Energy Aware Cluster-based Multihop Routing Protocol for Sensor Networks

Clustering combined with multihop communication is a promising solution to cope with the energy requirements of large scale Wireless Sensor Networks. In this work, a new cluster based routing protocol referred to as Energy Aware Cluster-based Multihop (EACM) Routing Protocol is introduced, with multihop communication between cluster heads for transmitting messages to the base station and direct communication within clusters. We propose EACM with both static and dynamic clustering. The network is partitioned into near optimal load balanced clusters by using a voting technique, which ensures that the suitability of a node to become a cluster head is determined by all its neighbors. Results show that the new protocol performs better than LEACH on network lifetime and energy dissipation

Impact of Node Mobility on Routing Protocols for Wireless Sensor Networks

Wireless sensor networks monitor their surrounding environment for the occurrence of some anticipated phenomenon. Most of the research related to sensor networks considers the static deployment of sensor nodes. Mobility of sensor node can be considered as an extra dimension of complexity, which poses interesting and challenging problems. Node mobility is a very important aspect in the design of effective routing algorithm for mobile wireless networks. In this work we intent to present the impact of different mobility models on the performance of the wireless sensor networks. Routing characteristics of various routing protocols for ad-hoc network were studied considering different mobility models. Performance metrics such as end-to-end delay, throughput and routing load were considered and their variations in the case of mobility models like Freeway, RPGM were studied. This work will be useful to figure out the characteristics of routing protocols depending on the mobility patterns of sensors

Global Optimization Algorithms and their Application to Distributed Systems

In this report, we discuss the application of global optimization and Evolutionary Computation to distributed systems. We therefore selected and classified many publications, giving an insight into the wide variety of optimization problems which arise in distributed systems. Some interesting approaches from different areas will be discussed in greater detail with the use of illustrative examples.

Investigation of Multiphase Power Converter using Integrated Coupled Inductor Regarding Electric Vehicle Application

The challenge of reducing carbon emission and achieving emission target until 2050, has become a key development strategy of energy distribution for each country. The automotive industries, as the important portion of implementing energy requirements, are making some related researches to meet energy requirements and customer requirements. For modern energy requirements, it should be clean, green and renewable. For customer requirements, it should be economic, reliable and long life time. Regarding increasing requirements on the market and enlarged customer quantity, EVs and PHEV are more and more important for automotive manufactures. Normally for EVs and PHEV there are two important key parts, which are battery package and power electronics composing of critical components. A rechargeable battery is a quite important element for achieving cost competitiveness, which is mainly used to story energy and provide continue energy to drive an electric motor. In order to recharge battery and drive the electric motor, power electronics group is an essential bridge to convert different energy types for both of them. In modern power electronics there are many different topologies such as non-isolated and isolated power converters which can be used to implement for charging battery. One of most used converter topology is multiphase interleaved power converter, pri- marily due to its prominent advantages, which is frequently employed to obtain optimal dynamic response, high effciency and compact converter size. Concerning its usage, many detailed investigations regarding topology, control strategy and devices have been done. In this thesis, the core research is to investigate some branched contents in term of issues analysis and optimization approaches of building magnetic component. This work starts with an introduction of reasons of developing EVs and PEHV and an overview of different possible topologies regarding specific application requirements. Because of less components, high reliability, high effciency and also no special safety requirement, non-isolated multiphase interleaved converter is selected as the basic research topology of founded W-charge project for investigating its advantages and potential branches on using optimized magnetic components. Following, all those proposed aspects and approaches are investigated and analyzed in details in order to verify constrains and advantages through using integrated coupled inductors. Furthermore, digital controller concept and a novel tapped-inductor topology is proposed for multiphase power converter and electric vehicle application.

