Performance measurement with multiple interrelated variables and threshold target levels:evidence from retail firms in the US

In this study, we developed a DEA-based performance measurement methodology that is consistent with performance assessment frameworks such as the Balanced Scorecard. The methodology developed in this paper takes into account the direct or inverse relationships that may exist among the dimensions of performance to construct appropriate production frontiers. The production frontiers we obtained are deemed appropriate as they consist solely of firms with desirable levels for all dimensions of performance. These levels should be at least equal to the critical values set by decision makers. The properties and advantages of our methodology against competing methodologies are presented through an application to a real-world case study from retail firms operating in the US. A comparative analysis between the new methodology and existing methodologies explains the failure of the existing approaches to define appropriate production frontiers when directly or inversely related dimensions of performance are present and to express the interrelationships between the dimensions of performance.

Modeling of CW Yb-doped fiber lasers with highly nonlinear cavity dynamics

We develop a theoretical framework for modeling of continuous wave Yb-doped fiber lasers with highly nonlinear cavity dynamics. The developed approach has shown good agreement between theoretical predictions and experimental results for particular scheme of Yb-doped laser with large spectral broadening during single round trip. The model is capable to accurately describe main features of the experimentally measured laser outputs such as power efficiency slope, power leakage through fibre Bragg gratings, spectral broadening and spectral shape of generated radiation. © 2011 Optical Society of America.

Effect of an inservice on the teachers' knowledge of general school law, Section 504, and the Meta Consent Decree

It is generally assumed by educators that inservice training will make a significant difference in teacher knowledge of topics related to education. This investigation addressed that assumption by examining the effects of various factors, e.g., amount and timing of inservice training, upon teacher knowledge of educational law. Of special interest was teacher knowledge of the law as it pertained to ethnic and other characteristics of students in urban school settings. This study was deliberately designed to determine which factors should be later investigated in a more deterministic form, e.g., an experimental design.^ The investigation built upon that of Ogletree (1985), Osborne (1996) and others who focused on the importance of teacher development as a method to enhance professional abilities. The main question addressed in this study was, "How knowledgeable are teachers of school law, especially with regard to general school law, the Meta Consent Decree and Section 504 of the Rehabilitation Act of 1973."^ The study participants (N = 302) were from the Dade County School System, the fourth largest in the U.S. The survey design (approved by the System), specified participants from all levels and types of schools and geographic representations. A survey instrument was created, pilot tested, revised and approved for use by the district official representatives. After administration of the instrument, the resultant data was treated by several appropriate tests, e.g., multivariate analysis of variance (ANOVA).^ Several findings emerged from the analysis of the data: in general, teachers did not have sufficient knowledge of school law; factors, such as amount and level of education, and status and position were positively correlated with increased knowledge; factors such as years of experience, gender, race and ethnicity were not correlated with higher levels of knowledge. The most significant, however, was that when teachers had participated in several inservice training experiences, typically workshops, and, when combined with other factors noted above, their knowledge of school law was significantly higher. Specific recommendations for future studies were made. ^

Towards simulation and emulation of large-scale computer networks

Developing analytical models that can accurately describe behaviors of Internet-scale networks is difficult. This is due, in part, to the heterogeneous structure, immense size and rapidly changing properties of today's networks. The lack of analytical models makes large-scale network simulation an indispensable tool for studying immense networks. However, large-scale network simulation has not been commonly used to study networks of Internet-scale. This can be attributed to three factors: 1) current large-scale network simulators are geared towards simulation research and not network research, 2) the memory required to execute an Internet-scale model is exorbitant, and 3) large-scale network models are difficult to validate. This dissertation tackles each of these problems. ^ First, this work presents a method for automatically enabling real-time interaction, monitoring, and control of large-scale network models. Network researchers need tools that allow them to focus on creating realistic models and conducting experiments. However, this should not increase the complexity of developing a large-scale network simulator. This work presents a systematic approach to separating the concerns of running large-scale network models on parallel computers and the user facing concerns of configuring and interacting with large-scale network models. ^ Second, this work deals with reducing memory consumption of network models. As network models become larger, so does the amount of memory needed to simulate them. This work presents a comprehensive approach to exploiting structural duplications in network models to dramatically reduce the memory required to execute large-scale network experiments. ^ Lastly, this work addresses the issue of validating large-scale simulations by integrating real protocols and applications into the simulation. With an emulation extension, a network simulator operating in real-time can run together with real-world distributed applications and services. As such, real-time network simulation not only alleviates the burden of developing separate models for applications in simulation, but as real systems are included in the network model, it also increases the confidence level of network simulation. This work presents a scalable and flexible framework to integrate real-world applications with real-time simulation.^

HomeBank: An Online Repository of Daylong Child-Centered Audio Recordings.

