Telhado de Vidro: uma reflexão sobre os processos de inventário de patrimônio imaterial do IPHAN-RJ a partir do caso do inventário da Festa de Nossa Senhora da Conceição-RJ

Esta pesquisa tem como objeto a análise do inventário da festa de Nossa Senhora da Conceição, do Morro da Conceição, Rio de Janeiro, realizado por mim para a Superintendência do Instituto do Patrimônio Histórico e Artístico Nacional no Rio de Janeiro (IPHAN-RJ) entre julho de 2009 e março de 2010. Através de uma metodologia que envolve pesquisa documental e etnografia, estabeleço uma comparação entre o que é determinado oficialmente para a realização de um inventário de referências culturais e o que, na prática, é feito pelos técnicos e pesquisadores em relação à pesquisa e às demandas das comunidades. O trabalho engloba não apenas a investigação do processo de pesquisa do inventário, mas também os objetivos do referido instituto e as contrapartidas para a comunidade envolvida. Ainda, permite compreender as táticas utilizadas pela comunidade para alcançar seus objetivos frente ao IPHAN-RJ e aos pesquisadores e, em contrapartida, as estratégias desenvolvidas pela instituição e seus representantes para que seus intuitos políticos fossem alcançados.

Armazenamento e recuperação da informação

O item não apresenta o texto completo, pois está passando por revisão editorial

Vidro de relógio

Este modelo é parte de um conjunto de modelos 3D produzidos pela equipe de audiovisual da SEaD/UFSCar para o jogo de realidade virtual “O Laboratório de Química”.

Utilização de resíduo lignocelulósico na obtenção de chapa de madeira aglomerada homogênea e compósito reforçado com fibra de vidro-E

This research is about the use of the coconut´s endocarp (nucifera linn) and the waste of derivatives of wood and furniture as raw material to technological use. In that sense, the lignocellulosic waste is used for manufacture of homogeneous wood sheet agglomerate (LHWS) and lignocellulosic load which take part of a polymeric composite with fiber glass E (GFRP-WC). In the manufacturing of the homogeneous wood sheet agglomerate (LHWS), it was used mamona´s resin as waste s agglutinating element. The plates were taken up in a hydraulic press engine, heated, with temperature control, where they were manufactured for different percentage of waste wood and coconuts nucífera linn. Physical tests were conducted to determine the absorption of water, density, damp grade (in two hours and twenty-four hours), swelling thickness (in two hours and twenty-four hours), and mechanical tests to evaluate the parallel tensile strength (internal stick) and bending and the static (steady) flexural. The physical test´s results indicate that the LHWS can be classified as bonded wood plate of high-density and with highly water resistant. In the mechanical tests it was possible to establish that LHWS presents different characteristics when submitted to uniaxial tensile and to the static (steady) flexural, since brittle and elasticity module had a variation according to the amount of dry endocarp used to manufacture each trace of LHWS. The GFRP-WC was industrially manufactured by a hand-lay-up process where the fiber glass E was used as reinforcement the lignocellulósic´s waste as load. The matrix was made with ortofitalic unsaturated polyester resin. Physical and mechanical tests were performed in presence of saturated humidity and dry. The results indicated good performance of the GFRP-WC, as traction as in flexion in three points. The presence of water influenced the modules obtained in the flexural and tensile but there were no significant alteration in the properties analyzed. As for the fracture, the analysis showed that the effects are more harmful in the presence of damp, under the action of loading tested, but despite this, the fracture was well defined starting in the external parts and spreading to the internal regions when one when it reaches the hybrid load

Avaliação de concretos reforçados por confinamento com manta de fibra de vidro estrutural e pré-impreganada

