Épocas de consórcio de alho com beterraba perante três manejos do mato sobre a produtividade e o lucro

The research was carried out with intercropped cultivation of garlic and beet, in Caçador, SC, Brazil. Four seeding epochs for beet (0, 15, 30 and 45 days after garlic planting) and three management systems for weeds (with herbicides, without control and with frequent weeding) were tested. It was hoped to determine the effects of this intercropping, in time and space, seeking the benefits in .weed control, efficient land use, productivity, commercial quality, and profitability. The randomized block design was in split-plots. The epochs represented the plots, and the management, the subplots, with four replicates. Napromide at 750 g/ha did not cause symptoms of intoxication in the garlic plants, nor in the beet. All the treatments in epochs at the initiation of intercropping, in three management systems for weeds, presented efficient land use values greater than 1. The profitability of the intercropping of garlic and beet only became evident in the management involving frequent weeding; in all epochs, profits were greater than for the respective epochs of monoculture of beet and monoculture of garlic.

Variação da massa específica da madeira de Eucalyptus grandis aos 8 anos de idade em função de diferentes níveis de produtividade

It were analyzed Eucalyptus grandis trees of 8 years old in the forest group of Duraflora S/A, with different annual increments based on volume, to the related studies of specific gravity values based on productivity indexes. The methodology used in analysis of specific gravity was the gamma-ray attenuation technique of Americium-241. The Eucalyptus grandis showed a specific gravity decreasing with the increasing of parcel productivity. For a gain of 3,5 m3 in productivity there was a decreasing of 1% in specific gravity. Nevertheless, it was not observed correlation between specific gravity and basal area in a same parcel. The present work stands out too, some of the difficulties found with relation to wood specific gravity determinations and emphasize the importance of take samples in the form of full rounded plates in three or four relative positions in the tree.

Períodes de controle de Brachiaria sp e seus reflexos na produtividade de Eucalyptus grandis

A field trial was conduced in Piratininga, São Paulo State, Brazil, from August to 1991 to May 1999, aiming to study the effects of weed interference on the productivity of Eucalyptus grandis W. Hill Ex Maiden. The experimental design was complete randomized blocks with four replications. The treatments consisted of different extensions and times of the weed free period. The weed free periods were divided in two groups. In the first one, the weed free period were from the Eucalyptus planting to 28, 56, 112, 140, 168, 224, 278 and 360 days. In the second group the weed free period began at 0, 28, 56, 112, 140, 168, 224 and 278 days after the planting and finished at 364 days. The main weeds were Brachiaria decumbens and Brachiaria brizantha. The eucalypt plants were strong susceptive at weed interference at 12 months after planting, it was showing PAI of 12 and 6 days, when to consider 2 and 5% reduction on height. Although, to assure crop productivity at Piratininga it was necessary to maintain a weed free period of to 364 and 365 days after planting (PTPI) at 12 months, 194 and 166 days after planting at 24 months, 188 and 130 days after planting at 36 months, 88 and 54 days after planting at 48 months and 155 and 133 days after planting at 78 months, when to consider 2 an 5% reduction on heigth. But, if when to consider the DAP, the PTPI was 242 and 200 days after planting at 24 months, 208 and 153 days after planting at 36 months, 224 and 150 days after planting at 48 months and 134 and 119 days after planting at 78 months. Although when to consider the wood volume it was necessary to keep the weed free from the planting to 153 and 142 days at 36 months after planting, 99 and 91 days at 48 months after planting and 92 and 72 days at 78 months after planting (crop). However, in area to suggest the recuperation the eucalypt plants at weed Interference.

Desenvolvimento e produtividade da cúrcuma (Curcuma longa L.) em função de doses de nitrogênio e potássio

The objective of the experiment was evaluating the development and production of turmeric, it was carried out at FCAV-UNESP, in Jaboticabal-SP, during 11/18/ 1999 to 7/18/2000, in randomized blocks, with three replications, factorial scheme 5 × 5. The factors evaluated were doses of N (0, 68, 136, 170 and 204 kg.ha-1) and doses of K2O (0, 92, 184, 230 and 276 kg.ha-1). The potassium doses influenced plant-mother's height significantly, answering lineally to the increment in the potassium fertilization. There was significant interaction between nitrogen and potassium on the number of leaves of the sons and total-plant. In the doses of 0 and 92 kg of K2O.ha-1 a lineal increase was observed in the number of leaves with the increment of the applied nitrogen. The potassium doses also influenced the foliar area of the sons and total-plant, reaching values of 3260 and 4971 cm2 per plant, respectively, for the application of 276 kg K2O.ha1. The number of sons had a lineal increment with the growing fertilization of potassium, contemplating on the dry mass of the aerial part of the sons. The production of rhizomes per plant wasn't influenced for the factors evaluated.

