New modified electrochemical conductive paper support for BSA detection

Chemical sensors and biosensors are widely used to detect various kinds of protein target biomolecules. Molecularly Imprinted Polymers (MIPs) have raised great interest in this area, because these act as antibody-like recognition materials, with high affinity to the template molecule. Compared to natural antibodies, these are also of lower cost and higher stability. There are different types of supports used to carry MIP materials, mostly of these made of gold, favourably assembled on a Screen Printed Electrode (SPE) strategy. For this work a new kind of support for the sensing layer was developed: conductive paper. This support was made by modifying first cellulose paper with paraffin wax (to make it waterproof), and casting a carbon-ink on it afterwards, to turn it conductive. The SPAM approach previously reported in1 was employed herein to assemble to MIP sensing material on the conductive paper. The selected charged monomers were (vinylbenzyl) trimethlammonium chloride (positive charge) or vinylbenzoic acid (negative charge), used to generate binding positions with single-type charge (positive or negative). The non-specific binding area of the MIP layer was assembled by chronoamperometry-assisted polymerization (at 1 V, for 60, 120 or 180 seconds) of vinylbenzoate, cross-linked with ethylene glycol vinyl ether. The BSA biomolecules lying within the polymeric matrix were removed by Proteinase K action. All preparation stages of the MIP assembly were followed by FTIR, Raman spectroscopy and, electrochemical analysis. In general, the best results were obtained for longer polymerization times and positively charged binding sites (which was consistent with a negatively-charged protein under physiological pH, as BSA). Linear responses against BSA concentration ranged from 0.005 to 100 mg/mL, in PBS buffer standard solutions. The sensor was further calibrated in standard solutions that were prepared in synthetic or real urine, and the analytical response became more sensitive and stable. Compared to the literature, the detection capability of the developed device is better than most of the reported electrodes. Overall, the simplicity, low cost and good analytical performance of the BSA SPE device, prepared with positively charged binding positions, seems a suitable approach for practical application in clinical context. Further studies with real samples are required, as well as gathering with electronic-supporting devices to allow on-site readings.

Myoglobin-biomimetic electroactive materials made by surface molecular imprinting on silica beads and their use as ionophores in polymeric membranes for potentiometric transduction

Myoglobin (Mb) is among the cardiac biomarkers playing a major role in urgent diagnosis of cardiovascular diseases. Its monitoring in point-of-care is therefore fundamental. Pursuing this goal, a novel biomimetic ionophore for the potentiometric transduction of Mb is presented. It was synthesized by surface molecular imprinting (SMI) with the purpose of developing highly efficient sensor layers for near-stereochemical recognition of Mb. The template (Mb) was imprinted on a silane surface that was covalently attached to silica beads by means of self-assembled monolayers. First the silica was modified with an external layer of aldehyde groups. Then, Mb was attached by reaction with its amine groups (on the external surface) and subsequent formation of imine bonds. The vacant places surrounding Mb were filled by polymerization of the silane monomers 3-aminopropyltrimethoxysilane (APTMS) and propyltrimethoxysilane (PTMS). Finally, the template was removed by imine cleavage after treatment with oxalic acid. The results materials were finely dispersed in plasticized PVC selective membranes and used as ionophores in potentiometric transduction. The best analytical features were found in HEPES buffer of pH 4. Under this condition, the limits of detection were of 1.3 × 10−6 mol/L for a linear response after 8.0 × 10−7 mol/L with an anionic slope of −65.9 mV/decade. The imprinting effect was tested by preparing non-imprinted (NI) particles and employing these materials as ionophores. The resulting membranes showed no ability to detect Mb. Good selectivity was observed towards creatinine, sacarose, fructose, galactose, sodium glutamate, and alanine. The analytical application was conducted successfully and showed accurate and precise results.

RoutesMobilityModel: easy realistic mobility simulation using external information services

Workshop on ns-3 (WNS '15). 13, May, 2015. Castelldefels, Spain.

