Sample size and statistical power in the hierarchical analysis of variance: applications in morphometry of the nervous system.

Analysis of variance is commonly used in morphometry in order to ascertain differences in parameters between several populations. Failure to detect significant differences between populations (type II error) may be due to suboptimal sampling and lead to erroneous conclusions; the concept of statistical power allows one to avoid such failures by means of an adequate sampling. Several examples are given in the morphometry of the nervous system, showing the use of the power of a hierarchical analysis of variance test for the choice of appropriate sample and subsample sizes. In the first case chosen, neuronal densities in the human visual cortex, we find the number of observations to be of little effect. For dendritic spine densities in the visual cortex of mice and humans, the effect is somewhat larger. A substantial effect is shown in our last example, dendritic segmental lengths in monkey lateral geniculate nucleus. It is in the nature of the hierarchical model that sample size is always more important than subsample size. The relative weight to be attributed to subsample size thus depends on the relative magnitude of the between observations variance compared to the between individuals variance.

How useful is satellite positioning system (GPS) to track gait parameters? A review.

Over the last century, numerous techniques have been developed to analyze the movement of humans while walking and running. The combined use of kinematics and kinetics methods, mainly based on high speed video analysis and forceplate, have permitted a comprehensive description of locomotion process in terms of energetics and biomechanics. While the different phases of a single gait cycle are well understood, there is an increasing interest to know how the neuro-motor system controls gait form stride to stride. Indeed, it was observed that neurodegenerative diseases and aging could impact gait stability and gait parameters steadiness. From both clinical and fundamental research perspectives, there is therefore a need to develop techniques to accurately track gait parameters stride-by-stride over a long period with minimal constraints to patients. In this context, high accuracy satellite positioning can provide an alternative tool to monitor outdoor walking. Indeed, the high-end GPS receivers provide centimeter accuracy positioning with 5-20 Hz sampling rate: this allows the stride-by-stride assessment of a number of basic gait parameters--such as walking speed, step length and step frequency--that can be tracked over several thousand consecutive strides in free-living conditions. Furthermore, long-range correlations and fractal-like pattern was observed in those time series. As compared to other classical methods, GPS seems a promising technology in the field of gait variability analysis. However, relative high complexity and expensiveness--combined with a usability which requires further improvement--remain obstacles to the full development of the GPS technology in human applications.

Automation in clinical bacteriology: what system to choose?

With increased activity and reduced financial and human resources, there is a need for automation in clinical bacteriology. Initial processing of clinical samples includes repetitive and fastidious steps. These tasks are suitable for automation, and several instruments are now available on the market, including the WASP (Copan), Previ-Isola (BioMerieux), Innova (Becton-Dickinson) and Inoqula (KIESTRA) systems. These new instruments allow efficient and accurate inoculation of samples, including four main steps: (i) selecting the appropriate Petri dish; (ii) inoculating the sample; (iii) spreading the inoculum on agar plates to obtain, upon incubation, well-separated bacterial colonies; and (iv) accurate labelling and sorting of each inoculated media. The challenge for clinical bacteriologists is to determine what is the ideal automated system for their own laboratory. Indeed, different solutions will be preferred, according to the number and variety of samples, and to the types of sample that will be processed with the automated system. The final choice is troublesome, because audits proposed by industrials risk being biased towards the solution proposed by their company, and because these automated systems may not be easily tested on site prior to the final decision, owing to the complexity of computer connections between the laboratory information system and the instrument. This article thus summarizes the main parameters that need to be taken into account for choosing the optimal system, and provides some clues to help clinical bacteriologists to make their choice.

