Computational studies for the design of process equipment with complex geometries

This study combines several projects related to the flows in vessels with complex shapes representing different chemical apparata. Three major cases were studied. The first one is a two-phase plate reactor with a complex structure of intersecting micro channels engraved on one plate which is covered by another plain plate. The second case is a tubular microreactor, consisting of two subcases. The first subcase is a multi-channel two-component commercial micromixer (slit interdigital) used to mix two liquid reagents before they enter the reactor. The second subcase is a micro-tube, where the distribution of the heat generated by the reaction was studied. The third case is a conventionally packed column. However, flow, reactions or mass transfer were not modeled. Instead, the research focused on how to describe mathematically the realistic geometry of the column packing, which is rather random and can not be created using conventional computeraided design or engineering (CAD/CAE) methods. Several modeling approaches were used to describe the performance of the processes in the considered vessels. Computational fluid dynamics (CFD) was used to describe the details of the flow in the plate microreactor and micromixer. A space-averaged mass transfer model based on Fick’s law was used to describe the exchange of the species through the gas-liquid interface in the microreactor. This model utilized data, namely the values of the interfacial area, obtained by the corresponding CFD model. A common heat transfer model was used to find the heat distribution in the micro-tube. To generate the column packing, an additional multibody dynamic model was implemented. Auxiliary simulation was carried out to determine the position and orientation of every packing element in the column. This data was then exported into a CAD system to generate desirable geometry, which could further be used for CFD simulations. The results demonstrated that the CFD model of the microreactor could predict the flow pattern well enough and agreed with experiments. The mass transfer model allowed to estimate the mass transfer coefficient. Modeling for the second case showed that the flow in the micromixer and the heat transfer in the tube could be excluded from the larger model which describes the chemical kinetics in the reactor. Results of the third case demonstrated that the auxiliary simulation could successfully generate complex random packing not only for the column but also for other similar cases.

A novel polar-based human face recognition computational model

Motivated by a recently proposed biologically inspired face recognition approach, we investigated the relation between human behavior and a computational model based on Fourier-Bessel (FB) spatial patterns. We measured human recognition performance of FB filtered face images using an 8-alternative forced-choice method. Test stimuli were generated by converting the images from the spatial to the FB domain, filtering the resulting coefficients with a band-pass filter, and finally taking the inverse FB transformation of the filtered coefficients. The performance of the computational models was tested using a simulation of the psychophysical experiment. In the FB model, face images were first filtered by simulated V1- type neurons and later analyzed globally for their content of FB components. In general, there was a higher human contrast sensitivity to radially than to angularly filtered images, but both functions peaked at the 11.3-16 frequency interval. The FB-based model presented similar behavior with regard to peak position and relative sensitivity, but had a wider frequency band width and a narrower response range. The response pattern of two alternative models, based on local FB analysis and on raw luminance, strongly diverged from the human behavior patterns. These results suggest that human performance can be constrained by the type of information conveyed by polar patterns, and consequently that humans might use FB-like spatial patterns in face processing.

A maximum likelihood framework for protein design

Affiliation: Claudia Kleinman, Nicolas Rodrigue & Hervé Philippe : Département de biochimie, Faculté de médecine, Université de Montréal

À la recherche d'un cadre théorique pour la pratique du design graphique

Les schémas en annexe ont été réalisés avec le logiciel Adobe Illustrator.

Design thinking and the precautionary principle : development of a theoretical model complementing preventive judgment for design for sustainability enriched through a study of architectural competitions adopting LEED

