Relaxor Ferroelectric Behavior and Structural Aspects of SrNaBi2Nb3O12 Ceramics

The SrNaBi2Nb3O12 (SNBN) powder was prepared via the conventional solid-state reaction method. X-ray structural studies confirmed the phase to be a three-layered member of the Aurivillius family of oxides. The SNBN ceramics exhibited the typical characteristics of relaxor ferroelectrics, associated with broad and dispersive dielectric maxima. The variation of temperature of dielectric maxima (T-m) with frequency obeyed the Vogel-Fulcher relationship. Relaxor behavior was believed to be arising from the cationic disorder at A-site. Pinched ferroelectric hysteresis loops were observed well above T-m.

Structure and deformation correlation of closed-cell aluminium foam subject to uniaxial compression

We report the results of an experimental and numerical study conducted on a closed-cell aluminium foam that was subjected to uniaxial compression with lateral constraint. X-ray computed tomography was utilized to gain access into the three-dimensional (3-D) structure of the foam and some aspects of the deformation mechanisms. A series of advanced 3-D image analyses are conducted on the 3-D images aimed at characterizing the strain localization regions. We identify the morphological/geometrical features that are responsible for the collapse of the cells and the strain localization. A novel mathematical approach based on a Minkowski tensor analysis along with the mean intercept length technique were utilized to search for signatures of anisotropy across the foam sample and its evolution as a function of loading. Our results show that regions with higher degrees of anisotropy in the undeformed foam have a tendency to initiate the onset of cell collapse. Furthermore, we show that strain hardening occurs predominantly in regions with large cells and high anisotropy. We combine the finite element method with the tomographic images to simulate the mechanical response of the foam. We predict further deformation in regions where the foam is already deformed. Crown Copyright (C) 2012 Published by Elsevier Ltd. on behalf of Acta Materialia Inc. All rights reserved.

Fused azulenes as possible organic multiferroics

We present compelling theoretical results showing that fused azulene molecules are strong candidates for exhibiting room temperature multiferroic behavior, i.e., having both ferroelectric and ferromagnetic properties. If this is experimentally proved, these systems will be organic multiferroic materials with important potential applications.

Raman scattering, microstructural and dielectric studies on Ba1-xCaxBi4Ti4O15 ceramics

Polycrystalline powders of Ba1-xCaxBi4Ti4O15 (where x = 0, 0.25, 0.50, 0.75 and 1) were prepared via the conventional solid-state reaction route. X-ray diffraction (XRD) and Raman scattering techniques have been employed to probe into the structural changes on changing x. XRD analyses confirmed the formation of monophasic bismuth layered structure of all the above compositions with an increase in orthorhombic distortion with increase in x. Raman spectra revealed a redshift in A(1g) peak and an increase in the B-2g/B-3g splitting with increasing Ca content. The average grain size was found to increase with increasing x. The temperature of the maximum dielectric constant (T-m) increased linearly with increasing Ca-content whereas the diffuseness of the phase transition was found to decrease with the end member CaBi4Ti4O15 showing a frequency independent sharp phase transition around 1048 K. Ca doping resulted in a decrease in the remnant polarization and an increase in the coercive field. Ba0.75Ca0.25Bi4Ti4O15 ceramics showed an enhanced piezoelectric coefficient d(33) of 15 pC N-1 at room temperature. Low values of dielectric losses and tunability of temperature coefficient of dielectric constant (tau(epsilon)) in the present solid-solution suggest that these compounds can be of potential use in microwave dielectrics at high temperatures. (C) 2012 Elsevier B.V. All rights reserved.

Differential cellular recognition pattern to M. tuberculosis targets defined by IFN-gamma and IL-17 production in blood from TB plus patients from Honduras as compared to health care workers: TB and immune responses in patients from Honduras