Molecular evolution of the Drosophila olfactory system

The olfactory system is an attractive model to study the genetic mechanisms underlying evolution of the nervous system. This sensory system mediates the detection and behavioural responses to an enormous diversity of volatile chemicals in the environment and displays rapid evolution, as species acquire, modify and discard olfactory receptors and circuits to adapt to new olfactory stimuli. Drosophilids provide an attractive model to study these processes. The availability of 12 sequenced genomes of Drosophila species occupying diverse ecological niches provides a rich resource for genomic analyses. Moreover, one of these species, Drosophila melanogaster, is amenable to a powerful combination of genetic and electrophysiological analyses. D. melanogaster has two distinct families of olfactory receptors to detect odours, the well-characterised Odorant Receptors (ORs) and the recently identified lonotropic Receptors (IRs). In my thesis, I have provided new insights into the genetic mechanisms underlying olfactory system evolution through three distinct, but interrelated projects. First, I performed a comparative genomic analysis of the IR repertoire in 12 sequenced Drosophila species, which has revealed that the olfactory IRs are highly conserved across species. By contrast, a large fraction of IRs that are not expressed in the olfactory system - and which may be gustatory receptors - are much more variable in sequence and gene copy number. Second, to identify ligands for IR expressing olfactory sensory neurons, I have performed an electrophysiological screen in D. melanogaster using a panel of over 160 odours. I found that the IRs respond to a number of amines, aldehydes and acids, contrasting with the chemical specificity of the OR repertoire, which is mainly tuned to esters, alcohols and ketones. Finally, the identification of ligands for IRs in this species allowed me to investigate in detail the molecular and functional evolution of a tandem array of IRs, IR75a/IR75b/IR75c, in D. sechellia. This species is endemic to the Seychelles archipelago and highly specialised to breed on the fruits of Morinda citrifolia, which is repulsive and toxic for other Drosophila species. These studies led me to discover that receptor loss, changes in receptor specificity and changes in receptor expression have likely played an important role during the evolution of these IRs in D. sechellia. These changes may explain, in part, the unique chemical ecology of this species. - Le système olfactif est un excellent modèle pour étudier les mécanismes génétiques impliqués dans l'étude de l'évolution du système nerveux. Ce système sensoriel permet la détection de nombreux composés volatils présents dans l'environnement et est à la base des réponses comportementales. Il est propre à chaque espèce et évolue rapidement en modifiant ou en éliminant des récepteurs et leurs circuits olfactifs correspondants pour s'adapter à de nouvelles odeurs. Pour étudier le système olfactif et son évolution, nous avons décidé d'utiliser la drosophile comme modèle. Le séquençage complet de 12 souches de drosophiles habitant différentes niches écologiques permet une analyse génomique conséquente. De plus, l'une de ces espèces Drosophila melanogaster permet la combinaison d'analyses génétiques et électrophysiologiques. En effet, D. melanogaster possède 2 familles distinctes de récepteurs olfactifs qui permettent la détection d'odeurs: les récepteurs olfactifs (ORs) étant les mieux caractérisés et les récepteurs ionotropiques (IRs), plus récemment identifiés. Au cours de ma thèse, j'ai apporté des nouvelles connaissances qui m'ont permis de mieux comprendre les mécanismes génétiques à la base de l'évolution du système olfactif au travers de trois projets différents, mais interdépendants. Premièrement, j'ai réalisé une analyse génomique comparative de l'ensemble des IRs dans les 12 souches de drosophiles séquencées jusqu'à présent. Ceci a montré que les récepteurs olfactifs IRs sont hautement conservés parmi l'ensemble de ces espèces. Au contraire, une grande partie des IRs qui ne sont pas exprimés dans le système olfactif, et qui semblent être des récepteurs gustatifs, sont beaucoup plus variables dans leur séquence et dans le nombre de copie de gènes. Deuxièmement, pour identifier les ligands des récepteurs IRs exprimés par les neurones sensoriels olfactifs, j'ai réalisé une étude électrophysiologique chez D. melanogaster e η testant l'effet de plus de 160 composés chimiques sur les IRs. J'ai trouvé que les IRs répondent à un nombre d'amines, d'aldéhydes et d'acides, contrairement aux récepteurs olfactifs ORs qui eux répondent principalement aux esthers, alcools et cétones. Finalement, l'identification de ligands pour les IRs dans ces espèces m'a permis d'étudier en détail l'évolution fonctionnelle et moléculaire des IR75a/IR75b/IR75c dans D. sechellia. Cette espèce est endémique de l'archipel des Seychelles et se nourrit spécifiquement du fruit Morinda citrifolia qui est répulsif et toxique pour d'autres souches de drosophiles. Ces études m'ont poussé à découvrir que, la perte de IR75a, le changement dans la spécificité de IR75b ainsi que le changement dans l'expression de IR75c ont probablement joué un rôle important dans l'évolution des IRs chez D. sechellia. Ces changements peuvent expliquer, en partie, l'écologie chimique propre à cette espèce. Résumé français large public Le système olfactif permet aux animaux de détecter des milliers de molécules odorantes, les aidant ainsi à trouver de la nourriture, à distinguer si elle est fraîche ou avariée, à trouver des partenaires sexuels, ainsi qu'à éviter les prédateurs. Selon l'environnement et le mode de vie des espèces, le système olfactif doit détecter des odeurs très diverses ; en effet, un moustique qui recherche du sang humain pour se nourrir doit détecter des odeurs bien différentes d'une abeille qui recherche des fleurs. Dans ma thèse, j'ai essayé de comprendre comment les systèmes olfactifs d'une espèce évoluent pour s'adapter aux exigences induites par son environnement. Un très bon modèle pour étudier cela est la drosophile dont les différentes espèces se nichent dans des habitats très divers. Pour ce faire, j'ai étudié les récepteurs olfactifs de différentes espèces de la drosophile. Ces récepteurs sont des protéines qui se lient à des odeurs spécifiques. Lorsqu'ils se lient, ils activent un neurone qui envoie un signal électrique au cerveau. Ce signal est ensuite traité par ce dernier qui indique à la mouche si l'odeur est attractive ou répulsive. J'ai identifié les récepteurs olfactifs de plusieurs espèces de drosophile et étudié s'il y avait des différences entre elles. La plupart des récepteurs sont similaires entre les espèces, cependant dans l'une d'entre elles, certains récepteurs sont différents. Ce fait est particulièrement intéressant car cette espèce de drosophile se nourrit de fruits que les autres espèces n'apprécient pas. Comme nous ne savons pas quels récepteurs se lient à quelles odeurs, j'ai testé un grand nombre de composants odorants. Ceci m'a permis de constater que, effectivement, certains changements produits dans ces récepteurs expliquent pourquoi cette espèce aime particulièrement ces fruits. En outre, mes résultats contribuent à mieux comprendre les changements génétiques qui sont impliqués dans l'évolution du système olfactif.