Due to the occurrence of diseases in the use of structural reinforcements in composites, with presentation of concrete blanket detachment, has been identified the need to evaluate the performance of concrete reinforced with glass fiber. This study aims to evaluate these concretes by means of testing methodologies, using concrete with low resistance with structural reinforcement for confinement by preimpregnated glass fiber and traditional fiberglass blanket. The first stage of work was the development of methodologies for analysis, opting for four types, such as the acoustic survey, strength to compressive, the pull-off and ultrasound. Next, tests were carried out using the four selected methodologies in 30 of proof-of-specimens by 5x10 cm, 15 were reinforced with the traditional fiberglass blanket with 5specimens exposed to test a marine environment of marine coastline of Natal-RN and 15 were reinforced with a pre-impregnated glass fiber blanket, as well as 5specimens exposed to a test environment of the marine coastline of Natal-RN. After conducting the acoustic survey, it has been verified a lack of delaminating and air bubbles in the samples, confirming the absence of gross shortcomings in the implementation of the ribs both the traditional fiberglass blanket and in the preimpregnated fiber glass blanket. After carrying out methods of pull-off and compressive strengthening test it was observed that the reinforced proof-bodies with pre-impregnated glass blanket showed maximum stresses higher than the traditional fiberglass blanket; consequently a greater grip with the formation of a smaller area of . fracture, unlike traditional glass mat, which showed lower maximum stresses, with a greater area of fracture. It was also found that the traditional fiberglass blanket presented detachment of blanket-concrete interface, unlike the pre-impregnated fiberglass blanket, which showed a better grip on the blanket-concrete interface. In the trial of ultrasound there was no presence of cracks in the blanket-concrete interface, yielding to both blankets good compactness of the concrete. At the end of this work, they were developed and proposed two methods of testing for evaluation of reinforced concrete structures with composites, for standardization, the acoustic survey and pull-off

Desenvolvimento e caracterização de compósitos poli(tereftalato de etileno) reciclado (PET reciclado) com flocos de vidro.

The growing concern with the solid residues management, observed in the last decade, due to its huge amount and impact, has motivated the search for recycling processes, where these residues can be reprocessed to generate new products, enlarging the cycle of materials and energy which are present. Among the polymeric residues, there is poly (ethylene terephthalate) (PET). PET is used in food packaging, preferably in the bottling of carbonated beverages. The reintegration of post-consumer PET in half can be considered a productive action mitigation of environmental impacts caused by these wastes and it is done through the preparation of several different products at the origin, i.e. food packaging, with recycling rates increasing to each year. This work focused on the development and characterization mechanical, thermal, thermo-mechanical, dynamic mechanical thermal and morphology of the pure recycled PET and recycled PET composites with glass flakes in the weight fraction of 5%, 10% and 20% processed in a single screw extruder, using the following analytical techniques: thermogravimetry (TG), differential scanning calorimetry (DSC), tensile, Izod impact, Rockwell hardness, Vicat softening temperature, melt flow rate, burn rate, dynamic mechanical thermal analysis (DMTA) and scanning electron microscopy (SEM). The results of thermal analysis and mechanical properties leading to a positive evaluation, because in the thermograms the addition of glass flakes showed increasing behavior in the initial temperatures of thermal decomposition and melting crystalline, Furthermore was observed growing behavior in the mechanical performance of polymer composites, whose morphological structure was observed by SEM, verifying a good distribution of glass flakes, showing difference orientation in the center and in the surface layer of test body of composites with 10 and 20% of glass flakes. The results of DMTA Tg values of the composites obtained from the peak of tan ä showed little reductions due to poor interfacial adhesion between PET and recycled glass flakes.

Estudo comparativo de pás para aerogeradores de grande porte fabricadas em materiais compósitos reforçadas com fibra de carbono ou fibra de vidro

The research and development of wind turbine blades are essential to keep pace with worldwide growth in the renewable energy sector. Although currently blades are typically produced using glass fiber reinforced composite materials, the tendency for larger size blades, particularly for offshore applications, has increased the interest on carbon fiber reinforced composites because of the potential for increased stiffness and weight reduction. In this study a model of blade designed for large generators (5 MW) was studied on a small scale. A numerical simulation was performed to determine the aerodynamic loading using a Computational Fluid Dynamics (CFD) software. Two blades were then designed and manufactured using epoxy matrix composites: one reinforced with glass fibers and the other with carbon fibers. For the structural calculations, maximum stress failure criterion was adopted. The blades were manufactured by Vacuum Assisted Resin Transfer Molding (VARTM), typical for this type of component. A weight comparison of the two blades was performed and the weight of the carbon fiber blade was approximately 45% of the weight of the fiberglass reinforced blade. Static bending tests were carried out on the blades for various percentages of the design load and deflections measurements were compared with the values obtained from finite element simulations. A good agreement was observed between the measured and calculated deflections. In summary, the results of this study confirm that the low density combined with high mechanical properties of carbon fibers are particularly attractive for the production of large size wind turbine blades

