Addressing animal health knowledge gaps in Southern Countries: the creation of a 2D animal health resource room

Livestock are a key asset for the global poor. However, access to relevant information is a critical issue for both livestock development practitioners and the poor themselves. Therefore, the following paper details the creation of an on-line Animal Health Resource Room. The aim was to create an immersive environment, which mimics the benefits of a 3D Virtual Learning Environment without the constraints on download times. Therefore, in the following paper key issues in the dissemination of such a platform such as connectivity and speed are explored within the wider context of the development of the tool itself.

A 3D cloud-construction algorithm for the EarthCARE satellite mission

This article presents and assesses an algorithm that constructs 3D distributions of cloud from passive satellite imagery and collocated 2D nadir profiles of cloud properties inferred synergistically from lidar, cloud radar and imager data. It effectively widens the active–passive retrieved cross-section (RXS) of cloud properties, thereby enabling computation of radiative fluxes and radiances that can be compared with measured values in an attempt to perform radiative closure experiments that aim to assess the RXS. For this introductory study, A-train data were used to verify the scene-construction algorithm and only 1D radiative transfer calculations were performed. The construction algorithm fills off-RXS recipient pixels by computing sums of squared differences (a cost function F) between their spectral radiances and those of potential donor pixels/columns on the RXS. Of the RXS pixels with F lower than a certain value, the one with the smallest Euclidean distance to the recipient pixel is designated as the donor, and its retrieved cloud properties and other attributes such as 1D radiative heating rates are consigned to the recipient. It is shown that both the RXS itself and Moderate Resolution Imaging Spectroradiometer (MODIS) imagery can be reconstructed extremely well using just visible and thermal infrared channels. Suitable donors usually lie within 10 km of the recipient. RXSs and their associated radiative heating profiles are reconstructed best for extensive planar clouds and less reliably for broken convective clouds. Domain-average 1D broadband radiative fluxes at the top of theatmosphere(TOA)for (21 km)2 domains constructed from MODIS, CloudSat andCloud–Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) data agree well with coincidental values derived from Clouds and the Earth’s Radiant Energy System (CERES) radiances: differences betweenmodelled and measured reflected shortwave fluxes are within±10Wm−2 for∼35% of the several hundred domains constructed for eight orbits. Correspondingly, for outgoing longwave radiation∼65% are within ±10Wm−2.

Root phenomics of crops: opportunities and challenges

Reliable techniques for screening large numbers of plants for root traits are still being developed, but include aeroponic, hydroponic and agar plate systems. Coupled with digital cameras and image analysis software, these systems permit the rapid measurement of root numbers, length and diameter in moderate ( typically <1000) numbers of plants. Usually such systems are employed with relatively small seedlings, and information is recorded in 2D. Recent developments in X-ray microtomography have facilitated 3D non-invasive measurement of small root systems grown in solid media, allowing angular distributions to be obtained in addition to numbers and length. However, because of the time taken to scan samples, only a small number can be screened (typically<10 per day, not including analysis time of the large spatial datasets generated) and, depending on sample size, limited resolution may mean that fine roots remain unresolved. Although agar plates allow differences between lines and genotypes to be discerned in young seedlings, the rank order may not be the same when the same materials are grown in solid media. For example, root length of dwarfing wheat ( Triticum aestivum L.) lines grown on agar plates was increased by similar to 40% relative to wild-type and semi-dwarfing lines, but in a sandy loam soil under well watered conditions it was decreased by 24-33%. Such differences in ranking suggest that significant soil environment-genotype interactions are occurring. Developments in instruments and software mean that a combination of high-throughput simple screens and more in-depth examination of root-soil interactions is becoming viable.

Issues and benefits of using 3D Interfaces: visual and verbal tasks

Spatial memory is important for locating objects in hierarchical data structures, such as desktop folders. There are, however, some contradictions in literature concerning the effectiveness of 3D user interfaces when compared to their 2D counterparts. This paper uses a task-based approach in order to investigate the effectiveness of adding a third dimension to specific user tasks, i.e. the impact of depth on navigation in a 3D file manager. Results highlight issues and benefits of using 3D interfaces for visual and verbal tasks, and introduces the possible existence of a correlation between aptitude scores achieved on the Guilford- Zimmerman Orientation Survey and Electroencephalography- measured brainwave activity as participants search for targets of variable perceptual salience in 2D and 3D environments.