HomeBank is introduced here. It is a public, permanent, extensible, online database of daylong audio recorded in naturalistic environments. HomeBank serves two primary purposes. First, it is a repository for raw audio and associated files: one database requires special permissions, and another redacted database allows unrestricted public access. Associated files include metadata such as participant demographics and clinical diagnostics, automated annotations, and human-generated transcriptions and annotations. Many recordings use the child-perspective LENA recorders (LENA Research Foundation, Boulder, Colorado, United States), but various recordings and metadata can be accommodated. The HomeBank database can have both vetted and unvetted recordings, with different levels of accessibility. Additionally, HomeBank is an open repository for processing and analysis tools for HomeBank or similar data sets. HomeBank is flexible for users and contributors, making primary data available to researchers, especially those in child development, linguistics, and audio engineering. HomeBank facilitates researchers' access to large-scale data and tools, linking the acoustic, auditory, and linguistic characteristics of children's environments with a variety of variables including socioeconomic status, family characteristics, language trajectories, and disorders. Automated processing applied to daylong home audio recordings is now becoming widely used in early intervention initiatives, helping parents to provide richer speech input to at-risk children.

Vitamin D, d-dimer, Interferon γ, and sCD14 Levels are Independently Associated with Immune Reconstitution Inflammatory Syndrome: A Prospective, International Study

© 2015.To determine the immunological profile most important for IRIS prediction, we evaluated 20 baseline plasma biomarkers in Acquired Immunodeficiency Syndrome (AIDS) patients initiating antiretroviral therapy (ART). Patients were enrolled in a randomized, placebo-controlled ART initiation trial in South Africa and Mexico to test whether maraviroc could prevent IRIS. Participants were classified prospectively as having IRIS within 6. months of ART initiation. Twenty plasma biomarkers were measured at study enrollment for 267 participants. Biomarkers were tested for predicting IRIS with adjustment for covariates chosen through forward stepwise selection. Sixty-two participants developed IRIS and of these 21 were tuberculosis (TB)-IRIS. Baseline levels of vitamin D and higher d-dimer, interferon gamma (IFNγ), and sCD14 were independently associated with risk of IRIS in multivariate analyses. TB-IRIS cases exhibited a distinct biosignature from IRIS related to other pathogens, with increased levels of C-reactive protein (CRP), sCD14, IFNγ, and lower levels of Hb that could be captured by a composite risk score. Elevated markers of Type 1 T helper (Th1) response, monocyte activation, coagulation and low vitamin D were independently associated with IRIS risk. Interventions that decrease immune activation and increase vitamin D levels warrant further study.

Linking environmental variables with regional- scale variability in ecological structure and standing stock of carbon within UK kelp forests

Kelp forests represent some of the most productive and diverse habitats on Earth. Understanding drivers of ecological patterns at large spatial scales is critical for effective management and conservation of marine habitats. We surveyed kelp forests dominated by Laminaria hyperborea (Gunnerus) Foslie 1884 across 9° latitude and >1000 km of coastline and measured a number of physical parameters at multiple scales to link ecological structure and standing stock of carbon with environmental variables. Kelp density, biomass, morphology and age were generally greater in exposed sites within regions, highlighting the importance of wave exposure in structuring L. hyperborea populations. At the regional scale, wave-exposed kelp canopies in the cooler regions (the north and west of Scotland) were greater in biomass, height and age than in warmer regions (southwest Wales and England). The range and maximal values of estimated standing stock of carbon contained within kelp forests was greater than in historical studies, suggesting that this ecosystem property may have been previously undervalued. Kelp canopy density was positively correlated with large-scale wave fetch and fine-scale water motion, whereas kelp canopy biomass and the standing stock of carbon were positively correlated with large-scale wave fetch and light levels and negatively correlated with temperature. As light availability and summer temperature were important drivers of kelp forest biomass, effective management of human activities that may affect coastal water quality is necessary to maintain ecosystem functioning, while increased temperatures related to anthropogenic climate change may impact the structure of kelp forests and the ecosystem services they provide.