Prediction of 18-month survival in patients with primary myelodysplastic syndrome. A regression model and scoring system based on the combination of chromosome findings and the Bournemouth score.

The predictive potential of six selected factors was assessed in 72 patients with primary myelodysplastic syndrome using univariate and multivariate logistic regression analysis of survival at 18 months. Factors were age (above median of 69 years), dysplastic features in the three myeloid bone marrow cell lineages, presence of chromosome defects, all metaphases abnormal, double or complex chromosome defects (C23), and a Bournemouth score of 2, 3, or 4 (B234). In the multivariate approach, B234 and C23 proved to be significantly associated with a reduction in the survival probability. The similarity of the regression coefficients associated with these two factors means that they have about the same weight. Consequently, the model was simplified by counting the number of factors (0, 1, or 2) present in each patient, thus generating a scoring system called the Lausanne-Bournemouth score (LB score). The LB score combines the well-recognized and easy-to-use Bournemouth score (B score) with the chromosome defect complexity, C23 constituting an additional indicator of patient outcome. The predicted risk of death within 18 months calculated from the model is as follows: 7.1% (confidence interval: 1.7-24.8) for patients with an LB score of 0, 60.1% (44.7-73.8) for an LB score of 1, and 96.8% (84.5-99.4) for an LB score of 2. The scoring system presented here has several interesting features. The LB score may improve the predictive value of the B score, as it is able to recognize two prognostic groups in the intermediate risk category of patients with B scores of 2 or 3. It has also the ability to identify two distinct prognostic subclasses among RAEB and possibly CMML patients. In addition to its above-described usefulness in the prognostic evaluation, the LB score may bring new insights into the understanding of evolution patterns in MDS. We used the combination of the B score and chromosome complexity to define four classes which may be considered four possible states of myelodysplasia and which describe two distinct evolutional pathways.

Effluent particle removal by microirrigation system filters

The aim of this work was to determine whether the filters used in microirrigation systems can remove potentially emitter-clogging particles. The particle size and volume distributions of different effluents and their filtrates were established, and the efficiency of the removal of these particles and total suspended solids by screen, disc and sand filters determined. In most of the effluents and filtrates, the number of particles with a diameter > 20 μm was minimal. By analysing the particle volume distribution it was found that particles larger than the disc and screen filter pores appeared in the filtrates. However, the sand filter was able to retain particles larger than the pore size. The filtration efficiency depended more on the type of effluent than on the filter. It was also found that the particle size distribution followed a potential law. Analysis of the β exponents showed that the filters did not significantly modify the particle size distribution of the effluents

Status of Females in the Juvenile Justice System Iowa, 2009

Young women in the juvenile justice system present with characteristics and experiences that differentiate them from their male counterparts. As such, the juvenile justice system in Iowa must consider these factors if it is to effectively and efficiently impact recidivism, rehabilitation and public safety. Data reveal the following trends: All youth in the juvenile justice system experience a significantly higher rate of child maltreatment than do youth in the general population. Additionally, young women have a distinctly higher percentage of reported sexual abuse. Young women commit primarily non-violent offenses, with shoplifting and running away being the only two areas where they exceed young men in number. Young women are held in detention for a substantially higher percentage of misdemeanor versus felony offenses than young men. Young women of color, particularly African American females, are far more likely to come into contact with the juvenile justice system. Additionally, arrests of minority females have increased during the same time frame as arrests of Caucasian females have decreased. The general type of offense committed by young women is against public order (i.e. alcohol related violations, disorderly conduct) or property (i.e. shoplifting), though young women with subsequent charges of a violent nature are likely to have had violent offenses initially as well. Historically, young women have been a smaller segment of the juvenile justice population. They remain so today. Consequently, they are easy to overlook. But Iowa’s response to them is no less important. Perhaps, because they are fewer in number, our system can have a true and meaningful influence, with prevention of further penetration into both the juvenile and adult systems being the ultimate goal. The Iowa Task Force on Young Women recommends the following measures to facilitate movement toward that goal: 1. Facilities and programs striving to provide the most effective and efficient services to young women will opt for single gender environments with female responsive programming that includes components to address trauma. 2. All institutions and agencies that work with females involved in the juvenile justice system and which receive state funding should be required to provide annual female responsive training to their employees. Training should be research based, progressive, ongoing and result in an implementation plan. 3. As detention reform proceeds, gender and the disproportionate number of females in detention for misdemeanor offenses must be an integral part of policy and decision making discussions including any recommendations for solutions to be implemented. 4. As research, data and planning progresses related to disproportionate minority contact with the juvenile system, the needs of girls of color be given equal consideration. Specifically, assessment tools must be without race/ethnic bias and they must also be female responsive.