Nuclear Factor-kappaB controls the reaggregation of 3D neurosphere cultures in vitro

The approach of reaggregation involves the regeneration and self-renewal of histotypical 3D spheres from isolated tissue kept in suspension culture. Reaggregated spheres can be used as tumour, genetic, biohybrid and neurosphere models. In addition the functional superiority of 3D aggregates over conventional 2D cultures developed the use of neurospheres for brain engineering of CNS diseases. Thus 3D aggregate cultures created enormous interest in mechanisms that regulate the formation of multicellular aggregates in vitro. Here we analyzed mechanisms guiding the development of 3D neurosphere cultures. Adult neural stem cells can be cultured as self-adherent clusters, called neurospheres. Neurospheres are characterised as heterogeneous clusters containing unequal stem cell sub-types. Tumour necrosis factor-alpha (TNF-alpha is one of the crucial inflammatory cytokines with multiple actions on several cell types. TNF-alpha strongly activates the canonical Nuclear Factor Kappa-B (NF- kappaB) pathway. In order to investigate further functions of TNF in neural stem cells (NSCs) we tested the hypothesis that TNF is able to modulate the motility and/or migratory behaviour of SVZ derived adult neural stem cells. We observed a significantly faster sphere formation in TNF treated cultures than in untreated controls. The very fast aggregation of isolated NSCs (<2h) is a commonly observed phenomenon, though the mechanisms of 3D neurosphere formation remain largely unclear. Here we demonstrate for the first time, increased aggregation and enhanced motility of isolated NSCs in response to the TNF-stimulus. Moreover, this phenomenon is largely dependent on activated transcription factor NF-kappaB. Both, the pharmacological blockade of NF-kappaB pathway by pyrrolidine dithiocarbamate (PDTC) or Bay11-7082 and genetic blockade by expression of a transdominant-negative super-repressor IkappaB-AA1 led to decreased aggregation.

Using the Technology Acceptance Model to explore community dwelling older adults’ perceptions of a 3D interior design application to facilitate pre-discharge home adaptations

Background In the UK occupational therapy pre-discharge home visits are routinely carried out as a means of facilitating safe transfer from the hospital to home. Whilst they are an integral part of practice, there is little evidence to demonstrate they have a positive outcome on the discharge process. Current issues for patients are around the speed of home visits and the lack of shared decision making in the process, resulting in less than 50 % of the specialist equipment installed actually being used by patients on follow-up. To improve practice there is an urgent need to examine other ways of conducting home visits to facilitate safe discharge. We believe that Computerised 3D Interior Design Applications (CIDAs) could be a means to support more efficient, effective and collaborative practice. A previous study explored practitioners perceptions of using CIDAs; however it is important to ascertain older adult’s views about the usability of technology and to compare findings. This study explores the perceptions of community dwelling older adults with regards to adopting and using CIDAs as an assistive tool for the home adaptations process. Methods Ten community dwelling older adults participated in individual interactive task-focused usability sessions with a customised CIDA, utilising the think-aloud protocol and individual semi-structured interviews. Template analysis was used to carry out both deductive and inductive analysis of the think-aloud and interview data. Initially, a deductive stance was adopted, using the three pre-determined high-level themes of the technology acceptance model (TAM): Perceived Usefulness (PU), Perceived Ease of Use (PEOU), Actual Use (AU). Inductive template analysis was then carried out on the data within these themes, from which a number of sub-thmes emerged. Results Regarding PU, participants believed CIDAs served as a useful visual tool and saw clear potential to facilitate shared understanding and partnership in care delivery. For PEOU, participants were able to create 3D home environments however a number of usability issues must still be addressed. The AU theme revealed the most likely usage scenario would be collaborative involving both patient and practitioner, as many participants did not feel confident or see sufficient value in using the application autonomously. Conclusions This research found that older adults perceived that CIDAs were likely to serve as a valuable tool which facilitates and enhances levels of patient/practitioner collaboration and empowerment. Older adults also suggested a redesign of the interface so that less sophisticated dexterity and motor functions are required. However, older adults were not confident, or did not see sufficient value in using the application autonomously. Future research is needed to further customise the CIDA software, in line with the outcomes of this study, and to explore the potential of collaborative application patient/practitioner-based deployment.

