Decimation Filter Design Toolbox for Multi-Standard Wireless Transceivers using MATLAB.

The demand for new telecommunication services requiring higher capacities, data rates and different operating modes have motivated the development of new generation multi-standard wireless transceivers. A multi-standard design often involves extensive system level analysis and architectural partitioning, typically requiring extensive calculations. In this research, a decimation filter design tool for wireless communication standards consisting of GSM, WCDMA, WLANa, WLANb, WLANg and WiMAX is developed in MATLAB® using GUIDE environment for visual analysis. The user can select a required wireless communication standard, and obtain the corresponding multistage decimation filter implementation using this toolbox. The toolbox helps the user or design engineer to perform a quick design and analysis of decimation filter for multiple standards without doing extensive calculation of the underlying methods.

Evaluation of Auditory Displays Supporting Aircraft Approach and Landing

Abstract: The paper describes an auditory interface using directional sound as a possible support for pilots during approach in an instrument landing scenario. Several ways of producing directional sounds are illustrated. One using speaker pairs and controlling power distribution between speakers is evaluated experimentally. Results show, that power alone is insufficient for positioning single isolated sound events, although discrimination in the horizontal plane performs better than in the vertical. Additional sound parameters to compensate for this are proposed.

Measuring Value in Product Development

“What is value in product development?” is the key question of this paper. The answer is critical to the creation of lean in product development. By knowing how much value is added by product development (PD) activities, decisions can be more rationally made about how to allocate resources, such as time and money. In order to apply the principles of Lean Thinking and remove waste from the product development system, value must be precisely defined. Unfortunately, value is a complex entity that is composed of many dimensions and has thus far eluded definition on a local level. For this reason, research has been initiated on “Measuring Value in Product Development.” This paper serves as an introduction to this research. It presents the current understanding of value in PD, the critical questions involved, and a specific research design to guide the development of a methodology for measuring value. Work in PD value currently focuses on either high-level perspectives on value, or detailed looks at the attributes that value might have locally in the PD process. Models that attempt to capture value in PD are reviewed. These methods, however, do not capture the depth necessary to allow for application. A methodology is needed to evaluate activities on a local level to determine the amount of value they add and their sensitivity with respect to performance, cost, time, and risk. Two conceptual tools are proposed. The first is a conceptual framework for value creation in PD, referred to here as the Value Creation Model. The second tool is the Value-Activity Map, which shows the relationships between specific activities and value attributes. These maps will allow a better understanding of the development of value in PD, will facilitate comparison of value development between separate projects, and will provide the information necessary to adapt process analysis tools (such as DSM) to consider value. The key questions that this research entails are: · What are the primary attributes of lifecycle value within PD? · How can one model the creation of value in a specific PD process? · Can a useful methodology be developed to quantify value in PD processes? · What are the tools necessary for application? · What PD metrics will be integrated with the necessary tools? The research milestones are: · Collection of value attributes and activities (September, 200) · Development of methodology of value-activity association (October, 2000) · Testing and refinement of the methodology (January, 2001) · Tool Development (March, 2001) · Present findings at July INCOSE conference (April, 2001) · Deliver thesis that captures a formalized methodology for defining value in PD (including LEM data sheets) (June, 2001) The research design aims for the development of two primary deliverables: a methodology to guide the incorporation of value, and a product development tool that will allow direct application.

Innovation typology in tourism

Innovation is a research topic with a broad tradition. However, learning processes, from which innovations emerge, and the dynamics of change and development have traditionally been studied in relation with the manufacturing sector. Moreover, the objects of study have been usually process and tangible product innovations. Although recently researchers have focused their attention in other sectors, more research on service innovation should be carried out. Furthermore, regarding innovation in tourism, there is a need to adapt generic theories to the tourism sector and to contribute with new ideas. In order to find out, which are the origins of innovation processes, it is necessary to look into two fundamental subjects that are inherent to innovation, which are learning and interaction. Both are closely related. The first appears to be an intrinsic condition of individuals. Moreover, it can also be identified in organizations. Thus, learning allows individuals as well as organizations to develop. However, learning and development is not possible without taking the environment into account. Hence, it is necessary that interactions take place between individuals, groups of individuals, organizations, etc. Furthermore, the concept of interaction implies the transfer of knowledge, which is the basis for innovations. The purposes of this master thesis are to study in detail several of these topics and to develop a conceptual framework for the research on innovation in tourism