The potential of molecular imprinting as a biosensing devices for monitoring the CEA cancer biomarker

6th Graduate Student Symposium on Molecular Imprinting

SI SC MDAC switched current-capacitor multiplying digital-to-analog converter

Dissertação apresentada para a obtenção do grau de Mestre em Engenharia Electrotécnica e de Computadores

O reconhecimento de si no cyborg: Uma análise cinematográfica das implicações sociais do surgimento do pós-humano

Dissertação apresentada para cumprimento dos requisitos necessários à obtenção do grau de Mestre em Ciências da Comunicação

Cross-Layer Admission Control to Enhance the Support of Real-Time Applications in WSN

Real-time monitoring applications may be used in a wireless sensor network (WSN) and may generate packet flows with strict quality of service requirements in terms of delay, jitter, or packet loss. When strict delays are imposed from source to destination, the packets must be delivered at the destination within an end-to-end delay (EED) hard limit in order to be considered useful. Since the WSN nodes are scarce both in processing and energy resources, it is desirable that they only transport useful data, as this contributes to enhance the overall network performance and to improve energy efficiency. In this paper, we propose a novel cross-layer admission control (CLAC) mechanism to enhance the network performance and increase energy efficiency of a WSN, by avoiding the transmission of potentially useless packets. The CLAC mechanism uses an estimation technique to preview packets EED, and decides to forward a packet only if it is expected to meet the EED deadline defined by the application, dropping it otherwise. The results obtained show that CLAC enhances the network performance by increasing the useful packet delivery ratio in high network loads and improves the energy efficiency in every network load.

In vitro antimalarial activity and cytotoxicity of some selected cuban medicinal plants

Terrestrial plants have been demonstrated to be sources of antimalarial compounds. In Cuba, little is known about antimalarial potentials of plant species used as medicinals. For that reason, we evaluated the antimalarial activity of 14 plant species used in Cuba as antimalarial, antipyretic and/or antiparasitic. Hydroalcoholic extracts were prepared and tested in vitro for the antimalarial activity against Plasmodium falciparum Ghana strain and over human cell line MRC-5 to determine cytotoxicity. Parasite multiplication was determined microscopically by the direct count of Giemsa stained parasites. A colorimetric assay was used to quantify cytotoxicity. Nine extracts showed IC50 values lower than 100 µg/mL against P. falciparum, four extracts were classified as marginally active (SI < 4), one as partially active (Parthenium hysterophorus) exhibiting SI equal to 6.2 and two extracts as active (Bambusa vulgaris and Punica granatum), showing SI > 10. B. vulgaris showed the most potent and specific antiplasmodial action (IC50 = 4.7 µg/mL, SI = 28.9). Phytochemical characterization of active extracts confirmed the presence of triterpenoids in B. vulgaris and polar compounds with phenol free groups and fluorescent metabolites in both extracts as major phytocompounds, by thin layer chromatography. In conclusion, antimalarial use of B. vulgaris and P. hysterophorus was validated. B. vulgaris and P. granatum extracts were selected for follow-up because of their strong antimalarial activity.

Observation of 2p3d(¹P°)→1s3d(¹Dᵉ) Radiative Transition in He-like Si, S, and Cl Ions

APS, Journals Phys. Rev. Lett., Volume 111, Issue 24

A layer 2 multipath fabric using a centralized controller

Dissertação para obtenção do Grau de Mestre em Engenharia Electrotécnica e de Computadores

O SUJEITO DE SI NO DISCURSO MEDIEVAL - EM TORNO DO SOLILÓQUIO (DE SANTO AGOSTINHO AO ROMAN DE TRISTAN DE THOMAS D'ANGLETERRE)