Background: A better understanding of the quality of cellular immune responses directed against molecularly defined targets will guide the development of TB diagnostics and identification of molecularly defined, clinically relevant M.tb vaccine candidates. Methods: Recombinant proteins (n = 8) and peptide pools (n = 14) from M. tuberculosis (M.tb) targets were used to compare cellular immune responses defined by IFN-gamma and IL-17 production using a Whole Blood Assay (WBA) in a cohort of 148 individuals, i.e. patients with TB + (n = 38), TB- individuals with other pulmonary diseases (n = 81) and individuals exposed to TB without evidence of clinical TB (health care workers, n = 29). Results: M.tb antigens Rv2958c (glycosyltransferase), Rv2962c (mycolyltransferase), Rv1886c (Ag85B), Rv3804c (Ag85A), and the PPE family member Rv3347c were frequently recognized, defined by IFN-gamma production, in blood from healthy individuals exposed to M.tb (health care workers). A different recognition pattern was found for IL-17 production in blood from M.tb exposed individuals responding to TB10.4 (Rv0288), Ag85B (Rv1886c) and the PPE family members Rv0978c and Rv1917c. Conclusions: The pattern of immune target recognition is different in regard to IFN-gamma and IL-17 production to defined molecular M.tb targets in PBMCs from individuals frequently exposed to M.tb. The data represent the first mapping of cellular immune responses against M.tb targets in TB patients from Honduras.

Nonlinear dielectric response of BaBi4Ti4O15 ceramics

Nonlinear dielectric response of BaBi4Ti4O15 ceramics synthesized via the conventional solid-state reaction route has been monitored over a wide range of electric field strengths (E-0 = 0.5 - 5 kV/cm). Dielectric permittivity was found to increase linearly within the range of applied field. Rayleigh relations were employed to interpret the nonlinear dielectric response and the contribution of irreversible domain wall motion to the macroscopic permittivity was separated. The values of room temperature Rayleigh dielectric coefficient (alpha) and relative initial permittivity (epsilon'(init)) were found to be 2.28 +/- 0.02 cm/kV and 146.10 +/- 0.07, respectively. A reasonable agreement between the simulated and measured polarization-electric field (P-E) hysteresis loops was observed at an applied electric field of 5 kV/cm.

Li3MRuO5 (M = Co, Ni), new lithium-rich layered oxides related to LiCoO2: promising electrochemical performance for possible application as cathode materials in lithium ion batteries

We describe the synthesis and crystal structure of Li3MRuO5 (M = Co and Ni), new rock salt related oxides. Both the oxides crystallize in the layered LiCoO2 (alpha-NaFeO2) structure, as revealed by powder XRD data. Magnetic susceptibility data suggest that the oxidation states of transition metals are Li3Co3+(ls)Ru4+(ls) O-5 (ls = low spin) for the M = Co compound and Li3Ni2+Ru5+O5 for the M = Ni compound. Electrochemical investigations of lithium deintercalation-intercalation behaviour reveal that both Co and Ni phases exhibit attractive specific capacities of ca. 200 mA h g(-1) at an average voltage of 4 V that has been interpreted as due to the oxidation of Co3+ and Ru4+ in Li3CoRuO5 and Ni2+ to Ni4+ in the case of Li3NiRuO5. Thus, a different role of Ru ions is played in the isostructural oxides. Finally, in both cases evidence of irreversible behaviour above 4.2 V is observed and interpreted as formation of high valent ions or alternatively oxidation of oxide ions.

New rock salt-related oxides Li3M2RuO6 (M=Co, Ni): Synthesis, structure, magnetism and electrochemistry

We describe the synthesis, crystal structure, magnetic and electrochemical characterization of new rock salt-related oxides of formula, Li3M2RuO6 (M=Co, Ni). The M=Co oxide adopts the LiCoO2 (R-3m) structure, where sheets of LiO6 and (Co-2/Ru)O-6 octahedra are alternately stacked along the c-direction. The M=Ni oxide also adopts a similar layered structure related to Li2TiO3, where partial mixing of Li and Ni/Ru atoms lowers the symmetry to monoclinic (C2/c). Magnetic susceptibility measurements reveal that in Li3Co2RuO6, the oxidation states of transition metal ions are Co3+ (S=0), Co2+ (S=1/2) and Ru4+ (S=1), all of them in low-spin configuration and at 10 K, the material orders antiferromagnetically. Analogous Li3Ni2RuO6 presents a ferrimagnetic behavior with a Curie temperature of 100 K. The differences in the magnetic behavior have been explained in terms of differences in the crystal structure. Electrochemical studies correlate well with both magnetic properties and crystal structure. Li-transition metal intermixing may be at the origin of the more impeded oxidation of Li3Ni2RuO6 when compared to Li3CO2RuO6. Interestingly high first charge capacities (between ca. 160 and 180 mAh g(-1)) corresponding to ca. 2/3 of theoretical capacity are reached albeit, in both cases, capacity retention and cyclability are not satisfactory enough to consider these materials as alternatives to LiCoO2. (C) 2013 Elsevier Inc. All rights reserved.