Cette thèse contribue à une théorie générale de la conception du projet. S’inscrivant dans une demande marquée par les enjeux du développement durable, l’objectif principal de cette recherche est la contribution d’un modèle théorique de la conception permettant de mieux situer l’utilisation des outils et des normes d’évaluation de la durabilité d’un projet. Les principes fondamentaux de ces instruments normatifs sont analysés selon quatre dimensions : ontologique, méthodologique, épistémologique et téléologique. Les indicateurs de certains effets contre-productifs reliés, en particulier, à la mise en compte de ces normes confirment la nécessité d’une théorie du jugement qualitatif. Notre hypothèse principale prend appui sur le cadre conceptuel offert par la notion de « principe de précaution » dont les premières formulations remontent du début des années 1970, et qui avaient précisément pour objectif de remédier aux défaillances des outils et méthodes d’évaluation scientifique traditionnelles. La thèse est divisée en cinq parties. Commençant par une revue historique des modèles classiques des théories de la conception (design thinking) elle se concentre sur l’évolution des modalités de prise en compte de la durabilité. Dans cette perspective, on constate que les théories de la « conception verte » (green design) datant du début des années 1960 ou encore, les théories de la « conception écologique » (ecological design) datant des années 1970 et 1980, ont finalement convergé avec les récentes théories de la «conception durable» (sustainable design) à partir du début des années 1990. Les différentes approches du « principe de précaution » sont ensuite examinées sous l’angle de la question de la durabilité du projet. Les standards d’évaluation des risques sont comparés aux approches utilisant le principe de précaution, révélant certaines limites lors de la conception d’un projet. Un premier modèle théorique de la conception intégrant les principales dimensions du principe de précaution est ainsi esquissé. Ce modèle propose une vision globale permettant de juger un projet intégrant des principes de développement durable et se présente comme une alternative aux approches traditionnelles d’évaluation des risques, à la fois déterministes et instrumentales. L’hypothèse du principe de précaution est dès lors proposée et examinée dans le contexte spécifique du projet architectural. Cette exploration débute par une présentation de la notion classique de «prudence» telle qu’elle fut historiquement utilisée pour guider le jugement architectural. Qu’en est-il par conséquent des défis présentés par le jugement des projets d’architecture dans la montée en puissance des méthodes d’évaluation standardisées (ex. Leadership Energy and Environmental Design; LEED) ? La thèse propose une réinterprétation de la théorie de la conception telle que proposée par Donald A. Schön comme une façon de prendre en compte les outils d’évaluation tels que LEED. Cet exercice révèle cependant un obstacle épistémologique qui devra être pris en compte dans une reformulation du modèle. En accord avec l’épistémologie constructiviste, un nouveau modèle théorique est alors confronté à l’étude et l’illustration de trois concours d'architecture canadienne contemporains ayant adopté la méthode d'évaluation de la durabilité normalisée par LEED. Une série préliminaire de «tensions» est identifiée dans le processus de la conception et du jugement des projets. Ces tensions sont ensuite catégorisées dans leurs homologues conceptuels, construits à l’intersection du principe de précaution et des théories de la conception. Ces tensions se divisent en quatre catégories : (1) conceptualisation - analogique/logique; (2) incertitude - épistémologique/méthodologique; (3) comparabilité - interprétation/analytique, et (4) proposition - universalité/ pertinence contextuelle. Ces tensions conceptuelles sont considérées comme autant de vecteurs entrant en corrélation avec le modèle théorique qu’elles contribuent à enrichir sans pour autant constituer des validations au sens positiviste du terme. Ces confrontations au réel permettent de mieux définir l’obstacle épistémologique identifié précédemment. Cette thèse met donc en évidence les impacts généralement sous-estimés, des normalisations environnementales sur le processus de conception et de jugement des projets. Elle prend pour exemple, de façon non restrictive, l’examen de concours d'architecture canadiens pour bâtiments publics. La conclusion souligne la nécessité d'une nouvelle forme de « prudence réflexive » ainsi qu’une utilisation plus critique des outils actuels d’évaluation de la durabilité. Elle appelle une instrumentalisation fondée sur l'intégration globale, plutôt que sur l'opposition des approches environnementales.

Patient-specific anisotropic model of human trunk based on MR data

There are many ways to generate geometrical models for numerical simulation, and most of them start with a segmentation step to extract the boundaries of the regions of interest. This paper presents an algorithm to generate a patient-specific three-dimensional geometric model, based on a tetrahedral mesh, without an initial extraction of contours from the volumetric data. Using the information directly available in the data, such as gray levels, we built a metric to drive a mesh adaptation process. The metric is used to specify the size and orientation of the tetrahedral elements everywhere in the mesh. Our method, which produces anisotropic meshes, gives good results with synthetic and real MRI data. The resulting model quality has been evaluated qualitatively and quantitatively by comparing it with an analytical solution and with a segmentation made by an expert. Results show that our method gives, in 90% of the cases, as good or better meshes as a similar isotropic method, based on the accuracy of the volume reconstruction for a given mesh size. Moreover, a comparison of the Hausdorff distances between adapted meshes of both methods and ground-truth volumes shows that our method decreases reconstruction errors faster. Copyright © 2015 John Wiley & Sons, Ltd.