Agostinho parece ter sido o primeiro a utilizar o termo solilóquio para designar uma forma específica do diálogo interior da alma que coloca como interlocutores o eu e si próprio. De certa forma, esta estrutura dialógica do solilóquio prolonga os diálogos socráticos, mas situando a interrogação do eu sobre si mesmo no interior do eu, ou seja, tornando-a um exercício preponderantemente mental ainda que passe pelo discurso verbal. O objectivo é fazer desenrolar um diálogo interior em que o indivíduo se vai dando conta progressivamente da ignorância em que está acerca de si mesmo. O Soliloquium1 , atribuído a Agostinho, aprofunda e insiste nesta vertente do discurso interior que constituía já o modo discursivo nas Confissões. Com a utilização desta técnica cria-se um novo procedimento ético segundo o qual a literatura é posta ao serviço da filosofia.

A Consciência de Si e o Desespero Inconsciente, segundo Kierkegaard

A tradição cartesiana identificou um conjunto de condições para que se possa dizer que um sujeito está consciente de si. Simultaneamente, procurou a consciência de si num acompanhamento de si ao modo do pensamento. Ora, do ponto de vista de Kierkegaard, os requisitos cartesianos da consciência de si não são cumpridos na concepção de consciência da própria tradição cartesiana. É precisamente isso que se evidencia com a noção de desespero inconsciente. Neste estudo, procura-se determinar em que condições é possível falar de estar consciente de si, segundo Kierkegaard, o que conduzirá a uma multiplicidade paradoxal. Para se compreender o que está em causa estudar-se-á a estrutura sintética e heterogénea do humano. Em última análise, os requisitos da constituição da consciência de si, porque o são do si, só se cumprem numa certa forma de desconhecimento de si que corresponde a uma forma de consciência de si em que nunca se está certo e seguro de si, mas que passa pela decisão na interioridade.

Digital microfluidic devices: the role of the dielectric layer

Digital microfluidics (DMF) is a field which has emerged in the last decade as a re-liable and versatile tool for sensing applications based on liquid reactions. DMF allows the discrete displacement of droplets, over an array of electrodes, by the application of voltage, and also the dispensing from a reservoir, mixing, merging and splitting fluidic operations. The main drawback of these devices is due to the need of high driving volt-ages for droplet operations. In this work, alternative dielectric layers combinations were studied aiming the reduction of these driving voltages. DMF chips were designed, pro-duced and optimized according to the theory of electrowetting-on-dielectric, adopting different combinations of parylene-C and tantalum pentoxide (Ta2O5) as dielectric ma-terials, and Teflon as hydrophobic layer. With both devices’ configurations, i.e., Parylene as single dielectric, and multilayer chips combining Parylene and Ta2O5, it was possible to perform all the fluidic opera-tions in the microliter down to hundreds of nanoliters range. Multilayer chips presented significant reduction on driving voltages for droplet op-erations in silicone oil filler medium: from 70 V (parylene only) down to 30 V (parylene/Ta2O5) for dispensing; and from 50 V (parylene only) down to 15 V (parylene/Ta2O5) for movement. Peroxidase colorimetric reactions were successfully performed as proof-of-concept, using multilayer configuration devices.

