Ozonizaçãoe peroxização de efluente sanitário proveniente de alagados construídos e reator compartimentado anaeróbio/aeróbio visando reuso

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Proposta metodológica para a correção do coeficiente de retorno de esgoto sanitário em unidades com sistemas de aproveitamento de água pluvial

The use of rainwater for non-potable purposes generates a reduction in the consumption of treated water, however, this reduction is not observed in the generation of wastewater, as this is independent of the water source. In Brazil, the pricing on the services of collection and treatment of sewage, in general, is based on the coefficient of return of the sewage disposal system, which has a relation sewer / water proportional to the consumption of treated water measured at the consumer unit. The use of rainwater originating from utilization systems infer on the coefficient, underestimating the volume of wastewater generated. Therefore, this study presents a methodology for setting the coefficient of return. Different roof areas, reservoir volumes and rates of water consumption situations were simulated. The behavior of adjustment of the coefficient of return were also analyzed for the average area per capita roof (m² / inhabitant) of Rio Claro - SP. As a result, it can be seen that the adjustment of the coefficient of return is directly proportional to the increase of the roof areas and the volumes of reservoirs, and inversely proportional to the total water demand. The corrected coefficient of return showed the minimum value of 0.83 and a maximum value of 1.45, this variation corresponds to the maximum ratio between the demands of total water and rainwater, since the exploitation of rain water should be used only for non-potable uses, according to NBR 15527 / 07. To the municipality of Rio Claro - SP was noted an adjustment of the coefficient of return ranging from 0.99 to 6.61

Determinação de metais em água produzida de petróleo

In order to enable the reuse of the large surplus volume of petroleum produced water for irrigation of crops inedible, the quality evaluation of this water is very important. This work aimed to evaluate the effectiveness of the diffusive gradient in thin films technique (DGT) for the determination of labile Cu (II), Mn (II) and Zn (II) in petroleum produced water destined to reuse in agriculture. Samples were collected at the exit of the wastewater treatment plant (WWTP) (after separation oil/water and flotation) of a Petrobrás onshore production region. Basically, the laboratory experiments with DGT devices involved the evaluation of the behavior of the main variables of the technique for determination of analytes in the samples (diffusion coefficients, immersion time, fractionation of organic and inorganic species, and performance of diffusion gels with different porosities, among others). Also, experiments were conducted based on the solid phase extraction (SPE) protocol with Chelex- 100 resin using previously established protocols to support the study. During the project the possibility of in situ immersions in water treatment plants was evaluated. The DGT technique presented satisfactory results for determination of Mn in produced water, and can be used for in situ determinations. However, the results obtained for Cu and Zn show the need of additional studies

Indústria automobilística brasileira entre os anos 90 e os 2000: uma análise acerca da estratégia de plataformas

Este trabalho faz um estudo comparativo sobre a estratégia de plataformas na indústria automobilística brasileira entre os anos 90 e 2000. Para tanto, definiu-se o conceito de plataformas na indústria automobilística, a intensificação dos estudos sobre sua eficiência ao longo do tempo e o impacto da reutilização e adaptação de plataformas na redução de custos. Os resultados do estudo colaboraram no entendimento dos projetos de desenvolvimento de produto na indústria automotiva nacional, colaborando para a comparação entre a evolução do cenário brasileiro com a de outros cenários como Reino Unido e os BRICs

Utilização de biossurfactante e surfactante químico para dessorção de óleo presente em vermiculita hidrofobizada: estudo comparativo

A number of methods and products have been developed in order to eliminate or reduce the negative effects that hydrocarbons cause to the environment, including hydrophobic expanded vermiculite, used in oil residue filtering systems at gas stations. However, upon adsorbing organic compounds, the vermiculite is no longer used and is sent to landfills. The aim of the present study was to wash granular and powdered vermiculite containing oil lubricant in its pores with distilled water and solutions of 0.1% SDS surfactant and rhamnolipids, with the aim of removing the lubricant and the possibility of reusing the mineral. The greatest amount of lubricant removal was obtained through washing with 0.1% SDS and both granulometric forms. This may be associated to the industrial purification received by the surfactant. However, the biosurfactant is ecologically more viable due to its low toxicity and ease of degradability. In the readsorption tests, greatest adsorption was obtained with the granular vermiculite washed in SDS solution. In order to enable the reuse of the mineral, further tests are needed to enhance desorption/adsorption efficiency.