Neuronal-glial populations form functional networks in a biocompatible 3D scaffold

Monolayers of neurons and glia have been employed for decades as tools for the study of cellular physiology and as the basis for a variety of standard toxicological assays. A variety of three dimensional (3D) culture techniques have been developed with the aim to produce cultures that recapitulate desirable features of intact. In this study, we investigated the effect of preparing primary mouse mixed neuron and glial cultures in the inert 3D scaffold, Alvetex. Using planar multielectrode arrays, we compared the spontaneous bioelectrical activity exhibited by neuroglial networks grown in the scaffold with that seen in the same cells prepared as conventional monolayer cultures. Two dimensional (monolayer; 2D) cultures exhibited a significantly higher spike firing rate than that seen in 3D cultures although no difference was seen in total signal power (<50 Hz) while pharmacological responsiveness of each culture type to antagonism of GABAAR, NMDAR and AMPAR was highly comparable. Interestingly, correlation of burst events, spike firing and total signal power (<50 Hz) revealed that local field potential events were associated with action potential driven bursts as was the case for 2D cultures. Moreover, glial morphology was more physiologically normal in 3D cultures. These results show that 3D culture in inert scaffolds represents a more physiologically normal preparation which has advantages for physiological, pharmacological, toxicological and drug development studies, particularly given the extensive use of such preparations in high throughput and high content systems.

Automatic contour extraction from 2D neuron images

This work describes a novel methodology for automatic contour extraction from 2D images of 3D neurons (e.g. camera lucida images and other types of 2D microscopy). Most contour-based shape analysis methods cannot be used to characterize such cells because of overlaps between neuronal processes. The proposed framework is specifically aimed at the problem of contour following even in presence of multiple overlaps. First, the input image is preprocessed in order to obtain an 8-connected skeleton with one-pixel-wide branches, as well as a set of critical regions (i.e., bifurcations and crossings). Next, for each subtree, the tracking stage iteratively labels all valid pixel of branches, tip to a critical region, where it determines the suitable direction to proceed. Finally, the labeled skeleton segments are followed in order to yield the parametric contour of the neuronal shape under analysis. The reported system was successfully tested with respect to several images and the results from a set of three neuron images are presented here, each pertaining to a different class, i.e. alpha, delta and epsilon ganglion cells, containing a total of 34 crossings. The algorithms successfully got across all these overlaps. The method has also been found to exhibit robustness even for images with close parallel segments. The proposed method is robust and may be implemented in an efficient manner. The introduction of this approach should pave the way for more systematic application of contour-based shape analysis methods in neuronal morphology. (C) 2008 Elsevier B.V. All rights reserved.

Automatic camera control in virtual environments augmented using multiple sparse videos

Automated virtual camera control has been widely used in animation and interactive virtual environments. We have developed a multiple sparse camera based free view video system prototype that allows users to control the position and orientation of a virtual camera, enabling the observation of a real scene in three dimensions (3D) from any desired viewpoint. Automatic camera control can be activated to follow selected objects by the user. Our method combines a simple geometric model of the scene composed of planes (virtual environment), augmented with visual information from the cameras and pre-computed tracking information of moving targets to generate novel perspective corrected 3D views of the virtual camera and moving objects. To achieve real-time rendering performance, view-dependent textured mapped billboards are used to render the moving objects at their correct locations and foreground masks are used to remove the moving objects from the projected video streams. The current prototype runs on a PC with a common graphics card and can generate virtual 2D views from three cameras of resolution 768 x 576 with several moving objects at about 11 fps. (C)2011 Elsevier Ltd. All rights reserved.