A Hierarchical Cache Coherent Protocol

As the number of processors in distributed-memory multiprocessors grows, efficiently supporting a shared-memory programming model becomes difficult. We have designed the Protocol for Hierarchical Directories (PHD) to allow shared-memory support for systems containing massive numbers of processors. PHD eliminates bandwidth problems by using a scalable network, decreases hot-spots by not relying on a single point to distribute blocks, and uses a scalable amount of space for its directories. PHD provides a shared-memory model by synthesizing a global shared memory from the local memories of processors. PHD supports sequentially consistent read, write, and test- and-set operations. This thesis also introduces a method of describing locality for hierarchical protocols and employs this method in the derivation of an abstract model of the protocol behavior. An embedded model, based on the work of Johnson[ISCA19], describes the protocol behavior when mapped to a k-ary n-cube. The thesis uses these two models to study the average height in the hierarchy that operations reach, the longest path messages travel, the number of messages that operations generate, the inter-transaction issue time, and the protocol overhead for different locality parameters, degrees of multithreading, and machine sizes. We determine that multithreading is only useful for approximately two to four threads; any additional interleaving does not decrease the overall latency. For small machines and high locality applications, this limitation is due mainly to the length of the running threads. For large machines with medium to low locality, this limitation is due mainly to the protocol overhead being too large. Our study using the embedded model shows that in situations where the run length between references to shared memory is at least an order of magnitude longer than the time to process a single state transition in the protocol, applications exhibit good performance. If separate controllers for processing protocol requests are included, the protocol scales to 32k processor machines as long as the application exhibits hierarchical locality: at least 22% of the global references must be able to be satisfied locally; at most 35% of the global references are allowed to reach the top level of the hierarchy.

Disseny de les pautes per la redacció del protocol de gestió per les aus del PNAE

Aquest projecte té com a objectius: determinar les Directrius a seguir per la futura redacció d’un protocol de gestió de les zones inundables del PNAE, amb la finalitat de potenciar la presència d’aus; determinar les millors condicions d’hàbitat per les poblacions d’aus del PNAE i redactar unes línies de seguiment que permetin d'una banda avaluar si les pautes proposades tindran l’efecte desitjat i d'altra banda que permetin la redacció del protocol de gestió

Pla d’actuació contra l’absentisme escolar a Palafrugell: Diagnosi de la realitat socioeducativa i protocol d’actuació contra l’absentisme escolar i la desescolarització

El treball té l’objectiu de dissenyar un protocol d’actuació que contempli aspectes sobre prevenció, detecció i intervenció contra l’absentisme escolar i la desescolarització al municipi. Per a això s’ha desenvolupat una diagnosi municipal d’anàlisi de la realitat sobre el tema, fent èmfasi en la intervenció socioeducativa que s’ha de realitzar per a tractar el fenomen des d’una perspectiva holística i global

Estudi del protocol de mostreig i de l’afectació de la pressió humana en 4 microconques del riu Estelí (Nicaragua)

Objectius generals: Diagnosi de l’estat actual del riu Esteli. Avaluar la metodologia i proposar en el protocol del monitoreig.Estudiar si les comunitats de macroinvertebrats aquatics es veu afectades pel grau de pressió humana.Objectius específics: Comparar les mostres preses en dos mesos consecutius, per conèixer si les comunitats varien prou com per, agafar mostres cada mes en comptes de cada dos mesos. Determinar la qualitat de l’estació en diversos punts del riu Esteli considerant tant els resultats obtinguts a partir de les variables físicoquimiques de l’aigua, com les variables biològiques. Avaluar si la pressió humana afecta de manera diferent els diversos grups taxonòmics de macroinvertebrats de l’aigua. Avaluar amb quin índex biòtic es posa mes de manifest la pressió antròpica. Estudiar quines son les relacions de les diverses famílies de macroinvertebrats amb els paràmetres físicoquimics de l’aigua, i determinar si aquestes relacions varien en funcio del mes de mostreig o de l’ús del sòl.

Sistema de reserves hoteleres on-line, basat en el protocol de comunicació OTA

L’origen d’aquest projecte neix en la necessitat de crear un sistema de reserves hoteleres on-line integral i amb connectivitat amb altres sistemes de reserves. S'ha optat pel protocol de comunicació OTA(Open Travel Alliance), es tracta d'un protocol de comunicació XML ideat per empreses del sector turístic dels Estats Units per la necessitat comuna d’unes especificacions tècniques que permetessin la comunicació electrònica de la informació

Clinic protocol for diagnostic evaluation

This paper reviews clinic diagnostic hearing evaluations.

A hearing screening protocol in a pediatric practice based on otoacoustic emissions

This paper evaluates the routine of one pediatrics facility interested in incorporating a hearing screening protocol into their practice and suggests such a protocol using distortion product otoacoustic emission tests (DPOAE).