Linking environmental variables with regional- scale variability in ecological structure and standing stock of carbon within UK kelp forests

Kelp forests represent some of the most productive and diverse habitats on Earth. Understanding drivers of ecological patterns at large spatial scales is critical for effective management and conservation of marine habitats. We surveyed kelp forests dominated by Laminaria hyperborea (Gunnerus) Foslie 1884 across 9° latitude and >1000 km of coastline and measured a number of physical parameters at multiple scales to link ecological structure and standing stock of carbon with environmental variables. Kelp density, biomass, morphology and age were generally greater in exposed sites within regions, highlighting the importance of wave exposure in structuring L. hyperborea populations. At the regional scale, wave-exposed kelp canopies in the cooler regions (the north and west of Scotland) were greater in biomass, height and age than in warmer regions (southwest Wales and England). The range and maximal values of estimated standing stock of carbon contained within kelp forests was greater than in historical studies, suggesting that this ecosystem property may have been previously undervalued. Kelp canopy density was positively correlated with large-scale wave fetch and fine-scale water motion, whereas kelp canopy biomass and the standing stock of carbon were positively correlated with large-scale wave fetch and light levels and negatively correlated with temperature. As light availability and summer temperature were important drivers of kelp forest biomass, effective management of human activities that may affect coastal water quality is necessary to maintain ecosystem functioning, while increased temperatures related to anthropogenic climate change may impact the structure of kelp forests and the ecosystem services they provide.

A novel methodology for analysis of large scale interconnected power and gas systems

The European Union continues to exert a large influence on the direction of member states energy policy. The 2020 targets for renewable energy integration have had significant impact on the operation of current power systems, forcing a rapid change from fossil fuel dominated systems to those with high levels of renewable power. Additionally, the overarching aim of an internal energy market throughout Europe has and will continue to place importance on multi-jurisdictional co-operation regarding energy supply. Combining these renewable energy and multi-jurisdictional supply goals results in a complicated multi-vector energy system, where the understanding of interactions between fossil fuels, renewable energy, interconnection and economic power system operation is increasingly important. This paper provides a novel and systematic methodology to fully understand the changing dynamics of interconnected energy systems from a gas and power perspective. A fully realistic unit commitment and economic dispatch model of the 2030 power systems in Great Britain and Ireland, combined with a representative gas transmission energy flow model is developed. The importance of multi-jurisdictional integrated energy system operation in one of the most strategically important renewable energy regions is demonstrated.

Effets des procédés d’usinage de finition sur les propriétés de surface, la performance d’un vernis et l’émission de poussières du bois de chêne rouge

