Arquitectura de Control para la Conducción Autónoma de Vehículos en Entornos Urbanos y Autovías

Hoy en día, el desarrollo tecnológico en el campo de los sistemas inteligentes de transporte (ITS por sus siglas en inglés) ha permitido dotar a los vehículos con diversos sistemas de ayuda a la conducción (ADAS, del inglés advanced driver assistance system), mejorando la experiencia y seguridad de los pasajeros, en especial del conductor. La mayor parte de estos sistemas están pensados para advertir al conductor sobre ciertas situaciones de riesgo, como la salida involuntaria del carril o la proximidad de obstáculos en el camino. No obstante, también podemos encontrar sistemas que van un paso más allá y son capaces de cooperar con el conductor en el control del vehículo o incluso relegarlos de algunas tareas tediosas. Es en este último grupo donde se encuentran los sistemas de control electrónico de estabilidad (ESP - Electronic Stability Program), el antibloqueo de frenos (ABS - Anti-lock Braking System), el control de crucero (CC - Cruise Control) y los más recientes sistemas de aparcamiento asistido. Continuando con esta línea de desarrollo, el paso siguiente consiste en la supresión del conductor humano, desarrollando sistemas que sean capaces de conducir un vehículo de forma autónoma y con un rendimiento superior al del conductor. En este trabajo se presenta, en primer lugar, una arquitectura de control para la automatización de vehículos. Esta se compone de distintos componentes de hardware y software, agrupados de acuerdo a su función principal. El diseño de la arquitectura parte del trabajo previo desarrollado por el Programa AUTOPIA, aunque introduce notables aportaciones en cuanto a la eficiencia, robustez y escalabilidad del sistema. Ahondando un poco más en detalle, debemos resaltar el desarrollo de un algoritmo de localización basado en enjambres de partículas. Este está planteado como un método de filtrado y fusión de la información obtenida a partir de los distintos sensores embarcados en el vehículo, entre los que encontramos un receptor GPS (Global Positioning System), unidades de medición inercial (IMU – Inertial Measurement Unit) e información tomada directamente de los sensores embarcados por el fabricante, como la velocidad de las ruedas y posición del volante. Gracias a este método se ha conseguido resolver el problema de la localización, indispensable para el desarrollo de sistemas de conducción autónoma. Continuando con el trabajo de investigación, se ha estudiado la viabilidad de la aplicación de técnicas de aprendizaje y adaptación al diseño de controladores para el vehículo. Como punto de partida se emplea el método de Q-learning para la generación de un controlador borroso lateral sin ningún tipo de conocimiento previo. Posteriormente se presenta un método de ajuste on-line para la adaptación del control longitudinal ante perturbaciones impredecibles del entorno, como lo son los cambios en la inclinación del camino, fricción de las ruedas o peso de los ocupantes. Para finalizar, se presentan los resultados obtenidos durante un experimento de conducción autónoma en carreteras reales, el cual se llevó a cabo en el mes de Junio de 2012 desde la población de San Lorenzo de El Escorial hasta las instalaciones del Centro de Automática y Robótica (CAR) en Arganda del Rey. El principal objetivo tras esta demostración fue validar el funcionamiento, robustez y capacidad de la arquitectura propuesta para afrontar el problema de la conducción autónoma, bajo condiciones mucho más reales a las que se pueden alcanzar en las instalaciones de prueba. ABSTRACT Nowadays, the technological advances in the Intelligent Transportation Systems (ITS) field have led the development of several driving assistance systems (ADAS). These solutions are designed to improve the experience and security of all the passengers, especially the driver. For most of these systems, the main goal is to warn drivers about unexpected circumstances leading to risk situations such as involuntary lane departure or proximity to other vehicles. However, other ADAS go a step further, being able to cooperate with the driver in the control of the vehicle, or even overriding it on some tasks. Examples of this kind of systems are the anti-lock braking system (ABS), cruise control (CC) and the recently commercialised assisted parking systems. Within this research line, the next step is the development of systems able to replace the human drivers, improving the control and therefore, the safety and reliability of the vehicles. First of all, this dissertation presents a control architecture design for autonomous driving. It is made up of several hardware and software components, grouped according to their main function. The design of this architecture is based on the previous works carried out by the AUTOPIA Program, although notable improvements have been made regarding the efficiency, robustness and scalability of the system. It is also remarkable the work made on the development of a location algorithm for vehicles. The proposal is based on the emulation of the behaviour of biological swarms and its performance is similar to the well-known particle filters. The developed method combines information obtained from different sensors, including GPS, inertial measurement unit (IMU), and data from the original vehicle’s sensors on-board. Through this filtering algorithm the localization problem is properly managed, which is critical for the development of autonomous driving systems. The work deals also with the fuzzy control tuning system, a very time consuming task when done manually. An analysis of learning and adaptation techniques for the development of different controllers has been made. First, the Q-learning –a reinforcement learning method– has been applied to the generation of a lateral fuzzy controller from scratch. Subsequently, the development of an adaptation method for longitudinal control is presented. With this proposal, a final cruise control controller is able to deal with unpredictable environment disturbances, such as road slope, wheel’s friction or even occupants’ weight. As a testbed for the system, an autonomous driving experiment on real roads is presented. This experiment was carried out on June 2012, driving from San Lorenzo de El Escorial up to the Center for Automation and Robotics (CAR) facilities in Arganda del Rey. The main goal of the demonstration was validating the performance, robustness and viability of the proposed architecture to deal with the problem of autonomous driving under more demanding conditions than those achieved on closed test tracks.

Resilience in Cloud Computing for Critical Systems. Resilience, Dependability, Reliability in the use of Cloud Computing in Critical Systems in Public Organizations.