Oxygen-participated electrochemistry of new lithium-rich layered oxides Li3MRuO5 M = Mn, Fe)

We describe the synthesis, crystal structure and lithium deinsertion-insertion electrochemistry of two new lithium-rich layered oxides, Li3MRuO5 (M = Mn, Fe), related to rock salt based Li2MnO3 and LiCoO2. The Li3MnRuO5 oxide adopts a structure related to Li2MnO3 (C2/m) where Li and (Li0.2Mn0.4Ru0.4) layers alternate along the c-axis, while the Li3FeRuO5 oxide adopts a near-perfect LiCoO2 (R (3) over barm) structure where Li and (Li0.2Fe0.4Ru0.4) layers are stacked alternately. Magnetic measurements indicate for Li3MnRuO5 the presence of Mn3+ and low spin configuration for Ru4+ where the itinerant electrons occupy a pi*-band. The onset of a net maximum in the chi vs. T plot at 9.5 K and the negative value of the Weiss constant (theta) of -31.4 K indicate the presence of antiferromagnetic superexchange interactions according to different pathways. Lithium electrochemistry shows a similar behaviour for both oxides and related to the typical behaviour of Li-rich layered oxides where participation of oxide ions in the electrochemical processes is usually found. A long first charge process with capacities of 240 mA h g(-1) (2.3 Li per f.u.) and 144 mA h g(-1) (1.38 Li per f.u.) is observed for Li3MnRuO5 and Li3FeRuO5, respectively. An initial sloping region (OCV to ca. 4.1 V) is followed by a long plateau (ca. 4.3 V). Further discharge-charge cycling points to partial reversibility (ca. 160 mA h g(-1) and 45 mA h g(-1) for Mn and Fe, respectively). Nevertheless, just after a few cycles, cell failure is observed. X-ray photoelectron spectroscopy (XPS) characterisation of both pristine and electrochemically oxidized Li3MRuO5 reveals that in the Li3MnRuO5 oxide, Mn3+ and Ru4+ are partially oxidized to Mn4+ and Ru5+ in the sloping region at low voltage, while in the long plateau, O2- is also oxidized. Oxygen release likely occurs which may be the cause for failure of cells upon cycling. Interestingly, some other Li-rich layered oxides have been reported to cycle acceptably even with the participation of the O2- ligand in the reversible redox processes. In the Li3FeRuO5 oxide, the oxidation process appears to affect only Ru (4+ to 5+ in the sloping region) and O2- (plateau) while Fe seems to retain its 3+ state.

An estimate of the number of tropical tree species

The high species richness of tropical forests has long been recognized, yet there remains substantial uncertainty regarding the actual number of tropical tree species. Using a pantropical tree inventory database from closed canopy forests, consisting of 657,630 trees belonging to 11,371 species, we use a fitted value of Fisher's alpha and an approximate pantropical stem total to estimate the minimum number of tropical forest tree species to fall between similar to 40,000 and similar to 53,000, i.e., at the high end of previous estimates. Contrary to common assumption, the Indo-Pacific region was found to be as species-rich as the Neotropics, with both regions having a minimum of similar to 19,000-25,000 tree species. Continental Africa is relatively depauperate with a minimum of similar to 4,500-6,000 tree species. Very few species are shared among the African, American, and the Indo-Pacific regions. We provide a methodological framework for estimating species richness in trees that may help refine species richness estimates of tree-dependent taxa.

The mycobacterial iron-dependent regulator IdeR induces ferritin (bfrB) by alleviating Lsr2 repression

Emerging evidence indicates that precise regulation of iron (Fe) metabolism and maintenance of Fe homeostasis in Mycobacterium tuberculosis (Mtb) are essential for its survival and proliferation in the host. IdeR is a central transcriptional regulator of Mtb genes involved in Fe metabolism. While it is well understood how IdeR functions as a repressor, how it induces transcription of a subset of its targets is still unclear. We investigated the molecular mechanism of IdeR-mediated positive regulation of bfrB, the gene encoding the major Fe-storage protein of Mtb. We found that bfrB induction by Fe required direct interaction of IdeR with a DNA sequence containing four tandem IdeR-binding boxes located upstream of the bfrB promoter. Results of in vivo and in vitro transcription assays identified a direct repressor of bfrB, the histone-like protein Lsr2. IdeR counteracted Lsr2-mediated repression in vitro, suggesting that IdeR induces bfrB transcription by antagonizing the repressor activity of Lsr2. Together, these results elucidate the main mechanism of bfrB positive regulation by IdeR and identify Lsr2 as a new factor contributing to Fe homeostasis in mycobacteria.

