Damage identification from power spectrum density transmissibility

Damage identification under real operating conditions of the structure during its daily use would be suitable and attractive to civil engineers due to the difficulty and problems of carrying out controlled forced excitation tests on this kind of structures. In this case, output-only response measurements would be available, and an output-only damage identification procedure should be implemented. Transmissibility, defined on an output-to-output relationship, is getting increased attention in damage detection applications because of its dependence with output-only data and its sensitivity to local structural changes. In this paper, a method based on the power spectrum density transmissibility (PSDT) is proposed to detect structural damage.

Low Work-Function Thermionic Emission and Orbital-Motion-Limited Ion Collection at Bare-Tether Cathodic Contact

Una amarra electrodinámica (electrodynamic tether) opera sobre principios electromagnéticos intercambiando momento con la magnetosfera planetaria e interactuando con su ionosfera. Es un subsistema pasivo fiable para desorbitar etapas de cohetes agotadas y satélites al final de su misión, mitigando el crecimiento de la basura espacial. Una amarra sin aislamiento captura electrones del plasma ambiente a lo largo de su segmento polarizado positivamente, el cual puede alcanzar varios kilómetros de longitud, mientras que emite electrones de vuelta al plasma mediante un contactor de plasma activo de baja impedancia en su extremo catódico, tal como un cátodo hueco (hollow cathode). En ausencia de un contactor catódico activo, la corriente que circula por una amarra desnuda en órbita es nula en ambos extremos de la amarra y se dice que ésta está flotando eléctricamente. Para emisión termoiónica despreciable y captura de corriente en condiciones limitadas por movimiento orbital (orbital-motion-limited, OML), el cociente entre las longitudes de los segmentos anódico y catódico es muy pequeño debido a la disparidad de masas entre iones y electrones. Tal modo de operación resulta en una corriente media y fuerza de Lorentz bajas en la amarra, la cual es poco eficiente como dispositivo para desorbitar. El electride C12A7 : e−, que podría presentar una función de trabajo (work function) tan baja como W = 0.6 eV y un comportamiento estable a temperaturas relativamente altas, ha sido propuesto como recubrimiento para amarras desnudas. La emisión termoiónica a lo largo de un segmento así recubierto y bajo el calentamiento de la operación espacial, puede ser más eficiente que la captura iónica. En el modo más simple de fuerza de frenado, podría eliminar la necesidad de un contactor catódico activo y su correspondientes requisitos de alimentación de gas y subsistema de potencia, lo que resultaría en un sistema real de amarra “sin combustible”. Con este recubrimiento de bajo W, cada segmento elemental del segmento catódico de una amarra desnuda de kilómetros de longitud emitiría corriente como si fuese parte de una sonda cilíndrica, caliente y uniformemente polarizada al potencial local de la amarra. La operación es similar a la de una sonda de Langmuir 2D tanto en los segmentos catódico como anódico. Sin embargo, en presencia de emisión, los electrones emitidos resultan en carga espacial (space charge) negativa, la cual reduce el campo eléctrico que los acelera hacia fuera, o incluso puede desacelerarlos y hacerlos volver a la sonda. Se forma una doble vainas (double sheath) estable con electrones emitidos desde la sonda e iones provenientes del plasma ambiente. La densidad de corriente termoiónica, variando a lo largo del segmento catódico, podría seguir dos leyes distintas bajo diferentes condiciones: (i) la ley de corriente limitada por la carga espacial (space-charge-limited, SCL) o (ii) la ley de Richardson-Dushman (RDS). Se presenta un estudio preliminar sobre la corriente SCL frente a una sonda emisora usando la teoría de vainas (sheath) formada por la captura iónica en condiciones OML, y la corriente electrónica SCL entre los electrodos cilíndricos según Langmuir. El modelo, que incluye efectos óhmicos y el efecto de transición de emisión SCL a emisión RDS, proporciona los perfiles de corriente y potencial a lo largo de la longitud completa de la amarra. El análisis muestra que en el modo más simple de fuerza de frenado, bajo condiciones orbitales y de amarras típicas, la emisión termoiónica proporciona un contacto catódico eficiente y resulta en una sección catódica pequeña. En el análisis anterior, tanto la transición de emisión SCL a RD como la propia ley de emisión SCL consiste en un modelo muy simplificado. Por ello, a continuación se ha estudiado con detalle la solución de vaina estacionaria de una sonda con emisión termoiónica polarizada negativamente respecto a un plasma isotrópico, no colisional y sin campo magnético. La existencia de posibles partículas atrapadas ha sido ignorada y el estudio incluye tanto un estudio semi-analítico mediante técnica asintóticas como soluciones numéricas completas del problema. Bajo las tres condiciones (i) alto potencial, (ii) R = Rmax para la validez de la captura iónica OML, y (iii) potencial monotónico, se desarrolla un análisis asintótico auto-consistente para la estructura de plasma compleja que contiene las tres especies de cargas (electrones e iones del plasma, electrones emitidos), y cuatro regiones espaciales distintas, utilizando teorías de movimiento orbital y modelos cinéticos de las especies. Aunque los electrones emitidos presentan carga espacial despreciable muy lejos de la sonda, su efecto no se puede despreciar en el análisis global de la estructura de la vaina y de dos capas finas entre la vaina y la región cuasi-neutra. El análisis proporciona las condiciones paramétricas para que la corriente sea SCL. También muestra que la emisión termoiónica aumenta el radio máximo de la sonda para operar dentro