La informática se está convirtiendo en la quinta utilidad (gas, agua, luz, teléfono) en parte debido al impacto de Cloud Computing en las mayorías de las organizaciones. Este uso de informática es usada por cada vez más tipos de sistemas, incluidos Sistemas Críticos. Esto tiene un impacto en la complejidad internad y la fiabilidad de los sistemas de la organización y los que se ofrecen a los clientes. Este trabajo investiga el uso de Cloud Computing por sistemas críticos, centrándose en las dependencias y especialmente en la fiabilidad de estos sistemas. Se han presentado algunos ejemplos de su uso, y aunque su utilización en sistemas críticos no está extendido, se presenta cual puede llegar a ser su impacto. El objetivo de este trabajo es primero definir un modelo que pueda representar de una forma cuantitativa las interdependencias en fiabilidad y interdependencia para las organizaciones que utilicen estos sistemas, y aplicar este modelo en un sistema crítico del campo de sanidad y mostrar sus resultados. Los conceptos de “macro-dependability” y “micro-dependability” son introducidos en el modelo para la definición de interdependencia y para analizar la fiabilidad de sistemas que dependen de otros sistemas. ABSTRACT With the increasing utilization of Internet services and cloud computing by most organizations (both private and public), it is clear that computing is becoming the 5th utility (along with water, electricity, telephony and gas). These technologies are used for almost all types of systems, and the number is increasing, including Critical Infrastructure systems. Even if Critical Infrastructure systems appear not to rely directly on cloud services, there may be hidden inter-dependencies. This is true even for private cloud computing, which seems more secure and reliable. The critical systems can began in some cases with a clear and simple design, but evolved as described by Egan to "rafted" networks. Because they are usually controlled by one or few organizations, even when they are complex systems, their dependencies can be understood. The organization oversees and manages changes. These CI systems have been affected by the introduction of new ICT models like global communications, PCs and the Internet. Even virtualization took more time to be adopted by Critical systems, due to their strategic nature, but once that these technologies have been proven in other areas, at the end they are adopted as well, for different reasons such as costs. A new technology model is happening now based on some previous technologies (virtualization, distributing and utility computing, web and software services) that are offered in new ways and is called cloud computing. The organizations are migrating more services to the cloud; this will have impact in their internal complexity and in the reliability of the systems they are offering to the organization itself and their clients. Not always this added complexity and associated risks to their reliability are seen. As well, when two or more CI systems are interacting, the risks of one can affect the rest, sharing the risks. This work investigates the use of cloud computing by critical systems, and is focused in the dependencies and reliability of these systems. Some examples are presented together with the associated risks. A framework is introduced for analysing the dependability and resilience of a system that relies on cloud services and how to improve them. As part of the framework, the concepts of micro and macro dependability are introduced to explain the internal and external dependability on services supplied by an external cloud. A pharmacovigilance model system has been used for framework validation.

Sight distance for traffic safety analysis using GIS

Sight distance is of major importance for road safety either when designing new roads or analysing the alignment of existing roads. It is essential that available sight distance in roads is long enough for emergency stops or overtaking manoeuvres. Also, it is vital for engineers/researchers that the tools used for that analysis are both powerful and intuitive. Based on ArcGIS, the application to be presented not only performs an exhaustive sight distance calculation, but allows an accurate analysis of 3D alignment, using all new tools, from a Digital Elevation Model and vehicle trajectory. The software has been successfully utilised to analyse several two-lane rural roads in Spain. In addition, the software produces thematic maps representing sight distance in which supplementary information about crashes, traffic flow, speed or design consistency could be included, allowing traffic safety studies.

Assessment of CTF boiling transition and critical heat flux modeling capabilities using the OECD/NRC BFBT and PSBT benchmark databases

Over the last few years, the Pennsylvania State University (PSU) under the sponsorship of the US Nuclear Regulatory Commission (NRC) has prepared, organized, conducted, and summarized two international benchmarks based on the NUPEC data—the OECD/NRC Full-Size Fine-Mesh Bundle Test (BFBT) Benchmark and the OECD/NRC PWR Sub-Channel and Bundle Test (PSBT) Benchmark. The benchmarks’ activities have been conducted in cooperation with the Nuclear Energy Agency/Organization for Economic Co-operation and Development (NEA/OECD) and the Japan Nuclear Energy Safety (JNES) Organization. This paper presents an application of the joint Penn State University/Technical University of Madrid (UPM) version of the well-known sub-channel code COBRA-TF (Coolant Boiling in Rod Array-Two Fluid), namely, CTF, to the steady state critical power and departure from nucleate boiling (DNB) exercises of the OECD/NRC BFBT and PSBT benchmarks. The goal is two-fold: firstly, to assess these models and to examine their strengths and weaknesses; and secondly, to identify the areas for improvement.

Software tool for simulation of aircraft trajectories

New concepts in air navigation have been introduced recently. Among others, are the concepts of trajectory optimization, 4D trajectories, RBT (Reference Business Trajectory), TBO (trajectory based operations), CDA (Continuous Descent Approach) and ACDA (Advanced CDA), conflict resolution, arrival time (AMAN), introduction of new aircraft (UAVs, UASs) in air space, etc. Although some of these concepts are new, the future Air Traffic Management will maintain the four ATM key performance areas such as Safety, Capacity, Efficiency, and Environmental impact. So much, the performance of the ATM system is directly related to the accuracy with which the future evolution of the traffic can be predicted. In this sense, future air traffic management will require a variety of support tools to provide suitable help to users and engineers involved in the air space management. Most of these tools are based on an appropriate trajectory prediction module as main component. Therefore, the purposes of these tools are related with testing and evaluation of any air navigation concept before they become fully operative. The aim of this paper is to provide an overview to the design of a software tool useful to estimate aircraft trajectories adapted to air navigation concepts. Other usage of the tool, like controller design, vertical navigation assessment, procedures validation and hardware and software in the loop are available in the software tool. The paper will show the process followed to design the tool, the software modules needed to perform accurately and the process followed to validate the output data.