Efeito da adição de microfibras de lã de vidro na tenacidade à ruptura de pastas de cimento para poços de petróleo

Although there are a wide variety of additives that act in fresh state, to adjust the properties of cement, there is also a search by additions that improve the tenacity of the cement in the hardened state. This, in turn, can often be increased by inserting fibers, which act on the deflection of microcracks. This study aimed to use a microfiber glass wool (silica-based) as an additive reinforcing the cement matrix, improving the rupture tenacity, in order to prevent the propagation of microcracks in the cement sheath commonly found in oil wells submitted to high temperatures. The fibers were added at different concentrations, 2 to 5% (BWOC) and varied average sizes, grinding for 90 s, 180 s, 300 s, 600 s. The cement slurries were made with a density of 1,90 g/ cm3 (15,6 lb/gal), using Portland cement CPP- Special Class as the hydraulic binder and 40% silica flour. The characterization of the fiber was made by scanning electron microscopy (SEM), particle size by sieving, X-ray fluorescence (XRF), X-ray diffraction (XRD) and thermogravimetry (TG / DTG). Were performed technological tests set by the API (American Petroleum Institute) by rheology, stability, free water, compressive strength, as well as testing rupture energy, elastic modulus and permeability. The characterization results showed good thermal stability of the microfiber glass wool for application in oil wells submitted to steam injection and, also, that from the particle size data, it was possible to suggest that microfibers milled up to 300 s, are ideal to act as reinforcement to the cement slurries. The rheological parameters, there was committal of plastic viscosity when larger lengths were inserted of microfiber (F90). The values obtained by free water and stability were presented according to API. The mechanical properties, the incorporation of microfiber to the cement slurries gave better rupture tenacity, as compared to reference cement slurries. The values of compressive strength, elastic modulus and permeability have been maintained with respect to the reference cement slurries. Thus, cement slurries reinforced with microfiber glass wool can ensure good application for cementing oil wells submitted to steam injection, which requires control of microcracks, due to the thermal gradients

Termoterapia e quimioterapia de banana 'Prata-Anã' associadas à temperatura de armazenamento no controle de podridões em pós-colheita

O objetivo deste estudo foi avaliar o efeito da termoterapia (56 ºC por 6 min) e quimioterapia (propiconazole 250 ml.l-1) associado com temperatura de armazenamento (temperatura ambiente, 18 ºC e 13 ºC) no controle de podridões de bananas (Musa spp.) 'Prata-Anã' (AAB) em pós-colheita. Os tratamentos apresentaram diferenças significativas na percentagem de área lesionada por fruto, perda de peso e coloração externa da casca em todas as temperaturas de armazenamento. A quimioterapia e a combinação termoterapia e quimioterapia evitaram a manifestação de podridões nas três condições de armazenamento, enquanto a termoterapia reduziu a percentagem de área lesionada por fruto de 98% para 11% em temperatura ambiente, de 8% para 7% em 18 ºC e de 10% para 0% em 13 ºC, sendo mais eficiente sob a temperatura de 13 ºC. Frutos não tratados perderam 25%, 10% e 3% de peso e atingiram a cor 7, 5 e 1 em temperatura ambiente, 18 ºC e 13 ºC, respectivamente. Frutos tratados com termoterapia e quimioterapia perderam 24, 11 e 5% e 20, 10 e 3%, e atingiram índice médio de cor 4 e 3,5, respectivamente. O período de conservação foi estendido para 18, 24 e 45 dias em temperatura ambiente, 18 ºC e 13 ºC, respectivamente. A combinação dos métodos evitou a manifestação de podridões, reduziu a perda de peso e manteve a cor da casca e a qualidade dos frutos.