La performance d’un produit de finition sur le bois est influencée par la manière dont la surface est préparée. Le ponçage est très utilisé pour préparer les surfaces lors de la finition. Toutefois, ce procédé génère une grande quantité de poussières. Ainsi, les effets des procédés d’usinage sur les propriétés de surface, la performance d’un vernis et l’émission de poussières ont été étudiés dans le but de déterminer les modes de préparation des surfaces les plus adéquats pour le bois de chêne rouge. Dans un premier volet, les propriétés de surface et la performance d’un vernis ont été évaluées sur les surfaces préparées à l’aide du procédé traditionnel de ponçage et de trois procédés alternatifs de rabotage soit la coupe périphérique droite, la coupe hélicoïdale et la coupe oblique. La qualité de surface a été évaluée au moyen des caractéristiques de rugosité, d’endommagement cellulaire et de mouillabilité. Des essais de résistance à l’adhésion d’un vernis d’usage intérieur ont été effectués avant et après un traitement de vieillissement accéléré. Les résultats ont montré que le ponçage a induit une rugosité et un niveau de fibrillation supérieurs à ceux des autres procédés, ainsi qu’une mouillabilité et une adhésion du vernis après vieillissement accéléré élevées. Les surfaces rabotées avec la coupe périphérique droite ont présenté un certain niveau de fibrillation, une rugosité et une mouillabilité intermédiaires. Néanmoins, l’adhésion du vernis après vieillissement a été également inférieure par rapport aux autres procédés. La coupe hélicoïdale a produit une rugosité intermédiaire. D’autre part, la coupe oblique a été le procédé qui a présenté une perte d’adhésion après vieillissement similaire au ponçage. Ce procédé a généré des surfaces lisses avec rugosité et mouillabilité intermédiaires. Sur la base des résultats obtenus, le ponçage à l’aide d’un programme P100-grain et une vitesse d’avance de 7 m/min, la coupe périphérique droite avec un angle d’attaque de 25° et une onde d’usinage de 1,0 mm, la coupe hélicoïdale avec une onde d’usinage de 1,0 mm et la coupe oblique realisé avec un angle oblique de 15° ont permis d’obtenir les meilleures conditions d’usinage pour chaque procédé. Dans un deuxième volet, l’effet de différents paramètres de coupe sur l’émission de poussières et la rugosité de la surface a été étudié lors de la coupe hélicoïdale. Les émissions de poussières ont diminué avec la diminution de laprofondeur de coupe et l’augmentation de l’épaisseur moyenne du copeau. Cependant, les surfaces obtenues avec l’épaisseur moyenne du copeau plus élevée ont présenté une rugosité supérieure. Par contre, si une surface plus lisse est requise, une vitesse d’avance intermédiaire doit être utilisée afin de diminuer la rugosité des surfaces sans exposer les travailleurs à des niveaux élevés de poussière de bois. Par ailleurs, l’émission de poussières pour chaque fraction de particules peut être estimée à travers les modèles développés.

Towards the systematic simplification of mechanistic models

Mechanistic models used for prediction should be parsimonious, as models which are over-parameterised may have poor predictive performance. Determining whether a model is parsimonious requires comparisons with alternative model formulations with differing levels of complexity. However, creating alternative formulations for large mechanistic models is often problematic, and usually time-consuming. Consequently, few are ever investigated. In this paper, we present an approach which rapidly generates reduced model formulations by replacing a model’s variables with constants. These reduced alternatives can be compared to the original model, using data based model selection criteria, to assist in the identification of potentially unnecessary model complexity, and thereby inform reformulation of the model. To illustrate the approach, we present its application to a published radiocaesium plant-uptake model, which predicts uptake on the basis of soil characteristics (e.g. pH, organic matter content, clay content). A total of 1024 reduced model formulations were generated, and ranked according to five model selection criteria: Residual Sum of Squares (RSS), AICc, BIC, MDL and ICOMP. The lowest scores for RSS and AICc occurred for the same reduced model in which pH dependent model components were replaced. The lowest scores for BIC, MDL and ICOMP occurred for a further reduced model in which model components related to the distinction between adsorption on clay and organic surfaces were replaced. Both these reduced models had a lower RSS for the parameterisation dataset than the original model. As a test of their predictive performance, the original model and the two reduced models outlined above were used to predict an independent dataset. The reduced models have lower prediction sums of squares than the original model, suggesting that the latter may be overfitted. The approach presented has the potential to inform model development by rapidly creating a class of alternative model formulations, which can be compared.

Spatial and Functional Organization of Pig Trade in Different European Production Systems: Implications for Disease Prevention and Control