Languages for safety-certification related propertis

The Safety Certification of Software-Intensive Systems with Reusable Components project, in short SafeCer (www.safecer.eu),is targeting increased efficiency and reduced time-to-market by composable safety certification of safety- relevant embedded systems. The industrial domains targeted are within automotive and construction equipment, avionics, and rail. Some of the companies involved are: Volvo Tech- nology, Thales, TTTech, and Intecs among others. SafeCer includes more than 30 partners in six different countries and has a budget of e25.7 millions. A primary objective is to provide support for system safety arguments based on arguments and properties of system components as well as to provide support for generation of corresponding evidence in a similar compositional way. By providing support for efficient reuse of certification and stronger links between certification and development, compo- nent reuse will be facilitated, and by providing support for reuse across domains the amount of components available for reuse will increase dramatically. The resulting efficiency and reduced time to market will, together with increased quality and reduced risk, increase competitiveness and pave the way for a cross-domain market for software components qualified for certification.

Caracterización de Sistemas intensivos en Software desde un punto de vista de innovación=Characterizing Software-intensive Systems from the innovation point of view

La innovación en Sistemas Intesivos en Software está alcanzando relevancia por múltiples razones: el software está presente en sectores como automóvil, teléfonos móviles o salud. Las empresas necesitan conocer aquellos factores que afectan a la innovación para incrementar las probabilidades de éxito en el desarrollo de sus productos y, la evaluación de productos sofware es un mecanismo potente para capturar este conocimiento. En consecuencia, las empresas necesitan evaluar sus productos desde la perpectiva de innovación para reducir la distancia entre los productos desarrollados y el mercado. Esto es incluso más relevante en el caso de los productos intensivos en software, donde el tiempo real, la oportunidad, complejidad, interoperabilidad, capacidad de respuesta y compartción de recursos son características críticas de los nuevos sistemas. La evaluación de la innovación de productos ya ha sido estudiada y se han definido algunos esquemas de evaluación pero no son específicos para Sistemas intensivos en Sofwtare; además, no se ha alcanzado consenso en los factores ni el procedimiento de evaluación. Por lo tanto, tiene sentido trabajar en la definición de un marco de evaluación de innovación enfocado a Sistemas intesivos en Software. Esta tesis identifica los elementos necesarios para construir in marco para la evaluación de de Sistemas intensivos en Software desde el punto de vista de la innovación. Se han identificado dos componentes como partes del marco de evaluación: un modelo de referencia y una herramienta adaptativa y personalizable para la realización de la evaluación y posicionamiento de la innovación. El modelo de referencia está compuesto por cuatro elementos principales que caracterizan la evaluación de innovación de productos: los conceptos, modelos de innovación, cuestionarios de evaluación y la evaluación de productos. El modelo de referencia aporta las bases para definir instancias de los modelos de evaluación de innovación de productos que pueden se evaluados y posicionados en la herramienta a través de cuestionarios y que de forma automatizada aporta los resultados de la evaluación y el posicionamiento respecto a la innovación de producto. El modelo de referencia ha sido rigurosamente construido aplicando modelado conceptual e integración de vistas junto con la aplicación de métodos cualitativos de investigación. La herramienta ha sido utilizada para evaluar productos como Skype a través de la instanciación del modelo de referencia. ABSTRACT Innovation in Software intensive Systems is becoming relevant for several reasons: software is present embedded in many sectors like automotive, robotics, mobile phones or heath care. Firms need to have knowledge about factors affecting the innovation to increase the probability of success in their product development and the assessment of innovation in software products is a powerful mechanism to capture this knowledge. Therefore, companies need to assess products from an innovation perspective to reduce the gap between their developed products and the market. This is even more relevant in the case of SiSs, where real time, timeliness, complexity, interoperability, reactivity, and resource sharing are critical features of a new system. Many authors have analysed product innovation assessment and some schemas have been developed but they are not specific to SiSs; in addition, there is no consensus about the factors or the procedures for performing an assessment. Therefore, it has sense to work in the definition of a customized software product innovation evaluation framework. This thesis identifies the elements needed to build a framework to assess software products from the innovation perspective. Two components have been identified as part of the framework to assess Software intensive Systems from the innovation perspective: a reference-model and an adaptive and customizable tool to perform the assessment and to position product innovation. The reference-model is composed by four main elements characterizing product innovation assessment: concepts, innovation models, assessment questionnaires and product assessment. The reference model provides the umbrella to define instances of product innovation assessment models that can be assessed and positioned through questionnaires in the proposed tool that also provides automation in the assessment and positioning of innovation. The reference-model has been rigorously built by applying conceptual modelling and view integration integrated with qualitative research methods. The tool has been used to assess products like Skype through models instantiated from the reference-model.

