962 resultados para Mortar and concrete
Resumo:
The paper presents part of an evolutionary study regarding the ideas of children and adolescents on urban violence. The study included 40 subjects aged between 6 and 15; consisting of 10 subjects aged 6; 10 aged 9; 10 aged 12; and 10 aged 15. All subjects were enrolled in two public schools, one located in the interior of São Paulo’s State and the other in greater São Paulo. The subjects underwent three methodological procedures: a clinical interview, the drawing of a picture, and the analysis of a movie. In this paper, we present the data obtained from the application of the clinical interview, specifically those concerning the main theme: “definition of violence.” The results indicate that most subjects have difficulties in understanding and defining the phenomenon of violence and its complexity. They tend to associate it only to the most visible and concrete situations or conflicts, focusing on a basic level of understanding of the social reality. The analysis and the theoretical references are based on the Piagetian perspective about the construction of social knowledge. Pedagogical implications based on the evolutionary psychogenic studies as well as the understanding of the processes covered for the understanding of social reality are also presented in the article.
Resumo:
Pós-graduação em Química - IQ
Resumo:
Due to the high value of the bill that the Brazilian has been paying, one of the most expensive in the world, is becoming increasingly attractive the option for renewable energy in form of distributed micro and minigeneration. In other words, the renewable energy sources are becoming attractive not only because of environmental concerns, but also due to economic issues. This has become even more relevant and concrete after approval of rules by National Agency of Electric Energy (ANEEL) on 4/17/2012 (Normative Resolution n ° 482/2012 of 04/17/2012) aimed at reducing barriers to installation of small distributed generation, including microgeneration, with up to 100 kW of power, and minigeneration, 100 kW to 1 MW. The Normative Resolution n ° 482/2012 creates the Energy Clearing System, which allows consumers to install small generators in its consumer unit and exchange energy with the local distributor. The rule applies to generators that use renewable sources of energy (hydro, solar, biomass, wind and cogeneration qualified). In this context, this paper presents a technical and economic analysis of installing a residential microgenerating plant composed of photovoltaic cells, solar panels and small wind turbines
Resumo:
Due to the high value of the bill that the Brazilian has been paying, one of the most expensive in the world, is becoming increasingly attractive the option for renewable energy in form of distributed micro and minigeneration. In other words, the renewable energy sources are becoming attractive not only because of environmental concerns, but also due to economic issues. This has become even more relevant and concrete after approval of rules by National Agency of Electric Energy (ANEEL) on 4/17/2012 (Normative Resolution n ° 482/2012 of 04/17/2012) aimed at reducing barriers to installation of small distributed generation, including microgeneration, with up to 100 kW of power, and minigeneration, 100 kW to 1 MW. The Normative Resolution n ° 482/2012 creates the Energy Clearing System, which allows consumers to install small generators in its consumer unit and exchange energy with the local distributor. The rule applies to generators that use renewable sources of energy (hydro, solar, biomass, wind and cogeneration qualified). In this context, this paper presents a technical and economic analysis of installing a residential microgenerating plant composed of photovoltaic cells, solar panels and small wind turbines
Resumo:
In civil engineering, a structure is the whole sustainment of a construction and, thus, it is important that it remains intact throughout its lifetime. An engineering construction must last for decades without losing its functionality. However its purpose may be altered and several times the original structure does not meet the new needs of use. Still, in new buildings, the functionality is altered due to possible flaws in execution and the structure, invariably does not reach the desired solicitation needs. In cases like this, the commonly adopted solutions are, basically, the demolishment followed by the reconstruction of the desired mold or the structural reinforcement. This second option, for long years, has not been put to practice due to certain factors such as the high costs for its implantation, use of inadequate reinforcement execution techniques, and the culture of people involved in the area regarding its use and, in this case, the option would always be the reconstruction. Thoughtout the years, some techniques were developed to allow the execution of structural reinforcements with low costs and in efficient ways. An interesting, fast, efficient and economical technique is the structural reinforcement through metal sheets put together with epoxy resin that can be applied in beams, slabs and pillars. In the present work the different behavior of beams reinforced with this technique. Steel is a very recommended material for these reinforcements due to its characteristics related to traction, compression and the effectiveness of the technique related to its cost. For the attachment the epoxy resin is recommended, since it allows the joining of two materials, in this case, steel and concrete. The efficiency of this union is so considerably high that it rarely produces any flaws in adherence and, normally, when it happens it is due to problems in the execution process, not in the union of materials
Resumo:
This work is to control the quality of the structures, procedures for addressing the assembly of the formwork, scaffolding and the frame of pillars, beams and slabs. He had also intended to show that the vibration of launch and concrete items are also important, if poorly implemented can undermine the structure. This work also shows that the mapping becomes essential if there is some problem in the concrete, where concrete was launched, could be identified. And finally check the product where the structure will be evaluated for how much their quality
Resumo:
