Frequency of antibodies to Babesia bigemina, B. bovis, Anaplasma marginale, Trypanosoma vivax and Borrelia burdgorferi in cattle from the northeastern region of the state of Pará, Brazil

A babesiose, a anaplasmose e a tripanossomose são enfermidades relevantes, potencialmente causadoras de morbidade em bovinos, levando a perdas econômicas. A borreliose assume importância como zoonose potencial. O objetivo desse estudo foi determinar, por meio do ensaio de imunoadsorção enzimática (ELISA), a freqüência de anticorpos para Babesia bigemina, B. bovis, Anaplasma marginale, Trypanosoma vivax e Borrelia burgdorferi em bovinos da região nordeste do Estado do Pará, Brasil. Amostras de soro de 246 vacas dos municípios de Castanhal e São Miguel do Guamá foram usadas. ELISAs com antígeno bruto foram utilizados para detector anticorpos contra todos os agentes, exceto para A. marginale, para o qual um ELISA indireto com proteína principal de superfície 1a (MSP1a) foi usado. As freqüências de bovinos soropositivos foram: B. bigemina - 99,2%; B. bovis - 98,8%; A. marginale - 68,3%; T. vivax - 93,1% and B. burgdorferi -54,9% As freqüências de bovinos soropositivos para B. bovis e B. bigemina sugerem uma alta taxa de transmissão desses organismos por carrapatos, na região estudada, a qual pode ser classificada com sendo de estabilidade enzoótica para os hemoparasitos. A baixa freqüência de bovinos soropositivos para A. marginale pode ser atribuída a uma menor sensibilidade do ELISA com antígeno recombinante, ou uma menor taxa de inoculação da riquétsia pelos carrapatos, quando comparada àquelas observadas para Babesia sp. A alta freqüência de bovinos soropositivos para T. vivax indica que esse hemoprotozoário é prevalente em rebanhos do nordeste do Estado do Pará. O percentual de animais com anticorpos homólogos para B. burgdorferi indica a presenças deste espiroquetídeo transmitido por carrapatos na população de bovinos da região estudada.

Development and assessment of a latex agglutination test based on recombinant MSP5 to detect antibodies against Anaplasma marginale in cattle

The recombinant protein MSP5 has been established as an important antigen for serological diagnosis of Anaplasma marginale by enzyme-linked immunosorbent assay (ELISA). However, due to the high cost of specialized equipment, this technique is not accessible to all laboratories, especially in developing countries in areas where the disease is endemic. The present study describes the standardization of a latex agglutination test (LAT) to detect antibodies against A. marginale based on recombinant MSP5. Compared with indirect enzyme-linked immunosorbent assay (iELISA), the relative sensitivity and specificity of the LAT were 95.21% and 91.86% respectively, with an almost perfect agreement between tests (kappa index = 0.863). These results can be considered important for the serological diagnosis of A. marginale, as they indicate that the test represents a rapid and low cost alternative to ELISA.

Excess body weight and gait influence energy cost of walking in older adults

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Kinetic study of the co-firing of bagasse-sludge blends

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

First report of Myxobolus sp infection in the skeletal muscle of Neotropical freshwater fish Piaractus mesopotamicus

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Maximal Oxygen uptake cannot be determined in the incremental phase of the lactate minimum test on a cycle ergometer

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Longitudinal evaluation of the structural integrity of teeth affected by molar incisor hypomineralisation

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Transposition burst of mariner-like elements in the sequenced genome of Rhodnius prolixus

Transposable elements (TEs) are widespread in insect´s genomes. However, there are wide differences in the proportion of the total DNA content occupied by these repetitive sequences in different species. We have analyzed the TEs present in R. prolixus (vector of the Chagas disease) and showed that 3.0% of this genome is occupied by Class II TEs, belonging mainly to the Tc1-mariner superfamily (1.65%) and MITEs (1.84%). Interestingly, most of this genomic content is due to the expansion of two subfamilies belonging to: irritans himar, a well characterized subfamily of mariners, and prolixus1, one of the two novel subfamilies here described. The high amount of sequences in these subfamilies suggests that bursts of transposition occurred during the life cycle of this family. In an attempt to characterize these elements, we performed an in silico analysis of the sequences corresponding to the DDD/E domain of the transposase gene. We performed an evolutionary analysis including network and Bayesian coalescent-based methods in order to infer the dynamics of the amplification, as well as to estimate the time of the bursts identified in these subfamilies. Given our data, we hypothesized that the TE expansions occurred around the time of speciation of R. prolixus around 1.4 mya. This suggestion lays on the Transposon Model of TE evolution, in which the members of a TE population that are replicative active are present at multiple loci in the genome, but their replicative potential varies, and of the Life Cycle Model that states that when present-day TEs have been involved in amplification bursts, they share an ancestral copy that dates back to this initial amplification.

