A case study to investigate the life cycle carbon emissions and carbon storage capacity of a cross laminated timber, multi-storey residential building

Forests are a store of carbon and an eco-system that continually removes carbon dioxide from the atmosphere. If they are sustainably managed, the carbon store can be maintained at a constant level, while the trees removed and converted to timber products can form an additional long term carbon store. The total carbon store in the forest and associated ‘wood chain’ therefore increases over time, given appropriate management. This increasing carbon store can be further enhanced with afforestation. The UK’s forest area has increased continually since the early 1900s, although the rate of increase has declined since its peak in the late 1980s, and it is a similar picture in the rest of Europe. The increased sustainable use of timber in construction is a key market incentive for afforestation, which can make a significant contribution to reducing carbon emissions. The case study presented in this paper demonstrates the carbon benefits of a Cross Laminated Timber (CLT) solution for a multi-storey residential building in comparison with a more conventional reinforced concrete solution. The embodied carbon of the building up to completion of construction is considered, together with the stored carbon during the life of the building and the impact of different end of life scenarios. The results of the study show that the total stored carbon in the CLT structural frame is 1215tCO2 (30tCO2 per housing unit). The choice of treatment at end of life has a significant effect on the whole life embodied carbon of the CLT frame, which ranges from -1017 tCO2e for re-use to +153tCO2e for incinerate without energy recovery. All end of life scenarios considered result in lower total CO2e emissions for the CLT frame building compared with the reinforced concrete frame solution.

The power of perceptions: exploring the role of urban design in cycling behaviours and healthy ageing

Good urban design has the power to aid in the provision of inclusive journey environments, yet traditionally neglects the perspective of the cyclist. This paper starts from the premise that more can be done to understand and articulate cyclists’ experiences and perceptions of the urban environment in which they cycle, as part of a closer linking of urban design qualities with transport planning and infrastructure interventions. This approach is particularly applicable in relation to older cyclists, a group whose needs are often poorly understood and for whom perceptions can significantly influence mobile behaviours. Currently, knowledge regarding the relationship between the built environment and physical activity, including cycling, in older adults is limited. As European countries face up to the challenges associated with ageing populations, some metropolitan regions, such as Munich, Germany, are making inroads into widening cycling’s appeal across generations through a combination of urban design, policy and infrastructure initiatives. The paper provides a systematic understanding of the urban design qualities and built environment features that affect cycling participation and have the potential to contribute towards healthy ageing. Urban design features such as legibility, aesthetics, scale and open space have been shown to influence and affect other mobile behaviours (e.g. walking), but their role as a mediator in cycle behaviour remains under-explored. Many of these design ‘qualities’ are related to individual perceptions; capturing these can help build a picture of quality in the built environment that includes an individual’s relationship with their local neighbourhood and its influences on their mobility choices. Issues of accessibility, facilities, and safety in cycling remain crucial, and, when allied to these design ‘qualities‘, provides a more rounded reflection of everyday journeys and trips taken or desired. The paper sets out the role that urban design might play in mediating these critical mobility issues, and in particular, in better understanding the ‘quality of the journey’. It concludes by highlighting the need for designers, policy makers, planners and academics to consider the role that design can play in encouraging cycle participation, especially as part of a healthy ageing agenda.

Terahertz analysis of stratified wall plaster at buildings of cultural importance across Europe

Terahertz (THz) radiation is being developed as a tool for the analysis of cultural heritage, and due to recent advances in technology is now available commercially in systems which can be deployed for field analysis. The radiation is capable of penetrating up to one centimetre of wall plaster and is delivered in ultrafast pulses which are reflected from layers within this region. The technique is non-contact, non-invasive and non-destructive. While sub-surface radar is able to penetrate over a metre of wall plaster, producing details of internal structures, infrared and ultraviolet techniques produce information about the surface layers of wall plaster. THz radiation is able to provide information about the interim region of up to approximately one centimetre into the wall surface. Data from Chartres Cathedral, France, Riga Dome Cathedral, Latvia, and Chartreuse du Val de Bénédiction, France is presented each with different research questions. The presence of sub-surface paint layers was expected from documentary evidence, dating to the 13th Century, at Chartres Cathedral. In contrast, at the Riga Dome Cathedral surface painting had been obscured as recently as 1941 during the Russian occupation of Latvia using white lead-based paint. In the 13th Century, wall paintings at the Chapel of the Frescos, Chartreuse du Val de Benediction in Villeneuve les Avignon were constructed using sinopia under-painting on plaster covering uneven stonework.. This paper compares and contrasts the ability of THz radiation to provide information about sub-surface features in churches and Cathedrals across Europe by analysing depth based profiles gained from the reflected signal. © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE).