Gestão de resíduos de demolição e da construção civil no município de Guaratinguetá-SP

The large volume of waste generated by construction and demolition has become increasingly a matter of concern to society. The handling and disposal of RCD's to gain prominence as over the years intensified the requirements for a sustainable world. This paper presents the positive and negative factors that the management of construction and demolition waste can bring in the municipality of Guaratinguetá-SP. This study examines the methods used in waste management since he was not done any treatment to the present day. Presents comparative tables on the feasibility of installing a central crushing of inert waste and implementation of an inert waste landfill in the municipality of Guaratinguetá and Cachoeira Paulista. And yet the work being done by the city of Guaratinguetá reuse the material in class A in paving roads

Recuperação de resíduos plásticos provenientes dos processos de injeção

The competitiveness among global markets, the constant need for reducing manufacturing costs and also the growing environmental commitments are fueling the development of techniques for recovery residual parts generated by industrial processes. Among the various areas of a company, we highlight those that involve the processing of raw materials derived from oil, such as polymers (resins), which may take centuries to decompose in the environment and also present as a economic and environmentally strategic point. Thus, this study would examine the recovery of waste polypropylene, from the injection process of a major multinational in the field of home appliances through the recycling by a process comprising the milling, extrusion and chipping of waste material. Easy to deploy, this proposal aims to reduce levels negligible disposal (scrap) of these residues as well as the reintegration of the production process into pieces no visual and no structural importance, aimed at cutting costs and reducing environmental impacts caused. After the survey data in kilograms of waste material generated in a given period of time, and the study of changes in material properties, it would enable the reuse steadily in the injection process

Análise ambiental em um canteiro de obras

The building sector can cause the environmental degradation, by the natural resources consumption, machinery use and natural landscape modifying. The environmental management system (EMS) improves the environmental quality and makes the companies more competitive. So, this work developed an environmental management system in a building site focused on the solid waste and in the development of mitigation proposals for the most significant environmental impacts. To develop this work it was necessary to follow the building site activities; evaluate the solid waste management; identify the law requirements; identify the environmental aspects and impacts; evaluate the environmental impacts; and propose alternatives for mitigating the adverse environmental critical impacts. The main proposals are the reduction of the waste generation in the place that it’s generated; the reuse and correct final disposal of that wastes; the treatment and reuse of the effluent; and the supervising in the trucks and machineries avoiding the oil spilling and the air pollution

A contribuição de modelos utilizando uma abordagem modelo - código

In a world that is increasingly working with software, the need arises for effective approaches that encourage software reuse. The reuse practice must be aligned to a set of practices, procedures and methodologies that create a stable and high quality product. These questions produce new styles and approaches in the software engineering. In this way, this thesis aims to address concepts related to development and model-driven architecture. The model-driven approach provides significant aspects of the automated development, which helps it with produced models built in the specification phase. The definition of terms such as model, architecture and platform makes the focus becomes clearer, because for MDA and MDD is important to split between technical and business issues. Important processes are covered, so you can highlight the artifacts that are built into each stage of model-driven development. The stages of development: CSM, PIM, PSM and ISM, detailing the purpose of each phase in oriented models, making the end of each stage are gradually produced artifacts that may be specialized. The models are handled by different prospects for modeling, abstracting the concepts and building a set of details that portrays a specific scenario. This retraction can be a graphical or textual representation, however, in most cases is chosen a language modeling, for example, UML. In order to provide a practical view, this dissertation shows some tools that improve the construction of models and the code generate that assists in the development, keeping the documentation systemic. Finally, the paper presents a case study that refers to the theoretical aspects discussed throughout the dissertation, therefore it is expected that the architecture and the model-driven development may be able to explain important features to consider in software engineering

A nova habitação social: concepções inovadoras aplicadas em ZEIS

Discussions on the production of housing for residents of low income, in Brazil, has come a long, but still no great solutions. Not only a political problem, the issue of housing involves also social and economic issues. From the beginning there was a downward grade of the slum villages more sophisticated more precarious, as if the social scale. And that is what this work will be done. In an attempt to produce forms of housing for low-income population, but not to be a mere product of capitalism, or political propaganda, but to try to reach a real solution to the problem. The project will propose new forms of construction, use of renewable energy, reuse of water and other, besides new forms of construction, the project aims to create a sustainable education to future residents