Cuidado de si e metanoia em Michel Foucault

Na perspetiva genealógica e hermenêutica de Michel Foucault aplicada à Antiguidade, a nossa tese relaciona cuidado de si e metanoia, discutindo o contraste entre o modelo helenístico-romano do cuidado como conversão a si e o modelo cristão da conversão através da renúncia a si. Com o olhar fixo neste horizonte temático pretendemos construir um percurso alinhado com o pensamento de Foucault, começando por sinalizar alguns dos seus textos mais importantes e delinear os traços mais marcantes do seu pensamento histórico-filosófico, mormente as suas investigações, não já sobre as tecnologias do poder e as tecnologias do saber, mas sobre as tecnologias do si na Antiguidade – técnicas culturais que deram origem à hermenêutica do sujeito, práticas complexas de subjetivação e objetivação dos sujeitos, cujas raízes remontam à cultura grega do séc. V a.C., mas que se consolidou apenas com os movimentos ascético-monásticos cristãos dos séculos IV e V. Excluída necessariamente a pretensão de redesenhar criticamente todo este longo desenvolvimento, propomos assinalar alguns dos mais importantes processos da cultura do cuidado de si na Antiguidade: - a análise filosófica do cuidado de si a partir do preceito délfico “Conhece-te a ti mesmo!”; - a cultura do si helenístico-romana; - as técnicas ou práticas do cuidado de si, em especial quatro: parrēsía, áskēsis, exomológēsis e exagóreusis. Neste contexto, afigura-se relevante que as duas primeiras sejam comuns à filosofia e ao cristianismo, mas com caraterísticas diferentes, sendo as duas últimas exclusivas desta religião, nas quais Foucault reconhece um impulso decisivo para a constituição da hermenêutica do sujeito – a prática sistemática da desvelação do si, algo que gregos e romanos não alcançaram, porque ainda não se tinha constituído culturalmente a noção de sujeito. Para esclarecermos este duplo movimento de conhecimento e modificação do si, procuramos mostrar o contraste cultural na Antiguidade entre dois modelos de subjetivação e de objetivação dos indivíduos, a ética como prática refletida da liberdade e a moral cristã da obediência. O primeiro modelo orbitou em torno do princípio geral do cuidado de si, assimilado pela cultura grega e repercutido na filosofia, o segundo foi marcado pela nova forma de domínio e submissão – o poder pastoral – justificado pela obediência e pela renúncia a si, que transformaram o cristianismo numa religião confessional. Para confirmarmos esta interpretação, convocamos à reflexão a noção de conversão. Começamos por valorizar o contributo dos termos gregos epistrophē e metanoia. De seguida, justificamos a relevância da conversão para a Cultura Ocidental. Concluímos com a análise de três modelos históricos: platónico, helenístico-romano e cristão. O arco temático termina com a análise do valor paradoxal da renúncia a si em Paulo de Tarso, cujos textos Foucault não analisou no âmbito da cultura do si, mas que nós valorizamos e nos levam a divergir deste filósofo, para quem a renúncia a si anula a eficácia do cuidado de si, propondo em alternativa a tese de que as várias formas de renúncia, mesmo enunciadas numa perspetiva escatológica, não só integraram como intensificaram essa cultura do cuidado.

Control of a white organic light emitting diode’s emission parameters using a single doped RGB active layer

White Color tuning is an attractive feature that Organic Light Emitting Diodes (OLEDs) offer. Up until now, there hasn’t been any report that mix both color tuning abilities with device stability. In this work, White OLEDs (W-OLEDs) based on a single RGB blend composed of a blue emitting N,N′-Di(1-naphthyl)-N,N′-diphenyl-(1,1′-biphenyl)-4,4′-diamine (NPB) doped with a green emitting Coumarin-153 and a red emitting 4-(Dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM1) dyes were produced. The final device structure was ITO/Blend/Bathocuproine (BCP)/ Tris(8-hydroxyquinolinato)aluminium (Alq3)/Al with an emission area of 0.25 cm2. The effects of the changing in DCM1’s concentration (from 0.5% to 1% wt.) allowed a tuning in the final white color resulting in devices capable of emitting a wide range of tunes – from cool to warm – while also keeping a low device complexity and a high stabilitty. Moreover, an explanation on the optoelectrical behavior of the device is presented. The best electroluminescense (EL) points toward 160 cd/m2 of brightness and 1.1 cd/A of efficiency, both prompted to being enhanced. An Impedance Spectroscopy (IS) analysis allowed to study both the effects of BCP as a Hole Blocking Layer and as an aging probe of the device. Finally, as a proof of concept, the emission was increased 9 and 64 times proving this structure can be effectively applied for general lighting.