An Analysis Of The Recommended Knowledge For The Software Project Management Discipline

According to the PMBOK (Project Management Body of Knowledge), project management is “the application of knowledge, skills, tools, and techniques to project activities to meet the project requirements” [1]. Project Management has proven to be one of the most important disciplines at the moment of determining the success of any project [2][3][4]. Given that many of the activities covered by this discipline can be said that are “horizontal” for any kind of domain, the importance of acknowledge the concepts and practices becomes even more obvious. The specific case of the projects that fall in the domain of Software Engineering are not the exception about the great influence of Project Management for their success. The critical role that this discipline plays in the industry has come to numbers. A report by McKinsey & Co [4] shows that the establishment of programs for the teaching of critical skills of project management can improve the performance of the project in time and costs. As an example of the above, the reports exposes: “One defense organization used these programs to train several waves of project managers and leaders who together administered a portfolio of more than 1,000 capital projects ranging in Project management size from $100,000 to $500 million. Managers who successfully completed the training were able to cut costs on most projects by between 20 and 35 percent. Over time, the organization expects savings of about 15 percent of its entire baseline spending”. In a white paper by the PMI (Project Management Institute) about the value of project management [5], it is stated that: “Leading organizations across sectors and geographic borders have been steadily embracing project management as a way to control spending and improve project results”. According to the research made by the PMI for the paper, after the economical crisis “Executives discovered that adhering to project management methods and strategies reduced risks, cut costs and improved success rates—all vital to surviving the economic crisis”. In every elite company, a proper execution of the project management discipline has become a must. Several members of the software industry have putted effort into achieving ways of assuring high quality results from projects; many standards, best practices, methodologies and other resources have been produced by experts from different fields of expertise. In the industry and the academic community, there is a continuous research on how to teach better software engineering together with project management [4][6]. For the general practices of Project Management the PMI produced a guide of the required knowledge that any project manager should have in their toolbox to lead any kind of project, this guide is called the PMBOK. On the side of best practices 10 and required knowledge for the Software Engineering discipline, the IEEE (Institute of Electrical and Electronics Engineers) developed the SWEBOK (Software Engineering Body of Knowledge) in collaboration with software industry experts and academic researchers, introducing into the guide many of the needed knowledge for a 5-year expertise software engineer [7]. The SWEBOK also covers management from the perspective of a software project. This thesis is developed to provide guidance to practitioners and members of the academic community about project management applied to software engineering. The way used in this thesis to get useful information for practitioners is to take an industry-approved guide for software engineering professionals such as the SWEBOK, and compare the content to what is found in the PMBOK. After comparing the contents of the SWEBOK and the PMBOK, what is found missing in the SWEBOK is used to give recommendations on how to enrich project management skills for a software engineering professional. Recommendations for members of the academic community on the other hand, are given taking into account the GSwE2009 (Graduated Software Engineering 2009) standard [8]. GSwE2009 is often used as a main reference for software engineering master programs [9]. The standard is mostly based on the content of the SWEBOK, plus some contents that are considered to reinforce the education of software engineering. Given the similarities between the SWEBOK and the GSwE2009, the results of comparing SWEBOK and PMBOK are also considered valid to enrich what the GSwE2009 proposes. So in the end the recommendations for practitioners end up being also useful for the academic community and their strategies to teach project management in the context of software engineering.

Critical radius for hot-jet ignition of hydrogen-air mixtures

This study addresses deflagration initiation of lean and stoichiometric hydrogen–air mixtures by the sudden discharge of a hot jet of their adiabatic combustion products. The objective is to compute the minimum jet radius required for ignition, a relevant quantity of interest for safety and technological applications. For sufficiently small discharge velocities, the numerical solution of the problem requires integration of the axisymmetric Navier–Stokes equations for chemically reacting ideal-gas mixtures, supplemented by standard descriptions of the molecular transport terms and a suitably reduced chemical-kinetic mechanism for the chemistry description. The computations provide the variation of the critical radius for hot-jet ignition with both the jet velocity and the equivalence ratio of the mixture, giving values that vary between a few tens microns to a few hundred microns in the range of conditions explored. For a given equivalence ratio, the critical radius is found to increase with increasing injection velocities, although the increase is only moderately large. On the other hand, for a given injection velocity, the smallest critical radius is found at stoichiometric conditions.

Guía para el desarrollo de software seguro

El presente Trabajo de Fin de Grado (TFG) es el resultado de la necesidad de la seguridad en la construcción del software ya que es uno de los mayores problemas con que se enfrenta hoy la industria debido a la baja calidad de la misma tanto en software de Sistema Operativo, como empotrado y de aplicaciones. La creciente dependencia de software para que se hagan trabajos críticos significa que el valor del software ya no reside únicamente en su capacidad para mejorar o mantener la productividad y la eficiencia. En lugar de ello, su valor también se deriva de su capacidad para continuar operando de forma fiable incluso de cara de los eventos que la amenazan. La capacidad de confiar en que el software seguirá siendo fiable en cualquier circunstancia, con un nivel de confianza justificada, es el objetivo de la seguridad del software. Seguridad del software es importante porque muchas funciones críticas son completamente dependientes del software. Esto hace que el software sea un objetivo de valor muy alto para los atacantes, cuyos motivos pueden ser maliciosos, penales, contenciosos, competitivos, o de naturaleza terrorista. Existen fuentes muy importantes de mejores prácticas, métodos y herramientas para mejorar desde los requisitos en sus aspectos no funcionales, ciclo de vida del software seguro, pasando por la dirección de proyectos hasta su desarrollo, pruebas y despliegue que debe ser tenido en cuenta por los desarrolladores. Este trabajo se centra fundamentalmente en elaborar una guía de mejores prácticas con la información existente CERT, CMMI, Mitre, Cigital, HP, y otras fuentes. También se plantea desarrollar un caso práctico sobre una aplicación dinámica o estática con el fin de explotar sus vulnerabilidades.---ABSTRACT---This Final Project Grade (TFG) is the result of the need for security in software construction as it is one of the biggest problems facing the industry today due to the low quality of it both OS software, embedded software and applications software. The increasing reliance on software for critical jobs means that the value of the software no longer resides solely in its capacity to improve or maintain productivity and efficiency. Instead, its value also stems from its ability to continue to operate reliably even when facing events that threaten it. The ability to trust that the software will remain reliable in all circumstances, with justified confidence level is the goal of software security. The security in software is important because many critical functions are completely dependent of the software. This makes the software to be a very high value target for attackers, whose motives may be by a malicious, by crime, for litigating, by competitiveness or by a terrorist nature. There are very important sources of best practices, methods and tools to improve the requirements in their non-functional aspects, the software life cycle with security in mind, from project management to its phases (development, testing and deployment) which should be taken into account by the developers. This paper focuses primarily on developing a best practice guide with existing information from CERT, CMMI, Mitre, Cigital, HP, and other organizations. It also aims to develop a case study on a dynamic or static application in order to exploit their vulnerabilities.

