Avaliação de fatores determinantes e da taxa de incidência da condição DFD (Dark, Firm, Dry) na carne de bovinos abatidos no matadouro da ilha Terceira

Dissertação de Mestrado, Engenharia Zootécnica, 13 de Junho de 2014, Universidade dos Açores.

A novel cyclosporin a aqueous formulation for dry eye treatment: in vitro and in vivo evaluation.

PURPOSE: The aim of the present study was the in vitro and in vivo evaluation of a novel aqueous formulation based on polymeric micelles for the topical delivery of cyclosporine A for dry eye treatment. METHODS: In vitro experiments were carried out on primary rabbit corneal cells, which were characterized by immunocytochemistry using fluorescein-labeled lectin I/isolectin B4 for the endothelial cells and mouse monoclonal antibody to cytokeratin 3+12 for the epithelial ones. Living cells were incubated for 1 hour or 24 hours with a fluorescently labeled micelle formulation and analyzed by fluorescence microscopy. In vivo evaluations were done by Schirmer test, osmolarity measurement, CyA kinetics in tears, and CyA ocular distribution after topical instillation. A 0.05% CyA micelle formulation was compared to a marketed emulsion (Restasis). RESULTS: The in vitro experiments showed the internalization of micelles in the living cells. The Schirmer test and osmolarity measurements demonstrated that micelles did not alter the ocular surface properties. The evaluation of the tear fluid gave similar CyA kinetics values: AUC = 2339 ± 1032 min*μg/mL and 2321 ± 881.63; Cmax = 478 ± 111 μg/mL and 451 ± 74; half-life = 36 ± 9 min and 28 ± 9 for the micelle formulation and Restasis, respectively. The ocular distribution investigation revealed that the novel formulation delivered 1540 ± 400 ng CyA/g tissue to the cornea. CONCLUSIONS: The micelle formulation delivered active CyA into the cornea without evident negative influence on the ocular surface properties. This formulation could be applied for immune-related ocular surface diseases.

Port Weller Dry Docks Limited fonds, 1948-1986, n.d. (non-inclusive)

This archive contains materials relating to the Port Weller Dry Docks Limited. The bulk of the materials are correspondence. The collection also includes biographical information, photographs and media releases. The materials have been kept in original order, except where noted. The fonds contains materials relating to Port Weller Dry Docks Limited. The materials included correspondence, photographs, media releases including clippings, photographs and some biographical information. Also included are brochures and programs from ship christenings.

Port Weller Dry Docks collection, 1959-1967

Port Weller Dry Docks Limited was officially established on April 25, 1946, near Lock 1 of the Welland Canal. Charles A. Ansell was the company’s first President and General Manager. Initially, the company focused on repairing ships, but in June, 1951, built their first ship, the Scott Misener. In 1956, the Upper Lakes and St. Lawrence Transportation Co. purchased all of the shares of Port Weller Dry Docks Limited. In the mid-eighties, ULS (Upper Lakes Shipping) International (which owned the Port Weller dry docks), and Canada Steamship Lines, merged their operations. As a result, the Port Weller Dry Docks became a division of this newly formed company, known as Canadian Shipbuilding and Engineering Limited. In 2007, Seaway Marine & Industrial Inc. took over ownership of the Port Weller Dry Docks, but declared bankruptcy in July 2013.

Letter with the letterhead “John I. Mackenzie and Co. Importers of Dry Goods” to S.D. Woodruff from John I. Mackenzie

Letter with the letterhead “John I. Mackenzie and Co. Importers of Dry Goods” to S.D. Woodruff from John I. Mackenzie stating that he omitted to consult with Mr. Woodruff regarding funds to pay some of the contractors (2 pages, handwritten), July 8, 1875.

Receipt from McLaren and Co., St. Catharines, Importers of Dry Goods, Millinery etc

Receipt from McLaren and Co., St. Catharines, Importers of Dry Goods, Millinery etc., for clothing and repairs to clothing, Aug. 14, 1886.

Receipt from Adam, Meldrum and Anderson Dry Goods and Carpets

Receipt from Adam, Meldrum and Anderson Dry Goods and Carpets, Buffalo, New York for curtains, materials and hooks, Sept. 6, 1886.

Receipt from Henry Carlisle, Importer of Dry Goods and Millinery, St. Catharines for hats

Receipt from Henry Carlisle, Importer of Dry Goods and Millinery, St. Catharines for hats, Dec. 31, 1886.

Receipt from The Big 22, Dry Goods, Millinery and Mantles, St. Catharines

Receipt from The Big 22, Dry Goods, Millinery and Mantles, St. Catharines for payment on account, Jan26, 1887.

