Evaluation of fruit and vegetable intakes of Australian adults: the nutrition survey 1995

Objective: To evaluate the fruit and vegetable intakes of Australian adults aged 19-64 years. Methods: Intake data were collected as part of the National Nutrition Survey 1995 representing all Australian States and Territories, including city, metropolitan, rural and remote areas. Dietary intake of 8,891 19-to-64 year-olds was assessed using a structured 24-hour recall. Intake frequency was assessed as the proportion of participants consuming fruit and vegetables on the day prior to interview and variety was assessed as the number of subgroups of fruit and vegetables consumed. Intake levels were compared with the recommendations of the Australian Guide to Healthy Eating (AGHE). Results: Sixty-two per cent of participants consumed some fruit and 89% consumed some vegetables on the day surveyed. Males were less likely to consume fruit and younger adults less likely to consume fruit and vegetables compared with females and older adults respectively. Variety was primarily low (1 subcategory) for fruit and medium (3-4 subcategories) for vegetables. Thirty-two per cent of adults consumed the minimum two serves of fruit and 30% consumed the minimum five serves of vegetables as recommended by the AGHE. Eleven per cent of adults met the minimum recommendations for both fruit and vegetables. Conclusion: A large proportion of adults have fruit and vegetable intakes below the AGHE minimum recommendations. Implications: A nationally integrated, longterm campaign to increase fruit and vegetable consumption, supported by policy changes to address structural barriers to consumption, is vital to improve fruit and vegetable consumption among adults

Trends in Australian contact lens prescribing during the first decade of the 21st Century (2000–2009)

Purpose: The aim was to document contact lens prescribing trends in Australia between 2000 and 2009. ---------- Methods: A survey of contact lens prescribing trends was conducted each year between 2000 and 2009. Australian optometrists were asked to provide information relating to 10 consecutive contact lens fittings between January and March each year. ---------- Results: Over the 10-year survey period, 1,462 practitioners returned survey forms representing a total of 13,721 contact lens fittings. The mean age (± SD) of lens wearers was 33.2 ± 13.6 years and 65 per cent were female. Between 2006 and 2009, rigid lens new fittings decreased from 18 to one per cent. Low water content lenses reduced from 11.5 to 3.2 per cent of soft lens fittings between 2000 and 2008. Between 2005 and 2009, toric lenses and multifocal lenses represented 26 and eight per cent, respectively, of all soft lenses fitted. Daily disposable, one- to two-week replacement and monthly replacement lenses accounted for 11.6, 30.0 and 46.5 per cent of all soft lens fittings over the survey period, respectively. The proportion of new soft fittings and refittings prescribed as extended wear has generally declined throughout the past decade. Multi-purpose lens care solutions dominate the market. Rigid lenses and monthly replacement soft lenses are predominantly worn on a full-time basis, whereas daily disposable soft lenses are mainly worn part-time.---------- Conclusions: This survey indicates that technological advances, such as the development of new lens materials, manufacturing methods and lens designs, and the availability of various lens replacement options, have had a significant impact on the contact lens market during the first decade of the 21st Century.

The application of neural networks to induction machine control

Neural networks (NNs) are discussed in connection with their possible use in induction machine drives. The mathematical model of the NN as well as a commonly used learning algorithm is presented. Possible applications of NNs to induction machine control are discussed. A simulation of an NN successfully identifying the nonlinear multivariable model of an induction-machine stator transfer function is presented. Previously published applications are discussed, and some possible future applications are proposed.

A vision of the past : The Mill Albion

This paper examines The Mill Albion community history project, a diverse, multi-layered public history/art program that captures the social heritage of The Albion Flour Mill, as told through images produced as part of a research consultancy undertaken by QUT for FKP Property Group. The Albion Flour Mill was built in 1930 and continued operations for more than 72 years. After ceasing operation in 2005 the site was left to deteriorate. The FKP Property Group purchased the land to undertake a new urban redevelopment project. This paper reflects on the project and showcases some of the culturally creative ways this community’s history was told, using images.