Germinação e armazenamento de sementes de COCA (Erythroxylum ligustrinum DC. - Erythroxylaceae)

O objetivo deste trabalho foi avaliar o efeito da temperatura sobre a germinação e o armazenamento de sementes de Erythroxylum ligustrinum DC. As sementes foram colocadas germinar caixas de plásticas sobre duas folhas de papel, umedecidas com Nistatina 0, 2%, mantidas em germinadores nas temperaturas constantes de 5, 10, 15, 20, 25, 30, 35, 40 e 45ºC e com fotoperíodo de 12 horas. Para o armazenamento, as sementes foram colocadas em sacos de papel, mantidos à temperatura ambiente e em geladeira. em seguida, mensalmente, foi avaliada a germinação das sementes. A temperatura mínima, a faixa de temperatura ideal e a temperatura máxima para germinação de sementes de coca estão entre 10 e 15ºC, 25 e 30ºC e 40 e 45ºC, respectivamente. O armazenamento de sementes coca por longo período é inviável em embalagens de papel na geladeira (10ºC ± 2) e em temperatura ambiente (27ºC ± 5).

Efetividade do flúor e da escovação e eficácia dos materiais de colagem ionômero de vidro e resina composta na reversão das microporosidades criadas pelo condicionamento ácido no esmalte dentário

The objectives of this clinical study was to evaluate the use of the toothpaste with fluoride and without fluoride and the daily tooth brushing are effective in the reversion of the dental enamel conditioned by acid. Another objective of this clinical study was to evaluate if the positioning of orthodontic accessories with glass ionomer cement helps in the reversion of the dental enamel conditioned by acid, when compared to composed resin. One hundred and twenty teeth were selected with indication of extraction by orthodontic reasons. The 30 volunteers were divided, randomly, in two groups. A group used toothpaste without fluoride and the other with it. The teeth of the sample were shuffled, in each volunteer. The teeth were conditioned by the 37% orthophosphoric acid. One of the conditioned teeth stayed in the mouth and suffered action of the abrasion for the tooth brushing, in another teeth a stainless steel mesh protection was positioned with glass ionomer cement, in another tooth the screen was glued with composed resin, in a fourth tooth (the control) was only conditioned after the extractions, 60 days later. All the teeth were appraised through DIAGNOdent, MEVA and EDS. In the obtained data it was possible to observe that there were not statistic significant differences in any comparison, even in the group that did not have access to the fluoride in the toothpaste as in the other that had. According with the used methodology, it was possible to observe too that there was not statistic significant differences in any comparison, even in the group that had the stainless steel mesh positioned with glass ionomer cement as in the group that the stainless steel mesh was positioned with composed resin. However, it was observed that there was an improvement in the topography of the enamel in all the teeth. The accomplishment of this study was facilitated due to the participation of the researchers' of the health area (dentistry), materials engineer, physics and chemistry. The researchers were originating from the Federal University of Rio Grande do Norte and of the University of Queensland, in Australia. This interdisciplinary group was decisive in the accomplishment of the study. It can be concluded that the enamel tends to return to its initial aspect, even if the patient does not have access to fluoride. That is probably due the action of the abrasion for the tooth brushing and mastication. In spite of it not being significant, it is suggested that the conditioned enamel was more resistant to the abrasion in the group that had access to fluoride. It was also possible to conclude that the fluoride liberated by the glass ionomer was not enough to provide a significant difference in the enamel conditioned by the acid, when compared with the composed resin, even in the group that did not use fluoride in the toothpaste as in the group that used

Efeito de períodos de semeadura e das condições de armazenamento sobre a qualidade de grãos de feijão para o cozimento

A conservação adequada pode manter as características do grão recém-colhido por mais tempo, assegurando o valor comercial do produto estocado. Assim, o objetivo deste trabalho foi avaliar o efeito de períodos de semeadura na qualidade de cozimento de grãos de feijão da cultivar TPS Nobre, quando armazenados em diferentes condições de temperatura, de umidade e tempo de estocagem. O delineamento experimental utilizado foi o inteiramente casualizado, com três repetições. Os tratamentos consistiram da combinação de três períodos de semeadura, com três ambientes de armazenamento e três tempos de armazenamento dos grãos (0, 3 e 6 meses). A interpretação dos resultados permitiu inferir que as porcentagens de grãos normais e de grãos duros revelaram comportamento diferenciado em função do ambiente e do tempo de armazenamento. Constatou-se maior porcentagem de grãos duros após seis meses de armazenamento, realizado sob temperatura média do ar de 12 °C e umidade relativa de 45%-50% e também quando os grãos foram resultantes de semeadura realizada tardiamente (21/10/03). A absorção de água e o tempo de cozimento dos grãos de feijão foram alterados em função do período de semeadura, das condições e do tempo de armazenamento, caracterizando a existência de efeitos da interação genótipos x ambientes na qualidade para o cozimento dos grãos. Sendo assim, maior ou menor tempo para a absorção de água ou para o cozimento podem ser requeridos em função da qualidade dos grãos no momento da colheita ou das condições de temperatura e de umidade de armazenamento.

