Modified Fixed Effects Estimation of Technical Inefficiency

We consider method of moment fixed effects (FE) estimation of technical inefficiency. When N, the number of cross sectional observations, is large it ispossible to obtain consistent central moments of the population distribution of the inefficiencies. It is well-known that the traditional FE estimator may be seriously upward biased when N is large and T, the number of time observations, is small. Based on the second central moment and a single parameter distributional assumption on the inefficiencies, we obtain unbiased technical inefficiencies in large N settings. The proposed methodology bridges traditional FE and maximum likelihood estimation – bias is reduced without the random effects assumption.

A finite sample improvement of the fixed effects estimator : applied to technical infficiency

The FE ('fixed effects') estimator of technical inefficiency performs poorly when N ('number of firms') is large and T ('number of time observations') is small. We propose estimators of both the firm effects and the inefficiencies, which have small sample gains compared to the traditional FE estimator. The estimators are based on nonparametric kernel regression of unordered variables, which includes the FE estimator as a special case. In terms of global conditional MSE ('mean square error') criterions, it is proved that there are kernel estimators which are efficient to the FE estimators of firm effects and inefficiencies, in finite samples. Monte Carlo simulations supports our theoretical findings and in an empirical example it is shown how the traditional FE estimator and the proposed kernel FE estimator lead to very different conclusions about inefficiency of Indonesian rice farmers.

The effects of Ikea and external shopping centers on regional trade and retail growth : A comparative analysis of Ikea’s establishment in Kalmar and Karlstad

This paper examines the effects of Ikea store establishment in Kalmar and Karlstad on the trade and retail inside the two cities, and as well on the trade and retail in the close neighboring municipalities and in further peripheral municipalities in both regions. After the establishment of Ikea store, Kalmar and Karlstad have experienced significant growth in trade and retail. The question, however, is how big this growth is in both cities? And how different locations on different distances from Ikea have been affected? What impact there was on different segments of the retail? How different business branches have been affected? How large the catchment area for the emerging new large-scale retail locations is? These questions, in addition to few others, are investigated in this paper. The thesis starts with an introduction chapter containing a background of the topic, problem description, the investigated questions, the purpose, and the outline of the paper. The next chapter includes the frame of reference which consists of literature review and theoretical framework about the external shopping centers and their impact on retail and regional trade development. It includes also information gathered from previous studies technical reports and other available sources about the subject. The third chapter includes description for the methods used to collect the primary and secondary data needed for the purpose of this study. Then the empirical framework which demonstrates the results of the conducted research followed by analysis and concluded in discussion and conclusion. Mixed methods are used as research strategy in this thesis, and the method to conduct the research is based on telephone interviews for the primary (qualitative) data, and documents and desk research for the secondary (quantitative) data. The gathered data is analyzed and designed in a way that allows the usage of comparative analysis technique to present the findings and draw conclusions. The results showed that new established Ikea retail store outside the city boundaries results with many effects on the city center and on the neighboring municipalities as well. The city center seems not to be affected negatively, but on the contrary positive effects were witnessed in both regions, these positive effects are linked to the increase inflow of customers from the external retail area which is known as spillover effect. III On the other hand, the neighboring towns and municipalities are more negatively affected especially with the trade of con-convenience goods as the consumers in these towns and municipalities start to go to the area of Ikea and the large external retail center to do their purchasing, the substitution effect is then said to be occurred. Moreover, the further far municipalities do not seem to be significantly affected by the establishment of Ikea. These effects whether positive or negative could be monitored by looking to few trade parameters such as the turnover, the sales index, and the consumers’ expenditure, these parameters can be very useful to measure the developments and changes in the trade and retail in a given place. 

An Environmental Analysis Corroborating PDA and the Winthrop Example

Libraries seek active ways to innovate amidst macroeconomic shifts, growing online education to help alleviate ever-growing schedule conflicts as students juggle jobs and course schedules, as well as changing business models in publishing and evolving information technologies. Patron-driven acquisition (PDA), also known as demand-driven acquisition (DDA), offers numerous strengths in supporting university curricula in the context of these significant shifts. PDA is a business model centered on short-term loans and subsequent purchases of ebooks resulting directly from patrons' natural use stemming from their discovery of the ebooks in library catalogs where the ebooks' bibliographic records are loaded at regular intervals established between the library and ebook supplier. Winthrop University's PDA plan went live in October 2011, and this article chronicles the philosophical and operational considerations, the in-library collaboration, and technical preparations in concert with the library system vendor and ebook supplier. Short-term loan is invoked after a threshold is crossed, typically number of pages or time spent in the ebook. After a certain number of short-term loans negotiated between the library and ebook supplier, the next short-term loan becomes an automatic purchase after which the library owns the ebook in perpetuity. Purchasing options include single-user and multi-user licenses. Owing to high levels of need in college and university environments, Winthrop chose the multi-user license as the preferred default purchase. Only where multi-user licenses are unavailable does the automatic purchase occur with single-user title licenses. Data on initial use between October 2011 and February 2013 reveal that of all PDA ebooks viewed, only 30% crossed the threshold into short-term loans. Of all triggered short-term loans, Psychology was the highest-using. Of all ebook views too brief to trigger short-term loans, Business was the highest-using area. Although the data are still too young to draw conclusions after only a few months, thought-provoking usage differences between academic disciplines have begun to emerge. These differences should be considered in library plans for the best possible curricular support for each academic program. As higher education struggles with costs and course-delivery methods libraries have an enduring lead role.