Study Regarding Implementation of a Uniform Statewide System to Allow for Electronic Transactions for the Registration and Titling of Motor Vehicles

LEGISLATIVE STUDY – The 83rd General Assembly of the Iowa Legislature, in Senate File 2273, directed the Iowa Department of Transportation (DOT) to conduct a study of how to implement a uniform statewide system to allow for electronic transactions for the registration and titling of motor vehicles. PARTICIPANTS IN STUDY – As directed by Senate File 2273, the DOT formed a working group to conduct the study that included representatives from the Consumer Protection Division of the Office of the Attorney General, the Department of Public Safety, the Department of Revenue, the Iowa State County Treasurer’s Association, the Iowa Automobile Dealers Association, and the Iowa Independent Automobile Dealers Association. CONDUCT OF THE STUDY – The working group met eight times between June 17, 2010, and October 1, 2010. The group discussed the costs and benefits of electronic titling from the perspectives of new and used motor vehicle dealers, county treasurers, the DOT, lending institutions, consumers and consumer protection, and law enforcement. Security concerns, legislative implications, and implementation timelines were also considered. In the course of the meetings the group: 1. Reviewed the specific goals of S.F. 2273, and viewed a demonstration of Iowa’s current vehicle registration and titling system so participants that were not users of the system could gain an understanding of its current functionality and capabilities. 2. Reviewed the results of a survey of county treasurers conducted by the DOT to determine the extent to which county treasurers had processing backlogs and the extent to which county treasurers limited the number of dealer registration and titling transactions that they would process in a single day and while the dealer waited. Only eight reported placing a limit on the number of dealer transactions that would be processed while the dealer waited (with the number ranging from one to four), and only 11 reported a backlog in processing registration and titling transactions as of June 11, 2010, with most backlogs being reported in the range of one to three days. 3. Conducted conference calls with representatives of the American Association of Motor Vehicle Administrators (AAMVA) and representatives of three states -- Kansas, which has an electronic lien and titling (ELT) program, and Wisconsin and Florida, each of which have both an ELT program and an electronic registration and titling (ERT) program – to assess current and best practices for electronic transactions. In addition, the DOT (through AAMVA) submitted a survey to all U.S. jurisdictions to determine how, if at all, other states implemented electronic transactions for the registration and titling of motor vehicles. Twenty-eight states responded to the survey; of the 28 states that responded, only 13 allowed liens to be added or released electronically, and only five indicated allowing applications for registration and titling to be submitted electronically. DOT staff also heard a presentation from South Dakota on its ERT system at an AAMVA regional meeting. ELT information that emerged suggests a multi-vendor approach, in which vendors that meet state specifications for participation are authorized to interface with the state’s system to serve as a portal between lenders and the state system, will facilitate electronic lien releases and additions by offering lenders more choices and the opportunity to use the same vendor in multiple states. The ERT information that emerged indicates a multi-interface approach that offers an interface with existing dealer management software (DMS) systems and through a separate internet site will facilitate ERT by offering access that meets a variety of business needs and models. In both instances, information that emerged indicates that, in the long-term, adoption rates are positively affected by making participation above a certain minimum threshold mandatory. 4. To assess and compare functions or services that might be offered by or through a vendor, the group heard presentations from vendors that offer products or services that facilitate some aspect of ELT or ERT. 5. To assess the concerns, needs and interest of Iowa motor vehicle dealers, the group surveyed dealers to assess registration and titling difficulties experienced by dealers, the types of DMS systems (if any) used by dealers, and the dealers’ interest and preference in using an electronic interface to submit applications for registration and titling. Overall, 40% of the dealers that responded indicated interest and 57% indicated no interest, but interest was pronounced among new car dealers (75% were interested) and dealers with a high number of monthly transactions (85% of dealers averaging more than 50 sales per month were interested). The majority of dealers responding to the dealer survey ranked delays in processing and problems with daily limits on transaction as ―minor difficulty or ―no difficulty. RECOMMENDATIONS -- At the conclusion of the meetings, the working group discussed possible approaches for implementation of electronic transactions in Iowa and reached a consensus that a phased implementation of electronic titling that addressed first electronic lien and title transactions (ELT) and electronic fund transfers (EFT), and then electronic applications for registration and titling (ERT) is recommended. The recommendation of a phased implementation is based upon recognition that aspects of ELT and EFT are foundational to ERT, and that ELT and EFT solutions are more readily and easily attained than the ERT solution, which will take longer and be somewhat more difficult to develop and will require federal approval of an electronic odometer statement to fully implement. ELT – A multi-vendor approach is proposed for ELT. No direct costs to the state, counties, consumers, or dealers are anticipated under this approach. The vendor charges participating lenders user or transaction fees for the service, and it appears the lenders typically absorb those costs due to the savings offered by ELT. Existing staff can complete the programming necessary to interface the state system with vendors’ systems. The estimated time to implement ELT is six to nine months. Mandatory participation is not recommended initially, but should be considered after ELT has been implemented and a suitable number of vendors have enrolled to provide a fair assessment of participation rates and opportunities. EFT – A previous attempt to implement ELT and EFT was terminated