999 resultados para Programa de aplicação
Resumo:
Objective to establish a methodology for the oil spill monitoring on the sea surface, located at the Submerged Exploration Area of the Polo Region of Guamaré, in the State of Rio Grande do Norte, using orbital images of Synthetic Aperture Radar (SAR integrated with meteoceanographycs products. This methodology was applied in the following stages: (1) the creation of a base map of the Exploration Area; (2) the processing of NOAA/AVHRR and ERS-2 images for generation of meteoceanographycs products; (3) the processing of RADARSAT-1 images for monitoring of oil spills; (4) the integration of RADARSAT-1 images with NOAA/AVHRR and ERS-2 image products; and (5) the structuring of a data base. The Integration of RADARSAT-1 image of the Potiguar Basin of day 21.05.99 with the base map of the Exploration Area of the Polo Region of Guamaré for the identification of the probable sources of the oil spots, was used successfully in the detention of the probable spot of oil detected next to the exit to the submarine emissary in the Exploration Area of the Polo Region of Guamaré. To support the integration of RADARSAT-1 images with NOAA/AVHRR and ERS-2 image products, a methodology was developed for the classification of oil spills identified by RADARSAT-1 images. For this, the following algorithms of classification not supervised were tested: K-means, Fuzzy k-means and Isodata. These algorithms are part of the PCI Geomatics software, which was used for the filtering of RADARSAT-1 images. For validation of the results, the oil spills submitted to the unsupervised classification were compared to the results of the Semivariogram Textural Classifier (STC). The mentioned classifier was developed especially for oil spill classification purposes and requires PCI software for the whole processing of RADARSAT-1 images. After all, the results of the classifications were analyzed through Visual Analysis; Calculation of Proportionality of Largeness and Analysis Statistics. Amongst the three algorithms of classifications tested, it was noted that there were no significant alterations in relation to the spills classified with the STC, in all of the analyses taken into consideration. Therefore, considering all the procedures, it has been shown that the described methodology can be successfully applied using the unsupervised classifiers tested, resulting in a decrease of time in the identification and classification processing of oil spills, if compared with the utilization of the STC classifier
Resumo:
The geological modeling allows, at laboratory scaling, the simulation of the geometric and kinematic evolution of geological structures. The importance of the knowledge of these structures grows when we consider their role in the creation of traps or conduits to oil and water. In the present work we simulated the formation of folds and faults in extensional environment, through physical and numerical modeling, using a sandbox apparatus and MOVE2010 software. The physical modeling of structures developed in the hangingwall of a listric fault, showed the formation of active and inactive axial zones. In consonance with the literature, we verified the formation of a rollover between these two axial zones. The crestal collapse of the anticline formed grabens, limited by secondary faults, perpendicular to the extension, with a curvilinear aspect. Adjacent to these faults we registered the formation of transversal folds, parallel to the extension, characterized by a syncline in the fault hangingwall. We also observed drag folds near the faults surfaces, these faults are parallel to the fault surface and presented an anticline in the footwall and a syncline hangingwall. To observe the influence of geometrical variations (dip and width) in the flat of a flat-ramp fault, we made two experimental series, being the first with the flat varying in dip and width and the second maintaining the flat variation in width but horizontal. These experiments developed secondary faults, perpendicular to the extension, that were grouped in three sets: i) antithetic faults with a curvilinear geometry and synthetic faults, with a more rectilinear geometry, both nucleated in the base of sedimentary pile. The normal antithetic faults can rotate, during the extension, presenting a pseudo-inverse kinematics. ii) Faults nucleated at the top of the sedimentary pile. The propagation of these faults is made through coalescence of segments, originating, sometimes, the formation of relay ramps. iii) Reverse faults, are nucleated in the flat-ramp interface. Comparing the two models we verified that the dip of the flat favors a differentiated nucleation of the faults at the two extremities of the mater fault. V These two flat-ramp models also generated an anticline-syncline pair, drag and transversal folds. The anticline was formed above the flat being sub-parallel to the master fault plane, while the syncline was formed in more distal areas of the fault. Due the geometrical variation of these two folds we can define three structural domains. Using the physical experiments as a template, we also made numerical modeling experiments, with flat-ramp faults presenting variation in the flat. Secondary antithetic, synthetic and reverse faults were generated in both models. The numerical modeling formed two folds, and anticline above the flat and a syncline further away of the master fault. The geometric variation of these two folds allowed the definition of three structural domains parallel to the extension. These data reinforce the physical models. The comparisons between natural data of a flat-ramp fault in the Potiguar basin with the data of physical and numerical simulations, showed that, in both cases, the variation of the geometry of the flat produces, variation in the hangingwall geometry