del régimen OML y que la emisión de electrones es mucho más eficiente que la captura iónica para el segmento catódico de la amarra. En el código numérico, los movimientos orbitales de las tres especies son modelados para potenciales tanto monotónico como no-monotónico, y sonda de radio R arbitrario (dentro o más allá del régimen de OML para la captura iónica). Aprovechando la existencia de dos invariante, el sistema de ecuaciones Poisson-Vlasov se escribe como una ecuación integro-diferencial, la cual se discretiza mediante un método de diferencias finitas. El sistema de ecuaciones algebraicas no lineal resultante se ha resuelto de con un método Newton-Raphson paralelizado. Los resultados, comparados satisfactoriamente con el análisis analítico, proporcionan la emisión de corriente y la estructura del plasma y del potencial electrostático. ABSTRACT An electrodynamic tether operates on electromagnetic principles and exchanges momentum through the planetary magnetosphere, by continuously interacting with the ionosphere. It is a reliable passive subsystem to deorbit spent rocket stages and satellites at its end of mission, mitigating the growth of orbital debris. A tether left bare of insulation collects electrons by its own uninsulated and positively biased segment with kilometer range, while electrons are emitted by a low-impedance active device at the cathodic end, such as a hollow cathode, to emit the full electron current. In the absence of an active cathodic device, the current flowing along an orbiting bare tether vanishes at both ends and the tether is said to be electrically floating. For negligible thermionic emission and orbital-motion-limited (OML) collection throughout the entire tether (electron/ion collection at anodic/cathodic segment, respectively), the anodic-to-cathodic length ratio is very small due to ions being much heavier, which results in low average current and Lorentz drag. The electride C12A7 : e−, which might present a possible work function as low as W = 0.6 eV and moderately high temperature stability, has been proposed as coating for floating bare tethers. Thermionic emission along a thus coated cathodic segment, under heating in space operation, can be more efficient than ion collection and, in the simplest drag mode, may eliminate the need for an active cathodic device and its corresponding gas-feed requirements and power subsystem, which would result in a truly “propellant-less” tether system. With this low-W coating, each elemental segment on the cathodic segment of a kilometers-long floating bare-tether would emit current as if it were part of a hot cylindrical probe uniformly polarized at the local tether bias, under 2D probe conditions that are also applied to the anodic-segment analysis. In the presence of emission, emitted electrons result in negative space charge, which decreases the electric field that accelerates them outwards, or even reverses it, decelerating electrons near the emitting probe. A double sheath would be established with electrons being emitted from the probe and ions coming from the ambient plasma. The thermionic current density, varying along the cathodic segment, might follow two distinct laws under different con ditions: i) space-charge-limited (SCL) emission or ii) full Richardson-Dushman (RDS) emission. A preliminary study on the SCL current in front of an emissive probe is presented using the orbital-motion-limited (OML) ion-collection sheath and Langmuir’s SCL electron current between cylindrical electrodes. A detailed calculation of current and bias profiles along the entire tether length is carried out with ohmic effects considered and the transition from SCL to full RDS emission is included. Analysis shows that in the simplest drag mode, under typical orbital and tether conditions, thermionic emission provides efficient cathodic contact and leads to a short cathodic section. In the previous analysis, both the transition between SCL and RDS emission and the current law for SCL condition have used a very simple model. To continue, considering an isotropic, unmagnetized, colissionless plasma and a stationary sheath, the probe-plasma contact is studied in detail for a negatively biased probe with thermionic emission. The possible trapped particles are ignored and this study includes both semianalytical solutions using asymptotic analysis and complete numerical solutions. Under conditions of i) high bias, ii) R = Rmax for ion OML collection validity, and iii) monotonic potential, a self-consistent asymptotic analysis is carried out for the complex plasma structure involving all three charge species (plasma electrons and ions, and emitted electrons) and four distinct spatial regions using orbital motion theories and kinetic modeling of the species. Although emitted electrons present negligible space charge far away from the probe, their effect cannot be neglected in the global analysis for the sheath structure and two thin layers in between the sheath and the quasineutral region. The parametric conditions for the current to be space-chargelimited are obtained. It is found that thermionic emission increases the range of probe radius for OML validity and is greatly more effective than ion collection for cathodic contact of tethers. In the numerical code, the orbital motions of all three species are modeled for both monotonic and non-monotonic potential, and for any probe radius R (within or beyond OML regime for ion collection). Taking advantage of two constants of motion (energy and angular momentum), the Poisson-Vlasov equation is described by an integro differential equation, which is discretized using finite difference method. The non-linear algebraic equations are solved using a parallel implementation of the Newton-Raphson method. The results, which show good agreement with the analytical results, provide the results for thermionic current, the sheath structure, and the electrostatic potential.