Six species of the genus Callithrix can be found across the Atlantic Forest extension, being the Callithrix geoffroyi, Geoffroy`s marmoset, the least studied species. The objective of this study is to investigate the behavioral aspects of the species in captivity, and how the environmental enrichment techniques influence those behaviors. To this end, we have studied three specimens of C. geoffroyi, in captivity at Municipal Zoo of Piracicaba, São Paulo. The enclosure includes a 37m2 with under masonry, concrete platforms with external deep, trunks, a floor of grass and soil, e grid in their other three sides. The sampling method was focal per time interval, with records every 30 seconds in sessions of 30 minutes, totaling 30 hours for each animal, which were distributed in a baseline phase, an environmental enrichment phase and post-enrichment phase (n = 3660 records in each phase). The twelve enrichment techniques were applied: the physical environment (branches for perches and hoses fabrics for bedding and vanishing points), cognitive (radio, mirror, puzzle food) and food (insects, flowers and eggs hidden, wrapped). Initially, to determine the period of greatest activity of marmosets, we investigated the pattern of activity for three days (9:00 am to 17:00 pm) consecutively at intervals of 15 minutes, recording the number of active and inactive individuals. The 495 records signaled greater activity in the morning, then selected period for the completion of this work. The ethogram comprised 16 behaviors. The inactivity was the predominant phase behavior baseline and post-enrichment with a significant decrease (h=8,62, p <0.01) in the enrichment phase, and a significant increase in the post enrichment (h=18,15, p <0.001). The same was seen for the use of substrate (grid and ground vs. Trunk and concrete, h=5,09, p <0.001 and h=3,98, p <0.05)... (Complete abstract click electronic access below)
Resumo:
CONAMA Resolution 307 / 02, in Article 4, states that the primary goal of those involved in the reuse process of construction and demolition waste is not the generation of such wastes, secondarily is the reduce, reuse, recycling and proper disposal of such material. The disposal problem of large volumes of waste generated coupled with the scarcity of natural resources and environmental degradation involved in the extraction process of such materials resulted in several studies, that after many analyzes proposed various forms of reuse and recycling . The NBR 15.116/04 provides requirements for the use of recycled aggregates in paving and concrete without structural function. This work aims to show the usage potential of recycled aggregates from waste generated in construction and demolition sampled Group AB Areias, Pindamonhangaba (SP) in order to meet the standards in Brazil, as well as the environmental contribution by reducing the use of raw materials extracted from nature. After stabilization and particle size analysis of the California Bearing Ratio and Proctor, obtained mixtures of recycled aggregates showed higher values submitted by the minimum standards related, with excellent potential for use in paving
Resumo:
Pós-graduação em Engenharia Civil - FEIS
Resumo:
The aim of this research study was to evaluate the structural behaviour of the wood and concrete composite system for bridge decks with emphasis on the metal shear connectors. Experimental tests were performed on composite specimens and wood and concrete beams with a metallic connector system in an X position, using CS100900-type screws. All specimens and beams were submitted to static loads until failure in order to obtain the strength and stiffness of the connection system. The experimental results for the stiffness of the beams were compared with the analytical results obtained through the Mohler model, presenting good equivalence for service loads. The experimental results obtained demonstrate that the most significant damage in composite systems occurred in the connectors' areas.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Pós-graduação em Zootecnia - FCAV
Resumo:
The rapid industrial development and disorganized population growth in huge cities bring about various urban problems due to intense use of physical space on and below the surface. Subsurface problems in metropolitan areas are caused by subway line construction, which often follows the routes of utility networks, such as electric and telephone cables, water and gas pipes, storm sewers, etc. Usually, the main problems are related to damage or destruction of preexisting utilities, often putting human lives at risk. With the purpose of minimizing risks. GPR-profiling with 200 MHz antennae was done at two sites, both located in downtown Sao Paulo, Brazil. The objectives of this work were to map utilities or existing infrastructure in the subsurface in order to orient the construction of the Line 4 (yellow) subway tunnel in Sao Paulo. GPR profiles can detect water pipes, utility networks in the subsurface, and concrete foundation columns or pilings in subsoil up to 2 m depth. In addition. the GPR profiles also provided details of the target shapes in the subsurface. GPR interpretations combined with lithological information from boreholes and trenches opened in the study areas were extremely important in mapping of the correct spatial distribution of buried utilities at these two sites in Sao Paulo. This information improves and updates maps of utility placement, serves as a basis for planning of the geotechnical excavation of the Line 4 (yellow) subway tunnel in Sao Paulo, helps minimize problems related to destruction of preexisting utilities in the subsoil, and avoids risk of dangerous accidents. (C) 2012 Elsevier B.V. All rights reserved.
Resumo:
Through-wall imaging (TWI) may provide vital information on interior environment in cases when physically entering such environment would pose danger to the person involved. The concept of ultra wideband radar (UWB radar) is an emerging technology, which offers high spatial resolution, as opposed to narrow band radars. Thus, TWI applications using UWB radar have become a growing field of research with several applications in the civil and defense areas such as rescue and surveillance. For this study, a prototype system of UWB radar to TWI has been built. Analyses and result to several kinds of experiments have been presented, that is, detection and visualization of metallic targets behind wooden board wall and concrete blocks wall. The results are encouraging and show the advantages of using UWB radar for TWI. (C) 2011 Wiley Periodicals, Inc. Microwave Opt Technol Lett, 54:339-344, 2012; View this article online at wileyonlinelibrary.com. DOI 10.1002/mop.26543
Resumo:
The improved workability effect of latex in dry mortars has not been fully clarified. The purpose of this research was to investigate the influence of the EVA copolymer on the cement hydration and on the rheological properties of cement pastes. The results pointed to a minor influence of EVA on cement hydration and to a ball-bearing effect. In fact, the shear thinning behavior of reference paste at 15 min after mixing changed to shear thickening owing to the EVA addition. This behavior could be explained by the decrease in the interparticle separation distance as consequence of the solid content increase in case of shearing detachment of weakly adhered EVA particles from the cement particles surfaces. The expected EVA plasticizing effect was observed at 60 min. Such behavior points to the stabilization of EVA on the cement particles surfaces, thus resulting in a steric barrier effect.