A study on damage caused to crustacean and finfish larvae during collection of Penaeus monodon (Fab.) postlarvae in the estuaries of Barguna, Bangladesh

A year round investigation in the estuaries of Barguna district revealed that for each Penaeus monodon postlarvae (PL), about 37 larvae of other shrimp species, 12 finfishes and 10 macrozooplankters are destroyed during the process of shrimp seed collection. Although abundance of P. monodon PL was not recorded throughout the year, a significant number of other shrimp spp., fin fishes including macrozooplankters are being damaged by the shrimp seed collectors. This indiscriminate destruction of aquatic organisms during P. monodon PL collection is serious threat to aquatic biodiversity.

Colossal loss of shell and fin-fish larvae during collection of Penaeus monodon (Fab.) fry in the rivers of Satkhira

This study was conducted in five river-estuaries of Satkhira from January to December '96. It was found that during the collection of each Peneaus monodon) post larva (PL), about 45 larvae of other shrimps, 12 individuals of fin-fishes and 530 macro-zooplankters were mercilessly destroyed. It was also recorded that about 11.6 million of P. monodon PLs were harvested annually from the study area. The sh1dy implies that colossal loss of shell and fin-fishes and other plankton resources is done by tiger shrimp fry collectors, and such massive destruction adversely affect the natural productivity and ecological balance of the coastal environment.

Present status of harvesting, transportation and marketing of freshwater Small Indigenous Species of Fish (SIS) of Bangladesh

A survey conducted to evaluate the present status of harvesting, transportation and marketing of freshwater SIS of Bangladesh showed that among the 56 to 73 species of small indigenous fish species (SIS), mola (Amblypharyngodon mola), dhela (Osteobrama cotio cotio), puti (Barbodes sarana), tit puti (Puntius ticto), tengra (Mystus vitatus), chapila ( Gudusia chapra), batashi (Pseudotropius atherinoides), buzuri tengra (Mystus tengra), katchki (Corika soborna), gol chanda (Chanda ranga), lamba chanda (Chanda nama), phul chela (Chela phulo) and lata (Channa punctatus) are the most common. But the abundance of the mola, puti, tengra, batashi and chapila are higher than the other SIS species. Puti was at the top of the list in percentage abundance (7-9%), followed by mola (7-8%), tengra 6-7% and chapila 5-6% in all the investigated areas. Three levels of market or marketing systems were observed in the distribution channel of fish trade: primary, secondary/higher secondary and final consuming markets. Primary market is the catching point in the rural area. In secondary market, the collectors bring the fish from primary market to the landing ghats, usually to the nearest thana market or at a place well linked by rivers, road and rail transport. On purchasing the fish from the higher secondary market, the paikars sell the fish to the retailers who take it to the final consumer market. Different types of crafts and gears are used for catching the SIS in Bangladesh. Monofilament gill nets (20%), traps and line nets (25%) and seine nets (25%) are the dominant gears in respect of the total catch followed by lift net (10%) and cast net (20%). A total of 10 types of gear are listed according to their mode of operation which used for catching SIS. The processors in consumer market received higher marketing profit followed by primary market and secondary market, respectively.

Socioeconomic assessment of shrimp farming in relation to local livelihoods in the south-west coastal Bangladesh

Nine different categories of stakeholders in shrimp farming industry ·were assessed to show the socioeconomic impact of shrimp farming in south-west Bangladesh. Among all the stakeholders the shrimp farmer's average own land was 4 ha whereas the seed collectors and faria's had lowest amount of average land, 0.1 and 0.5 ha respectively. The shrimp farming positively impacted to the livelihood of stakeholders. Income of the coastal people, sanitation, working facilities of women, employment, health condition and the literacy rate increased due to shrimp farming. On the other hand shrimp farming had negative impact on the rice production, livestock, drinking water supply, and social conflict and violence had increased due to shrimp farming. There were internal conflicts between different stakeholders; the farias conflict with the depot owners and shrimp farmers, marginal farmers' conflict with the rich shrimp farmers about leasing lands and saline water control, the rice farmers conflicts with the shrimp farmers about agricultural crop production.

An experimental assessment of the aquaculture potential of the brown mussel, Modiolus metcalfei

A study was conducted at Banate Bay, Iloilo, from November 1975 to March 1976. Trials were conducted using spat collectors of four types, but no Modiolus metcalfei spat settled on any of the experimental collectors during the entire study period. Instead they attached to the exposed posterior half of the living Modiolus collected for reproductive cycle studies. The aquaculture potential of the brown mussel is considered to be low. Improvement of its production potential should be approached along the line of resource management rather than aquaculture. This management should be aimed at two objectives: (1) maintenance of enough adults on settlement surfaces, and (2) provision of space to allow new recruitments to grow. A possible solution, therefore, is controlled harvesting or thinning after the peak in the settlement season. In this manner, the chances of the mussel bed recovering year after year may be enhanced.