Optimizing Amplifier Placements in a Multiwavelength Optical LAN/MAN: The Unequally Powered Wavelengths Case

Optical networks based on passive-star couplers and employing WDM have been proposed for deployment in local and metropolitan areas. These networks suffer from splitting, coupling, and attenuation losses. Since there is an upper bound on transmitter power and a lower bound on receiver sensitivity, optical amplifiers are usually required to compensate for the power losses mentioned above. Due to the high cost of amplifiers, it is desirable to minimize their total number in the network. However, an optical amplifier has constraints on the maximum gain and the maximum output power it can supply; thus, optical amplifier placement becomes a challenging problem. In fact, the general problem of minimizing the total amplifier count is a mixed-integer nonlinear problem. Previous studies have attacked the amplifier-placement problem by adding the “artificial” constraint that all wavelengths, which are present at a particular point in a fiber, be at the same power level. This constraint simplifies the problem into a solvable mixed integer linear program. Unfortunately, this artificial constraint can miss feasible solutions that have a lower amplifier count but do not have the equally powered wavelengths constraint. In this paper, we present a method to solve the minimum amplifier- placement problem, while avoiding the equally powered wavelength constraint. We demonstrate that, by allowing signals to operate at different power levels, our method can reduce the number of amplifiers required.

Optimization of Amplifier Placements in Switch-Based Optical Networks

Wavelength division multiplexing (WDM) offers a solution to the problem of exploiting the large bandwidth on optical links; it is the current favorite multiplexing technology for optical communication networks. Due to the high cost of an optical amplifier, it is desirable to strategically place the amplifiers throughout the network in a way that guarantees that all the signals are adequately amplified while minimizing the total number amplifiers being used. Previous studies all consider a star-based network. This paper demonstrates an original approach for solving the problem in switch-based WDM optical network assuming the traffic matrix is always the permutation of the nodes. First we formulate the problem by choosing typical permutations which can maximize traffic load on individual links; then a GA (Genetic Algorithm) is used to search for feasible amplifier placements. Finally, by setting up all the lightpaths without violating the power constaints we confirm the feasibility of the solution.

Comparative electrical behavior at low and high current of SnO(2)- and ZnO-based varistors

The complete I-V characteristics of SnO(2)-based varistors, particularly of the Pianaro system SCNCr consisting in 98.9%SnO(2)+1%CoO+0.05%Nb(2)O(5)+0.05%Cr(2)O(3), all in mol%, have been seldom reported in the literature. A comparative study at low and high currents of the nonohmic behavior of SCNCr- and ZnO-based varistors (modified Matsuoka system) is proposed in this work. The SCNCr system showed higher nonlinearity coefficients in the whole range of measured current. The electrical breakdown field (E(b)) was twice as high for the SCNCr system (5400 V/cm) than for the ZnO varistor (2600 V/cm) due to a smaller average grain size of the former (4.5 mu m) with respect to the latter (8.5 mu m). Nevertheless, we consider that another important factor responsible for the high E(b) in the SCNCr system is the great number of electrically active interfaces (85%) as determined with electrostatic force microscopy (EFM). It was also established that the SCNCr system might be produced in disks of smaller dimensions than that of commercial ZnO-based product, with a 5.0 cm(-1) minimal area-volume (A/V) ratio. The SCNCr reached the saturation current in a short time because of the high resistivity of the grains, which is five times higher than that of the grains in ZnO-based varistors.

Methodology of CO2 emission evaluation in the life cycle of office building facades

The construction industry is one of the greatest sources of pollution because of the high level of energy consumption during its life cycle. In addition to using energy while constructing a building, several systems also use power while the building is operating, especially the air-conditioning system. Energy consumption for this system is related, among other issues, to external air temperature and the required internal temperature of the building. The facades are elements which present the highest level of ambient heat transfer from the outside to the inside of tall buildings. Thus, the type of facade has an influence on energy consumption during the building life cycle and, consequently, contributes to buildings' CO2 emissions, because these emissions are directly connected to energy consumption. Therefore, the aim is to help develop a methodology for evaluating CO2 emissions generated during the life cycle of office building facades. The results, based on the parameters used in this study, show that facades using structural glazing and uncolored glass emit the most CO2 throughout their life cycle, followed by brick facades covered with compound aluminum panels or ACM (Aluminum Composite Material), facades using structural glazing and reflective glass and brick facades with plaster coating. On the other hand, the typology of facade that emits less CO2 is brickwork and mortar because its thermal barrier is better than structural glazing facade and materials used to produce this facade are better than brickwork and ACM. Finally, an uncertainty analysis was conducted to verify the accuracy of the results attained. (C) 2011 Elsevier Inc. All rights reserved.