Performance-Driven Microfabrication-Oriented Methodology for MEMS Conceptual Design with Application in Microfluidic Device Design

Performance and manufacturability are two important issues that must be taken into account during MEMS design. Existing MEMS design models or systems follow a process-driven design paradigm, that is, design starts from the specification of process sequence or the customization of foundry-ready process template. There has been essentially no methodology or model that supports generic, high-level design synthesis for MEMS conceptual design. As a result, there lacks a basis for specifying the initial process sequences. To address this problem, this paper proposes a performance-driven, microfabrication-oriented methodology for MEMS conceptual design. A unified behaviour representation method is proposed which incorporates information of both physical interactions and chemical/biological/other reactions. Based on this method, a behavioural process based design synthesis model is proposed, which exploits multidisciplinary phenomena for design solutions, including both the structural components and their configuration for the MEMS device, as well as the necessary substances for the chemical/biological/other reactions. The model supports both forward and backward synthetic search for suitable phenomena. To ensure manufacturability, a strategy of using microfabrication-oriented phenomena as design knowledge is proposed, where the phenomena are developed from existing MEMS devices that have associated MEMS-specific microfabrication processes or foundry-ready process templates. To test the applicability of the proposed methodology, the paper also studies microfluidic device design and uses a micro-pump design for the case study.

A Gain Scheduling Model Predictive Controller for Blood Glucose Control in Type 1 Diabetes

This paper presents a control strategy for blood glucose(BG) level regulation in type 1 diabetic patients. To design the controller, model-based predictive control scheme has been applied to a newly developed diabetic patient model. The controller is provided with a feedforward loop to improve meal compensation, a gain-scheduling scheme to account for different BG levels, and an asymmetric cost function to reduce hypoglycemic risk. A simulation environment that has been approved for testing of artificial pancreas control algorithms has been used to test the controller. The simulation results show a good controller performance in fasting conditions and meal disturbance rejection, and robustness against model–patient mismatch and errors in meal estimation

A proposal for the diagnosis of uncertain dynamic systems based on interval models

The performance of a model-based diagnosis system could be affected by several uncertainty sources, such as,model errors,uncertainty in measurements, and disturbances. This uncertainty can be handled by mean of interval models.The aim of this thesis is to propose a methodology for fault detection, isolation and identification based on interval models. The methodology includes some algorithms to obtain in an automatic way the symbolic expression of the residual generators enhancing the structural isolability of the faults, in order to design the fault detection tests. These algorithms are based on the structural model of the system. The stages of fault detection, isolation, and identification are stated as constraint satisfaction problems in continuous domains and solved by means of interval based consistency techniques. The qualitative fault isolation is enhanced by a reasoning in which the signs of the symptoms are derived from analytical redundancy relations or bond graph models of the system. An initial and empirical analysis regarding the differences between interval-based and statistical-based techniques is presented in this thesis. The performance and efficiency of the contributions are illustrated through several application examples, covering different levels of complexity.

Comparison of energy evaluation systems and a mechanistic model for milk production by dairy cattle offered fresh grass-based diets

Grass-based diets are of increasing social-economic importance in dairy cattle farming, but their low supply of glucogenic nutrients may limit the production of milk. Current evaluation systems that assess the energy supply and requirements are based on metabolisable energy (ME) or net energy (NE). These systems do not consider the characteristics of the energy delivering nutrients. In contrast, mechanistic models take into account the site of digestion, the type of nutrient absorbed and the type of nutrient required for production of milk constituents, and may therefore give a better prediction of supply and requirement of nutrients. The objective of the present study is to compare the ability of three energy evaluation systems, viz. the Dutch NE system, the agricultural and food research council (AFRC) ME system, and the feed into milk (FIM) ME system, and of a mechanistic model based on Dijkstra et al. [Simulation of digestion in cattle fed sugar cane: prediction of nutrient supply for milk production with locally available supplements. J. Agric. Sci., Cambridge 127, 247-60] and Mills et al. [A mechanistic model of whole-tract digestion and methanogenesis in the lactating dairy cow: model development, evaluation and application. J. Anim. Sci. 79, 1584-97] to predict the feed value of grass-based diets for milk production. The dataset for evaluation consists of 41 treatments of grass-based diets (at least 0.75 g ryegrass/g diet on DM basis). For each model, the predicted energy or nutrient supply, based on observed intake, was compared with predicted requirement based on observed performance. Assessment of the error of energy or nutrient supply relative to requirement is made by calculation of mean square prediction error (MSPE) and by concordance correlation coefficient (CCC). All energy evaluation systems predicted energy requirement to be lower (6-11%) than energy supply. The root MSPE (expressed as a proportion of the supply) was lowest for the mechanistic model (0.061), followed by the Dutch NE system (0.082), FIM ME system (0.097) and AFRCME system(0.118). For the energy evaluation systems, the error due to overall bias of prediction dominated the MSPE, whereas for the mechanistic model, proportionally 0.76 of MSPE was due to random variation. CCC analysis confirmed the higher accuracy and precision of the mechanistic model compared with energy evaluation systems. The error of prediction was positively related to grass protein content for the Dutch NE system, and was also positively related to grass DMI level for all models. In conclusion, current energy evaluation systems overestimate energy supply relative to energy requirement on grass-based diets for dairy cattle. The mechanistic model predicted glucogenic nutrients to limit performance of dairy cattle on grass-based diets, and proved to be more accurate and precise than the energy systems. The mechanistic model could be improved by allowing glucose maintenance and utilization requirements parameters to be variable. (C) 2007 Elsevier B.V. All rights reserved.