WAIS Seminar:Evaluating the Cognitive Side of Information Interaction

Abstract In this talk, I'll focus on the work we've been doing on evaluating the cognitive side of dealing with information resources and increasingly complex user interfaces. While we can build increasingly powerful user interfaces, they often come at the cost of simple design and ease of use. I'll describe two specific studies: 1) work on the ORCHID project focused on measuring mental workload during tasks using fNIRS (a blood-oxygen-based brain scanner), and 2) a evaluation metric for measuring how much people learn during tasks. Together these provide advances towards understanding the cognitive side of information interaction, in working towards building better tools for users.

Los efectos de la crisis del régimen autoritario en la transición hacia el Frente Nacional en Colombia (1954-1960)

El objetivo de esta monografía es explicar en qué medida los efectos de la crisis del régimen autoritario del General Gustavo Rojas Pinilla influyeron en la transición hacia el Frente Nacional (FN) en Colombia entre 1954 y 1960. Este caso ilustra bien cómo los efectos de la crisis del régimen autoritario de Rojas, es decir, los problemas políticos y sociales no resueltos u originados durante su Gobierno, determinaron en gran medida la modalidad de la transición hacia el FN y el diseño institucional del régimen de coalición. El examen de este fenómeno de cambio político a la luz del cuerpo teórico y conceptual de las transiciones democráticas implicó realizar la periodización en etapas transicionales del caso de estudio, analizar la interacción entre los actores, sus estrategias y los procesos políticos en cada una de ellas, y emplear una serie de conceptos clave para evaluar la transición hacia el FN.

Impacto de los factores interculturales en la implementación de un efectivo control de gestión en las organizaciones

Este trabajo pretende de una manera tanto teórica como práctica, estudiar la relación que pueda existir entre la interculturalidad y el Management Control System, para ello se realiza una revisión bibliográfica de los trabajos empíricos y teóricos desarrollados hasta el momento sobre el tema. Se comienza con la revisión de los diferentes conceptos que puedan hacer alusión a la interculturalidad, y los MCS (o contemple variables cercanas en relación a este), se delimita el tema y se procede a su clasificación hasta llegar a la estructuración de la definición de los constructos que integren los conceptos de interculturalidad y MCS. De igual manera, se operacionalizan las variables para poder generar un análisis practico utilizando estadística cuantitativa. Finalmente presentamos los resultados que demuestran el grado de importancia percibido por encuestados de filiales localizadas en diferentes países de Latino América de la empresa Agrocampo S.A.S, con el fin de presentar conclusiones que integren los dos temas de análisis.

Territorialización de la inseguridad ciudadana en Bogotá: La Calle del Bronx

La tesis devela la connotación sistemática y multicausal de lo que a través de la investigación se denomina como "Procesos de Territorialización de la Inseguridad Ciudadana". Mediante un estudio de caso, se pone en evidencia la apropiación y captura sostenida en el tiempo de fenómenos como la inseguridad y la criminalidad, sobre determinadas zonas o barrios urbanos que por sus características socioeconómicas, políticas, geográficas, culturales, laborales y de mercado de quienes los habitan o frecuentan, se consideran como sectores "críticos y/o vulnerables".

Utilidad de la relación estratégica comunitaria y el marketing en el sector de extracción de petróleo crudo y gas natural