Resumo:
The increasing use of shallow seismic methods of high resolution, for investigations of geological problems, environmental or industrial, has impelled the development of techniques, flows and computational algorithms. The practice of applying techniques for processing this data, until recently it wasn t used and the interpretation of the data was made as they were acquired. In order to facilitate and contribute to the improvement of the practices adopted, was developed a free graphical application and open source, called OpenSeismic which is based on free software Seismic Un*x, widely used in the treatment of conventional seismic data used in the exploration of hydrocarbon reservoirs. The data used to validate the initiative were marine seismic data of high resolution, acquired by the laboratory of Geology and Marine Geophysics and Environmental Monitoring - GGEMMA, of the Federal University of Rio Grande do Norte UFRN, for the SISPLAT Project, located at the region of paleo-valley of the Rio Acu. These data were submitted to the processing flow developed by Gomes (2009), using the free software developed in this work, the OpenSeismic, as well other free software, the Seismic Un*x and the commercial software ProMAX, where despite its peculiarities has presented similar results
Resumo:
The Baixa grande fault is located on the edge of the S-SW Potiguar Rift. It limits the south part of Umbuzeiro Graben and the Apodi Graben. Although a number of studies have associated the complex deformation styles in the hanging wall of the Baixa Grande Fault with geometry and displacement variations, none have applied the modern computational techniques such as geometrical and kinematic validations to address this problem. This work proposes a geometric analysis of the Baixa Fault using seismic interpretation. The interpretation was made on 3D seismic data of the Baixa Grande fault using the software OpendTect (dGB Earth Sciences). It was also used direct structural modeling, such as Analog Direct Modeling know as Folding Vectors and, 2D and 3D Direct Computational Modeling. The Folding Vectors Modeling presented great similarity with the conventional structural seismic interpretations of the Baixa Grande Fault, thus, the conventional interpretation was validated geometrically. The 2D direct computational modeling was made on some sections of the 3D data of the Baixa Grande Fault on software Move (Midland Valley Ltd) using the horizon modeling tool. The modeling confirms the influence of fault geometry on the hanging wall. The Baixa Grande Fault ramp-flat-ramp geometry generates synform on the concave segments of the fault and antiform in the convex segments. On the fault region that does not have segments angle change, the beds are dislocated without deformation, and on the listric faults occur rollover. On the direct 3D computational modeling, structural attributes were obtained as horizons on the hanging wall of the main fault, after the simulation of several levels of deformation along the fault. The occurrence of structures that indicates shortening in this modeling, also indicates that the antiforms on the Baixa Grande Fault were influenced by fault geometry
Resumo:
OBJETIVO: Este estudo objetivou apreender algumas características sócio-sanitárias do grupo de beneficiários do Programa de Suplementação Alimentar de unidade básica de saúde de um município de médio porte do interior paulista. Especificamente, buscou-se delinear o perfil deste grupo quanto aos fatores de risco para a desnutrição infantil a que estava exposto e dimensionar a utilização dos critérios de inclusão neste programa. MÉTODOS: A pesquisa é de cunho descritivo e se baseou em documentos oficiais vigentes para a definição dos fatores de risco a serem analisados. Foram avaliadas 290 crianças cujas mães ou responsáveis foram entrevistados, segundo um protocolo previamente estabelecido. RESULTADOS: O grupo de beneficiários caracterizou-se por ser heterogêneo quanto à freqüência e ao grau da exposição a fatores de risco para a desnutrição, denotando que há diferenças nos problemas socioeconômicos e sanitários apresentados, como também na combinação entre eles, em cada família. CONCLUSÃO: Para a otimização do programa, ainda vigente no município, sugere-se a padronização loco-regional de critérios de inclusão, conforme a proposta oficial central, com o registro claro dos mesmos e, também, a aplicação de métodos avaliativos periódicos, adequada capacitação da equipe de saúde e maior envolvimento da população usuária.