Determination of critical slip surfaces using mutative scale chaos optimization

Limit equilibrium is a common method used to analyze the stability of a slope, and minimization of the factor of safety or identification of critical slip surfaces is a classical geotechnical problem in the context of limit equilibrium methods for slope stability analyses. A mutative scale chaos optimization algorithm is employed in this study to locate the noncircular critical slip surface with Spencer’s method being employed to compute the factor of safety. Four examples from the literature—one homogeneous slope and three layered slopes—are employed to identify the efficiency and accuracy of this approach. Results indicate that the algorithm is flexible and that although it does not generally provide the minimum FS, it provides results that are close to the minimum, an improvement over other solutions proposed in the literature and with small relative errors with respect to other minimum factor of safety (FS) values reported in the literature.

Mixed-criticality design of a satellite software system

The continuous increment of processors computational power and the requirements on additional functionality and services are motivating a change in the way embedded systems are built. Components with different criticality level are allocated in the same processor, which give rise to mixed-criticality systems. The use of partitioned systems is a way of preventing undesirable interferences between components with different criticality level. An hypervisor provides these partitions or virtual machines, ensuring spatial, temporal and fault isolation between them. The purpose of this paper is to illustrate the development of a mixed-critical system. The attitude control subsystem is used for showing the different steps, which are supported by a toolset developed in the context of the MultiPARTES research project.

Are team personality and climate related to satisfaction and software quality? Aggregating results from a twice replicated experiment

Research into software engineering teams focuses on human and social team factors. Social psychology deals with the study of team formation and has found that personality factors and group processes such as team climate are related to team effectiveness. However, there are only a handful of empirical studies dealing with personality and team climate and their relationship to software development team effectiveness. Objective We present aggregate results of a twice replicated quasi-experiment that evaluates the relationships between personality, team climate, product quality and satisfaction in software development teams. Method Our experimental study measures the personalities of team members based on the Big Five personality traits (openness, conscientiousness, extraversion, agreeableness, neuroticism) and team climate factors (participative safety, support for innovation, team vision and task orientation) preferences and perceptions. We aggregate the results of the three studies through a meta-analysis of correlations. The study was conducted with students. Results The aggregation of results from the baseline experiment and two replications corroborates the following findings. There is a positive relationship between all four climate factors and satisfaction in software development teams. Teams whose members score highest for the agreeableness personality factor have the highest satisfaction levels. The results unveil a significant positive correlation between the extraversion personality factor and software product quality. High participative safety and task orientation climate perceptions are significantly related to quality. Conclusions First, more efficient software development teams can be formed heeding personality factors like agreeableness and extraversion. Second, the team climate generated in software development teams should be monitored for team member satisfaction. Finally, aspects like people feeling safe giving their opinions or encouraging team members to work hard at their job can have an impact on software quality. Software project managers can take advantage of these factors to promote developer satisfaction and improve the resulting product.

Engineering Computational Emotion - A Reference Model for Emotion in Artificial Systems