Extension And Testing Of A 2D Hydrodynamic Model For Direct Rainfall Runoff Simulation

While the simulation of flood risks originating from the overtopping of river banks is well covered within continuously evaluated programs to improve flood protection measures, flash flooding is not. Flash floods are triggered by short, local thunderstorm cells with high precipitation intensities. Small catchments have short response times and flow paths and convective thunder cells may result in potential flooding of endangered settlements. Assessing local flooding and pathways of flood requires a detailed hydraulic simulation of the surface runoff. Hydrological models usually do not incorporate surface runoff at this detailedness but rather empirical equations are applied for runoff detention. In return 2D hydrodynamic models usually do not allow distributed rainfall as input nor are any types of soil/surface interaction implemented as in hydrological models. Considering several cases of local flash flooding during the last years the issue emerged for practical reasons but as well as research topics to closing the model gap between distributed rainfall and distributed runoff formation. Therefore, a 2D hydrodynamic model, depth-averaged flow equations using the finite volume discretization, was extended to accept direct rainfall enabling to simulate the associated runoff formation. The model itself is used as numerical engine, rainfall is introduced via the modification of waterlevels at fixed time intervals. The paper not only deals with the general application of the software, but intends to test the numerical stability and reliability of simulation results. The performed tests are made using different artificial as well as measured rainfall series as input. Key parameters of the simulation such as losses, roughness or time intervals for water level manipulations are tested regarding their impact on the stability.

Software Tools For Large Scale Interactive Hydrodynamic Modeling

Running hydrodynamic models interactively allows both visual exploration and change of model state during simulation. One of the main characteristics of an interactive model is that it should provide immediate feedback to the user, for example respond to changes in model state or view settings. For this reason, such features are usually only available for models with a relatively small number of computational cells, which are used mainly for demonstration and educational purposes. It would be useful if interactive modeling would also work for models typically used in consultancy projects involving large scale simulations. This results in a number of technical challenges related to the combination of the model itself and the visualisation tools (scalability, implementation of an appropriate API for control and access to the internal state). While model parallelisation is increasingly addressed by the environmental modeling community, little effort has been spent on developing a high-performance interactive environment. What can we learn from other high-end visualisation domains such as 3D animation, gaming, virtual globes (Autodesk 3ds Max, Second Life, Google Earth) that also focus on efficient interaction with 3D environments? In these domains high efficiency is usually achieved by the use of computer graphics algorithms such as surface simplification depending on current view, distance to objects, and efficient caching of the aggregated representation of object meshes. We investigate how these algorithms can be re-used in the context of interactive hydrodynamic modeling without significant changes to the model code and allowing model operation on both multi-core CPU personal computers and high-performance computer clusters.

Visualização interativa e manipulação de imagens 3D em tempo real usando métodos baseados na GPU

Este trabalho apresenta um conjunto de ferramentas que exploram as capacidades recentes das placas gráficas de computadores pessoais para prover a visualização e a interação com volumes de dados. O objetivo é oferecer ao usuário ferramentas que permitam a remoção interativa de partes não relevantes do volume. Assim, o usuário é capaz de selecionar um volume de interesse, o que pode tanto facilitar a compreensão da sua estrutura quanto a sua relação com os volumes circundantes. A técnica de visualização direta de volumes através do mapeamento de texturas é explorada para desenvolver estas ferramentas. O controle programável dos cálculos realizados pelo hardware gráfico para gerar a aparência de cada pixel na tela é usado para resolver a visibilidade de cada ponto do volume em tempo real. As ferramentas propostas permitem a modificação da visibilidade de cada ponto dentro do hardware gráfico, estendendo o benefício da visualização acelerada por hardware. Três ferramentas de interação são propostas: uma ferramenta de recorte planar que permite a seleção de um volume de interesse convexo; uma ferramenta do tipo “borracha”, para eliminar partes não relevantes da imagem; e uma ferramenta do tipo “escavadeira”, para remover camadas do volume Estas ferramentas exploram partes distintas do fluxo de visualização por texturas, onde é possível tomar a decisão sobre a visibilidade de cada ponto do volume. Cada ferramenta vem para resolver uma deficiência da ferramenta anterior. Com o recorte planar, o usuário aproxima grosseiramente o volume de interesse; com a borracha, ele refina o volume selecionado que, finalmente, é terminado com a escavadeira. Para aplicar as ferramentas propostas ao volume visualizado, são usadas técnicas de interação conhecidas, comuns nos sistemas de visualização 2D. Isto permite minimizar os esforços do usuário no treinamento do uso das ferramentas. Finalmente, são ilustradas as aplicações potenciais das ferramentas propostas para o estudo da anatomia do fígado humano. Nestas aplicações foi possível identificar algumas necessidades do usuário na visualização interativa de conjuntos de dados médicos. A partir destas observações, são propostas também novas ferramentas de interação, baseadas em modificações nas ferramentas propostas.