Assessing wet crashes for the skid resistance management of road assets

Australia, road crash trauma costs the nation A$15 billion annually whilst the US estimates an economic impact of around US$ 230 billion on its network. Worldwide economic cost of road crashes is estimated to be around US$ 518 billion each year. Road accidents occur due to a number of factors including driver behaviour, geometric alignment, vehicle characteristics, environmental impacts, and the type and condition of the road surfacing. Skid resistance is considered one of the most important road surface characteristics because it has a direct effect on traffic safety. In 2005, Austroads (the Association of Australian and New Zealand Road Transport and Traffic Authorities) published a guideline for the management of skid resistance and Queensland Department of Main Roads (QDMR) developed a skid resistance management plan (SRMP). The current QDMR strategy is based on rationale analytical methodology supported by field inspection with related asset management decision tools. The Austroads’s guideline and QDMR's skid resistance management plan have prompted QDMR to review its skid resistance management practice. As a result, a joint research project involving QDMR, Queensland University of Technology (QUT) and the Corporative Research Centre for Integrated Engineering Asset Management (CRC CIEAM) was formed. The research project aims at investigating whether there is significant relationship between road crashes and skid resistance on Queensland’s road networks. If there is, the current skid resistance management practice of QDMR will be reviewed and appropriate skid resistance investigatory levels will be recommended. This paper presents analysis results in assessing the relationship between wet crashes and skid resistance on Queensland roads. Attributes considered in the analysis include surface types, annual average daily traffic (AADT), speed and seal age.

Minimising transport disadvantage to support knowledge city formation : applying the capability approach to select indicators

Purpose–The aims of this paper are to demonstrate the application of Sen’s theory of well-being, the capability approach; to conceptualise the state of transportation disadvantage; and to underpin a theoretical sounds indicator selection process. Design/methodology/approach–This paper reviews and examines various measurement approaches of transportation disadvantage in order to select indicators and develop an innovative framework of urban transportation disadvantage. Originality/value–The paper provides further understanding of the state of transportation disadvantage from the capability approach perspective. In addition, building from this understanding, a validated and systematic framework is developed to select relevant indicators. Practical implications –The multi-indicator approach has a high tendency to double count for transportation disadvantage, increase the number of TDA population and only accounts each indicator for its individual effects. Instead, indicators that are identified based on a transportation disadvantage scenario will yield more accurate results. Keywords – transport disadvantage, the capability approach, accessibility, measuring urban transportation disadvantage, indicators selection Paper type – Academic Research Paper

Towards a unified method for the knowledge based urban development framework

Purpose–The growing debate in the literature indicates that the initiative to implement Knowledge Based Urban Development (KBUD) approaches in urban development process is neither simple nor quick. Many research efforts has therefore, been put forward to the development of appropriate KBUD framework and KBUD practical approaches. But this has lead to a fragmented and incoherent methodological approach. This paper outlines and compares a few most popular KBUD frameworks selected from the literature. It aims to identify some key and common features in the effort to achieve a unified method of KBUD framework. Design/methodology/approach–This paper reviews, examines and identifies various popular KBUD frameworks discussed in the literature from urban planners’ viewpoint. It employs a content analysis technique i.e. a research tool used to determine the presence of certain words or concepts within texts or sets of texts. Originality/value–The paper reports on the key and common features of a few selected most popular KBUD frameworks. The synthesis of the results is based from a perspective of urban planners. The findings which encompass a new KBUD framework incorporating the key and common features will be valuable in setting a platform to achieve a unified method of KBUD. Practical implications –The discussion and results presented in this paper should be significant to researchers and practitioners and to any cities and countries that are aiming for KBUD. Keywords – Knowledge based urban development, Knowledge based urban development framework, Urban development and knowledge economy