due to concern that it would negatively impact county revenues by reducing interest income earned on state funds collected by the county and held until the monthly transfer to the state. To avoid that problem in this implementation, the EFT solution should remain revenue neutral to the counties, by allowing fees submitted by EFT to be immediately directed to the proper county account. Because ARTS was designed and has the capacity to accommodate EFT, a vendor is not needed to implement EFT. The estimated time to implement EFT is six to nine months. It is expected that EFT development will overlap ELT development. ERT – ERT itself must be developed in phases. It will not be possible to quickly implement a fully functioning, paperless ERT system, because federal law requires that transfer of title be accompanied by a written odometer statement unless approval for an alternate electronic statement is granted by the National Highway Traffic Safety Administration (NHTSA). It is expected that it will take as much as a year or more to obtain NHTSA approval, and that NHTSA approval will require design of a system that requires the seller to electronically confirm the seller’s identity, make the required disclosure to the buyer, and then transfer the disclosure to the buyer, who must also electronically confirm the buyer’s identity and electronically review and accept the disclosure to complete and submit the transaction. Given the time that it will take to develop and gain approval for this solution, initial ERT implementation will focus on completing and submitting applications and issuing registration applied for cards electronically, with the understanding that this process will still require submission of paper documents until an electronic odometer solution is developed. Because continued submission of paper documents undermines the efficiencies sought, ―full‖ ERT – that is, all documents necessary for registration and titling should be capable of approval and/or acceptance by all parties, and should be capable of submission without transmittal or delivery of duplicate paper documents .– should remain the ultimate goal. ERT is not recommended as a means to eliminate review and approval of registration and titling transactions by the county treasurers, or to place registration and titling approval in the hands of the dealers, as county treasurers perform an important role in deterring fraud and promoting accuracy by determining the genuineness and regularity of each application. Authorizing dealers to act as registration agents that approve registration and title applications, issue registration receipts, and maintain and deliver permanent metal license plates is not recommended. Although distribution of permanent plates by dealers is not recommended, it is recommended that dealers participating in ERT generate and print registration applied for cards electronically. Unlike the manually-issued cards currently in use, cards issued in this fashion may be queried by law enforcement and are less susceptible to misuse by customers and dealers. The estimated time to implement the electronic application and registration applied for cards is 12 to 18 months, to begin after ELT and EFT have been implemented. It is recommended that focus during this time be on facilitating transfers through motor vehicle dealers, with initial deployment focused on higher-volume dealers that use DMS systems. In the long term an internet option for access to ERT must also be developed and maintained to allow participation for lower-volume dealers that do not use a DMS system. This option will also lay the ground work for an ERT option for sales between private individuals. Mandatory participation in Iowa is not recommended initially. As with ELT, it is recommended that mandatory participation be considered after at least an initial phase of ERT has been implemented and a suitable number of dealers have enrolled to provide a fair assessment of participation rates and opportunities. The use of vendors to facilitate ERT is not initially proposed because 1) DOT IT support staff is capable of developing a system that will interact with DMS systems and will still have to develop a dealer and public interface regardless of whether a vendor acts as intermediary between the DMS systems, and 2) there is concern that the cost of the vendor-based system, which is funded by transaction-based payments from the dealer to the vendor, will be passed to the consumer in the form of additional documentation or conveyance fees. However, the DOT recommends flexibility on this point, as development and pilot of the system may indicate that a multi-vendor approach similar to that recommended for ELT may increase the adoption rate by larger dealers and may ultimately decrease the user management to be exercised by DOT staff. If vendors are used in the process, additional legislation or administrative rules may be needed to control the fees that may be passed to the consumer. No direct cost to the DOT or county treasurers is expected, as the DOT expects that it may complete necessary programming with existing staff. Use of vendors to facilitate ERT transactions by dealers using DMS systems would result in transaction fees that may ultimately be passed to consumers. LEGISLATION – As a result of the changes implemented in 2004 under Senate File 2070, the only changes to Iowa statutes proposed are to section 321.69 of the Iowa Code, ―Damage disclosure statement,and section 321.71, ―Odometer requirements.‖ In each instance, authority to execute these statements by electronic means would be clarified by authorizing language similar to that used in section 321.20, subsections ―2‖ and ―3,‖ which allows for electronic applications and directs the department to ―adopt rules on the method for providing signatures for applications made by electronic means.‖ In these sections, the authorizing language might read as follows: Notwithstanding contrary provisions of this section, the department may develop and implement a program to allow for any statement required by this section to be made electronically. The department shall adopt rules on the method for providing signatures for statements made by electronic means. Some changes to DOT administrative rules will be useful but only to enable changes to work processes that would be desirable in the long term. Examples of long term work processes that would be enabled by rule changes include allowing for signatures created through electronic means and electronic odometer certifications. The DOT rules, as currently written, do not hinder the ability to proceed with ELT, EFT, and ERT.