A conceptual design of a wireless sensor actuator system for optimising energy and well-being in a building

This article presents a prototype model based on a wireless sensor actuator network (WSAN) aimed at optimizing both energy consumption of environmental systems and well-being of occupants in buildings. The model is a system consisting of the following components: a wireless sensor network, `sense diaries', environmental systems such as heating, ventilation and air-conditioning systems, and a central computer. A multi-agent system (MAS) is used to derive and act on the preferences of the occupants. Each occupant is represented by a personal agent in the MAS. The sense diary is a new device designed to elicit feedback from occupants about their satisfaction with the environment. The roles of the components are: the WSAN collects data about physical parameters such as temperature and humidity from an indoor environment; the central computer processes the collected data; the sense diaries leverage trade-offs between energy consumption and well-being, in conjunction with the agent system; and the environmental systems control the indoor environment.

Managing digital coordination of design: emerging hybrid practices in an institutionalized project setting

What happens when digital coordination practices are introduced into the institutionalized setting of an engineering project? This question is addressed through an interpretive study that examines how a shared digital model becomes used in the late design stages of a major station refurbishment project. The paper contributes by mobilizing the idea of ‘hybrid practices’ to understand the diverse patterns of activity that emerge to manage digital coordination of design. It articulates how engineering and architecture professions develop different relationships with the shared model; the design team negotiates paper-based practices across organizational boundaries; and diverse practitioners probe the potential and limitations of the digital infrastructure. While different software packages and tools have become linked together into an integrated digital infrastructure, these emerging hybrid practices contrast with the interactions anticipated in practice and policy guidance and presenting new opportunities and challenges for managing project delivery. The study has implications for researchers working in the growing field of empirical work on engineering project organizations as it shows the importance of considering, and suggests new ways to theorise, the introduction of digital coordination practices into these institutionalized settings.

Software evolution: a graph based model

A model based on graph isomorphisms is used to formalize software evolution. Step by step we narrow the search space by an informed selection of the attributes based on the current state-of-the-art in software engineering and generate a seed solution. We then traverse the resulting space using graph isomorphisms and other set operations over the vertex sets. The new solutions will preserve the desired attributes. The goal of defining an isomorphism based search mechanism is to construct predictors of evolution that can facilitate the automation of ’software factory’ paradigm. The model allows for automation via software tools implementing the concepts.

Software evolution: a graph based model

A model based on graph isomorphisms is used to formalize software evolution. Step by step we narrow the search space by an informed selection of the attributes based on the current state-of-the-art in software engineering and generate a seed solution. We then traverse the resulting space using graph isomorphisms and other set operations over the vertex sets. The new solutions will preserve the desired attributes. The goal of defining an isomorphism based search mechanism is to construct predictors of evolution that can facilitate the automation of ’software factory’ paradigm. The model allows for automation via software tools implementing the concepts.

Predicting random effects with an expanded finite population mixed model

Prediction of random effects is an important problem with expanding applications. In the simplest context, the problem corresponds to prediction of the latent value (the mean) of a realized cluster selected via two-stage sampling. Recently, Stanek and Singer [Predicting random effects from finite population clustered samples with response error. J. Amer. Statist. Assoc. 99, 119-130] developed best linear unbiased predictors (BLUP) under a finite population mixed model that outperform BLUPs from mixed models and superpopulation models. Their setup, however, does not allow for unequally sized clusters. To overcome this drawback, we consider an expanded finite population mixed model based on a larger set of random variables that span a higher dimensional space than those typically applied to such problems. We show that BLUPs for linear combinations of the realized cluster means derived under such a model have considerably smaller mean squared error (MSE) than those obtained from mixed models, superpopulation models, and finite population mixed models. We motivate our general approach by an example developed for two-stage cluster sampling and show that it faithfully captures the stochastic aspects of sampling in the problem. We also consider simulation studies to illustrate the increased accuracy of the BLUP obtained under the expanded finite population mixed model. (C) 2007 Elsevier B.V. All rights reserved.