Influência do armazenamento de ramas para plantio em algumas características agronômicas da mandioca

Nas condições do Estado de São Paulo é freqüente o armazenamento de ramas de mandioca (Manihot esculenta Crantz) para aguardar a melhor oportunidade de efetuar o plantio. Utilizam-se os sistemas de empilhamento horizontal e vertical, sendo mais comum o primeiro. Raramente, empregam-se ramas recém-colhidas para plantio. 0 presente trabalho teve por objetivo estudar o efeito do material de plantio em alguns parâmetros fitotécnicos da cultura, em função dos diferentes estádios fisiológicos causados pelo armazenamento ou não das ramas. Num esquema fatorial de 2 x 3, em blocos ao acaso com quatro repetições, utilizaram-se dois cultivares - IAC 12-829 e SRT 1287-Fibra, de alta e baixa capacidade de ramificação respectivamente - e três tipos de manivas, originárias de ramas recém-colhidas e de ramas conservadas por 105 dias nos sistemas de empilhamento horizontal e vertical. O experimento foi desenvolvido no ano agrícola 1991/92, na Estação Experimental do Vale do Paranapanema (IAC), Assis (SP), em latossolo vermelho-escuro, álico, textura média. Os resultados mais relevantes mostraram que: (a) O armazenamento de ramas em pilhas horizontais provocou aumento no número de hastes primárias dos dois cultivares e aumentou o peso da parte aérea do SRT 1287-Fibra; (b) O SRT 1287-Fibra foi mais influenciado pelo armazenamento da rama na posição horizontal que o IAC 12-829; (c) Este, em média, foi superior na produção de raízes, não diferindo, entretanto, do primeiro quando as manivas provinham de ramas armazenadas na posição horizontal; (d) As ramas procedentes do armazenamento na posição vertical comportaram-se similarmente às não armazenadas.

Efeito do armazenamento da calda na eficácia de herbicidas aplicados em pré-emergência (parte II)

Diferentes tipos de pulverizadores são utilizados para a aplicação de herbicidas sendo que, em pequenas propriedades, é comum, por questões econômicas, a adaptação de barras ou pistolas manuais a tanques de grande capacidade. Por outro lado, em grandes propriedades, é crescente a tendência da substituição do sistema tradicional de reabastecimento dos pulverizadores pelo sistema de calda pronta. em ambos os casos, pode haver a necessidade de um armazenamento prolongado nos tanques ou no veículo reabastecedor, principalmente na ocorrência de períodos prolongados de chuva. Torna-se, portanto, importante a determinação de períodos de tempo pelos quais as caldas de herbicidas possam ser armazenadas, sem que haja prejuízo à eficácia dos mesmos. O presente trabalho estudou os efeitos do tempo de armazenamento da calda sobre a eficácia de herbicidas aplicados em pré-emergência. O experimento foi instalado no delineamento experimental de blocos ao acaso, com três repetições, no ano agrícola 91/92, em área da Fazenda Experimental da Faculdade de Ciências Agrárias e Veterinárias da UNESP, município de Jaboticabal, Estado de São Paulo, Brasil. Avaliou-se as formulações comerciais de ametryne e diuron com 00, 05, 10, 15, 20, 25 e 30 dias de armazenamento da calda, além de uma testemunha, onde não se efetuou a aplicação de herbicidas. Foram realizadas contagens do número de emergências e altura, por espécie, das plantas daninhas em 1,2 m2 por parcela, aos 30, 45 e 59 dias após a aplicação e uma avaliação visual do controle geral por parcela aos 95 dias após a aplicação. Os resultados obtidos mostram que nenhum dos períodos de armazenamento testados interferiu significativamente na eficiência dos herbicidas, independente do produto utilizado (teste de F a 5%). Portanto, conclui-se que as caldas dos herbicidas testados puderam ser utilizadas normalmente, quando armazenadas por até 30 dias.