An investigation of the role of business analysts in IS development

Business analysis has developed since the early 1990s as an IS discipline that is concerned with understanding business problems, defining requirements and evaluating relevant solutions. However, this discipline has had limited recognition within the academic community and little research has been conducted into the practices and standards employed by business analysts. This paper reports on a study into business analysis that considered the activities conducted and the outcomes experienced on IS projects. Senior business analysts were interviewed in order to gain insights into the business analyst role and the techniques and approaches applied when conducting this work. The Context, Content, Process, Outcomes framework was adopted as a basis for developing the interview questions. The data collected was analysed using the template analysis technique and the template was based upon this framework. Additional themes concerning aspects of business analysis that may contribute to IS success emerged during data analysis. These included the key business analysis activities and the skills business analysts require to perform these activities. The organisational attitude was also identified as a key factor in enabling the use and contribution of business analysis.

You make it happen: document demand, typeface supply

The basic premise of this article is that typefaces reflect, and respond to, the conditions of making and using documents; and that demand for evolving document genres drives the development of new typefaces. The article describes how the combination of a narrow range for functionally acceptable letters and paragraphs, and a wide range of possibilities to express these arrangements, offers a revealing tool for examining changes in the perceptions of professionals in visual communication. Beyond technical issues, the choices of document makers allow insights into wider trends such as urbanisation, demographic changes, education standards, and wider issues of visual literacy.

Paul Renner: the art of typography

The first study, in any language, of this German typographer and type designer. Renner’s work exemplifies central themes in German culture in the first half of the twentieth century. Starting as an artist and book designer in the Munich cultural renaissance, he was an early and prominent member of the Deutscher Werkbund. In the 1920s Renner worked in Frankfurt, one of the centres of socially-engaged modernism; around this time he began work on his enduring typeface, Futura. Moving to Munich, he ran the printing school that included Jan Tschichold among its teachers. In the crisis of 1933 he was detained and then dismissed from his post. Living through the Nazi years in inner emigration, Renner emer­ged as a voice of experience and reason in postwar debates.

The fractured lives of German Bohemian children, born 1933-40 in the area known as Sudetenland: a memory study, Nablonz-Neugablonz

At the Paris Peace Conferences of 1918-1919, new states aspiring to be nation-states were created for 60 million people, but at the same time 25 million people found themselves as ethnic minorities. This change of the old order in Europe had a considerable impact on one such group, more than 3 million Bohemian German-speakers, later referred to as Sudeten Germans. After the demise of the Habsburg Empire In 1918, they became part of the new state of Czechoslovakia. In 1938, the Munich Agreement – prelude to the Second World War – integrated them into Hitler’s Reich; in 1945-1946 they were expelled from the reconstituted state of Czechoslovakia. At the centre of this War Child case study are German children from the Northern Bohemian town and district, formerly known as Gablonz an der Neisse, famous for exquisite glass art, now Jablonec nad Nisou in the Czech Republic. After their expulsion they found new homes in the post-war Federal Republic of Germany. In addition, testimonies have been drawn upon of some Czech eyewitnesses from the same area, who provided their perspective from the other side, as it were. It turned out to be an insightful case study of the fate of these communities, previously studied mainly within the context of the national struggle between Germans and Czechs. The inter-disciplinary research methodology adopted here combines history and sociological research to demonstrate the effect of larger political and social developments on human lives, not shying away from addressing sensitive political and historical issues, as far as these are relevant within the context of the study. The expellees started new lives in what became Neugablonz in post-war Bavaria where they successfully re-established the industries they had had to leave behind in 1945-1946. Part 1 of the study sheds light on the complex Czech-German relationship of this important Central European region, addressing issues of democracy, ethnicity, race, nationalism, geopolitics, economics, human geography and ethnography. It also charts the developments leading to the expulsion of the Sudeten Germans from Czechoslovakia after 1945. What is important in this War Child study is how the expellees remember their history while living as children in Sudetenland and later. The testimony data gained indicate that certain stereotypes often repeated within the context of Sudeten issues such as the confrontational nature of inter-ethnic relations are not reflected in the testimonies of the respondents from Gablonz. In Part 2 the War Child Study explores the memories of the former Sudeten war children using sociological research methods. It focuses on how they remember life in their Bohemian homeland and coped with the life-long effects of displacement after their expulsion. The study maps how they turned adversity into success by showing a remarkable degree of resilience and ingenuity in the face of testing circumstances due to the abrupt break in their lives. The thesis examines the reasons for the relatively positive outcome to respondents’ lives and what transferable lessons can be deduced from the results of this study.

Which strategies can an educational business, such as a kindergarten in Germany, develop to foster employee engagement?

Which strategies can an educational business, such as a Kindergarten in Germany, develop to foster employee engagement? The goal of this master thesis is to identify effective and viable measures to engage employees, that could be potentially implemented in a Kindergarten in Germany. The literature concerning the notion of employee engagement is so inconsistent that even studies about the subject fail to find one common definition and have to acknowledge the variety of existing definitions (IES, 2014, p.52-53). This reflects the youth of the concept, which has only been partially studied by academics and practitioners in recent years. The literature gap about employee engagement concerns many aspects, among which small companies and educational businesses, in particular those focusing on early child development. Considering the low levels of employee engagement in Germany combined with the absence of studies on educational organizations focusing in early child development this master thesis studies engagement in German Kindergärten(s). This master thesis is divided in two parts consisting of a literature review and a case study. The literature review allows to follow the evolution of the concept along the years, while the case study focuses on assessing employee engagement in Montessori Kindergärten(s) in Munich & elaborating potential measures to increase engagement levels. Double sided research was undertaken for this case study. On the one hand a quantitative research was performed, through a survey, in order to uncover which strategies would be viable to foster employee engagement. On the other hand a qualitative research was undertaken, consisting in an internship in a Kindergarten, in order to shed light on how to do so. Findings in the quantitative research indicate overall engagement levels average to low. Results related to specific statements bring out the originality of the educational sector, which is in some aspects intrinsically engaging, similarly to the medical field (Seijts & Crim, 2006). Furthermore low engagement levels led to a conversely high number of positives responses to potential engagement strategies suggesting their potential effectiveness. Findings in the qualitative research are coherent with qualitative results and complement them