Natural air conditioning, traditions and trends : high performance of sustainable indoor ventilation in a hot and dry climate

De nos jours, l'utilisation accrue de combustibles à base de fossiles et l'électricité met en péril l'environnement naturel à cause des niveaux élevés de pollution. Il est donc plausible de prévoir des économies d'énergie significatives grâce à la climatisation dite «naturelle»». En accord avec les objectifs acceptés à l'échelle internationale d'une architecture «verte» et durable, l'utilisation de cours intérieures associées aux capteurs de vent, aux murs-Trombe et à d'autres systèmes de climatisation naturelle (aussi bien traditionnels que nouveaux), paraît prometteuse. Ce mémoire propose une analyse de nouvelles approches à la climatisation naturelle et à la production d'air frais avec une consommation minimale d'énergie, eu égard aux traditions et aux tendances, en particulier dans les zones climatiques chaudes et sèches comme l'Iran. Dans ce contexte, regarder l'architecture de l'Islam et la discipline du Qur'an paraissent offrir un guide pour comprendre l'approche musulmane aux processus de décision en design. Nous regardons donc les traditions et les tendances en ce qui concerne la climatisation naturelle à travers l'élément le plus important du contexte islamique, à savoir le Qur'an. C'est pourquoi, à l'intérieur du thème de la tradition, nous avons pris en compte quelques considérations concernant l'influence de l'Islam, et en particulier le respect de la nature associé à un équilibre entre l'harmonie et l'individualité. Ce sont autant de facteurs qui influencent la prise de décisions visant à résoudre des problèmes scientifiques majeurs selon la philosophie et les méthodes islamiques ; ils nous permettent de faire quelques recommandations. La description des principes sous-jacents aux capteurs à vent et des antécédents trouvés dans la nature tels que les colonies de termites, est présentée également. Sous la rubrique tendances, nous avons introduit l'utilisation de matériaux et de principes de design nouveaux. Regarder simultanément ces matériaux nouveaux et l'analogie des colonies de termites suggère de bonnes approches à la conception d'abris pour les victimes de tremblements de terre dans les régions sisimques. Bam, une ville iranienne, peut être considérée comme un exemple spécifique illustrant où les principes exposés dans ce mémoire peuvent s'appliquer le plus adéquatement.

Systématique et biogéographie du groupe Caesalpinia (famille Leguminosae)

Parmi les lignées des Caesalpinioideae (dans la famille des Leguminosae), l’un des groupes importants au sein duquel les relations phylogénétiques demeurent nébuleuses est le « groupe Caesalpinia », un clade de plus de 205 espèces, réparties présentement entre 14 à 21 genres. La complexité taxonomique du groupe Caesalpinia provient du fait qu’on n’arrive pas à résoudre les questions de délimitations génériques de Caesalpinia sensu lato (s.l.), un regroupement de 150 espèces qui sont provisoirement classées en huit genres. Afin d’arriver à une classification générique stable, des analyses phylogénétiques de cinq loci chloroplastiques et de la région nucléaire ITS ont été effectuées sur une matrice comportant un échantillonnage taxonomique du groupe sans précédent (~84% des espèces du groupe) et couvrant la quasi-totalité de la variation morphologique et géographique du groupe Caesalpinia. Ces analyses ont permis de déterminer que plusieurs genres du groupe Caesalpinia, tels que présentement définis, sont polyphylétiques ou paraphylétiques. Nous considérons que 26 clades bien résolus représentent des genres, et une nouvelle classification générique du groupe Caesalpinia est proposée : elle inclut une clé des genres, une description des 26 genres et des espèces acceptées au sein de ces groupes. Cette nouvelle classification maintient l’inclusion