Fundamental study on the behavior of milkfish fry for the evaluation of the efficiency of traditional fry collecting gears in the Philippines

The response of Chanos chanos fry to moving and stationary nets of different mesh size and colour, underwater visibility of the nets and water filtration were studied. Results indicate that milkfish fry may be driven by nets of mesh size larger than that presently used; larger mesh size decreases the net resistance in the water so that collectors may move the equipment easily. The large mesh nets should be of a dark colour, preferably black for effective driving; bowever white mosquito net is best for the core end, since the fry are more easily visible on a white background.

Preliminary studies on predicting the setting season of oysters for the benefit of shellfish farmers

Preliminary findings from a spatfall forecasting programme initiated in April 1981 at Himamaylan River, Negros Occidental are presented. Two main activities are involved: 1) monitoring of daily counts of oyster larvae in the plankton; and 2) monitoring of actual setting of oysters on standardized collectors put in the vicinity of oyster farm sites. Findings indicate that when the count of mature larvae exceeds 5 per 100 ml sample and persists for at least 3 days, spat may be expected to occur shortly afterwards.

The role of satellite lakes in conservation of fish species diversity in the Lake Kyoga basin

Lakes Victoria and Kyoga had, a diverse fish fauna, which was important as food for local population and valuable in scientific studies. Over the past twenty years, the diversity of fish in these lakes had declined due to over-exploitation, introduction of new fish species including the piscivorous Nile perch and degradation of fish habitat. Studies of satellite lakes in the Victoria and Kyoga lake basins suggested that some of these lakes harboured species which had been lost from the main lakes. In order to better understand the extent, to which these satellite lakes may serve as refugia, a faunal survey was undertaken to determine the distribution and nature of the taxa found. Seven satellite lakes and the eastern end of the main Lake Kyoga adjacent to these minor lakes were surveyed over a two-year period for fish species diversity. A total of 68 fish species were recorded of which 41 were haplochromines. Almost all the native non cichlids which occurred in the main lakes (Victoria and Kyoga) before the Nile perch upsurge recorded. Lakes Nawampasa, Gigati, Kawi, Agu and Nyaguo had the highest fish species and trophic diversity. The trophic diversity of haplochromines (based on Shannon Weaver Index) was highest in Lake Nawampasa (1.28), followed by Gigati (1.25), Kawi (1.18), Agu (0.8), Lemwa (0.81), Nyaguo (0.35) and was lowest in the main Lake Kyoga. Potential threats to these lakes were from collectors of ornamental fish species, especially the haplochromines, the spread of the predatory Nile perch and the water hyacinth, which are already in Lake Kyoga, and the destruction of macrophytes through harvesting of papyrus and reclamation for agriculture. The human population around these lakes harvested the fishes for food but the levels of exploitation were still low because the lakes were adjacent to main Lake Kyoga, the major supply of fish. Ornamental fish dealers were encouraged to start captive breeding of the fish for export to reduce pressure on the lakes and demonstrations for breeding were set up at FIRI in Jinja. Meetings and seminars were held with some of the communities living around the lakes sampled and the importance of fish species found in these lakes and the dangers of destructive practices discussed. Representatives of all taxa of fish caught from the lakes were preserved, catalogued and stored in the FIRI Museum. Results from this survey support the motion that these satellite lakes are important refugia for endemic diversity. Based on survey, we recommend that SaIne of these lakes like Nawampasa, Gigati, Kawi, Agu and Nyaguo could be designated as conservation areas of species threatened in the main lakes. One of the factors that seem to have prevented the spread of Nile perch into Kyoga Minor lakes seems to have been the presence of extensive swamps around these lakes and the low oxygen levels that exist in these habitats. Clearing of swamps and vegetation that separate Kyoga minor lakes from the main lake should be avoided to prevent Nile perch from spreading into these lakes.

One step self-aligned multilayer patterning process for the fabrication of organic complementary circuits in combination with inkjet printing

Recent development of solution processable organic semiconductors delineates the emergence of a new generation of air-stable, high performance p- and n-type materials. This makes it indeed possible for printed organic complementary circuits (CMOS) to be used in real applications. The main technical bottleneck for organic CMOS to be adopted as the next generation organic integrated circuit is how to deposit and pattern both p- and n-type semiconductor materials with high resolutions at the same time. It represents a significant technical challenge, especially if it can be done for multiple layers without mask alignment. In this paper, we propose a one-step self-aligned fabrication process which allows the deposition and high resolution patterning of functional layers for both p- and n-channel thin film transistors (TFTs) simultaneously. All the dimensional information of the device components is featured on a single imprinting stamp, and the TFT-channel geometry, electrodes with different work functions, p- and n-type semiconductors and effective gate dimensions can all be accurately defined by one-step imprinting and the subsequent pattern transfer process. As an example, we have demonstrated an organic complementary inverter fabricated by 3D imprinting in combination with inkjet printing and the measured electrical characteristics have validated the feasibility of the novel technique. © 2012 Elsevier B.V. All rights reserved.

The development of a scanning strategy for the manufacture of porous biomaterials by selective laser melting.