Forced Response of Mistuned Bladed Disks: Quantitative Validation of the Asymptotic Description

The effect of small mistuning in the forced response of a bladed disk is analyzed using a recently introduced methodology: the asymptotic mistuning model. The asymptotic mistuning model is an extremely reduced, simplified model that is derived directly from the full formulation of the mistuned bladed disk using a consistent perturbative procedure based on the relative smallness of the mistuning distortion. A detailed description of the derivation of the asymptotic mistuning model for a realistic bladed disk configuration is presented. The asymptotic mistuning model results for several different mistuning patterns and forcing conditions are compared with those from a high-resolution finite element model. The asymptotic mistuning model produces quantitatively accurate results, and, probably more relevant, it gives precise information about the factors (tuned modes and components of the mistuning pattern) that actually play a role in the vibrational forced response of mistuned bladed disks.

Intramolecular vibrational dephasing obeys a power law at intermediate times

Experimental intramolecular vibrational dephasing transients for several large organic molecules are reanalyzed. Fits to the experimental data, as well as full numerical quantum calculations with a factorized potential surface for all active degrees of freedom of fluorene indicate that power law decays, not exponentials, occur at intermediate times. The results support a proposal that power law decays describe vibrational dephasing dynamics in large molecules at intermediate times because of the local nature of energy flow.

Small viscosity asymptotics for the inertial range of local structure and for the wall region of wall-bounded turbulent shear flow.

The small viscosity asymptotics of the inertial range of local structure and of the wall region in wallbounded turbulent shear flow are compared. The comparison leads to a sharpening of the dichotomy between Reynolds number dependent scaling (power-type) laws and the universal Reynolds number independent logarithmic law in wall turbulence. It further leads to a quantitative prediction of an essential difference between them, which is confirmed by the results of a recent experimental investigation. These results lend support to recent work on the zero viscosity limit of the inertial range in turbulence.