de douze genres (Balsamocarpon, Cordeauxia, Guilandina, Haematoxylum, Hoffmanseggia, Lophocarpinia, Mezoneuron, Pomaria, Pterolobium, Stenodrepanum, Stuhlmannia, Zuccagnia) et en abolit deux (Stahlia et Poincianella). Elle propose aussi de réinstaurer deux genres (Biancaea et Denisophytum), de reconnaître cinq nouveaux genres (Arquita, Gelrebia, Hererolandia, Hultholia et Paubrasilia), et d’amender la description de sept genres (Caesalpinia, Cenostigma, Coulteria, Erythrostemon, Libidibia, Moullava, Tara). Les résultats indiquent qu’il y aurait possiblement aussi une 27e lignée qui correspondrait au genre Ticanto, mais un échantillonage taxonomique plus important serait nécéssaire pour éclaircir ce problème. Les espèces du groupe Caesalpinia ont une répartition pantropicale qui correspond presque parfaitement aux aires du biome succulent, mais se retrouvent aussi dans les déserts, les prairies, les savanes et les forêts tropicales humides. À l’échelle planétaire, le biome succulent consiste en une série d’habitats arides ou semi-arides hautement fragmentés et caractérisés par l’absence de feu, et abrite souvent des espèces végétales grasses, comme les Cactacées dans les néo-tropiques et les Euphorbiacées en Afrique. L’histoire biogéographique du groupe Caesalpinia a été reconstruite afin de mieux comprendre l’évolution de la flore au sein de ce biome succulent. Ce portrait biogéographique a été obtenu grâce à des analyses de datations moléculaires et des changements de taux de diversification, à une reconstruction des aires ancestrales utilisant le modèle de dispersion-extinction-cladogenèse, et à la reconstruction de l’évolution des biomes et du port des plantes sur la phylogénie du groupe Caesalpinia. Ces analyses démontrent que les disjonctions trans-continentales entre espèces sœurs qui appartiennent au même biome sont plus fréquentes que le nombre total de changements de biomes à travers la phylogénie, suggérant qu’il y a une forte conservation de niches, et qu’il est plus facile de bouger que de changer et d’évoluer au sein d’un biome différent. Par ailleurs, contrairement à nos hypothèses initiales, aucun changement de taux de diversification n’est détecté dans la phylogénie, même lorsque les espèces évoluent dans des biomes différents ou qu’il y a changement de port de la plante, et qu’elle se transforme, par exemple, en liane ou herbacée. Nous suggérons que même lorsqu’ils habitent des biomes très différents, tels que les savanes ou les forêts tropicales humides, les membres du groupe Caesalpinia se retrouvent néanmoins dans des conditions écologiques locales qui rappellent celles du biome succulent. Finalement, bien que la diversité des espèces du biome succulent ne se compare pas à celle retrouvée dans les forêts tropicales humides, ce milieu se distingue par un haut taux d’espèces endémiques, réparties dans des aires disjointes. Cette diversité spécifique est probablement sous-estimée et mérite d’être évaluée attentivement, comme en témoigne la découverte de plusieurs nouvelles espèces d’arbres et arbustes de légumineuses dans la dernière décennie. Le dernier objectif de cette thèse consiste à examiner les limites au niveau spécifique du complexe C. trichocarpa, un arbuste des Andes ayant une population disjointe au Pérou qui représente potentiellement une nouvelle espèce. Des analyses morphologiques et moléculaires sur les populations présentes à travers les Andes permettent de conclure que les populations au Pérou représentent une nouvelle espèce, qui est génétiquement distincte et comporte des caractéristiques morphologiques subtiles permettant de la distinguer des populations retrouvées en Argentine et en Bolivie. Nous décrivons cette nouvelle espèce, Arquita grandiflora, dans le cadre d’une révision taxonomique du genre Arquita, un clade de cinq espèces retrouvées exclusivement dans les vallées andines.

