achieving a reactor throughput of approximately 30 kg/hr. This is an area that should be considered for the future as the reactor is currently operating well below its theoretical maximum. Calculations show that the current product collection system could operate efficiently up to a maximum feed rate of 10 kg/Fir, provided the inert gas supply was adjusted accordingly to keep the vapour residence time in the electrostatic precipitator above one second. Operation above 10 kg/hr would require some modifications to the product collection system. Eight experimental runs were documented and considered successful, more were attempted but due to equipment failure had to be abandoned. This does not detract from the fact that the reactor and product collection system design was extremely efficient. The maximum total liquid yield was 64.9 % liquid yields on a dry wood fed basis. It is considered that the liquid yield would have been higher had there been sufficient development time to overcome certain operational difficulties and if longer operating runs had been attempted to offset product losses occurring due to the difficulties in collecting all available product from a large scale collection unit. The liquids collection system was highly efficient and modeling determined a liquid collection efficiency of above 99% on a mass basis. This was validated due to the fact that a dry ice/acetone condenser and a cotton wool filter downstream of the collection unit enabled mass measurements of the amount of condensable product exiting the product collection unit. This showed that the collection efficiency was in excess of 99% on a mass basis.

Development of an e-business selection framework for manufacturing SMEs : a study of the printing industry

The aim of the research is to develop an e-business selection framework for small and medium enterprises (SMEs) by integrating established techniques in planning. The research is case based, comprising four case studies carried out in the printing industry for the purpose of evaluating the framework. Two of the companies are from Singapore, while the other two are from Guangzhou, China and Jinan, China respectively. To determine the need of an e-business selection framework for SMEs, extensive literature reviews were carried out in the area of e-business, business planning frameworks, SMEs and the printing industry. An e-business selection framework is then proposed by integrating the three established techniques of the Balanced Scorecard (BSC), Value Chain Analysis (VCA) and Quality Function Deployment (QFD). The newly developed selection framework is pilot tested using a published case study before actual evaluation is carried out in four case study companies. The case study methodology was chosen because of its ability to integrate diverse data collection techniques required to generate the BSC, VCA and QFD for the selection framework. The findings of the case studies revealed that the three techniques of BSC, VCA and QFD can be integrated seamlessly to complement on each other’s strengths in e-business planning. The eight-step methodology of the selection framework can provide SMEs with a step-by-step approach to e-business through structured planning. Also, the project has also provided better understanding and deeper insights into SMEs in the printing industry.

The development of a solar wall module using a selective surface

A need was indicated for the identification of a possible new solar energy product to improve the sales potential of a metal film with a selective surface, manufactured by the industriaI sponsor of this project (INCO). A possible way of overcoming the disadvantageous economics of solar energy collection was identified. This utilised the collection of solar energy by the walls of buildings constructed in such a manner as to allow the transfer of energy into the building, whilst providing adequate thermal insulation in the absence of sunlight. The actual collection element of the wall, being metallic, is also capable of performing the function of a low temperature heating .system in the absence of sunlight. As a result of this, the proposed system, by displacing both the wall and centraI heating system which would otherwise be necessary, demonstrates economic benefits over systems which are constructed solely for the purpose of collecting solar energy. The necessary thermodynamic and meteorological. characteristics and data: are established, and applied to a typical urban site in the North of England, for a typical average year, with and without a shading device incorporated into the construction. It is concluded that the proposed system may offer considerable benefit in reducing the effective heating season in all orientations of wall.

Sustainable development

The United Nations has pithily defined sustainable development as progress that ‘meets the needs of the present without compromising the ability of future generations to meet their own needs’. But sustainable development remains highly contested and is subject to a wide variety of interpretations, applications, and criticisms. Moreover, those seeking fully to understand this critical concept are confronted with a (sometimes dispiritingly) voluminous body of scholarly, polemical, and journalistic writing. Edited by the acclaimed author of Understanding Sustainable Development (Earthscan, 2008), this new title from Routledge’s Critical Concepts in the Environment series answers the need for an authoritative reference work to make sense of the vast literature on sustainable development, and the continuing explosion in research output. Drawing on a wide variety of sources that take full cognizance of the rich background and necessary adaptability of the concept to the imperatives of time, place, and culture, and which emphasize its connected and transdisciplinary nature, the editor has brought together in four volumes the canonical and the best cutting-edge work to produce an indispensable ‘mini library’. The collection covers the history, mediation, application, and likely future orientations of sustainable development, both conceptually and as a continually emerging practice. Sustainable Development is fully indexed and includes comprehensive introductions, newly written by the editor, which place the collected materials in their historical and intellectual context. It is an essential reference collection and is certain to be valued by scholars and students—as well as serious policy-makers and practitioners—as a vital one-stop research and pedagogic resource.