Under the veneer of decentralisation. Ukraine's modernisation efforts stall due to lack of local government reform. OSW Commentary No. 102, 2013-02-12

President Viktor Yanukovych and his Party of Regions have been repeating the pledge to decentralise power in Ukraine and to give local government a greater decision-making role ever since the party appeared on the Ukrainian political scene. The implementation of this reform is crucial both for the economic recovery of Ukraine’s regions and the overall modernisation efforts of the Ukrainian state. At present relations between central government and the regions are regulated by Soviet-era legislation that fails to address the modern-day challenges facing Ukraine. The political elite in the country, including the opposition, appear to have reached consensus on the importance of the decentralisation reform. The first attempts to implement changes in this area were made in the late 1990s, followed by a comprehensive reform programme developed between 2007 and 2009 by Yulia Tymoshenko’s government. In 2012, the Constitutional Assembly under the President of Ukraine appointed a team of experts who drafted a document detailing the reform of local government and the territorial organisation of power1. The document envisages the implementation of what effectively are two major reforms: (1) an administrative-territorial reform, which would help consolidate the fragmented administrative structure, creating larger and more economically self-sufficient administrative units, and (2) local government reform, focusing on creating clearly defined powers for local authorities with a view to securing government funding for specific tasks delegated from central government. Nonetheless, despite these measures, and in spite of the rhetoric coming from President Yanukovych and other members of the Party of Regions, it seems unlikely that the reform will be implemented in the foreseeable future. A series of concrete political decisions taken by the president over the past three years indicate that Yanukovych has not abandoned his plan to build a highly centralised political system. This in turn limits the capacity to govern of local authorities and further restricts the sources of funding for Ukraine’s regions. This apparent resistance to change stems from the fact that by implementing the proposed reforms, the president and his political allies would be forced to relinquish much of their control over the political processes taking place in the country and would have to free up the distribution of budgetary resources between Kyiv and the regions. The implementation of the reform within the specified timeframe (i.e. by 2015) is also unlikely due to the upcoming presidential election and the deteriorating economic situation in Ukraine. Without a comprehensive reform of local government, however, Ukraine will be unable to undertake effective modernisation measures, which are key for the socio-economic development of the country’s regions.

The Party of Regions monopolises power in Ukraine. OSW Commentary No. 40, 2010-09-29

Since the Party of Regions took power in Ukraine, the process of strengthening the executive branch of government at the expense of the others, together with the instrumental use of the law, has been progressing steadily. By seeking to restrict criticism of the government, the ruling party is aiming at marginalisation of opposition groups and establishing informal control over the main media (largely by exerting pressure on their owners). The role of the Security Service of Ukraine (SBU) is growing, as it is used increasingly frequently to put pressure on Western-oriented NGOs. The government’s control over the judiciary is expanding. These trends had existed before the Party of Regions’ ascension to power, but they were much weaker, as the previous governments did not enjoy such a strong position or the ability to achieve their ends so efficiently. The Party of Regions is planning to take another step towards total power during the local elections scheduled for October 2010. The party is determined to establish control over the local self-governments; to this end, it has amended the legislation in a way which now undermines local civil initiatives. These changes not only illustrate the interests and political standpoint of the ruling elite; they also result from systemic reasons, and these are deeply rooted in the Soviet past. The present Ukrainian state has evolved through the evolutionary transformation of the Ukrainian Soviet Socialist Republic. As a result, the main features of the previous system have been sustained, including the weakness of the representative bodies and the instrumental use of the law. Twenty years into its independent development, Ukraine has developed a merely formal democracy, which is distant from EU standards.

The town officer's guide, containing a compilation of the general laws of Massachusetts, relating to the whole power and duty of towns, districts, and parishes, with their several officers; with a digest of the decisions in the Supreme Judicial Court of Massachusetts, relating to the several subjects.

Mode of access: Internet.

New electric power technologies

"OTA-E-246"--P. [4] of cover

Testing Independence in High Dimensions & Identifiability of Graphical Models

Thesis (Ph.D.)--University of Washington, 2016-06

Integration of autonomic and local mechanisms in regulating cardiovascular responses to heating and cooling in a reptile (Crocodylus porosus)

Reptiles change heart rate and blood flow patterns in response to heating and cooling, thereby decreasing the behavioural cost of thermoregulation. We tested the hypothesis that locally produced vasoactive substances, nitric oxide and prostaglandins, mediate the cardiovascular response of reptiles to heat. Heart rate and blood pressure were measured in eight crocodiles (Crocodylus porosus) during heating and cooling and while sequentially inhibiting nitric-oxide synthase and cyclooxygenase enzymes. Heart rate and blood pressure were significantly higher during heating than during cooling in all treatments. Power spectral density of heart rate and blood pressure increased significantly during heating and cooling compared to the preceding period of thermal equilibrium. Spectral density of heart rate in the high frequency band (0.19-0.70 Hz) was significantly greater during cooling in the saline treatment compared to when nitric-oxide synthase and cyclooxygenase enzymes were inhibited. Cross spectral analysis showed that changes in blood pressure preceded heart rate changes at low frequencies (