Efeitos do tipo de rizoma de multiplicação e da cobertura morta no desenvolvimento e produtividade de cúrcuma (Curcuma longa L.)

The aim of this study was to evaluate the influence of different types of rhizomes utilized as seed and the effects of mulch in the culture of Turmeric. This work was conducted in the experimental cultivation area of the Universidade de Ribeirão Preto - UNAERP, in Ribeirao Preto, state of Sao Paulo, Brazil from September/1997 to July/1998. The experiments were arranged in a randomized complete block with a factorial arrangement 2x3, design with 4 replications (32 plants each). The treatments consisted of the use of types of rhizomes utilized to proliferation (head and finger) and types of mulch (absent, grass and leaves/branches). This study investigated proliferation (61, 88 and 124 days after installation), length, shooting and number of leaves of the mother plant besides the number of leaves of the shoot (112, 146 and 233 days after installation), number of finger rhizomes and head rhizomes, fresh and dry biomass of rhizomes and the yield of essential oil (after harvest - July 1998). Obtained results showed a great influence of the type of rhizome used to proliferation. Head rhizomes produced, in weight, about 30% more, when compared to plants from finger rhizomes. Mulching almost duplicated rhizome productivity from 2338 kg.ha -1 of dry rhizomes to 4499 kg.ha -1, when rhizome used to proliferation was finger and from 3046 kg.ha -1 to 5943 kg.ha -1, when using head rhizomes. The yield of essential oil did not show any alteration, independently of the treatments realized.

Atributos químicos do solo e produtividade do milho afetados por corretivos e manejo do solo

A field experiment was carried out in the Lageado Experimental Farm belonging to the São Paulo State University - UNESP, Campus of Botucatu, SP, in a distrophic Nitosoil in 1997/98. The objective was to compare the effects of magnesium termophosphate; termophosphate + lime; termophosphate + phosphogypsum + sugarcane vinnace application on the chemical characteristics of the soil and on the corn (Zea mays L.) yield cultivated in no-tillage and conventional tillage systems. The Crotalaria juncea was cultivated as mulch-producing to make possible the establishment of the tillage systems. The mean modifications in the soil fertility were due to aplication of the magnesium termophosphate. The differences between the two tillage systems, related to crop productivity, were associated to the smaller N content in the corn leaf in the no-tillage system.

Intervalo hídrico ótimo e produtividade de cultivares de soja

The objective of this study was to determine the optimal water interval and its relationship with soybean yield. For this study, an experiment was carried out in Jaboticabal, São Paulo State, Brazil, in a Haplustox medium textured soil. The experimental design consisted of a completely randomized with subdivided plots (six compaction levels and four soybean cultivars), with four replications. The soil compaction levels were: T 0 = 0, T 1* = 1, T 1 = 1, T 2 = 2, T 4 = 4 and T 6 = 6 strides of a 11 ton tractor, on the same place, side by side on soil surface. In T 1* the compaction occurred when the soil was dry. In December, 2003 the soybean (Glycine max), cultivars IAC Foscarin 31, MG/BR 46 (Conquista), BRS/MG 68 (Vencedora) and IAC 8 - 2 were sown. After sowing, indeformed soil samples were collected in layers of 0.03-0.06, 0.08-0.11, 0.15-0.18 and 0.22-0.25 m for determination of soil water content and resistance to penetration curve and the optimal water content. According to model, the critical soil bulk density (Dsc) for soybean yield varied between cultivars from 1.56 to 1.64 Mg m -3. The soil bulk density at which the yield of soybean cultivars decreased was greater than the Dsc.