The effects of muscle fatigue on knee function during landing

The human knee acts as a sophisticated shock absorber during landing movements. The ability of the knee to perform this function in the real world is remarkable given that the context of the landing movement may vary widely between performances. For this reason, humans must be capable of rapidly adjusting the mechanical properties of the knee under impact load in order to satisfy many competing demands. However, the processes involved in regulating these properties in response to changing constraints remain poorly understood. In particular, the effects of muscle fatigue on knee function during step landing are yet to be fully explored. Fatigue of the knee muscles is significant for 2 reasons. First, it is thought to have detrimental effects on the ability of the knee to act as a shock absorber and is considered a risk factor for knee injury. Second, fatigue of knee muscles provides a unique opportunity to examine the mechanisms by which healthy individuals alter knee function. A review of the literature revealed that the effect of fatigue on knee function during landing has been assessed by comparing pre and postfatigue measurements, with fatigue induced by a voluntary exercise protocol. The information is limited by inconsistent results with key measures, such as knee stiffness, showing varying results following fatigue, including increased stiffness, decreased stiffness or failure to detect any change in some experiments. Further consideration of the literature questions the validity of the models used to induce and measure fatigue, as well as the pre-post study design, which may explain the lack of consensus in the results. These limitations cast doubt on the usefulness of the available information and identify a need to investigate alternative approaches. Based on the results of this review, the aims of this thesis were to: • evaluate the methodological procedures used in validation of a fatigue model • investigate the adaptation and regulation of post-impact knee mechanics during repeated step landings • use this new information to test the effects of fatigue on knee function during a step-landing task. To address the aims of the thesis, 3 related experiments were conducted that collected kinetic, kinematic and electromyographic data from 3 separate samples of healthy male participants. The methodologies involved optoelectronic motion capture (VICON), isokinetic dynamometry (System3 Pro, BIODEX) and wireless surface electromyography (Zerowire, Aurion, Italy). Fatigue indicators and knee function measures used in each experiment were derived from the data. Study 1 compared the validity and reliability of repetitive stepping and isokinetic contractions with respect to fatigue of the quadriceps and hamstrings. Fifteen participants performed 50 repetitions of each exercise twice in randomised order, over 4 sessions. Sessions were separated by a minimum of 1 week’s rest, to ensure full recovery. Validity and reliability depended on a complex interaction between the exercise protocol, the fatigue indicator, the individual and the muscle of interest. Nevertheless, differences between exercise protocols indicated that stepping was less effective in eliciting valid and reliable changes in peak power and spectral compression, compared with isokinetic exercise. A key finding was that fatigue progressed in a biphasic pattern during both exercises. The point separating the 2 phases, known as the transition point, demonstrated superior between-test reliability during the isokinetic protocol, compared with stepping. However, a correction factor should be used to accurately apply this technique to the study of fatigue during landing. Study 2 examined alterations in knee function during repeated landings, with a different sample (N =12) performing 60 consecutive step landing trials. Each landing trial was separated by 1-minute rest periods. The results provided new information in relation to the pre-post study design in the context of detecting adjustments in knee function during landing. First, participants significantly increased or decreased pre-impact muscle activity or post-impact mechanics despite environmental and task constraints remaining unchanged. This is the 1st study to demonstrate this effect in healthy individuals without external feedback on performance. Second, single-subject analysis was more effective in detecting alterations in knee function compared to group-level analysis. Finally, repeated landing trials did not reduce inter-trial variability of knee function in some participants, contrary to assumptions underpinning previous studies. The results of studies 1 and 2 were used to modify the design of Study 3 relative to previous research. These alterations included a modified isokinetic fatigue protocol, multiple pre-fatigue measurements and singlesubject analysis to detect fatigue-related changes in knee function. The study design incorporated new analytical approaches to investigate fatiguerelated alterations in knee function during landing. Participants (N = 16) were measured during multiple pre-fatigue baseline trial blocks prior to the fatigue model. A final block of landing trials was recorded once the participant met the operational fatigue definition that was identified in Study 1. The analysis revealed that the effects of fatigue in this context are heavily dependent on the compensatory response of the individual. A continuum of responses was observed within the sample for each knee function measure. Overall, preimpact preparation and post-impact mechanics of the knee were altered with highly individualised patterns. Moreover, participants used a range of active or passive pre-impact strategies to adapt post-impact mechanics in response to quadriceps fatigue. The unique patterns identified in the data represented an optimisation of knee function based on priorities of the individual. The findings of these studies explain the lack of consensus within the literature regarding the effects of fatigue on knee function during landing. First, functional fatigue protocols lack validity in inducing fatigue-related changes in mechanical output and spectral compression of surface electromyography (sEMG) signals, compared with isokinetic exercise. Second, fatigue-related changes in knee function during landing are confounded by inter-individual variation, which limits the sensitivity of group-level analysis. By addressing these limitations, the 3rd study demonstrated the efficacies of new experimental and analytical approaches to observe fatigue-related alterations in knee function during landing. Consequently, this thesis provides new perspectives into the effects of fatigue in knee function during landing. In conclusion: • The effects of fatigue on knee function during landing depend on the response of the individual, with considerable variation present between study participants, despite similar physical characteristics. • In healthy males, adaptation of pre-impact muscle activity and postimpact knee mechanics is unique to the individual and reflects their own optimisation of demands such as energy expenditure, joint stability, sensory information and loading of knee structures. • The results of these studies should guide future exploration of adaptations in knee function to fatigue. However, research in this area should continue with reduced emphasis on the directional response of the population and a greater focus on individual adaptations of knee function.