Emotion is generally argued to be an influence on the behavior of life systems, largely concerning flexibility and adaptivity. The way in which life systems acts in response to a particular situations of the environment, has revealed the decisive and crucial importance of this feature in the success of behaviors. And this source of inspiration has influenced the way of thinking artificial systems. During the last decades, artificial systems have undergone such an evolution that each day more are integrated in our daily life. They have become greater in complexity, and the subsequent effects are related to an increased demand of systems that ensure resilience, robustness, availability, security or safety among others. All of them questions that raise quite a fundamental challenges in control design. This thesis has been developed under the framework of the Autonomous System project, a.k.a the ASys-Project. Short-term objectives of immediate application are focused on to design improved systems, and the approaching of intelligence in control strategies. Besides this, long-term objectives underlying ASys-Project concentrate on high order capabilities such as cognition, awareness and autonomy. This thesis is placed within the general fields of Engineery and Emotion science, and provides a theoretical foundation for engineering and designing computational emotion for artificial systems. The starting question that has grounded this thesis aims the problem of emotion--based autonomy. And how to feedback systems with valuable meaning has conformed the general objective. Both the starting question and the general objective, have underlaid the study of emotion, the influence on systems behavior, the key foundations that justify this feature in life systems, how emotion is integrated within the normal operation, and how this entire problem of emotion can be explained in artificial systems. By assuming essential differences concerning structure, purpose and operation between life and artificial systems, the essential motivation has been the exploration of what emotion solves in nature to afterwards analyze analogies for man--made systems. This work provides a reference model in which a collection of entities, relationships, models, functions and informational artifacts, are all interacting to provide the system with non-explicit knowledge under the form of emotion-like relevances. This solution aims to provide a reference model under which to design solutions for emotional operation, but related to the real needs of artificial systems. The proposal consists of a multi-purpose architecture that implement two broad modules in order to attend: (a) the range of processes related to the environment affectation, and (b) the range or processes related to the emotion perception-like and the higher levels of reasoning. This has required an intense and critical analysis beyond the state of the art around the most relevant theories of emotion and technical systems, in order to obtain the required support for those foundations that sustain each model. The problem has been interpreted and is described on the basis of AGSys, an agent assumed with the minimum rationality as to provide the capability to perform emotional assessment. AGSys is a conceptualization of a Model-based Cognitive agent that embodies an inner agent ESys, the responsible of performing the emotional operation inside of AGSys. The solution consists of multiple computational modules working federated, and aimed at conforming a mutual feedback loop between AGSys and ESys. Throughout this solution, the environment and the effects that might influence over the system are described as different problems. While AGSys operates as a common system within the external environment, ESys is designed to operate within a conceptualized inner environment. And this inner environment is built on the basis of those relevances that might occur inside of AGSys in the interaction with the external environment. This allows for a high-quality separate reasoning concerning mission goals defined in AGSys, and emotional goals defined in ESys. This way, it is provided a possible path for high-level reasoning under the influence of goals congruence. High-level reasoning model uses knowledge about emotional goals stability, letting this way new directions in which mission goals might be assessed under the situational state of this stability. This high-level reasoning is grounded by the work of MEP, a model of emotion perception that is thought as an analogy of a well-known theory in emotion science. The work of this model is described under the operation of a recursive-like process labeled as R-Loop, together with a system of emotional goals that are assumed as individual agents. This way, AGSys integrates knowledge that concerns the relation between a perceived object, and the effect which this perception induces on the situational state of the emotional goals. This knowledge enables a high-order system of information that provides the sustain for a high-level reasoning. The extent to which this reasoning might be approached is just delineated and assumed as future work. This thesis has been studied beyond a long range of fields of knowledge. This knowledge can be structured into two main objectives: (a) the fields of psychology, cognitive science, neurology and biological sciences in order to obtain understanding concerning the problem of the emotional phenomena, and (b) a large amount of computer science branches such as Autonomic Computing (AC), Self-adaptive software, Self-X systems, Model Integrated Computing (MIC) or the paradigm of models@runtime among others, in order to obtain knowledge about tools for designing each part of the solution. The final approach has been mainly performed on the basis of the entire acquired knowledge, and described under the fields of Artificial Intelligence, Model-Based Systems (MBS), and additional mathematical formalizations to provide punctual understanding in those cases that it has been required. This approach describes a reference model to feedback systems with valuable meaning, allowing for reasoning with regard to (a) the relationship between the environment and the relevance of the effects on the system, and (b) dynamical evaluations concerning the inner situational state of the system as a result of those effects. And this reasoning provides a framework of distinguishable states of AGSys derived from its own circumstances, that can be assumed as artificial emotion.