El presente trabajo pretende investigar y analizar la utilidad de las relaciones estratégicas comunitarias y el marketing en el sector de extracción de petróleo crudo y gas natural. El mercadeo juega un papel importante a la hora de vender cualquier tipo de producto o servicio. Dependiendo de las características de cada sector, las estrategias de mercadeo pueden llegar a ser más o menos útiles y/o efectivas que otras. Por esta razón, esta investigación pretende analizar la utilidad de las estrategias de marketing comunitario y marketing en el sector de extracción de petróleo crudo y gas natural. La forma de llegar a esa respuesta, puede hallarse por medio de tres caminos: el primero de ellos es encontrar y analizar las características del sector, el segundo es identificar cuáles son las estrategias que están utilizando las empresas que operan este campo, y por último, consistiría en analizar la utilidad de integrar el concepto de relación estratégica comunitaria y marketing al sector de extracción de petróleo crudo y gas natural, en cuanto a los beneficios que el marketing comunitario le traería al sector de interés. El sector de petróleo crudo y gas natural es uno de los más importantes en la economía global y sus clientes son numerosos y totalmente heterogéneos. El mercadeo se vuelve muy complejo para esta industria ya que al tener tipos de clientes tan distintos se dificulta alcanzar las expectativas de cada uno de ellos con una misma estrategia y por supuesto la forma de vender un producto es más compleja. Estos factores mencionados anteriormente están generando relaciones entre empresas y clientes totalmente transaccionales de corto plazo, y es ahí donde se cree que la inclusión de mercadeo relacional y estrategias de mercadeo relacional pueden ser de utilidad para el sector, generando desarrollo y beneficios mutuos tanto para clientes como empresas.

Canad?? : informe de evaluaci??n nacional

Resumen del autor. Resumen en castellano y en ingl??s. Este art??culo se incluye en el monogr??fico 'Sistemas nacionales de evaluaci??n'

An automatic correction tool for relational database schemas

A Web-based tool developed to automatically correct relational database schemas is presented. This tool has been integrated into a more general e-learning platform and is used to reinforce teaching and learning on database courses. This platform assigns to each student a set of database problems selected from a common repository. The student has to design a relational database schema and enter it into the system through a user friendly interface specifically designed for it. The correction tool corrects the design and shows detected errors. The student has the chance to correct them and send a new solution. These steps can be repeated as many times as required until a correct solution is obtained. Currently, this system is being used in different introductory database courses at the University of Girona with very promising results

A web 2.0 user interface for wide-area resource monitoring

Resource monitoring in distributed systems is required to understand the 'health' of the overall system and to help identify particular problems, such as dysfunctional hardware or faulty system or application software. Monitoring systems such as GridRM provide the ability to connect to any number of different types of monitoring agents and provide different views of the system, based on a client's particular preferences. Web 2.0 technologies, and in particular 'mashups', are emerging as a promising technique for rapidly constructing rich user interfaces, that combine and present data in intuitive ways. This paper describes a Web 2.0 user interface that was created to expose resource data harvested by the GridRM resource monitoring system.

Norms-based simulation for personalised service provision

User interfaces have the primary role of enabling access to information meeting individual users' needs. However, the user-systems interaction is still rigid, especially in support of complex environments where various types of users are involved. Among the approaches for improving user interface agility, we present a normative approach to the design interfaces of web applications, which allow delivering users personalized services according to parameters extracted from the simulation of norms in the social context. A case study in an e-Government context is used to illustrate the implications of the approach.

A framework for comparing pollinator performance: effectiveness and efficiency

Measuring pollinator performance has become increasingly important with emerging needs for risk assessment in conservation and sustainable agriculture that require multi-year and multi-site comparisons across studies. However, comparing pollinator performance across studies is difficult because of the diversity of concepts and disparate methods in use. Our review of the literature shows many unresolved ambiguities. Two different assessment concepts predominate: the first estimates stigmatic pollen deposition and the underlying pollinator behaviour parameters, while the second estimates the pollinator’s contribution to plant reproductive success, for example in terms of seed set. Both concepts include a number of parameters combined in diverse ways and named under a diversity of synonyms and homonyms. However, these concepts are overlapping because pollen deposition success is the most frequently used proxy for assessing the pollinator’s contribution to plant reproductive success. We analyse the diverse concepts and methods in the context of a new proposed conceptual framework with a modular approach based on pollen deposition, visit frequency, and contribution to seed set relative to the plant’s maximum female reproductive potential. A system of equations is proposed to optimize the balance between idealised theoretical concepts and practical operational methods. Our framework permits comparisons over a range of floral phenotypes, and spatial and temporal scales, because scaling up is based on the same fundamental unit of analysis, the single visit.