Feasibility analysis for biofuel production and investment recommendation

A FGV Projetos posiciona-se com destaque no desenvolvimento de projetos e estudos sobre biocombustíveis. Especialistas no assunto apontam para a viabilidade da produção de biocombustíveis em diversos países, e recomendam investimentos em toda a cadeia produtiva, específicos para cada localidade. Isso permitirá aos países que desejam reduzir a dependência por combustíveis fósseis, tais como o petróleo, a diversificação da matriz energética, o aumento do emprego no campo, e uma melhora do saldo comercial. Este documento apresenta síntese dos trabalhos realizados e em desenvolvimento, e tem como base os estudos de viabilidade para a produção de biocombustíveis de El Salvador e da República Dominicana.

Analysis of the ABC Program resources

This is the executive summary of the second of four reports that compose, among others, the activities of the second working year of the ABC Plan Observatory1 . It aims to quantitatively and qualitatively analyze the ABC Program's performance – the main line of credit for the financing of low-carbon agriculture in Brazil. In addition to presenting high points of the results of the 2013/14 crop year, it also reveals a regional and state overview of the distribution of resources and a focus on the Legal Amazon situation regarding the adoption of low carbon agriculture methods in the region. The main theme for the analysis is the spatial distribution of the ABC Program's credit in the country and the reasons, bottlenecks and opportunities for the expansion of more sustainable production methods, especially regarding the conditions of Brazilian technical support and its activities among rural producers.

Analysis of the E-J Curve of HTS Tapes Under DC and AC Magnetic Fields at 77 K

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Fuel cell cogeneration system: a case of technoeconomic analysis

Fuel Cell is the emerging technology of cogeneration, and has been applied successfully in Japan, U.S.A. and some OECD countries. This system produces electric power by an electrolytic process, in which chemical substances (the most utilized substances are solid oxide, phosphoric acid and molten carbonate) absorb the components H-2 and O-2 of the combustion fuel. This technology allows the recovery of residual heat, available from 200 degrees C up to 1000 degrees C (depending on the electrochemical substance utilized), which can be used for the production of steam, hot or cold water, or hot or cold air, depending on the recuperation equipment used. This article presents some configurations of fuel cell cogeneration cycles and a study of the technical and economic feasibility for the installation of the cogeneration systems utilizing fuel cell, connected to an absorption refrigeration system for st building of the tertiary sector, subject to conditions in Brazil. (C) 1999 Elsevier B.V. Ltd. All rights reserved.

Analysis of the performance of an extraction-condensation steam turbine on a cogeneration system of a Brazilian sugar-alcohol factory

In this work a detailed thermodynamic analysis for an extraction-condensation steam turbine capable to drive a 40 MVA electricity generator in a sugar-alcohol factory was carried out. The use of this turbine in the cogeneration system showed that its efficiency contributed to increase the power generation, although the condensation reduces the overall efficiency of the plant. Sensibility analyses were performed to evaluate the behavior of the overall energy efficiency of a plant with the extraction-condensation turbine in function of the boiler efficiency, the specific consumption of steam in the processes and the condensation rate in the turbine. It was observed that the plant efficiency is very sensible to the condensation rate variation and it increases when there is an increase in the demand of steam for processes.

Evaluation of chronic periapical lesions by digital subtraction radiography by using adobe photoshop CS: A technical report

The purpose of this study was to describe a new technique by using Adobe Photoshop CS (San Jose, CA) image-analysis software to evaluate the radiographic changes of chronic periapical lesions after root canal treatment by digital subtraction radiography. Thirteen upper anterior human teeth with pulp necrosis and radiographic image of chronic periapical lesion were endodontically treated and radiographed 0, 2, 4, and 6 months after root canal treatment by using a film holder. The radiographic films were automatically developed and digitized. The radiographic images taken 0, 2, 4, and 6 months after root canal therapy were submitted to digital subtraction in pairs (0 and 2 months, 2 and 4 months, and 4 and 6 months) choosing image, calculation, subtract, and new document tools from Adobe Photoshop CS image-analysis software toolbar. The resulting images showed areas of periapical healing in all cases. According to this methodology, the healing or expansion of periapical lesions can be evaluated by means of digital subtraction radiography by using Adobe Photoshop CS software.