Facebook3d

INTRODUCTION With the advent of Web 2.0, social networking websites like Facebook, MySpace and LinkedIn have become hugely popular. According to (Nilsen, 2009), social networking websites have global1 figures of almost 250 millions unique users among the top five2, with the time people spend on those networks increasing 63% between 2007 and 2008. Facebook alone saw a massive growth of 566% in number of minutes in the same period of time. Furthermore their appeal is clear, they enable users to easily form persistent networks of friends with whom they can interact and share content. Users then use those networks to keep in touch with their current friends and to reconnect with old friends. However, online social network services have rapidly evolved into highly complex systems which contain a large amount of personally salient information derived from large networks of friends. Since that information varies from simple links to music, photos and videos, users not only have to deal with the huge amount of data generated by them and their friends but also with the fact that it‟s composed of many different media forms. Users are presented with increasing challenges, especially as the number of friends on Facebook rises. An example of a problem is when a user performs a simple task like finding a specific friend in a group of 100 or more friends. In that case he would most likely have to go through several pages and make several clicks till he finds the one he is looking for. Another example is a user with more than 100 friends in which his friends make a status update or another action per day, resulting in 10 updates per hour to keep up. That is plausible, especially since the change in direction of Facebook to rival with Twitter, by encouraging users to update their status as they do on Twitter. As a result, to better present the web of information connected to a user the use of better visualizations is essential. The visualizations used nowadays on social networking sites haven‟t gone through major changes during their lifetimes. They have added more functionality and gave more tools to their users, but still the core of their visualization hasn‟t changed. The information is still presented in a flat way in lists/groups of text and images which can‟t show the extra connections pieces of information. Those extra connections can give new meaning and insights to the user, allowing him to more easily see if that content is important to him and the information related to it. However showing extra connections of information but still allowing the user to easily navigate through it and get the needed information with a quick glance is difficult. The use of color coding, clusters and shapes becomes then essential to attain that objective. But taking into consideration the advances in computer hardware in the last decade and the software platforms available today, there is the opportunity to take advantage of 3D. That opportunity comes in because we are at a phase were the hardware and the software available is ready for the use of 3D in the web. With the use of the extra dimension brought by 3D, visualizations can be constructed to show the content and its related information to the user at the same screen and in a clear way. Also it would allow a great deal of interactivity. Another opportunity to create better information‟s visualization presents itself in the form of the open APIs, specifically the ones made available by the social networking sites. Those APIs allow any developers to create their own applications or sites taking advantage of the huge amount of information there is on those networks. Specifically to this case, they open the door for the creation of new social network visualizations. Nevertheless, the third dimension is by itself not enough to create a better interface for a social networking website, there are some challenges to overcome. One of those challenges is to make the user understand what the system is doing during the interaction with the user. Even though that is important in 2D visualizations, it becomes essential in 3D due to the extra dimension. To overcome that challenge it‟s necessary the use of the principles of animations defined by the artists at Walt Disney Studios (Johnston, et al., 1995). By applying those principles in the development of the interface, the actions of the system in response to the user inputs became clear and understandable. Furthermore, a user study needs to be performed so the users‟ main goals and motivations, while navigating the social network, are revealed. Their goals and motivations are important in the construction of an interface that reflects the user expectations for the interface, but also helps in the development of appropriate metaphors. Those metaphors have an important role in the interface, because if correctly chosen they help the user understand the elements of the interface instead of making him memorize it. The last challenge is the use of 3D visualization on the web, since there have been several attempts to bring 3D into it, mainly with the various versions of VRML which were destined to failure due to the hardware limitations at the time. However, in the last couple of years there has been a movement to make the necessary tools to finally allow developers to use 3D in a useful way, using X3D or OpenGL but especially flash. This thesis argues that there is a need for a better social network visualization that shows all the dimensions of the information connected to the user and that allows him to move through it. But there are several characteristics the new visualization has to possess in order for it to present a real gain in usability to Facebook‟s users. The first quality is to have the friends at the core of its design, and the second to make use of the metaphor of circles of friends to separate users in groups taking into consideration the order of friendship. To achieve that several methods have to be used, from the use of 3D to get an extra dimension for presenting relevant information, to the use of direct manipulation to make the interface comprehensible, predictable and controllable. Moreover animation has to be use to make all the action on the screen perceptible to the user. Additionally, with the opportunity given by the 3D enabled hardware, the flash platform, through the use of the flash engine Papervision3D and the Facebook platform, all is in place to make the visualization possible. But even though it‟s all in place, there are challenges to overcome like making the system actions in 3D understandable to the user and creating correct metaphors that would allow the user to understand the information and options available to him. This thesis document is divided in six chapters, with Chapter 2 reviewing the literature relevant to the work described in this thesis. In Chapter 3 the design stage that resulted in the application presented in this thesis is described. In Chapter 4, the development stage, describing the architecture and the components that compose the application. In Chapter 5 the usability test process is explained and the results obtained through it are presented and analyzed. To finish, Chapter 6 presents the conclusions that were arrived in this thesis.