Design and Development of Instrumentation Systems to determine the Dry Rubber Content in Natural Rubber Latex

Hevea latex is a natural biological liquid of very complex composition .Besides rubber hydrocarbons,it contains many proteinous and resinous substances,carbohydrates,inorganic matter,water,and others.The Dry Rubber Content (DRC) of latex varies according to season, tapping system,weather,soil conditions ,clone,age of the tree etc. The true DRC of the latex must be determined to ensure fair prices for the latex during commercial exchange.The DRC of Hevea latex is a very familiar term to all in the rubber industry.It has been the basis for incentive payments to tappers who bring in more than the daily agreed poundage of latex.It is an important parameter for rubber and latex processing industries for automation and verious decesion making processes.This thesis embodies the efforts made by me to determine the DRC of rubber latex following different analytical tools such as MIR absorption,thermal analysis.dielectric spectroscopy and NIR reflectance.The rubber industry is still Looking for a compact instrument that is accurate economical,easy to use and environment friendly.I hope the results presented in this thesis will help to realise this goal in the near future.

A Study of Single Stage Semi‐Dry Anaerobic Digestion of Organic Fraction of Municipal Solid Waste

Solid waste generation is a natural consequence of human activity and is increasing along with population growth, urbanization and industrialization. Improper disposal of the huge amount of solid waste seriously affects the environment and contributes to climate change by the release of greenhouse gases. Practicing anaerobic digestion (AD) for the organic fraction of municipal solid waste (OFMSW) can reduce emissions to environment and thereby alleviate the environmental problems together with production of biogas, an energy source, and digestate, a soil amendment. The amenability of substrate for biogasification varies from substrate to substrate and different environmental and operating conditions such as pH, temperature, type and quality of substrate, mixing, retention time etc. Therefore, the purpose of this research work is to develop feasible semi-dry anaerobic digestion process for the treatment of OFMSW from Kerala, India for potential energy recovery and sustainable waste management. This study was carried out in three phases in order to reach the research purpose. In the first phase, batch study of anaerobic digestion of OFMSW was carried out for 100 days at 32°C (mesophilic digestion) for varying substrate concentrations. The aim of this study was to obtain the optimal conditions for biogas production using response surface methodology (RSM). The parameters studied were initial pH, substrate concentration and total organic carbon (TOC). The experimental results showed that the linear model terms of initial pH and substrate concentration and the quadratic model terms of the substrate concentration and TOC had significant individual effect (p < 0.05) on biogas yield. However, there was no interactive effect between these variables (p > 0.05). The optimum conditions for maximizing the biogas yield were a substrate concentration of 99 g/l, an initial pH of 6.5 and TOC of 20.32 g/l. AD of OFMSW with optimized substrate concentration of 99 g/l [Total Solid (TS)-10.5%] is a semi-dry digestion system .Under the optimized condition, the maximum biogas yield was 53.4 L/kg VS (volatile solid).. In the second phase, semi-dry anaerobic digestion of organic solid wastes was conducted for 45 days in a lab-scale batch experiment for substrate concentration of 100 g/l (TS-11.2%) for investigating the start-up performances under thermophilic condition (50°C). The performance of the reactor was evaluated by measuring the daily biogas production and calculating the degradation of total solids and the total volatile solids. The biogas yield at the end of the digestion was 52.9 L/kg VS for the substrate concentration of 100 g/l. About 66.7% of volatile solid degradation was obtained during the digestion. A first order model based on the availability of substrate as the limiting factor was used to perform the kinetic studies of batch anaerobic digestion system. The value of reaction rate constant, k, obtained was 0.0249 day-1. A laboratory bench scale reactor with a capacity of 36.8 litres was designed and fabricated to carry out the continuous anaerobic digestion of OFMSW in the third phase. The purpose of this study was to evaluate the performance of the digester at total solid concentration of 12% (semi-dry) under mesophlic condition (32°C). The digester was operated with different organic loading rates (OLRs) and constant retention time. The performance of the reactor was evaluated using parameters such as pH, volatile fatty acid (VFA), alkalinity, chemical oxygen demand (COD), TOC and ammonia-N as well as biogas yield. During the reactor’s start-up period, the process is stable and there is no inhibition occurred and the average biogas production was 14.7 L/day. The reactor was fed in continuous mode with different OLRs (3.1,4.2 and 5.65 kg VS/m3/d) at constant retention time of 30 days. The highest volatile solid degradation of 65.9%, with specific biogas production of 368 L/kg VS fed was achieved with OLR of 3.1 kg VS/m3/d. Modelling and simulation of anaerobic digestion of OFMSW in continuous operation is done using adapted Anaerobic Digestion Model No 1 (ADM1).The proposed model, which has 34 dynamic state variables, considers both biochemical and physicochemical processes and contains several inhibition factors including three gas components. The number of processes considered is 28. The model is implemented in Matlab® version 7.11.0.584(R2010b). The model based on adapted ADM1 was tested to simulate the behaviour of a bioreactor for the mesophilic anaerobic digestion of OFMSW at OLR of 3.1 kg VS/m3/d. ADM1 showed acceptable simulating results.

Hyperspectral field measurements to determine dry matter yield and nutritive value of legume-grass swards

Summary: Productivity, botanical composition and forage quality of legume-grass swards are important factors for successful arable farming in both organic and conventional farming systems. As these attributes can vary considerably within a field, a non-destructive method of detection while doing other tasks would facilitate a more targeted management of crops, forage and nutrients in the soil-plant-animal system. This study was undertaken to explore the potential of field spectral measurements for a non destructive prediction of dry matter (DM) yield, legume proportion in the sward, metabolizable energy (ME), ash content, crude protein (CP) and acid detergent fiber (ADF) of legume-grass mixtures. Two experiments were conducted in a greenhouse under controlled conditions which allowed collecting spectral measurements which were free from interferences such as wind, passing clouds and changing angles of solar irradiation. In a second step this initial investigation was evaluated in the field by a two year experiment with the same legume-grass swards. Several techniques for analysis of the hyperspectral data set were examined in this study: four vegetation indices (VIs): simple ratio (SR), normalized difference vegetation index (NDVI), enhanced vegetation index (EVI) and red edge position (REP), two-waveband reflectance ratios, modified partial least squares (MPLS) regression and stepwise multiple linear regression (SMLR). The results showed the potential of field spectroscopy and proved its usefulness for the prediction of DM yield, ash content and CP across a wide range of legume proportion and growth stage. In all investigations prediction accuracy of DM yield, ash content and CP could be improved by legume-specific calibrations which included mixtures and pure swards of perennial ryegrass and of the respective legume species. The comparison between the greenhouse and the field experiments showed that the interaction between spectral reflectance and weather conditions as well as incidence angle of light interfered with an accurate determination of DM yield. Further research is hence needed to improve the validity of spectral measurements in the field. Furthermore, the developed models should be tested on varying sites and vegetation periods to enhance the robustness and portability of the models to other environmental conditions.