Evolución del conocimiento del hormigón estructural hasta 1973

Esta tesis analiza los criterios con que fueron proyectadas y construidas las estructuras de hormigón hasta 1973, fecha coincidente con la Instrucción EH-73, que en contenido, formato y planteamiento, consagró la utilización de los criterios modernamente utilizados hasta ahora. Es heredera, además, de las CEB 1970. Esos años marcan el cambio de planteamiento desde la Teoría Clásica hacia los Estados Límite. Los objetivos perseguidos son, sintéticamente: 1) Cubrir un vacío patente en el estudio de la evolución del conocimiento. Hay tratados sobre la historia del hormigón que cubren de manera muy completa el relato de personajes y realizaciones, pero no, al menos de manera suficiente, la evolución del conocimiento. 2) Servir de ayuda a los técnicos de hoy para entender configuraciones estructurales, geometrías, disposiciones de armado, formatos de seguridad, etc, utilizados en el pasado, lo que servirá para la redacción más fundada de dictámenes preliminares sobre estructuras existentes. 3) Ser referencia para la realización de estudios de valoración de la capacidad resistente de construcciones existentes, constituyendo la base de un documento pre-normativo orientado en esa dirección. En efecto, esta tesis pretende ser una ayuda para los ingenieros de hoy que se enfrentan a la necesidad de conservar y reparar estructuras de hormigón armado que forman parte del patrimonio heredado. La gran mayoría de las estructuras, fueron construidas hace más de 40 años, por lo que es preciso conocer los criterios que marcaron su diseño, su cálculo y su construcción. Pretende determinar cuáles eran los límites de agotamiento y por tanto de seguridad, de estructuras dimensionadas con criterios de antaño, analizadas por la metodología de cálculo actual. De este modo, se podrá determinar el resguardo existente “real” de las estructuras dimensionadas y calculadas con criterios “distintos” a los actuales. Conocer el comportamiento de las estructuras construidas con criterios de la Teoría Clásica, según los criterios actuales, permitirá al ingeniero de hoy tratar de la forma más adecuada el abanico de necesidades que se puedan presentar en una estructura existente. Este trabajo se centra en la evolución del conocimiento por lo que no se encuentran incluidos los procesos constructivos. En lo relativo a los criterios de proyecto, hasta mediados del siglo XX, éstos se veían muy influidos por los ensayos y trabajos de autor consiguientes, en los que se basaban los reglamentos de algunos países. Era el caso del reglamento prusiano de 1904, de la Orden Circular francesa de 1906, del Congreso de Lieja de 1930. A partir de la segunda mitad del siglo XX, destacan las aportaciones de ingenieros españoles como es el caso de Alfredo Páez Balaca, Eduardo Torroja y Pedro Jiménez Montoya, entre otros, que permitieron el avance de los criterios de cálculo y de seguridad de las estructuras de hormigón, hasta los que se conocen hoy. El criterio rector del proyecto de las estructuras de hormigón se fundó, como es sabido, en los postulados de la Teoría Clásica, en particular en el “momento crítico”, aquel para el que hormigón y acero alcanzan sus tensiones admisibles y, por tanto, asegura el máximo aprovechamiento de los materiales y sin pretenderlo conscientemente, la máxima ductilidad. Si el momento solicitante es mayor que el crítico, se dispone de armadura en compresión. Tras el estudio de muchas de las estructuras existentes de la época por el autor de esta tesis, incluyendo entre ellas las Colecciones Oficiales de Puentes de Juan Manuel de Zafra, Eugenio Ribera y Carlos Fernández Casado, se concluye que la definición geométrica de las mismas no se corresponde exactamente con la resultante del momento crítico, dado que como ahora resultaba necesario armonizar los criterios de armado a nivel sección con la organización de la ferralla a lo largo de los diferentes elementos estructurales. Los parámetros de cálculo, resistencias de los materiales y formatos de seguridad, fueron evolucionando con los años. Se fueron conociendo mejor las prestaciones de los materiales, se fue enriqueciendo la experiencia de los propios procesos constructivos y, en menor medida, de las acciones solicitantes y, consiguientemente, acotándose las incertidumbres asociadas lo cual permitió ir ajustando los coeficientes de seguridad a emplear en el cálculo. Por ejemplo, para el hormigón se empleaba un coeficiente de seguridad igual a 4 a finales del siglo XIX, que evolucionó a 3,57 tras la publicación de la Orden Circular francesa de 1906, y a 3, tras la Instrucción española de 1939. En el caso del acero, al ser un material bastante más conocido por cuanto se había utilizado muchísimo previamente, el coeficiente de seguridad permaneció casi constante a lo largo de los años, con un valor igual a 2. Otra de las causas de la evolución de los parámetros de cálculo fue el mejor conocimiento del comportamiento de las estructuras merced a la vasta tarea de planificación y ejecución de ensayos, con los estudios teóricos consiguientes, realizados por numerosos autores, principalmente austríacos y alemanes, pero también norteamericanos y franceses. En cuanto a los criterios de cálculo, puede sorprender al técnico de hoy el conocimiento que tenían del comportamiento del hormigón desde los primeros años del empleo del mismo. Sabían del comportamiento no lineal del hormigón, pero limitaban su trabajo a un rango de tensióndeformación lineal porque eso aseguraba una previsión del comportamiento estructural conforme a las hipótesis de la Elasticidad Lineal y de la Resistencia de Materiales, muy bien conocidas a principios del s. XX (no así sucedía con la teoría de la Plasticidad, aún sin formular, aunque estaba implícita en los planteamientos algunos ingenieros especializados en estructuras de fábrica (piedra o ladrillo) y metálicas. Además, eso permitía independizar un tanto el proyecto de los valores de las resistencias reales de los materiales, lo que liberaba de la necesidad de llevar a cabo ensayos que, en la práctica, apenas se podían hacer debido a la escasez de los laboratorios. Tampoco disponían de programas informáticos ni de ninguna de las facilidades de las que hoy se tienen, que les permitiera hacer trabajar al hormigón en un rango no lineal. Así, sabia y prudentemente, limitaban las tensiones y deformaciones del material a un rango conocido. El modus operandi seguido para la elaboración de esta tesis, ha sido el siguiente: -Estudio documental: se han estudiado documentos de autor, recomendaciones y normativa generada en este ámbito, tanto en España como con carácter internacional, de manera sistemática con arreglo al índice del documento. En este proceso, se han detectado lagunas del conocimiento (y su afección a la seguridad estructural, en su caso) y se han identificado las diferencias con los procedimientos de hoy. También ha sido necesario adaptar la notación y terminología de la época a los criterios actuales, lo que ha supuesto una dificultad añadida. -Desarrollo del documento: A partir del estudio previo se han ido desarrollando los siguientes documentos, que conforman el contenido de la tesis: o Personajes e instituciones relevantes por sus aportaciones al conocimiento de las estructuras de hormigón (investigación, normativa, docencia). o Caracterización de las propiedades mecánicas de los materiales (hormigón y armaduras), en relación a sus resistencias, diagramas tensión-deformación, módulos de deformación, diagramas momento-curvatura, etc. Se incluye aquí la caracterización clásica de los hormigones, la geometría y naturaleza de las armaduras, etc. o Formatos de seguridad: Se trata de un complejo capítulo del que se pretende extraer la información suficiente que permita a los técnicos de hoy entender los criterios utilizados entonces y compararlos con los actuales. o Estudio de secciones y piezas sometidas a tensiones normales y tangenciales: Se trata de presentar la evolución en el tratamiento de la flexión simple y compuesta, del cortante, del rasante, torsión, etc. Se tratan también en esta parte del estudio aspectos que, no siendo de preocupación directa de los técnicos de antaño (fisuración y deformaciones), tienen hoy mayor importancia frente a cambios