Resumo:
Cette étude évalue les implications de la Bolsa Familia dans les éléments du thème de la sécurité alimentaire, en prenant comme paramètres des bénéficiaires de la ville de Araraquara, SP. Des formulaires de demande de semi-structurés avec les bénéficiaires et les observations de terrain, le diagnostic a été réalisée dans le but de l'évaluation théorique des politiques publiques.
Resumo:
Aplicações de herbicidas em estádios mais avançados de desenvolvimento da cana-de-açúcar, em pré ou em pós-emergência inicial das plantas infestantes, podem ser feitas em jato dirigido, para que o produto atinja diretamente o alvo. Com esse fim, avaliaram-se 10 bicos TF-VS4 a 30 lbf/pol2, determinando-se as vazões e os padrões de deposição em 6 alturas (entre 9 e 36cm), em mesa de prova com 67 canaletas. Após isso, um programa computacional simulou o padrão de deposição de dois bicos separados entre 20 e 70cm no centro da entre linha da cana-de-açúcar. Os resultados indicaram que as vazões obtidas com bicos individuais apresentaram média de 2,3 l/min, com coeficiente de variação 2,5% e os padrões de deposição mostraram boa precisão com um intervalo de confiança estreito. Foi possível selecionar as melhores combinações de altura (A) e espaçamento (E) entre dois bicos, para os espaçamentos usuais de cana-de-açúcar; sendo que as melhores combinações mostraram relação E/A próxima de 1,4. Por exemplo, A = 35 cm e E = 50 cm para cana-de-açúcar a 140cm entrelinhas.
Resumo:
OBJETIVO: A hemiparesia é um comprometimento parcial do hemicorpo que altera o equilíbrio, sendo este essencial para as atividades funcionais. OBJETIVO: Avaliar o equilíbrio em pacientes hemiparéticos submetidos ao treino de equilíbrio com o programa Wii Fit, que atuou como um recurso de biofeedback visual. MÉTODO: Foram selecionados 12 pacientes hemiparéticos pós AVE, 5 do sexo masculino e 7 do sexo feminino, com idade média de 58 ± 12,57 anos, divididos aleatoriamente em dois grupos. Um deles realizou a fisioterapia convencional (GC) pelo período de uma hora, o outro realizou por trinta minutos e mais trinta minutos de treino de equilíbrio com auxílio do Wii Fit (GW), duas vezes por semana durante cinco semanas, completando dez sessões. O equilíbrio foi avaliado antes e após as intervenções, por meio da aplicação da Escala de Equilíbrio de Berg (EEB) e pela estabilometria, que mensura a oscilação do centro de pressão (COP), nos eixos ântero-posterior (AP) e médio-lateral (ML), por uma plataforma de pressão em duas condições: de olhos abertos (OA) e olhos fechados (OF). RESULTADOS: de acordo com a EEB, os pacientes, tanto do GC quanto o do GW, obtiveram maior controle do equilíbrio estático e dinâmico. Na avaliação do COP no eixo ML, os indivíduos do GC e do GW tiveram diminuição na oscilação ML após a intervenção proposta para cada grupo, nas condições de OA e OF. No eixo AP do COP, o GC não teve diminuição na oscilação AP de OA e OF, e o GW apresentou diminuição na oscilação AP de OA e OF. CONLUSÃO: O presente estudo demonstra que a fisioterapia associada ao treino de equilíbrio com o Wii Fit apresenta resultados significantes na reabilitação dos indivíduos hemiparéticos, obtendo, assim, mais um recurso terapêutico na fisioterapia.