Correlação da produtividade do feijão com a resistência à penetração do solo sob plantio direto

The soil mechanical resistance to penetration (PR) has great influence on vegetative development as the root growth and the crop productivity change in inverse proportion. Thus, the objective of this research was to study correlation between the bean grain productivity and the PR in an Oxisol cultivated for four years in no-tillage system at FEIS/UNESP. The attributes PR and yield were determined in a regular grid with 119 sample points. The PR was determined in the layers of 0-0.05, 0.05-0.10, 0.10-0.15, 0.15-0.20 and 0.25-0.30 m. The results were submitted to procedures of descriptive statistics, linear correlation and geostatistic analysis. The linear correlation between the yield and PR was practically null, as in all soil layers investigated it showed determination coefficients (R2) smaller than 0.03 and not significant. The geostatistic analysis showed moderate structure of spatial dependency for PR in the layers of 0.05-0.10 and 0.10-0.15 m, and strong for yield; however, the conjugate spatial analysis of such attributes showed no correlation, therefore, the spatial variability of PR did not influence the yield.

Mapeamento da produtividade e perímetro do tronco de clones de seringueira em argissolo vermelho amarelo

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Efeitos de níveis de cobertura do solo sobre a produtividade e crescimento do feijoeiro irrigado, em sistema de plantio direto

The objective of this research was to study the effects of five different treatments of grass (Brachiaria decumbens) straw mulch on common beans (Phaseolus vulgaris L.): 0% (0 t.ha-1), 25% (2,25 t.ha-1), 50% (4,5 t.ha-1), 75% (6,75 t. ha-1) and 100% (9,0 t/ha) designed by randomized blocks, with four replicates. The irrigation was applied when minimum soil water potential were reached about - 30kPa. The water management based on tensiometers and soil water characteristic curve. A microsprinkler irrigation system was used. The experiment was set up at the Experimental Station of Embrapa Rice and Bean (Empresa Brasileira de Pesquisa Agropecuária Arroz e Feijão) at Santo Antonio de Goiás, Brazil, in a Dark - Red Latosol soil. The results showed: the bean yield and his components were not affected by treatments, except grain number/pod,. The mulch increased the water use efficiency and, consequently, decreased the number of irrigations when the mulch reached more than 50% straw mulch. The treatment with 100% of mulching presented the largest leaf area index and dry matter accumulation was not affected by mulching.

Acúmulo de sacarose, produtividade e florescimento de cana-de-açúcar sob reguladores vegetais

Plant regulators have been used successfully for early ripening and flowering control in sugarcane (Saccharum spp. Hybrid). However, little information is available about the interactions between new genotypes and two plant regulators with regard to those variables. This study determined the effect of the regulators on the sucrose content, stalk production and flowering of seven sugarcane genotypes. The experiment was installed in March 2004 near Ja-, SP, Brazil A randomized complete block design was used with four blocks with a split plot treatment arrangement where the main plots were the genotypes IAC87-3396, IAC87-3410, IAC89-3124, IAC91-2195, 1AC91-5155, P088-62 and SP80-1842 and the subplots were sulfomethuron-methyl (15g i.a.·ha -1), etefon (480g i.a.·ha-1) and unsprayed control. Pol in cane was evaluated at 0, 21, 42, 63, 84, 105 and 126 days after the plant regulators application (DAA). Flowering, pith, stalk production and sucrose content were evaluated at 126 DAA. In most of the genotypes the use of plant regulators anticipated maturation in 21 days when compared with the unsprayed control. Etefon was more efficient for harvesting sugarcane between 42-84 DAA, whereas sulfomethuron-methyl was between 105 and 126 DDA. Both products controlled flowering. For most genotypes, the ripeners did not affect the productivity of stalks, except for sulfomethuron-methyl that reduced it in SP80-1842, and for ethephon that increased it in IAC91-2195. Sugar productivity of IAC89-3124 increased with both regulators, while it was higher in IAC91-2195 with ethephon application and lower in SP80-1842 with sulfomethuron-methyl use.