Determinacion de frecuencia de politraumatismo oseo (ptos) en mascotas caninas en el hospital animal El Dorado

Ante la falta de información acerca de la frecuencia, diagnóstico, tratamiento y primeros auxilios de la mascota canina politraumatizada en nuestro país, y la falta de medios para la praxis ortopédica, se propuso este estudio de tesis; cuyo titulo es: Determinación de frecuencia de politraumatismo óseo con diagnostico radiológico en mascotas caninas en el Hospital Animal El Dorado. Para lo cual se procedió a establecer los siguientes objetivos: la evaluación de la frecuencia de politraumatismos óseos (PTO) atendidos en la clínica veterinaria El Dorado con diagnostico radiológico, para esto se realizó dicho estudio en un periodo de 3 meses, en el cual se estudiaron expedientes y recopilación de datos, con este estudio de tesis se logró comprobar que la mayor afectación por fracturas la sufren los canes de raza criolla, seguidos por los Pastores Alemanes, así mismo se determinó que el manejo de las mascotas es determinante y predisponente a que una mascota sufra una fractura. Se identificó que los animales menores de 2 años sufren mayormente fracturas. Se concluyó que debido a los altos costos de la praxis, muchos veterinarios no atienden a sus pacientes y también debido a la misma razón muchos dueños de mascotas optan por la eutanasia o simplemente dejan que el tiempo repare las fracturas. Este estudio pretende ser una herramienta que permita al estudiante de Medicina Veterinaria tener un mayor entendimiento acerca de los politraumatismos. Para el profesional una referencia. Se concluyó que la raza y edad de las mascotas, así mismo, como la época del año (invierno) son factores determinantes en el surgimiento de Politraumatismo óseo, los cuales se localizan con mayor frecuencia en mascotas a nivel cubito/radio, fémur, tibia y peroné, la terapia mayormente utilizada fue la conservadora mediante el uso de férulas seguida de la quirúrgica con el uso de cerclaje.

Aplicacion de histovacuna para el tratamiento de papilomatosis bovina en el municipio de Nueva Guinea, departamento de la RAAS

El presente estudio se realizó, con el objetivo de Evaluar la Aplicación de histovacuna para el tratamiento de Papilomatosis Bovina en la finca San José ubicada en la Colonia, Talolinga del municipio de Nueva Guinea, Departamento de la RAAS. La ubicación topográfica es la siguiente: 11º 52' 10" latitud norte y 84º 27' longitud oeste, El clima del municipio se encuentra dentro de la denominación genérica de selva tropical. La precipitación promedio anual es de 1,000 milímetros y alturas de 220 msnm. La temperatura promedio es de 25 °C, oscilando entre 28 °C y 30 °C. La Humedad Relativa Promedio Anual es de 85% y varía entre 80% y 90%. Se utilizó un diseño completamente al azar (D.C.A) el que esta compuesto por un lote de 21 Bovinos, divididos en 3 grupos, cada grupo formado por 7 Bovinos, seleccionadas al azar y sometidas a tratamientos distintos. Tratamiento I:Histovacuna 1 Dosis (HVC1) Tratamiento II: Histovacuna 2 Dosis (HVC2) y Tratamiento III: Verrugal (25g Clorobutanol). Hubo un promedio de alrededor de 9 a 7 lesiones por animal, lo que no coincide con Morter y Horstman (1992). Se comprobó que la distribución de las lesiones papilomatosas eran fundamentalmente en la región de la cabeza y cuello; coincidiendo así con Howley et al (1986), dichas lesiones oscilaban entre 1 y 2.5 cm diámetro, las mismas se hallaban presente hacía mas de 6 meses. Luego de aplicado los tratamiento las verrugas comenzaron a desaparecer a partir de los 17 días en lo adelante, siendo significativo los mayores efectos de recuperación en aquellas lesiones de mayor talla. A los 90 días de haber aplicado los tratamientos se encontraban todos los animales recuperados. Podemos decir que no es necesario repetir la dosis de histovacuna porque con una sola dosis realiza el mismo efecto de recuperación.