Role of the REST/RE-1 system in beta-cell life, function and differentiation

SUMMARYDiabetes is characterized by insulin deficiency that results from the destruction of insulin-secreting pancreatic beta-cells (Type 1), or in part from beta-cell death and insulin secretion defects (Type 2). Therefore, understanding the mechanisms of beta cell neogenesis (to generate unlimited supply of beta cells for T1D transplantation] or identifying the specific genes that favors insulin secretion or beta-cell survival is of great importance for the management of diabetes. The transcriptional repressor RE-1 Silencing Transcription Factor (REST) restricts the expression of a large number of genes containing its binding element, called Repressor Element-1 (RE-1), to neurons and beta cells. To do so, REST is ubiquitously expressed but in neurons and beta cells. To identify these essential genes and their functional significance in beta cells, we have generated transgenic mice that express REST specifically in beta cells under the control of the rat insulin promoter (RIP-REST mice). This resulted in the repression of the RE-1- containing genes in beta cells, and we analyzed the consequences.We first showed that RIP-REST mice were glucose-intolerant because of a defective insulin secretion. To explain this defect, we identified that a subset of the REST target genes were necessary for insulin exocytosis, such as Snap25, Synaptotagmin (Syt) IX, Complexin II, and Ica512, and we further demonstrated that among the identified REST targets, Syt IV and VII were also involved in insulin release. We next analyzed a novel RIP-REST mouse line that featured diabetes and we showed that this defect was due to a major loss of beta-cell mass. To explain this phenotype, we identified REST target genes that were involved in beta-cell survival, such as Ibl, Irs2, Ica512 and Connexin36, and revealed that another REST target, Cdk5r2 is also involved in beta-cell protection. In a third part, we finally suggest that REST may be important for pancreatic endocrine differentiation, since transgenic mice expressing constitutive REST in pancreatic multipotent progenitors show impaired formation of Ngn3-expressing endocrine- committed precursors, and impaired formation of differentiated endocrine cells. Mapping the pattern of REST expression in wild type animals indicates that it is expressed in multipotent progenitors to become then excluded from endocrine cells. Preliminary results suggest that a downregulation of REST would result in relieved expression of at least the Mytl target, favoring subsequent acquisition of the endocrine competence by endocrine precursor cells.Thus, we propose that the REST/RE-1 system is an important feature for beta-cell neogenesis, function and survivalRESUMELe diabète se caractérise par une déficience en insuline qui résulte d'une destruction des cellules bêta (β) pancréatiques sécrétant l'insuline [Type 1], ou à un défaut de sécrétion d'insuline qui peut être associé à la mort des cellules β (Type 2). La compréhension des mécanismes de néogenèse des cellules β, ainsi que l'identification de gènes impliqués dans leur survie et dans le contrôle de la sécrétion d'insuline est donc importante pour le traitement du diabète. Le facteur de transcription de type répresseur, RE-1 Silencing Transcription Factor [REST], contribue à la spécificité d'expression dans les neurones et les cellules β, d'un grand nombre de gènes portant son motif de fixation, le Repressor Element-1 (RE-1). Pour cela, REST est exprimé dans toutes les cellules, sauf dans les neurones et les cellules β. Afin d'identifier les gènes cibles de REST ainsi que leur fonction au sein de la cellule β, nous avons généré des souris transgéniques qui expriment REST spécifiquement dans ces cellules, sous la dépendance du promoteur de l'insuline (souris RIP-REST]. Cette expression ectopique de REST a permis de diminuer l'expression des gènes contrôlés par REST, et d'en analyser les conséquences. Nous avons montré que les souris RIP-REST étaient intolérantes au glucose et que ceci était du à un défaut de sécrétion d'insuline. Pour expliquer ce phénotype, nous avons mis en évidence le fait que des gènes cibles de REST codent pour des protéines importantes pour l'exocytose de l'insuline, comme SNAP25, Synaptotagmin (Syt) IX, Complexin II ou ICA512. De plus, nous avons découvert deux nouvelles cibles de REST impliquées dans la sécrétion d'insuline, Syt IV et Syt VII. Par la suite, nous avons démontré qu'une nouvelle lignée de souris RIP-REST étaient atteintes d'un diabète sévère à cause d'une perte massive des cellules β. La disparition de ces cellules a été expliquée par l'identification de gènes cibles de REST impliqués dans la survie des cellules β, comme Ibl, Irs2, Ica512 ou la Connexine36. De plus, nous avons découvert qu'une nouvelle cible, Cdk5r2, était aussi impliquée dans la survie des cellules β. Dans une dernière partie, nous suggérons, grâce à l'analyse de nouvelles souris transgéniques exprimant constitutivement REST dans les cellules progénitrices du pancréas embryonnaire, que REST empêche la formation des précurseurs de cellules endocrines ainsi que la différenciation de ces cellules. L'analyse de l'expression de REST au cours du développement embryonnaire du pancréas indique que la diminution de l'expression de REST conduit en partie, à l'induction d'un de ses gènes cible Mytl, qui favorise la formation de précurseurs endocrines. Nous proposons donc que le système REST/RE-1 est important pour la génération, la fonction et la survie des cellules β.

Method to assess and optimise dependability of complex macro-systems: application to a railway signalling system

Achieving a high degree of dependability in complex macro-systems is challenging. Because of the large number of components and numerous independent teams involved, an overview of the global system performance is usually lacking to support both design and operation adequately. A functional failure mode, effects and criticality analysis (FMECA) approach is proposed to address the dependability optimisation of large and complex systems. The basic inductive model FMECA has been enriched to include considerations such as operational procedures, alarm systems. environmental and human factors, as well as operation in degraded mode. Its implementation on a commercial software tool allows an active linking between the functional layers of the system and facilitates data processing and retrieval, which enables to contribute actively to the system optimisation. The proposed methodology has been applied to optimise dependability in a railway signalling system. Signalling systems are typical example of large complex systems made of multiple hierarchical layers. The proposed approach appears appropriate to assess the global risk- and availability-level of the system as well as to identify its vulnerabilities. This enriched-FMECA approach enables to overcome some of the limitations and pitfalls previously reported with classical FMECA approaches.