Development, Annotation and Protection of Digital Archive “Bulgarian Folklore Heritage”

The key to prosperity in today's world is access to digital content and skills to create new content. Investigations of folklore artifacts is the topic of this article, presenting research related to the national program „Knowledge Technologies for Creation of Digital Presentation and Significant Repositories of Folklore Heritage” (FolkKnow). FolkKnow aims to build a digital multimedia archive "Bulgarian Folklore Heritage” (BFH) and virtual information portal with folk media library of digitized multimedia objects from a selected collection of the fund of Institute of Ethnology and Folklore Studies with Ethnographic Museum (IEFSEM) of the Bulgarian Academy of Science (BAS). The realization of the project FolkKnow gives opportunity for wide social applications of the multimedia collections, for the purposes of Interactive distance learning/self-learning, research activities in the field of Bulgarian traditional culture and for the cultural and ethno-tourism. We study, analyze and implement techniques and methods for digitization of multimedia objects and their annotation. In the paper are discussed specifics approaches used to building and protect a digital archive with multimedia content. Tasks can be systematized in the following guidelines: * Digitization of the selected samples * Analysis of the objects in order to determine the metadata of selected artifacts from selected collections and problem areas * Digital multimedia archive * Socially-oriented applications and virtual exhibitions artery * Frequency dictionary tool for texts with folklore themes * A method of modern technologies of protecting intellectual property and copyrights on digital content developed for use in digital exposures.

Preserving Cultural Heritage Using Open Source Collection Management Tools

Open source software (OSS) popularity is growing steadily and many OSS systems could be used to preserve cultural heritage objects. Such solutions give the opportunity to organizations to afford the development of a digital collection. This paper focuses on reviewing two OSS tools, CollectionSpace and the Open Video Digital Library Toolkit and discuss on how these could be used for organizing digital replicas of cultural objects. The features of the software are presented and some examples are given.

The development and analysis of a field project model curriculum and its impact on achievement and attitude toward science and the environment with at-risk eleventh and twelfth grade students

This study was an evaluation of a Field Project Model Curriculum and its impact on achievement, attitude toward science, attitude toward the environment, self-concept, and academic self-concept with at-risk eleventh and twelfth grade students. One hundred eight students were pretested and posttested on the Piers-Harris Children's Self-Concept Scale, PHCSC (1985); the Self-Concept as a Learner Scale, SCAL (1978); the Marine Science Test, MST (1987); the Science Attitude Inventory, SAI (1970); and the Environmental Attitude Scale, EAS (1972). Using a stratified random design, three groups of students were randomly assigned according to sex and stanine level, to three treatment groups. Group one received the field project method, group two received the field study method, and group three received the field trip method. All three groups followed the marine biology course content as specified by Florida Student Performance Objectives and Frameworks. The intervention occurred for ten months with each group participating in outside-of-classroom activities on a trimonthly basis. Analysis of covariance procedures were used to determine treatment effects. F-ratios, p-levels and t-tests at p $<$.0062 (.05/8) indicated that a significant difference existed among the three treatment groups. Findings indicated that groups one and two were significantly different from group three with group one displaying significantly higher results than group two. There were no significant differences between males and females in performance on the five dependent variables. The tenets underlying environmental education are congruent with the recommendations toward the reform of science education. These include a value analysis approach, inquiry methods, and critical thinking strategies that are applied to environmental issues. ^

Implications of a theoretical framework on stress and burnout for the development of graduate nursing education curricula

This study had two purposes: (a) to develop a theoretical framework integrating and synthesizing findings of prior research regarding stress and burnout among critical care nurses (CCRNs), and (b) to validate the theoretical framework with an empirical study to assure a theory/research based teaching-learning process for graduate courses preparing nursing clinical specialists and administrators.^ The methods used to test the theoretical framework included: (a) adopting instruments with reported validity, (b) conducting a pilot study, (c) revising instruments using results of the pilot study and following concurrence of a panel of experts, and (d) establishing correlations within predetermined parameters. The reliability of the tool was determined through the use of Cronbach's Alpha Coefficient with a resulting range from.68 to.88 for all measures.^ The findings supported all the research hypotheses. Correlations were established at r =.23 for statistically significant alphas at the.01 level and r =.16 for alphas.05. The conclusions indicated three areas of strong correlation among the theoretical variables: (a) work environment stressor antecedents and specific stressor events were correlated significantly with subjective work stress and burnout; (b) subjective work stress (perceived work related stress) was a function of the work environment stressor antecedents and specific stressor events, and (c) emotional exhaustion, the first phase of burnout, was confirmed to be related to stressor antecedents and specific stressor events. This dimension was found to be a function of the work environment stressor antecedents, modified by the individual characteristics of work and non-work related social support, non-work daily stress, and the number of hours worked per week. The implications of the study for nursing graduate curricula, nursing practice and nursing education were discussed. Recommendations for further research were enumerated. ^