Understanding the complexity of live pig trade organization is a key factor to predict and control major infectious diseases, such as classical swine fever (CSF) or African swine fever (ASF). Whereas the organization of pig trade has been described in several European countries with indoor commercial production systems, little information is available on this organization in other systems, such as outdoor or small-scale systems. The objective of this study was to describe and compare the spatial and functional organization of live pig trade in different European countries and different production systems. Data on premise characteristics and pig movements between premises were collected during 2011 from Bulgaria, France, Italy, and Spain, which swine industry is representative of most of the production systems in Europe (i.e., commercial vs. small-scale and outdoor vs. indoor). Trade communities were identified in each country using the Walktrap algorithm. Several descriptive and network metrics were generated at country and community levels. Pig trade organization showed heterogeneous spatial and functional organization. Trade communities mostly composed of indoor commercial premises were identified in western France, northern Italy, northern Spain, and north-western Bulgaria. They covered large distances, overlapped in space, demonstrated both scale-free and small-world properties, with a role of trade operators and multipliers as key premises. Trade communities involving outdoor commercial premises were identified in western Spain, south-western and central France. They were more spatially clustered, demonstrated scale-free properties, with multipliers as key premises. Small-scale communities involved the majority of premises in Bulgaria and in central and Southern Italy. They were spatially clustered and had scale-free properties, with key premises usually being commercial production premises. These results indicate that a disease might spread very differently according to the production system and that key premises could be targeted to more cost-effectively control diseases. This study provides useful epidemiological information and parameters that could be used to design risk-based surveillance strategies or to more accurately model the risk of introduction or spread of devastating swine diseases, such as ASF, CSF, or foot-and-mouth disease.

Genomics to elucidate the molecular basis of calcific aortic valve disease

Le rétrécissement valvulaire aortique (RVA) est causé par une calcification et une fibrose progressive de la valve aortique. Le risque de développer la maladie augmente avec l’âge. À cause de l’augmentation de l’espérance de vie, le RVA est devenu un problème de santé publique. Le RVA est fatal en absence de traitement médical. Actuellement, la chirurgie est le seul traitement pour le stade sévère de la maladie, mais près de 50% des individus avec RVA n’y sont pas éligibles, principalement due à la présence de comorbidités. Plusieurs processus biologiques ont été associés à la maladie, mais les voies moléculaires spécifiques et les gènes impliqués dans le développement et la progression du RVA ne sont pas connus. Il est donc urgent de découvrir les gènes de susceptibilité pour le RVA afin d’identifier les personnes à risque ainsi que les biomarqueurs et les cibles thérapeutiques pouvant mener au développement de médicaments pour inverser ou limiter la progression de la maladie. L’objectif de cette thèse de doctorat était d’identifier la base moléculaire du RVA. Des approches modernes en génomique, incluant l’étude de gènes candidats et le criblage génomique par association (GWAS), ont été réalisées à l’aide de collections d’ADN provenant d’un grand nombre de patients bien caractérisés pour le RVA. Des études complémentaires en transciptomique ont comparé le profil d’expression global des gènes entre des valves calcifiées et non-calcifiées à l’aide de biopuces à ADN et de séquençage de l’ARN. Une première étude a identifié des variations dans le gène NOTCH1 et suggère pour la première fois la présence d’un polymorphisme commun dans ce gène conférant une susceptibilité au RVA. La deuxième étude a combiné par méta-analyse deux GWAS de patients provenant de la ville de Québec et Paris (France) aux données transcriptomiques. Cette étude de génomique intégrative a confirmé le rôle de RUNX2 dans le RVA et a permis l’identification d’un nouveau gène de susceptibilité, CACNA1C. Les troisième et quatrième études sur l’expression des gènes ont permis de mieux comprendre les bases moléculaires de la calcification des valves aortiques bicuspides et ainsi d’identifier de nouvelles cibles thérapeutiques pour le RVA. Les données générées par ce projet sont la base de futures découvertes importantes qui permettront d’améliorer les options de traitement et la qualité de vie des patients atteints du RVA.

Percurso profissional. Destaque para a análise da produção de resíduos urbanos no Alentejo Central - portugal e utilização do modelo DEA na definição da meta da recolha seletiva