Integration of teacher education into the Swiss higher education system

The integration of specific institutions for teacher education into the higher education system represents a milestone in the Swiss educational policy and has broad implications. This thesis explores organizational and institutional change resulting from this policy reform, and attempts to assess structural change in terms of differentiation and convergence within the system of higher education. Key issues that are dealt with are, on the one hand, the adoption of a research function by the newly conceptualized institutions of teacher education, and on the other, the positioning of the new institutions within the higher education system. Drawing on actor-centred approaches to differentiation, this dissertation discusses system-level specificities of tertiarized teacher education and asks how this affects institutional configurations and actor constellations. On the basis of qualitative and quantitative empirical data, a comparative analysis has been carried out including case studies of four universities of teacher education as well as multivariate regression analysis of micro-level data on students' educational choices. The study finds that the process of system integration and adaption to the research function by the various institutions have unfolded differently depending on the institutional setting and the specific actor constellations. The new institutions have clearly made a strong push to position themselves as a new institutional type and to find their identity beyond the traditional binary divide which assigns the universities of teacher education to the college sector. Potential conflicts have been identified in divergent cognitive normative orientations and perceptions of researchers, teacher educators, policy-makers, teachers, and students as to the mission and role of the new type of higher education institution. - L'intégration dans le système d'enseignement supérieur d'institutions qui ont pour tâche spécifique de former des enseignants peut être considérée comme un événement majeur dans la politique éducative suisse, qui se trouve avoir des conséquences importantes à plusieurs niveaux. Cette thèse explore les changements organisationnels et institutionnels résultant de cette réforme politique, et elle se propose d'évaluer en termes de différentiation et de convergence les changements structurels intervenus dans le système d'éducation tertiaire. Les principaux aspects traités sont d'une part la nouvelle mission de recherche attribuée à ces institutions de formation pédagogique, et de l'autre la place par rapport aux autres institutions du système d'éducation tertiaire. Recourant à une approche centrée sur les acteurs pour étudier les processus de différen-tiation, la thèse met en lumière et en discussion les spécificités inhérentes au système tertiaire au sein duquel se joue la formation des enseignants nouvellement conçue et soulève la question des effets de cette nouvelle façon de former les enseignants sur les configurations institutionnelles et les constellations d'acteurs. Une analyse comparative a été réalisée sur la base de données qualitatives et quantitatives issues de quatre études de cas de hautes écoles pédagogiques et d'analyses de régression multiple de données de niveau micro concernant les choix de carrière des étudiants. Les résultats montrent à quel point le processus d'intégration dans le système et la nouvelle mission de recherche peuvent apparaître de manière différente selon le cadre institutionnel d'une école et la constellation spécifique des acteurs influents. A pu clairement être observée une forte aspiration des hautes écoles pédagogiques à se créer une identité au-delà de la structure binaire du système qui assigne la formation des enseignants au secteur des hautes écoles spéciali-sées. Des divergences apparaissent dans les conceptions et perceptions cognitives et normatives des cher-cheurs, formateurs, politiciens, enseignants et étudiants quant à la mission et au rôle de ce nouveau type de haute école. - Die Integration spezieller Institutionen für die Lehrerbildung ins Hochschulsystem stellt einen bedeutsamen Schritt mit weitreichenden Folgen in der Entwicklung des schweizerischen Bildungswesens dar. Diese Dissertation untersucht die mit der Neuerung verbundenen Veränderungen auf organisatorischer und institutioneller Ebene und versucht, die strukturelle Entwicklung unter den Gesichtspunkten von Differenzierung und Konvergenz innerhalb des tertiären Bildungssystems einzuordnen. Zentrale Themen sind dabei zum einen die Einführung von Forschung und Entwicklung als zusätzlichem Leistungsauftrag in der Lehrerbildung und zum andern die Positionierung der pädagogischen Hochschulen innerhalb des Hochschulsystems. Anhand akteurzentrierter Ansätze zur Differenzierung werden die Besonderheiten einer tertiarisierten Lehrerbildung hinsichtlich der Systemebenen diskutiert und Antworten auf die Frage gesucht, wie die Reform die institutionellen Konfigurationen und die Akteurkonstellationen beeinflusst. Auf der Grundlage qualitativer und quantitativer Daten wurde eine vergleichende Analyse durchgeführt, welche Fallstudien zu vier pädagogischen Hochschulen umfasst sowie Regressionsanalysen von Mikrodaten zur Studienwahl von Maturanden. Die Ergebnisse machen deutlich, dass sich der Prozess der Systemintegration und die Einführung von Forschung in die Lehrerbildung in Abhängigkeit von institutionellen Ordnungen und der jeweiligen Akteurkonstellation unterschiedlich gestalten. Es lässt sich bei den neu gegründeten pädagogischen Hochschulen ein starkes Bestreben feststellen, sich als neuen Hochschultypus zu positionieren und sich eine Identität zu schaffen jenseits der herkömmlichen binären Struktur, welche die pädagogischen Hochschulen dem Fachhochschul-Sektor zuordnet. Potentielle Konflikte zeichnen sich ab in den divergierenden kognitiven und normativen Orientierungen und Wahrnehmungen von Forschern, Ausbildern, Bildungspolitikern, Lehrern und Studierenden hinsichtlich des Auftrags und der Rolle dieses neuen Typs Hochschule.