CMS physics technical design report, volume II: Physics performance

CMS is a general purpose experiment, designed to study the physics of pp collisions at 14 TeV at the Large Hadron Collider ( LHC). It currently involves more than 2000 physicists from more than 150 institutes and 37 countries. The LHC will provide extraordinary opportunities for particle physics based on its unprecedented collision energy and luminosity when it begins operation in 2007. The principal aim of this report is to present the strategy of CMS to explore the rich physics programme offered by the LHC. This volume demonstrates the physics capability of the CMS experiment. The prime goals of CMS are to explore physics at the TeV scale and to study the mechanism of electroweak symmetry breaking - through the discovery of the Higgs particle or otherwise. To carry out this task, CMS must be prepared to search for new particles, such as the Higgs boson or supersymmetric partners of the Standard Model particles, from the start- up of the LHC since new physics at the TeV scale may manifest itself with modest data samples of the order of a few fb(-1) or less. The analysis tools that have been developed are applied to study in great detail and with all the methodology of performing an analysis on CMS data specific benchmark processes upon which to gauge the performance of CMS. These processes cover several Higgs boson decay channels, the production and decay of new particles such as Z' and supersymmetric particles, B-s production and processes in heavy ion collisions. The simulation of these benchmark processes includes subtle effects such as possible detector miscalibration and misalignment. Besides these benchmark processes, the physics reach of CMS is studied for a large number of signatures arising in the Standard Model and also in theories beyond the Standard Model for integrated luminosities ranging from 1 fb(-1) to 30 fb(-1). The Standard Model processes include QCD, B-physics, diffraction, detailed studies of the top quark properties, and electroweak physics topics such as the W and Z(0) boson properties. The production and decay of the Higgs particle is studied for many observable decays, and the precision with which the Higgs boson properties can be derived is determined. About ten different supersymmetry benchmark points are analysed using full simulation. The CMS discovery reach is evaluated in the SUSY parameter space covering a large variety of decay signatures. Furthermore, the discovery reach for a plethora of alternative models for new physics is explored, notably extra dimensions, new vector boson high mass states, little Higgs models, technicolour and others. Methods to discriminate between models have been investigated. This report is organized as follows. Chapter 1, the Introduction, describes the context of this document. Chapters 2-6 describe examples of full analyses, with photons, electrons, muons, jets, missing E-T, B-mesons and tau's, and for quarkonia in heavy ion collisions. Chapters 7-15 describe the physics reach for Standard Model processes, Higgs discovery and searches for new physics beyond the Standard Model.

Analysis of procedures used in tooth avulsion by 100 dental surgeons

Accurate diagnosis and adequate treatment plan may constitute very complex tasks, particularly in tooth avulsion, because several variables are involved. In addition to the technical knowledge and clinical experience directed toward the quality of treatment, patient education may favorably influence the survival of replanted teeth. The aim of this study was to analyze the procedures used in the management of tooth avulsion by 100 dental surgeons (DSs). Thus, by means of a descriptive questionnaire, information was obtained about the profile of the professionals interviewed, procedures used in cases of tooth avulsion, and patient orientation and education. One hundred properly filled questionnaires were obtained. Descriptive statistics was used for the data, and the chi-squared statistics was employed (EPI-INFO 3.2 software). According to the results, this type of trauma is part of the routine of 15 DSs, although 71 have reported some experience with avulsed,teeth. Great deficiencies were found regarding root surface treatment and occlusal adjustment. Positive findings were related to socket treatment, adjunctive therapy, and patient education and orientation (extra-alveolar period, storage medium, manipulation of the avulsed tooth, replantation by the own patient). It was possible to conclude that 47.5% of the procedures reported by, 100 professionals interviewed are adequate, and patient education is favorable in 87.7% of cases, a fact that can positively interfere with the prognosis of tooth replantation.

Thermodynamic analysis of the cogeneration system expansion in a sugar-alcohol factory

In this work it was performed energetic and exergetic analyses of three thermal plants to assessment a cogeneration system in expansion of a sugar-alcohol factory. The initial configuration considered is constituted by a low pressure steam generator, single stage steam turbines for electricity generation and crusher, shredder and mills with mechanical driving. In the intermediary configuration, the low pressure steam generator was substituted by another which generates steam at higher pressure and higher temperature, the steam turbines for electricity generation were substituted by a multiple stages extraction-condensation turbine and the other steam turbines were maintained. The final configuration consists in the substitution of these last turbines by electrical motors. Thermodynamic analyses were performed to evaluate the equipment and the overall plants efficiencies to permit a comparison among the plants. Besides of this, some important parameters of the sugar-alcohol factories were calculated.