A conservação da biodiversidade no setor empresarial

A conservação da biodiversidade é tema recorrente nas ciências e nas políticas já há algumas décadas, porém esta inquietação não é recente, visto que muitos naturalistas de séculos passados alertaram sobre as adversidades da perda da biodiversidade. Mais recentemente, a sociedade passou a exigir das empresas uma postura pró-conservação, pois são elas as maiores responsáveis pela degradação ambiental. Sendo assim, esta pesquisa analisou como a conservação da biodiversidade está inserida no setor de negócios e quais práticas têm sido adotadas para alcançar este fim. Em um primeiro momento, foi feito um histórico a respeito da conservação da biodiversidade desde os primeiros naturalistas até as grandes cúpulas mundiais sobre meio ambiente. Posteriormente, foi discutida a importância da inter-relação entre a biodiversidade e o setor empresarial. Por fim, foram levantados os principais instrumentos de gestão ambiental utilizados pelas empresas. Para ilustrar este arcabouço teórico, foram identificados os principais acordos multilaterais pró-conservação da biodiversidade e as mais novas ferramentas de gestão ambiental desenvolvidas e aplicadas no setor empresarial. Além disso, foi conduzido um estudo de caso com duas empresas brasileiras do setor de cosméticos, fundamentados nos seus respectivos Relatórios de Sustentabilidade, que subsidiaram a extração de informações sobre o modo como as empresas gerenciam seus recursos naturais. Concluiu-se que as empresas analisadas possuem boas práticas ambientais, exemplificadas em um estudo de caso a partir do qual foi possível conhecer as ações em andamento que versam sobre economia de energia, economia e reutilização da água, compensação das emissões dos gases de efeito estufa, gerenciamento de resíduos sólidos e investimentos em projetos socioambientais... (Resumo completo, clicar acesso eletrônico abaixo)

Investigação do tratamento de água de máquina de lavar roupa empregando reator biológico, em escala piloto, visando redução da concentração de fósforo para reúso não potável

This research aims at the study of treatment of clothes washing water through biological treatment, for the purpose of evaluating the reduction of phosphorus to make it suitable for a posterior treatment of physical-chemical. For this purpose it was employed a sequencing batch reactor, consisting of aerobic and anaerobic phases. During the project it was verified not only the reduction of phosphorus (removal of 30 to 50%) but also the reduction of BOD, COD, Turbidity and Nitrate (removal of 38 to 36%, 34 to 41%, 72,3 to 75% and 57,8 to 60% respectively), which demonstrates that the proposed treatment can assist advanced treatments of water for its non potable reuse

Durabilidade da argamassa mista de revestimento interno contendo dregs-grits em substituição à areia

This paper concerns about the durability of new material in construction. It is noteworthy the fact that increases increasingly searching for alternative materials that do not depend only of natural resources and at the same time be an alternative for reuse of industrial waste. Since the construction materials have a long life and a high cost of civil works and maintenance, it is crucial to estimate the behavior of a new product. Thus , this work discuss the durability of mixed mortar lining , made with waste from the process Kraft pulp production , known as dregs and grits , in partial replacement of sand. Tests were conducted to simulate conditions as adverse environments of constant heat and fire, with the aim of analyzing the behavior of mortar mixed matched the behavior of standard mortar

Estudo da elaboração do plano de descomissionamento para desativação de empreendimentos

Deconstructions, although hardly covered in Civil Engineering courses, are a very important field of study. Due to numerous factors, such as obsolescence, buildings life cycle comes to an end leading to their deactivations. Decommissioning is a process that intends to plan the hole deactivation by providing the cleaning of contaminated areas, avoiding risks to public health, as well as promoting a screening of generated waste, whether dangerous or not, offering their correct disposal or even reuse when possible. Decommissioning must be developed by a plan that covers from the recognition of the area until its releases to other uses. When this procedure is appropriate, attention must be paid to the cost effective of its implementation and to the cleaning standard that the plan intends to reach. The execution of the service allows to reuse the area, becoming productive again

Potencial de aproveitamento de agregados reciclados de resíduos da construção e demolição

CONAMA Resolution 307 / 02, in Article 4, states that the primary goal of those involved in the reuse process of construction and demolition waste is not the generation of such wastes, secondarily is the reduce, reuse, recycling and proper disposal of such material. The disposal problem of large volumes of waste generated coupled with the scarcity of natural resources and environmental degradation involved in the extraction process of such materials resulted in several studies, that after many analyzes proposed various forms of reuse and recycling . The NBR 15.116/04 provides requirements for the use of recycled aggregates in paving and concrete without structural function. This work aims to show the usage potential of recycled aggregates from waste generated in construction and demolition sampled Group AB Areias, Pindamonhangaba (SP) in order to meet the standards in Brazil, as well as the environmental contribution by reducing the use of raw materials extracted from nature. After stabilization and particle size analysis of the California Bearing Ratio and Proctor, obtained mixtures of recycled aggregates showed higher values submitted by the minimum standards related, with excellent potential for use in paving