Efecto de diferentes proporciones de caña de azucar (Saccharum officinarum), pasto Taiwan (Pennisetum purpureum) y melaza sobre la composicion quimica del ensilaje de marango (Moringa oleifera)

El presente estudio se realizó en la finca “Santa Rosa” propiedad de la Universidad Nacional Agraria, localizada geográficamente a los 12°08’15’’ latitud Norte y a los 86°09’36’’ longitud Este, en el departamento de Managua. El objetivo fue evaluar el efecto de diferentes proporciones de caña de azúcar (Sacharum officinarum), pasto Taiwán (Pennisetum purpureum) y melaza sobre la composición química y microbiológica del ensilaje de Marango (Moringa oleífera). Se utilizaron 14 tratamientos con tres repeticiones cada uno para un total de 42 microsilos distribuidos en un Diseño Completamente al Azar, donde se evaluó Marango en proporciones de 31.66, 33.00, 33.33, 63.33, 66.00, 66.66, 95.00 y 99.00%, Taiwán en las mismas proporciones, Caña de azúcar en proporciones de 33.33, 66.33 y 100%, y la melaza en proporción de 1 y 5%. Las variables evaluadas fueron: Composición química (Materia seca, Proteína cruda, Cenizas, FDN, FDA, Hemicelulosa, contenido de azucares), Perfil de fermentación (pH, Acido láctico, Acido acético) y Composición microbiana (Lactobacilos, Clostridios y Enterobacterias). Se realizó Análisis de Varianza y comparaciones de medias con la Prueba de Tukey 5% utilizando MINITAB, versión 12.0. Los resultados de los análisis de varianza (P<0,05) mostraron que el mayor contenido de MS lo obtuvo el T2 (T95Mz5) con 26.89%, de PC el T7 (M99Mz1) con 15.04%, de CEN el T2 (T95Mz5) con 2.83%, de FDN el T13 (T66C34) con 77.55%, de FDA el T4 (M32T63Mz5) con 45.18%, de Hemicelulosa el T13 (T66C34) con 40.08%, el menor contenido de pH el T6 (M64T32Mz5) con 3.49 y los mayores contenidos de Acido Láctico el T8 (M95Mz5) con 51.60 mg/kg de MS, de Acido Acético el T7 (M99Mz1) con 31.10 mg/kg de MS, de Lactobacilos el T13 (T66C34) con 6.49 log UFC/g de MS y de Clostridios el T14 (T34C66) con 4.41 log UFC/g de MS. En conclusión todos los ensilados donde se incluyó Marango presentaron resultados similares en la mayoría de los parámetros químicos, sin embargo los tratamientos 7 y 8 presentaron las mejores características nutritivas, siendo una opción nutricional viable para el productor.

Evaluación productiva en gallinas de patio alimentadas con tres tipos de raciones caseras bajo condiciones de libertad, en la comunidad Los Angeles, Malacatoya, municipio de Granada

Este estudio evaluó la productividad en gallinas de patio, alimentadas con tres tipos de raciones caseras bajo condiciones de libertad, en la comunidad Los Ángeles, Malacatoya, municipio de Granada, en el período de Noviembre 2009 a Febrero 2010. Esta comunidad se localiza geográficamente a 11o55’ latitud Norte y 86o57’ longitud Oeste. Se seleccionaron 12 familias bajo criterios previos, principalmente anuencia y disponibilidad de 5 gallinas por familia, durante un período de 18 semanas, las que debían alimentar con 3 diferentes raciones caseras formuladas para tal fin (Tratamiento 1, Tratamiento 2, Tratamiento 3). Se efectuó talleres de capacitación con las participantes en aspectos como construcción de gallineros, elaboración de concentrado utilizando ingredientes de la zona, vacunación y curación con medicina alternativa. Para el procesamiento e interpretación de los datos se realizó un DCA, teniendo como única fuente de variación no aleatoria las raciones, con dos bases de datos (A y B) utilizando el programa estadístico SAS (versión 8 1999). Las variables evaluadas fueron peso de la gallina, GMD, cantidad y peso del huevo a una muestra de 60 gallinas. En la base de datos A, el peso mayor de la gallina, lo obtuvo el T3 con un valor de 1,930 g/ave, en cuanto a la GMD, el máximo valor se logró en el T2 con 5 g/día. En la base de datos B, el peso de la gallina reflejó su mayor valor en el T3 con 1,940 g/ave, en cuanto a GMD fue mayor en el T2 con 4 g/día. La mayor cantidad de huevos obtenida fue en el T2 con 5 huevos/ave/sem, así como el mayor peso del huevo con 49.9 g.