Water-in-Oil Micro-Emulsion Enhances the Secondary Structure of a Protein by Confinement

A scheme is presented in which an organic solvent environment in combination with surfactants is used to confine a natively unfolded protein inside an inverse microemulsion droplet. This type of confinement allows a study that provides unique insight into the dynamic structure of an unfolded, flexible protein which is still solvated and thus under near-physiological conditions. In a model system, the protein osteopontin (OPN) is used. It is a highly phosphorylated glycoprotein that is expressed in a wide range of cells and tissues for which limited structural analysis exists due to the high degree of flexibility and large number of post-translational modifications. OPN is implicated in tissue functions, such as inflammation and mineralisation. It also has a key function in tumour metastasis and progression. Circular dichroism measurements show that confinement enhances the secondary structural features of the protein. Small-angle X-ray scattering and dynamic light scattering show that OPN changes from being a flexible protein in aqueous solution to adopting a less flexible and more compact structure inside the microemulsion droplets. This novel approach for confining proteins while they are still hydrated may aid in studying the structure of a wide range of natively unfolded proteins.

High prevalence of OXA-143 and alteration of outer membrane proteins in carbapenem-resistant Acinetobacter spp. isolates in Brazil

Carbapenem resistance amongst Acinetobacter spp. has been increasing in the last decade. This study evaluated the outer membrane protein (OMP) profile and production of carbapenemases in 50 carbapenem-resistant Acinetobacter spp. isolates from bloodstream infections. Isolates were identified by API20NE. Minimum inhibitory concentrations (MICs) for carbapenems were determined by broth microdilution. Carbapenemases were studied by phenotypic tests, detection of their encoding gene by polymerase chain reaction (PCR) amplification, and imipenem hydrolysis. Nucleotide sequencing confirming the enzyme gene type was performed using MegaBACE 1000. The presence of OMPs was studied by sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and PCR. Molecular typing was performed using pulsed-field gel electrophoresis (PFGE). All isolates were resistant to carbapenems. Moreover, 98% of the isolates were positive for the gene encoding the enzyme OXA-51-like, 18% were positive for OXA-23-like (only one isolate did not show the presence of the insertion sequence ISAba1 adjacent to this gene) and 76% were positive for OXA-143 enzyme. Five isolates (10%) showed the presence of the IMP-1 gene. Imipenem hydrolysing activity was detected in only three strains containing carbapenemase genes, comprising two isolates containing the bla(IMP) gene and one containing the bla(OXA-51/OXA-23-like) gene. The OMP of 43 kDa was altered in 17 of 25 strains studied, and this alteration was associated with a high meropenem MIC (256 mu g/mL) in 5 of 7 strains without 43 kDa OMP. On the other hand, decreased OMP 33-36 kDa was found in five strains. The high prevalence of OXA-143 and alteration of OMPs might have been associated with a high level of carbapenem resistance. (C) 2012 Elsevier B.V. and the International Society of Chemotherapy. All rights reserved.

Hepatitis B virus genotypes from European origin explains the high endemicity found in some areas from southern Brazil

Southern Brazil is considered an area of low Hepatitis B endemicity, but some areas of higher endemicity have been described in the Southwest of Parana and Santa Catarina states. The aim of this study was to evaluate viral genotypes circulating throughout Parana state. PCR amplification and partial sequencing of the S gene was carried out in 228 samples from HBsAg positive candidate blood donors. Samples have been collected in seven different counties (Cascavel, Curitiba, Foz do Iguacu, Francisco Beltrao, Matinga Londrina and Paranagua). The most common HBV genotype in Parana state was D (82.9%; 189/228), followed by A (14.1%; 32/228). Genotypes F (1.3%; 3/228), C (1.3%; 3/228) and H (0.4%; 1/228) were also found. Distribution of genotypes was different in the studied counties, but genotype D was the most frequent in all of them. In Francisco Beltrao, all studied samples belonged to genotype D. The high prevalence of HBV genotype Din South of Brazil is explained by the intense migration of settlers from Europeans countries. Subgenotypes A1 and A2 were identified circulating in all cities where HBV/A was found. As observed in other areas of Brazil, HBV/A1 is more frequent than the HBV/A2 in Parana state and its presence was significantly larger in black and mulatto individuals. Genotype C was found only in individuals with Asian ancestry from Londrina and Maringa. Most HBV/F sequences identified in this study were classified as subgenotype F2a that was previously described in Brazil. The sole case of subgenotype F4 was from Foz do Iguacu city, near to Northern Argentina, where F4 is highly prevalent. The single genotype H sample was from Curitiba. This is the first case of this genotype described in Brazil. Further studies should be carried out to determine if more genotype H samples can be found in other populations from Brazil. (C) 2012 Elsevier B.V. All rights reserved.