Porous structures are used in orthopaedics to promote biological fixation between metal implant and host bone. In order to achieve rapid and high volumes of bone ingrowth the structures must be manufactured from a biocompatible material and possess high interconnected porosities, pore sizes between 100 and 700 microm and mechanical strengths that withstand the anticipated biomechanical loads. The challenge is to develop a manufacturing process that can cost effectively produce structures that meet these requirements. The research presented in this paper describes the development of a 'beam overlap' technique for manufacturing porous structures in commercially pure titanium using the Selective Laser Melting (SLM) rapid manufacturing technique. A candidate bone ingrowth structure (71% porosity, 440 microm mean pore diameter and 70 MPa compression strength) was produced and used to manufacture a final shape orthopaedic component. These results suggest that SLM beam overlap is a promising technique for manufacturing final shape functional bone ingrowth materials.

Warping trajectories for video synchronization

Temporal synchronization of multiple video recordings of the same dynamic event is a critical task in many computer vision applications e.g. novel view synthesis and 3D reconstruction. Typically this information is implied, since recordings are made using the same timebase, or time-stamp information is embedded in the video streams. Recordings using consumer grade equipment do not contain this information; hence, there is a need to temporally synchronize signals using the visual information itself. Previous work in this area has either assumed good quality data with relatively simple dynamic content or the availability of precise camera geometry. In this paper, we propose a technique which exploits feature trajectories across views in a novel way, and specifically targets the kind of complex content found in consumer generated sports recordings, without assuming precise knowledge of fundamental matrices or homographies. Our method automatically selects the moving feature points in the two unsynchronized videos whose 2D trajectories can be best related, thereby helping to infer the synchronization index. We evaluate performance using a number of real recordings and show that synchronization can be achieved to within 1 sec, which is better than previous approaches. Copyright 2013 ACM.

Synchronization of user-generated videos through trajectory correspondence and a refinement procedure

Temporal synchronization of multiple video recordings of the same dynamic event is a critical task in many computer vision applications e.g. novel view synthesis and 3D reconstruction. Typically this information is implied through the time-stamp information embedded in the video streams. User-generated videos shot using consumer grade equipment do not contain this information; hence, there is a need to temporally synchronize signals using the visual information itself. Previous work in this area has either assumed good quality data with relatively simple dynamic content or the availability of precise camera geometry. Our first contribution is a synchronization technique which tries to establish correspondence between feature trajectories across views in a novel way, and specifically targets the kind of complex content found in consumer generated sports recordings, without assuming precise knowledge of fundamental matrices or homographies. We evaluate performance using a number of real video recordings and show that our method is able to synchronize to within 1 sec, which is significantly better than previous approaches. Our second contribution is a robust and unsupervised view-invariant activity recognition descriptor that exploits recurrence plot theory on spatial tiles. The descriptor is individually shown to better characterize the activities from different views under occlusions than state-of-the-art approaches. We combine this descriptor with our proposed synchronization method and show that it can further refine the synchronization index. © 2013 ACM.

Tailoring carbon nanostructure for high frequency supercapacitor operation

The possibility of enhancing the frequency performance of electrochemical capacitors by tailoring the nanostructure of the carbon electrode to increase electrolyte permeability is demonstrated. Highly porous, vertically oriented carbon electrodes which are in direct electrical contact with the metallic current collector are produced via MPECVD growth on metal foils. The resulting structure has a capacitance and frequency performance between that of an electrolytic capacitor and an electrochemical capacitor. Fully packaged devices are produced on Ni and Cu current collectors and performance compared to state-of-the-art electrochemical capacitors and electrolytic capacitors. The extension of capacitive behavior to the AC regime (100 Hz) opens up an avenue for a number of new applications where physical volume of the capacitor may be significantly reduced. © 2014 Pritesh Hiralal et al.

Micropatterning of polymeric semiconductor by selective lift-off method using epoxy mold

A simple and efficient method for patterning polymeric semiconductors for applications in the field of organic electronics is proposed. The entire polymer layer, except for the desired pattern, is selectively lifted off from a flat poly(dimethylsiloxane) (PDMS) stamp surface by an epoxy mold with a relief pattern. This is advantageous because the elastic deformation of the PDMS stamp around protrusions of a patterned stamp under pressure can assist the plastic deformation of a polymer film along the pattern edges, yielding large area and high quality patterns, and the PDMS surface has low surface energy, which allows the easy removal of the polymer film.

Micropatterning of metal films coated on polymer surfaces with epoxy mold and its application to organic field effect transistor fabrication

In this letter, a simple and versatile approach to micropatterning a metal film, which is evaporated on a Si substrate coated with polymer, is demonstrated by the use of a prepatterned epoxy mold. The polymer interlayer between the metal and the Si substrate is found important for the high quality pattern. When the metal-polymer-Si sandwich structure is heated with the temperature below T-m but above T-g of the polymer, the plastic deformation of the polymer film occurs under sufficiently high pressure applied. It causes the metal to crack locally or weaken along the pattern edges. Further heating while applying a lower pressure results in the formation of an intimate junction between the epoxy stamp and the metal film. Under these conditions the epoxy cures further, ensuring adhesion between the stamp and the film. The lift-off process works because the adhesion between the epoxy and the metal film is stronger than that between the metal film and the polymer. A polymer field effect transistor is fabricated in order to demonstrate potential applications of this micropatterning approach.