Compactação do solo e intervalo hídrico ótimo no crescimento da parte aérea e produtividade da cultura do milho

The aim of this work was to evaluate the effect of soil compaction caused by tractor wheel traffic on the limiting water range (LLWR), shoot growth and levels of compaction and four replications in a completely randomized experimental design. Soil samples with preserved structure were collected in the layers: 0.02-0.05; 0.08-0.11; 0.15-0.18 and 0.22-0.25m to determine macroporosity, microporosity, total porosity, bulk density, resistance to penetration and LLWR. The evaluated corn parameters were: plant and first spike height, steam diameter, number of spikes per plant, plant dry matter, dry matter of 1000 seeds and seed productivity. The soil compaction restricted all corn parameters except the number of spikes per plant and dry matter of 1000 seeds. The LLWR was reduced by the soil resistance to penetration, even in the tilled soil with bulk density of 1.12 Mg m-3. Only the treatment with 11 Mg tractor, repeated four times on the area, demonstrated bulk density above critical bulk density in the LLWR that was 1.37 Mg m-3, where the seed productivity was significantly smaller.

Nitrogênio em cobertura e molibdênio via foliar em feijoeiro de inverno no sistema plantio direto II - Características agronômicas e produtividade

Nitrogen is the nutrient most uptaken by common bean plant, and molybdenum besides its importance to N fixation process, it is associated to N metabolism. The objective of this work was to evaluate, on common bean crop Pérola cultivar, the effect of N levels application at side dressing (0, 30, 60, 90 and 120 kg ha-1) as well as the leaf application of Mo (0, 80 and 160 g ha-1) at development stadium V3 or V4 under no tillage system. The experimental design was the randomized blocks with 30 treatments and 4 replications. The research was conducted in Selviria-MS on soil previously cropped with corn. The application of nitrogen levels at side dressing provided increasing on dry mass weight, number of pod and seeds per plant and grain yield, in the 2004; the Mo application at V3 or V4 stadia did not effect the production components and grain yield; as well as different doses of Mo depended on the N application at side dressing, in the 2004.

Infuěncia do relevo na produtividade e custos do harvester

Among the several variables that influence timber harvesting is the slope, which influences the productivity of forest machines. In this experiment the harvester was evaluated technically and economically while cutting and processing eucalyptus activity on different slope classes. The technical analysis included a study of time and movements by the method of continuous time; productivity was determined by the volume in cubic meters of wood processing. The economic analysis included the parameters of operational cost, production cost and energy consumption. The analysis of the data showed that productivity decreased according to the increase of the percent slope inclination, resulting in an effective work hour productivity increase from 18.72 to 39.71 m 3sc, with a mean of operating cost of US$ 78.78 per work hour.

Fungigação no controle do mofo branco e produtividade do feijoeiro em condições de cerrado brasileiro

The aim of this research was to evaluate the white mold severity (Sclerotinia sclerotiorum (Lib.) of Bary), bean production components and yield (Phaseolus vulgaris L.), variety Perola, according to the application of procimidone fungicide (Sialex 500), through fungigation (center pivot) and automotive sprayer (Uniport). The study was carried under field production commercial conditions, in Primavera do Leste - MT - Brazil. The experiment consisted of 5 treatments (with 4 repetitions of 4 ha each), all with two procimidone applications (1.2 kg ha-1 each application, same as, 0.6 kg a.i. per hectare) to the 42 and 52 days after seeding. The water depths of 5.5 and 11.0 mm were tested in the application through central pivot (this had your checked uniformity), providing volumes of 55.000 and 110.000 L ha-1, respectively, and the volumes of 120 and 200 L ha-1 in the automotive sprayer. The severity of disease was evaluated by the percentage of the area affected by plant damage using diagramatic grade scale of white mold severity, as described by Azevedo (1998). The values were used to calculate the area under the disease progress curve (AUDPC). They were also analyzed, the number of the fungus apothecia during the crop cycle and the residual sclerotias weight in harvest. On this occasion, it was also evaluated the crop yield parameters: number of plants per plot (final stand), pods per plant, grains per pod, medium weight of 200 grains and productivity of grains. The AUDPC values, apothecia to 42, 49 and 56 days after seeding, sclerotias in 2 soil kg and the crop productivity parameters were submitted to the variance analysis and Tukey Test at 0.05 of probability. This test was also applied in the comparison among the different fungicide application methods, independent of spray volumes in each one. The statistical processing was accomplished by STAT program. The results showed that weren't differences among application techniques studied in relation to productivity parameters, however, best white mold control, smaller apothecia number to 49 and 56 days after seeding and smaller weight of residual sclerotias in the harvest were obtained with the fungigation, independently of the spray volume used.