Preface [From The Third Knowledge City World Summit 2010 proceedings]

‘Knowledge’ is a resource, which relies on the past for a better future. In the 21st century, more than ever before, cities around the world depend on the knowledge of their citizens, their institutions and their firms and enterprises. The knowledge image, the human competence and the reputation of their public and private institutions and corporations profiles a city. It attracts investment, qualified labour and professionals, as well as students and researchers. And it creates local life spaces and professional milieus, which offer the quality of life to the citizens that are seeking to cope with the challenges of modern life in a competitive world. Integrating knowledge-based development in urban strategies and policies, beyond the provision of schools and locations for higher education, has become a new ambitious arena of city politics. Coming from theory to practice, and bringing together the manifold knowledge stakeholders in a city and preparing joint visions for the knowledge city is a new challenge for city managers, urban planners and leaders of the civic society . It requires visionary power, creativity, holistic thinking, the willingness to cooperate with all groups of the local civil society, and the capability to moderate communication processes to overcome conflicts and to develop joint action for a sustainable future.

A survey of the use of grading scales for contact lens complications in optometric practice

Purpose:  The aim of this study was to investigate the extent and pattern of use of grading scales for contact lens complications (‘grading scales’) in optometric practice. Methods:  An anonymous postal survey was sent to all 756 members of the Queensland Division of Optometrists Association Australia. Information was elicited relating to level of experience, practice type and location, and mode of usage of grading scales. Results:  Survey forms were returned by 237 optometrists, representing a 31 per cent response rate. The majority of respondents (61 per cent) reported using grading scales frequently in practice, while 65 per cent of these preferred to use the Efron Grading Scales for Contact Lens Complications. Seventy-six per cent of optometrists use a method of incremental grading rather than simply grading with whole numbers. Grading scales are more likely to be used by optometrists who have recently graduated (p < 0.001), have a postgraduate certificate in ocular therapeutics (p = 0.018), see more contact lens patients (p = 0.027) and use other forms of grading scales (p < 0.001). The most frequently graded ocular conditions were corneal staining, papillary conjunctivitis and conjunctival redness. The main reasons for not using grading scales included a preference for sketches, photographs or descriptions (87 per cent) and unavailability of scales (29 per cent). Conclusion:  Grading scales for contact lens complications are used extensively in optometric practice for a variety of purposes. This tool can now be considered as an expected norm in contact lens practice. We advocate the incorporation of such grading scales into professional guidelines and standards for good optometric clinical practice.

Land Contracts in Queensland [3rd ed]

Land Contracts in Queensland provides a thorough, user-friendly account of the law relating to buying and selling freehold land in Queensland. The authors analyse the substance of the transaction through the medium of standard contracts, and draw on a comprehensive range of court decisions relating to the area. There are chapters covering the role of the real estate agent, the disclosure regime for sellers and agents, the inclusion of special conditions, and stamp duty and GST implications.

Re-imagining static Utopias : unraveling the bat/human problem

The making of the modern world has long been fuelled by utopian images that are blind to ecological reality. Botanical gardens are but one example – who typically portray themselves as miniature, isolated 'edens on earth'. Whilst respected, heritage-laden institutions such as the Royal Botanical Gardens in Sydney, Australia promote such an idealised image they are now self-evidently also the vital ‘lungs’ of a crowded city as well as a critical habitats for threatened biodiversity (in this case notably flying foxes). In 2010 the 'Remnant Emergency Artlab' set out to alleviate this utopian hangover through a creative provocation called the 'Botanical Gardens ‘X-Tension’ - an imagined city-wide, distributed, network of 'ecological gardens' - in order to ask, what now needs to be better understood, connected and therefore ultimately conserved?