Multiple roles of mouse Numb in tuning developmental cell fates.

BACKGROUND: Notch signaling regulates multiple differentiation processes and cell fate decisions during both invertebrate and vertebrate development. Numb encodes an intracellular protein that was shown in Drosophila to antagonize Notch signaling at binary cell fate decisions of certain cell lineages. Although overexpression experiments suggested that Numb might also antagonize some Notch activity in vertebrates, the developmental processes in which Numb is involved remained elusive. RESULTS: We generated mice with a homozygous inactivation of Numb. These mice died before embryonic day E11.5, probably because of defects in angiogenic remodeling and placental dysfunction. Mutant embryos had an open anterior neural tube and impaired neuronal differentiation within the developing cranial central nervous system (CNS). In the developing spinal cord, the number of differentiated motoneurons was reduced. Within the peripheral nervous system (PNS), ganglia of cranial sensory neurons were formed. Trunk neural crest cells migrated and differentiated into sympathetic neurons. In contrast, a selective differentiation anomaly was observed in dorsal root ganglia, where neural crest--derived progenitor cells had migrated normally to form ganglionic structures, but failed to differentiate into sensory neurons. CONCLUSIONS: Mouse Numb is involved in multiple developmental processes and required for cell fate tuning in a variety of lineages. In the nervous system, Numb is required for the generation of a large subset of neuronal lineages. The restricted requirement of Numb during neural development in the mouse suggests that in some neuronal lineages, Notch signaling may be regulated independently of Numb.

Testing Spatial Autocorrelation in Weighted Networks : the Modes Permutation Test

In a weighted spatial network, as specified by an exchange matrix, the variances of the spatial values are inversely proportional to the size of the regions. Spatial values are no more exchangeable under independence, thus weakening the rationale for ordinary permutation and bootstrap tests of spatial autocorrelation. We propose an alternative permutation test for spatial autocorrelation, based upon exchangeable spatial modes, constructed as linear orthogonal combinations of spatial values. The coefficients obtain as eigenvectors of the standardised exchange matrix appearing in spectral clustering, and generalise to the weighted case the concept of spatial filtering for connectivity matrices. Also, two proposals aimed at transforming an acessibility matrix into a exchange matrix with with a priori fixed margins are presented. Two examples (inter-regional migratory flows and binary adjacency networks) illustrate the formalism, rooted in the theory of spectral decomposition for reversible Markov chains.

Comparison between molecular dynamics abd Monte Carlo simulations of an ordering process in a binary alloy

Ordering in a binary alloy is studied by means of a molecular-dynamics (MD) algorithm which allows to reach the domain growth regime. Results are compared with Monte Carlo simulations using a realistic vacancy-atom (MC-VA) mechanism. At low temperatures fast growth with a dynamical exponent x>1/2 is found for MD and MC-VA. The study of a nonequilibrium ordering process with the two methods shows the importance of the nonhomogeneity of the excitations in the system for determining its macroscopic kinetics.

Evaluation of Bridge Replacement Alternatives for the County Bridge System, HR-365 August 1994

Recent reports have indicated that 23.5 percent of the nation's highway bridges are structurally deficient and 17.7 percent are functionally obsolete. A significant number of these bridges are on the Iowa county road system. The objective of the investigation described in this report was to identify, review and evaluate replacement bridges currently being used by various counties in Iowa and surrounding states. Iowa county engineers, county engineers in neighboring states as well as private manufacturers of bridge components, and regional precad prestressed concrete manufacturers were contacted to determine the most common replacement bridge types being used. Depending upon the findings of the review, possible improvements and/or new replacement bridge systems were to be proposed. A questionnaire was developed and sent to county engineers in Iowa and several counties in surrounding states. The results of the questionnaire showed that the most common replacement bridges in Iowa are the continuous concrete slab and prestressed concrete bridges. The primary reason these types are used is because of the availability of standard designs and because of their ease of maintenance. Counties seldom construct these types of bridges using their own labor forces, but instead contract the work. However, county forces are used to construct steel stringer, precast reinforced concrete and timber bridges. In general, 69 percent of the counties indicate an ability and willingness to use their own forces to design and construct relatively short span bridges (i.e., 40 A or less) provided the construction procedures are relatively simple. Several unique replacement bridge types used in Iowa that are constructed by county forces are documented and presented in this report. Sufficient details are provided to allow county engineers to determine if some of these bridges could be used to resolve some of their own replacement bridge problems. Where possible, cost information has also been provided. Each of these bridge types were evaluated for various criteria (e.g., cost effectiveness, conformance to AASI-ITO standards, range of sizes, etc.) by a panel of four Iowa county engineers; a summary of this critique is included. After evaluating the questionnaire responses from the counties and evaluating the various bridge replacement concepts currently in use, one new bridge replacement concept and one modification of a current Iowa county bridge replacement concept were developed. Both of these concepts would utilize county labor forces.