Neste trabalho de Projeto efetua-se o desenvolvimento do tema da produção de Resíduos Urbanos (RU) no Alentejo Central, utilizando-se o modelo DEA (Data Envelopment Analysis) para a análise das metas da recolha seletiva estabelecidas para 2020. Genericamente, quanto maior é o grau de desenvolvimento económico de um território, maior é a taxa de urbanização e maior é também a quantidade de resíduos urbanos produzidos por habitante. O rendimento e a urbanização são variáveis altamente correlacionadas, quando aumenta o rendimento disponível e os padrões de vida, aumenta também o consumo de bens e serviços de modo correspondente, o que leva ao aumento da quantidade de resíduos gerados. Assim, tendo em conta os impactos locais que os RU abandonados trazem, e com o objetivo de quebrar o elo entre crescimento económico e os impactos ambientais associados à produção de resíduos, são implementadas, nos países com elevados níveis de desenvolvimento, políticas baseadas em modelos integrados de gestão de RU que permitem a recuperação, reciclagem e valorização dos materiais, reservando-se a eliminação (deposição em aterro) para frações não valorizáveis, o que gera empregos e riqueza. Em Portugal vigora o Plano Estratégico para os Resíduos Urbanos (PERSU 2020) que define objetivos e metas nacionais, nomeadamente a meta da recolha seletiva, estabelecendo para 2020 um quantitativo nacional mínimo a recuperar de 47 kg por habitante por ano. Deste modo, importa caracterizar, para o período de 2002 a 2012, como evoluiu a produção de RU em comparação com a evolução do PIB em Portugal. A análise foca-se então na produção de RU na região do Alentejo em particular no Alentejo Central que evidencia um elevado nível per capita em comparação com o resto do país, situando-se mesmo acima das regiões do grande Porto e Lisboa. São apresentadas possíveis razões para o registo destes elevados níveis de produção de RU não se conseguindo, no entanto, avançar com evidências. Como o modelo DEA é utilizado no PERSU 2020 para fundamentar a projeção das metas da recolha seletiva por sistema de gestão de resíduos urbanos, fez-se a sua reprodução, o que permitiu uma análise mais detalhada dos dados e o ensaio de novos resultados considerando, para além do nível de produção de RU, o numero de equipamentos de deposição de recolha seletiva como input do modelo; Abstract: Title of the report: Professional career. Emphasis on the analysis of urban waste production in Alentejo Central - Portugal and the use of the DEA in defining the separate collection target This professional report presents the theme of the Urban Waste (UW) production in Central Alentejo, using the DEA (Data Envelopment Analysis) to analyse the target set for selective collection in 2020. Generally, the higher the degree of economic development of a region, the greater the rate of urbanization and the greater also the amount of municipal waste produced per capita. The variables income and urbanization are highly correlated, if you have an increase in the disposable income and living standards, the consumption of goods and services will increase accordingly, which leads to the increase of the amount of produced waste. Thus, taking into account the local impact that the abandoned UW brings, and in order to break the link between economic growth and the environmental impacts associated with the production of waste, countries with high levels of development implement policies based on integrated UW management models that allow the recovery, recycling and valorisation of materials, restricting the disposal (landfill) to non-recoverable fractions, which creates jobs and wealth. Portugal established a national strategic plan for Urban Waste (PERSU 2020) which defines the goals and national targets, including the selective collection target stating for 2020 a minimum recover of 47 kg per capita per year. Then it is relevant to characterize and compare the evolution of UW production and GDP in Portugal for the period 2002 to 2012. The analysis then focuses on the production of UW in Alentejo, particularly in Central Alentejo region, which shows a high per capita level compared to the rest of the country, placed just above the Greater Porto and Lisbon region. Then we explore several possible reasons for this high level of UW production in this region, but none is successful in producing strong evidence. As the DEA is used in PERSU 2020 to support the projection of the selective collection targets for the municipal waste management systems, in this report we develop the model, which allowed access to the data and a more detailed analyse. Then we introduce and test a new input, the number of separate collection deposition equipment, which gives new results that are compared with the original ones.

A finite-strain solid–shell using local Löwdin frames and least-squares strains

A finite-strain solid–shell element is proposed. It is based on least-squares in-plane assumed strains, assumed natural transverse shear and normal strains. The singular value decomposition (SVD) is used to define local (integration-point) orthogonal frames-of-reference solely from the Jacobian matrix. The complete finite-strain formulation is derived and tested. Assumed strains obtained from least-squares fitting are an alternative to the enhanced-assumed-strain (EAS) formulations and, in contrast with these, the result is an element satisfying the Patch test. There are no additional degrees-of-freedom, as it is the case with the enhanced-assumed-strain case, even by means of static condensation. Least-squares fitting produces invariant finite strain elements which are shear-locking free and amenable to be incorporated in large-scale codes. With that goal, we use automatically generated code produced by AceGen and Mathematica. All benchmarks show excellent results, similar to the best available shell and hybrid solid elements with significantly lower computational cost.