Raising the stakes : the challenges for teacher assessment

These are changing times for teachers and their students in Australia with the introduction of a national curriculum and standards driven reform. While countries in Europe such as England, and in Asia such as Singapore, are changing policy to make more use of assessment to support and improve learning it appears that we in Australia are moving towards creating policy that will raise the assessment stakes for the alleged purposes of transparency, accountability and fairness. What can be learnt from countries that have had years of high stakes testing? How can Australia avoid the mistakes of past curriculum and assessment reform efforts? And how can Australian teachers build their capacity to maximise their use of the learning power of assessment? These are key questions that will be addressed in this presentation with reference to innovative research from global networks that have maintained the assessment focus on learning.

An analysis of the nature and effectiveness of corporate governance in smaller listed Australian companies

The objective of this thesis is to investigate the corporate governance attributes of smaller listed Australian firms. This study is motivated by evidence that these firms are associated with more regulatory concerns, the introduction of ASX Corporate Governance Recommendations in 2004, and a paucity of research to guide regulators and stakeholders of smaller firms. While there is an extensive body of literature examining the effectiveness of corporate governance, the literature principally focuses on larger companies, resulting in a deficiency in the understanding of the nature and effectiveness of corporate governance in smaller firms. Based on a review of agency theory literature, a theoretical model is developed that posits that agency costs are mitigated by internal governance mechanisms and transparency. The model includes external governance factors but in many smaller firms these factors are potentially absent, increasing the reliance on the internal governance mechanisms of the firm. Based on the model, the observed greater regulatory intervention in smaller companies may be due to sub-optimal internal governance practices. Accordingly, this study addresses four broad research questions (RQs). First, what is the extent and nature of the ASX Recommendations that have been adopted by smaller firms (RQ1)? Second, what firm characteristics explain differences in the recommendations adopted by smaller listed firms (RQ2), and third, what firm characteristics explain changes in the governance of smaller firms over time (RQ3)? Fourth, how effective are the corporate governance attributes of smaller firms (RQ4)? Six hypotheses are developed to address the RQs. The first two hypotheses explore the extent and nature of corporate governance, while the remaining hypotheses evaluate its effectiveness. A time-series, cross-sectional approach is used to evaluate the effectiveness of governance. Three models, based on individual governance attributes, an index of six items derived from the literature, and an index based on the full list of ASX Recommendations, are developed and tested using a sample of 298 smaller firms with annual observations over a five-year period (2002-2006) before and after the introduction of the ASX Recommendations in 2004. With respect to (RQ1) the results reveal that the overall adoption of the recommendations increased from 66 per cent in 2004 to 74 per cent in 2006. Interestingly, the adoption rate for recommendations regarding the structure of the board and formation of committees is significantly lower than the rates for other categories of recommendations. With respect to (RQ2) the results reveal that variations in rates of adoption are explained by key firm differences including, firm size, profitability, board size, audit quality, and ownership dispersion, while the results for (RQ3) were inconclusive. With respect to (RQ4), the results provide support for the association between better governance and superior accounting-based performance. In particular, the results highlight the importance of the independence of both the board and audit committee chairs, and of greater accounting-based expertise on the audit committee. In contrast, while there is little evidence that a majority independent board is associated with superior outcomes, there is evidence linking board independence with adverse audit opinion outcomes. These results suggest that board and chair independence are substitutes; in the presence of an independent chair a majority independent board may be an unnecessary and costly investment for smaller firms. The findings make several important contributions. First, the findings contribute to the literature by providing evidence on the extent, nature and effectiveness of governance in smaller firms. The findings also contribute to the policy debate regarding future development of Australia’s corporate governance code. The findings regarding board and chair independence, and audit committee characteristics, suggest that policy-makers could consider providing additional guidance for smaller companies. In general, the findings offer support for the “if not, why not?” approach of the ASX, rather than a prescriptive rules-based approach.