Qualitative and quantitative characterization of aluminium alloys after corrosion testing

The 2024 and 7050 aluminium alloys used as aircraft components were subjected to laboratory corrosion tests in sodium chloride solution, Light-microscope examinations make it possible to characterise morphological aspects of the localised corrosion. Image analysis was used to determine both depth and width of pits over corroded surfaces. It has been concluded that the annealing could reduce the pit growth in both alloys, by means of grains recrystallization or recovery. The 2024 alloy also tends to present an exfoliation mechanism, mainly throughout non-recrystallized and recrystallized grain boundaries, increasing the width and sustaining the depth of pit cavities during exposition to saline atmosphere. SEM and EDS analysis reveal the morphology and elemental distribution of the corrosion products formed after immersion corrosion test. Some of these products were identified by X-ray diffraction analysis. For 2024, Al(OH)(3), MS(OH)(2) and Cu2O were found. AI(OH)(3) and Cu2O were also found in 7050 samples.

A metallurgical study of aluminium alloys used as aircraft components

The effects of heat treatment on morphologies and microstructures of Al 2024 and Al 7050 alloys, used as aircraft components, were studied by metallographic techniques. Light microscopy (LM) and quantitative image analysis were used to characterize the precipitate dispersion and morphology for these alloys. The application of the scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS) combined techniques for studying these multiphase systems makes it possible to distinguish and quantify the different phases in the surface structure. Xray diffraction also permitted a qualitative comparison of the structures before and after heat treatments.

Quantitative characterization of multi-phase materials by digital image processing

An automatic image processing and analysis technique has been developed for quantitative characterization of multi-phase materials. For the development of this technique is used the Khoros system that offers the basic morphological tools and a flexible, visual programming language. These techniques are implemented in a highly user oriented image processing environment that allows the user to adapt each step of the processing to his special requirements.To illustrate the implementation and performance of this technique, images of two different materials are processed for microstructure characterization. The result is presented through the determination of volume fraction of the different phases or precipitates.

Influence of aged Ti-15V-3Cr-3Sn-3Al alloy microstructure on chemical and electrochemical behavior in the Kroll reagent for metallographic etching

The chemical and electrochemical behaviour of the Ti-1 5V-3Cr-3Sn-3Al alloy in Kroll reagent has been studied after ageing at 350-600degreesC, to optimise metallographic etching. Etching tests and polarisation curves showed that samples aged at higher temperatures have been more susceptible to corrosion. It has been attributed to the formation of intra- and intergranular alpha-phase precipitates during ageing.

Quantitative fractography under light microscopy: A digital image processing approach

This work is an example of the improvement on quantitative fractography by means of digital image processing and light microscopy. Two techniques are presented to investigate the quantitative fracture behavior of Ti-4Al-4V heat-treated alloy specimens, under Charpy impact testing. The first technique is the Minkowski method for fractal dimension measurement from surface profiles, revealing the multifractal character of Ti-4Al-4V fracture. It was not observed a clear positive correlation of fractal values against Charpy energies for Ti-4Al-4V alloy specimens, due to their ductility, microstructural heterogeneities and the dynamic loading characteristics at region near the V-notch. The second technique provides an entire elevation map of fracture surface by extracting in-focus regions for each picture from a stack of images acquired at successive focus positions, then computing the surface roughness. Extended-focus reconstruction has been used to explain the behavior along fracture surface. Since these techniques are based on light microscopy, their inherent low cost is very interesting for failure investigations.

Digital Light Microscopy of Macroporous Ceramics Processed by Consolidation Casting with Mixtures of Native Starches

Porosity in starch consolidation casting technique is rightly related to original size and morphology of starch granules, leaving a pore structure after burning out. This work reports the results for the addition of different native potato and corn starch proportions in suspension,; with TiO(2) (rutile) powder. Gelling temperature have been defined after observation under light microscopy using a heating stage. Analysis of porous network and isolated pores have been clone from images of samples surfaces obtained by depth from focus reconstruction, revealing a qualitative correlation of pores characteristics and starches additions in suspensions, suggesting that the presence of isolated or interconnected pores can be handled by starches selection to control the amylopectin and amylose contents in slurries. Also, the analysis of porous fraction distribution shows no consistent pattern through specimens' volume according to starches in mixtures.

Stratified Sampling Applied to Estimation of the Volumetric Fraction of Alumina in Cast Metal Matrix Composites

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)