The patrol officers and Tom Kabu: power and prestige in the Purari Delta

In 1946, Tom Kabu returned to the Gulf of Papua determined to reinvent the communities of the Purari Delta. A man of quiet determination, in the first few years he and his followers resisted the assistance of the Australian Administration in Palma and New Guinea. Kabu's popularity in the villages of the Purari, coupled with his independent stance, caused resentment within the local expatriate community. The field staff working for the Department of District Services and Native Affairs especially felt threatened by Kabu's influence and sought to regain government control by opposing his ventures. Through the study of patrol reports written by these officers, this paper seeks to examine the reasons for this resentment and the methods employed by the officers to crush Kabu's company.

The missing ingredient:inter-municipal cooperation and central-local relations in the UK

The thrust of the argument presented in this chapter is that inter-municipal cooperation (IMC) in the United Kingdom reflects local government's constitutional position and its exposure to the exigencies of Westminster (elected central government) and Whitehall (centre of the professional civil service that services central government). For the most part councils are without general powers of competence and are restricted in what they can do by Parliament. This suggests that the capacity for locally driven IMC is restricted and operates principally within a framework constructed by central government's policy objectives and legislation and the political expediencies of the governing political party. In practice, however, recent examples of IMC demonstrate that the practices are more complex than this initial analysis suggests. Central government may exert top-down pressures and impose hierarchical directives, but there are important countervailing forces. Constitutional changes in Scotland and Wales have shifted the locus of central- local relations away from Westminster and Whitehall. In England, the seeding of English government regional offices in 1994 has evolved into an important structural arrangement that encourages councils to work together. Within the local government community there is now widespread acknowledgement that to achieve the ambitious targets set by central government, councils are, by necessity, bound to cooperate and work with other agencies. In recent years, the fragmentation of public service delivery has affected the scope of IMC. Elected local government in the UK is now only one piece of a complex jigsaw of agencies that provides services to the public; whether it is with non-elected bodies, such as health authorities, public protection authorities (police and fire), voluntary nonprofit organisations or for-profit bodies, councils are expected to cooperate widely with agencies in their localities. Indeed, for projects such as regeneration and community renewal, councils may act as the coordinating agency but the success of such projects is measured by collaboration and partnership working (Davies 2002). To place these developments in context, IMC is an example of how, in spite of the fragmentation of traditional forms of government, councils work with other public service agencies and other councils through the medium of interagency partnerships, collaboration between organisations and a mixed economy of service providers. Such an analysis suggests that, following changes to the system of local government, contemporary forms of IMC are less dependent on vertical arrangements (top-down direction from central government) as they are replaced by horizontal modes (expansion of networks and partnership arrangements). Evidence suggests, however that central government continues to steer local authorities through the agency of inspectorates and regulatory bodies, and through policy initiatives, such as local strategic partnerships and local area agreements (Kelly 2006), thus questioning whether, in the case of UK local government, the shift from hierarchy to network and market solutions is less differentiated and transformation less complete than some literature suggests. Vertical or horizontal pressures may promote IMC, yet similar drivers may deter collaboration between local authorities. An example of negative vertical pressure was central government's change of the systems of local taxation during the 1980s. The new taxation regime replaced a tax on property with a tax on individual residency. Although the community charge lasted only a few years, it was a highpoint of the then Conservative government policy that encouraged councils to compete with each other on the basis of the level of local taxation. In practice, however, the complexity of local government funding in the UK rendered worthless any meaningful ambition of councils competing with each other, especially as central government granting to local authorities is predicated (however imperfectly) on at least notional equalisation between those areas with lower tax yields and the more prosperous locations. Horizontal pressures comprise factors such as planning decisions. Over the last quarter century, councils have competed on the granting of permission to out-of-town retail and leisure complexes, now recognised as detrimental to neighbouring authorities because economic forces prevail and local, independent shops are unable to compete with multiple companies. These examples illustrate tensions at the core of the UK polity of whether IMC is feasible when competition between local authorities heightened by local differences reduces opportunities for collaboration. An alternative perspective on IMC is to explore whether specific purposes or functions promote or restrict it. Whether in the principle areas of local government responsibilities relating to social welfare, development and maintenance of the local infrastructure or environmental matters, there are examples of IMC. But opportunities have diminished considerably as councils lost responsibility for services provision as a result of privatisation and transfer of powers to new government agencies or to central government. Over the last twenty years councils have lost their role in the provision of further-or higher-education, public transport and water/sewage. Councils have commissioning power but only a limited presence in providing housing needs, social care and waste management. In other words, as a result of central government policy, there are, in practice, currently far fewer opportunities for councils to cooperate. Since 1997, the New Labour government has promoted IMC through vertical drivers and the development; the operation of these policy initiatives is discussed following the framework of the editors. Current examples of IMC are notable for being driven by higher tiers of government, working with subordinate authorities in principal-agent relations. Collaboration between local authorities and intra-interand cross-sectoral partnerships are initiated by central government. In other words, IMC is shaped by hierarchical drivers from higher levels of government but, in practice, is locally varied and determined less by formula than by necessity and function. © 2007 Springer.