Resumo:
INTRODUÇÃO: A doença renal crônica (DRC) é decorrente de uma lesão renal e perda progressiva e irreversível da função dos rins. A hemodiálise substitui parcialmente essa função, com o objetivo de corrigir as alterações metabólicas na DRC. Para acompanhar a adequação da diálise, é determinado o Kt/V - índice de depuração da ureia por sessão de hemodiálise. O exercício físico de moderada intensidade tem se mostrado de fundamental importância para melhorar os efeitos adversos ao tratamento dialítico. OBJETIVOS: Avaliar o Kt/V em indivíduos com DRC submetidos ao exercício físico isotônico de baixa intensidade durante a hemodiálise. MATERIAIS E MÉTODOS: Analisados dados de 15 voluntários de ambos os sexos, submetidos à hemodiálise três vezes por semana. Após duas horas do início da diálise, foi aplicado um protocolo de exercícios isotônicos de baixa intensidade de membros superiores e inferiores com duração de 30 minutos, por um período de três meses. Os valores do Kt/V foram comparados no período de três meses anteriores sem exercício e após três meses de exercício. RESULTADOS: A média dos valores do Kt/V nos três meses sem exercício foi de 1,13 ± 0,11 e após aplicação do programa de exercícios foi de 1,29 ± 0,12 (p < 0,05). CONCLUSÃO: O programa de exercício físico isotônico de baixa intensidade em pacientes com DRC, aplicados durante a sessão de diálise mostrou a melhora da eficiência dialítica.
Resumo:
Os programas comerciais de transferência de embriões em éguas existem por mais de três décadas e são hoje uma das biotécnias mais utilizadas na reprodução assistida de equinos. O exame ultrassonográfico nos períodos pré e pós-cobertura de doadoras de embriões, assim como a avaliação de receptoras no momento da inovulação é de vital importância para o êxito de um programa de transferência de embriões. A ultrassonografia Doppler é uma técnica não-invasiva que permite a avaliação em tempo real da hemodinâmica do trato reprodutivo de animais de grande porte. Por fornecer detalhes anatômicos e informações imediatas sobre a fisiologia do fluxo sanguíneo de tecidos e órgãos, o exame doppler permite a avaliação do potencial ovulatório de folículos e do status funcional de corpo lúteo e útero, além de ser uma técnica auxiliar para o diagnóstico de distúrbios na hemodinâmica do sistema reprodutivo. Alterações na perfusão sanguínea dos futuros folículos dominantes são detectáveis em diferentes fases de seu desenvolvimento, como na divergência folicular e no período pré-ovulatório. A partir dessas informações, é possível determinar o princípio da atividade sexual e o momento ideal para o início de tratamentos superovulatórios e indutores de ovulação, assim como o momento mais apropriado para a realização de coberturas de éguas doadoras de embriões. A avaliação através do modo-Doppler do corpo lúteo e útero de éguas receptoras é também um instrumento auxiliar para a seleção de animais com perfil sérico de progesterona e ambiente uterino adequados para a sobrevivência do embrião e manutenção da gestação. Essa técnica pode ser útil ainda ao se avaliar a interação concepto-maternal. Apesar da aplicabilidade da tecnologia doppler dentro de programas de transferência de embriões, novos estudos visando a determinar padrões de normalidade e posterior caracterização de distúrbios de fluxo sanguíneo de trato reprodutivo ainda se fazem necessários.
Resumo:
Considerando que as mulheres idosas e pobres são propensas à maior vulnerabilidade nas condições de saúde, no presente estudo propôs-se a identificar os diagnósticos de enfermagem, segundo a taxonomia II de NANDA, sobre um grupo de idosas consideradas muito pobres. Foram selecionadas 69 idosas, a partir da aplicação do instrumento de Classificação Econômica Brasil (CCEB) em 301 idosos residentes na área de abrangência de um PSF. O estado de saúde das idosas foi avaliado utilizando-se a Avaliação Geriátrica Ampla (AGA), que envolve os aspectos funcionais, emocionais, sociais e ambientais. Foram identificadas 23 categorias diagnósticas nas idosas do estudo e uma média de 7,4 diagnósticos/ idosa. Entre os diagnósticos mais freqüentes destacam-seMobilidade física prejudicada,Dor crônica,Manutenção do lar prejudicada. Os diagnósticos revelaram-se impor tantes na caracterização das complexas necessidades apresentadas pelas idosas e no grande avanço no direcionamento da assistência.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Engenharia Mecânica - FEIS
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Televisão Digital: Informação e Conhecimento - FAAC