3D reconstruction through photographs

Humans can perceive three dimension, our world is three dimensional and it is becoming increasingly digital too. We have the need to capture and preserve our existence in digital means perhaps due to our own mortality. We have also the need to reproduce objects or create small identical objects to prototype, test or study them. Some objects have been lost through time and are only accessible through old photographs. With robust model generation from photographs we can use one of the biggest human data sets and reproduce real world objects digitally and physically with printers. What is the current state of development in three dimensional reconstruction through photographs both in the commercial world and in the open source world? And what tools are available for a developer to build his own reconstruction software? To answer these questions several pieces of software were tested, from full commercial software packages to open source small projects, including libraries aimed at computer vision. To bring to the real world the 3D models a 3D printer was built, tested and analyzed, its problems and weaknesses evaluated. Lastly using a computer vision library a small software with limited capabilities was developed.

Aquisição e construção de modelos estáticos análogos a reservatórios petrolíferos com tecnologia lidar e georadar

The present work develops a methodology to establish a 3D digital static models petroleum reservoir analogue using LIDAR and GEORADAR technologies. Therefore, this work introduce The methodolgy as a new paradigm in the outcrop study, to purpose a consistent way to integrate plani-altimetric data, geophysics data, and remote sensing products, allowing 2D interpretation validation in contrast with 3D, complexes depositional geometry visualization, including in environmental immersive virtual reality. For that reason, it exposes the relevant questions of the theory of two technologies, and developed a case study using TerraSIRch SIR System-3000 made for Geophysical Survey Systems, and HDS3000 Leica Geosystems, using the two technologies, integrating them GOCAD software. The studied outcrop is plain to the view, and it s located at southeast Bacia do Parnaíba, in the Parque Nacional da Serra das Confusões. The methodology embraces every steps of the building process shows a 3D digital static models petroleum reservoir analogue, provide depositional geometry data, in several scales for Simulation petroleum reservoir