Democratization of local government in Brazil : decentralisation and people's councils

This research studies two cases of implementation of alternative strategies for municipal government reform in Brazil, decentralisation and People's Councils. The aim is to answer the following general question: `Can decentralisation and People's Councils be a means for democratization of municipal government in Brazil?'. The hypothesis is that initiatives to reform Brazilian municipal governments face problems that are characteristic of the Brazilian political and administrative reality. These problems are considered obstacles for the development of those initiatives and accordingly, for democratization of municipal government in Brazil. After an introduction and outline in Chapter One, Chapter Two discusses four main theories concerning local government. Chapter Three discusses decentralisation and People's Councils are discussed in Chapter Four. Chapter Five presents a historical, political and economic overview of Brazil. Chapter Six deals with Brazilian Federalism and Municipal Government. The main aspects of the Municipal Government are presented as well as the development of municipal autonomy through the various Federal Constitutions and cases of People's Councils and decentralisation in municipalities in Brazil. Chapter Seven presents the political parties responsible for the initiatives, the PSDB (Brazilian Social Democratic Party) in the case of decentralisation, and the PT (Workers' Party) in the case of People's Councils. In Chapter Eight the research strategy and the data collection techniques are described. Chapters Nine and Ten present decentralisation implemented by the PSDB in Belo Horizonte, the Minas Gerais state capital and People's Councils introduced by the PT in the town of Ipatinga in the same state. Conclusions are presented in Chapter Eleven and include a comparison and discussion of the two cases. The thesis shows that these experiments with alternative strategies of local government face problems that are generally current in Brazilian political and administrative reality. Those problems are concerned with unwillingness to decentralise power, clientelism, low levels of participation of civil society and the `political' use of the structures implemented.

Understanding change in the public sector:a local authority case study

Increasingly managers in the public sector are being required to manage change, but many of the models of change which are available to them have been developed from private sector experience. There is a need to understand more about how the change process unfolds in the public sector. A case study of change in one local authority over the period 1974-87 is provided. The events surrounding housing decentralisation and the introduction of community development are considered in detail. To understand these events a twofold model of change is proposed: a short wave model which explains a change project or event; and a long wave model which considers how these projects or events might be linked together to provide a picture of an organisation over a longer period. The short wave model identifies multiple triggers of change and signals the importance of mediators in recognising these triggers. The extent to which new ideas are implemented and the pace of their adoption is influenced by the balance of power within the organisation and the political tactics which are used. Broad phases in the change process can be identified, but there is not a simple linear passage through these. The long wave model considers the way in which continuity and change feed off one another. It suggests that periods of relative stability may be interspersed with more radical transformations as the dominant paradigm guiding the organisation shifts. However, such paradigmatic shifts in local government may be less obvious than in the private sector due to the diverse nature of the former.