de usos y condiciones de durabilidad. o Detalles de armado: Incluye el tratamiento de la adherencia, el anclaje, el solapo de barras, el corte de barras, las disposiciones de armado en función de la geometría de las piezas y sus solicitaciones, etc. Es un capítulo de importancia obvia para los técnicos de hoy. Se incluye un anejo con las referencias más significativas a los estudios experimentales en que se basaron las propuestas que han marcado hito en la evolución del conocimiento. Finalmente, junto a las conclusiones más importantes, se enuncian las propuestas de estudios futuros. This thesis analyzes the criteria with which structures of reinforced concrete have been designed and constructed prior to 1973. Initially, the year 1970 was chosen as starting point, coinciding with the CEB recommendations, but with the development of the thesis it was decided that 1973 was the better option, coinciding with the Spanish regulations of 1973, whose content, format and description introduced the current criteria. The studied period includes the Classic Theory. The intended goals of this thesis are: 1) To cover a clear gap in the study of evolution of knowledge about reinforced concrete. The concept and accomplishments achieved by reinforced concrete itself has been treated in a very complete way by the main researchers in this area, but not the evolution of knowledge in this subject area. 2) To help the engineers understand structural configurations, geometries, dispositions of steel, safety formats etc, that will serve as preliminary judgments by experts on existing structures. To be a reference to the existing studies about the valuation of resistant capacity of existing constructions, constituting a basic study of a pre-regulation document. This thesis intends to be a help for the current generation of engineers who need to preserve and repair reinforced concrete structures that have existed for a significant number of years. Most of these structures in question were constructed more than 40 years ago, and it is necessary to know the criteria that influenced their design, the calculation and the construction. This thesis intends to determine the safety limits of the old structures and analyze them in the context of the current regulations and their methodology. Thus, it will then be possible to determine the safety of these structures, after being measured and calculated with the current criteria. This will allow the engineers to optimize the treatment of such a structure. This work considers the evolution of the knowledge, so constructive methods are not included. Related to the design criteria, there existed until middle of the 20th century a large number of diverse European tests and regulations, such as the Prussian norm of 1904, the Circular French Order of 1906, the Congress of Liège of 1930, as well as individual engineers’ own notes and criteria which incorporated the results of their own tests. From the second half of the 20th century, the contributions of Spanish engineers as Alfredo Páez Balaca, Eduardo Torroja and Pedro Jiménez Montoya, among others, were significant and this allowed the advancement of the criteria of the calculation of safety standards of concrete structures, many of which still exist to the present day. The design and calculation of reinforced concrete structures by the Classic Theory, was based on the ‘Critical Bending Moment’, when concrete and steel achieve their admissible tensions, that allows the best employment of materials and the best ductility. If the bending moment is major than the critical bending moment, will be necessary to introduce compression steel. After the study of the designs of many existing structures of that time by the author of this thesis, including the Historical Collections of Juan Manuel de Zafra, Eugenio Ribera and Carlos Fernandez Casado, the conclusion is that the geometric definition of the structures does not correspond exactly with the critical bending moment inherent in the structures. The parameters of these calculations changed throughout the years. The principal reason that can be outlined is that the materials were improving gradually and the number of calculated uncertainties were decreasing, thus allowing the reduction of the safety coefficients to use in the calculation. For example, concrete used a coefficient of 4 towards the end of the 19th century, which evolved to 3,57 after the publication of the Circular French Order of 1906, and then to 3 after the Spanish Instruction of 1939. In the case of the steel, a much more consistent material, the safety coefficient remained almost constant throughout the years, with a value of 2. Other reasons related to the evolution of the calculation parameters were that the tests and research undertaken by an ever-increasing number of engineers then allowed a more complete knowledge of the behavior of reinforced concrete. What is surprising is the extent of knowledge that existed about the behavior of the concrete from the outset. Engineers from the early years knew that the behavior of the concrete was non-linear, but they limited the work to a linear tension-deformation range. This was due to the difficulties of work in a non-linear range, because they did not have laboratories to test concrete, or facilities such as computers with appropriate software, something unthinkable today. These were the main reasons engineers of previous generations limited the tensions and deformations of a particular material to a known range. The modus operandi followed for the development of this thesis is the following one: -Document study: engineers’ documents, recommendations and regulations generated in this area, both from Spain or overseas, have been studied in a systematic way in accordance with the index of the document. In this process, a lack of knowledge has been detected concerning structural safety, and differences to current procedures have been identified and noted. Also, it has been necessary to adapt the notation and terminology of the Classic Theory to the current criteria, which has imposed an additional difficulty. -Development of the thesis: starting from the basic study, the next chapters of this thesis have been developed and expounded upon: o People and relevant institutions for their contribution to the knowledge about reinforced concrete structures (investigation, regulation, teaching). Determination of the mechanical properties of the materials (concrete and steel), in relation to their resistances, tension-deformation diagrams, modules of deformation, moment-curvature diagrams, etc. Included are the classic characterizations of concrete, the geometry and nature of the steel, etc. Safety formats: this is a very difficult chapter from which it is intended to provide enough information that will then allow the present day engineer to understand the criteria used in the Classic Theory and then to compare them with the current theories. Study of sections and pieces subjected to normal and tangential tensions: it intends to demonstrate the evolution in the treatment of the simple and complex flexion, shear, etc. Other aspects examined include aspects that were not very important in the Classic Theory but currently are, such as deformation and fissures. o Details of reinforcement: it includes the treatment of the adherence, the anchorage, the lapel of bars, the cut of bars, the dispositions of reinforcement depending on the geometry of the pieces and the solicitations, etc. It is a chapter of obvious importance for current engineers. The document will include an annex with the most references to the most significant experimental studies on which were based the proposals that have become a milestone in the evolution of knowledge in this area. Finally, there will be included conclusions and suggestions of future studies. A deep study of the documentation and researchers of that time has been done, juxtaposing their criteria and results with those considered relevant today, and giving a comparison between the resultant safety standards according to the Classic Theory criteria and currently used criteria. This thesis fundamentally intends to be a guide for engineers who have to treat or repair a structure constructed according to the Classic Theory criteria.