924 resultados para MICROPYLAR ENDOSPERM TIP
Resumo:
This paper deals with the genetic interaction of Yl Y3 Y7 in producing yellow endosperm in maize. The new data presented are in accordance with preliminary notes on the same subject. The recessive yl, y3 and y7produce respectively green plants, albescent plants and white seedlings.
Resumo:
The genus Homodiaetus Eigenmann & Ward, 1907 is revised and four species are recognized. Its distribution is restricted to southeastern South America, from Uruguay to Paraguay river at west to the coastal drainages of Rio de Janeiro State, Brazil. Homodiaetus is currently distinguished from other genus of Stegophilinae by the combination of the following characters: origin of ventral-fin at midlength between the snout tip and the caudal-fin origin; opercle with three or more odontodes; and gill membranes confluent with the istmus. Homodiaetus anisitsi Eigenmann & Ward, 1907, is diagnosed by the caudal-fin with black middle rays, margin of upper and lower procurrent caudal-fin rays with dark stripes extending to the caudal-fin, and 3-6 opercular odontodes; H. passarellii (Ribeiro, 1944) with 6-7 opercular odontodes, 21-24 lower procurrent caudal-fin rays and 23-26 upper procurrent caudal-fin rays; H. banguela sp. nov. with 9 opercular odontodes, 17-19 lower procurrent caudal-fin rays, 17-22 upper procurrent caudal-fin rays, reduction of fourth pharyngobranchial with only three teeth and untoothed fifth ceratobranchial; and H. graciosa sp. nov. with 5-6 dentary rows, 7-9 opercular odontodes and 16-23 upper procurrent caudal-fin rays.
Resumo:
We describe the mating behavior of Adelosgryllus rubricephalus Mesa & Zefa, 2004. In trials carried out in laboratory we verified the following mating sequence: (1) sexual recognition by antennation; (2) courtship with male turning his abdomen towards the female, performing mediolateral antennae vibration, jerking its body antero-posteriorly and stridulating intermittently, while receptive female drums on the male's abdomen tip, cerci and hind-tibia with her palpi or foretarsi; the male then stops and stays motionless for some seconds, extrudes the spermatophore and both restart the behavioral sequence described above; (3) copulation: male underneath female; with his tegmina inclined forward, and joins his genitalia to the female's to promote sperm transference ; the female steps off the male, occurring a brief end-to-end position; (4) postcopulation: without guarding behavior; male retains the spermatophore and eats it. We quantified elapsed time of each behavioral sequence and discussed its implications in the observed mating behavior.
Resumo:
A new species of Tmesiphantes Simon, 1892, T. aridai sp. nov., is described and illustrated based on three males and three females collected at the Floresta Nacional do Tapajós, Santarém, state of Pará, Brazil. Males can be distinguished from T. perp Guadanucci & Silva, 2012 by the palpal bulb with an inconspicous tegular basal projection, but presenting a very slender embolus with shorter keels not extending to the tip, and from T. nubilus Simon, 1892 by the tibial apophysis with two similarly sized branches, the prolateral one with a strong spine on the retrolateral margin. Females resemble T. nubilus by the aspect of the seminal receptacle but the constriction near the apex is less evident and apex shape is irregular. The new species represents the first record of Tmesiphantes from the Amazonian region, bringing the total number of species to eight.
Resumo:
ABSTRACT A new species of Phrixotrichus Simon, 1889, P. pucara sp. nov., is described and illustrated based on a male from Pucará river, Neuquén province, Argentina. Male can be distinguished from all other species of the genus by the presence of a long strong spine on inner face of prolateral branch of tibial apophysis; also, it differs from P. scrofa (Molina, 1788) and P. vulpinus (Karsch, 1880) by a serrated prolateral keel of the male palpal bulb. Male resembles P. jara Perafán & Pérez-Miles, 2014 but can be distinguished by the uniform color on dorsal cephalothorax and by the palpal organ morphology being wider on the bulb base and embolus shorter and thicker, with the tip of embolus not so directed retrolaterally and prolateral keel bearing a serrated edge with three teeth. Additionally, P. vulpinus is reported for the first time for Argentina along with new distributional data.
Resumo:
ABSTRACT We described a new species of spider, Alpaida clarindoi sp. nov. (Araneidae), from the southwestern Amazon forest. The new species is distinguished from most Alpaida by the presence of a pair of shoulders spines. Females can be separated from similar species by the subquadrangular shape of the epigynum, and males by the shape of the terminal apophysis and the tegulum, which possess an apical pointed tip. Alpaida clarindoi sp. nov. is described based on both sexes.
Resumo:
Hyla claresignata Lutz & Lutz, 1939, is a large species apparently not closely allied to the other known Brazilian hylas. It is characterized by the very small tympanum; the head is short and the snout rounded; the legs are long, the hands and feet unusually large, the latter extensively webbbed. The specific name is derived from the insular, irregular, or roughly triangular, dark spots, with a light halo, found mostly in the dorso-lateral region and on the legs. It belongs to the rain-forest fauna of the Marítime Range. The adult is a bromeliad-dweller and the tadpole rhyacophilous. DESCRIPTION. Vomerine teeth in two separate, oblique, groups, behind the large choanae, parallel to the posterior half of their inner border. Tongue entire, short, very broad and hardly free behind. Snout short, rounded, with distinct canthus rostralis and gradually sloping loreal region. Eye very large and prominent, its horizontal diameter almost equal to the distance between its anterior corner and the tip of the snout. Tympanum very small, less than one third of the diameter of the eye, but distinct, partly covered by a short, heavy ridge. Lateral fingers less than one third webbed; fourth finger slightly longer than the second, just reaching the base of the disk of the third; subarticular tubercles well developed; an angular pollex rudiment, more noticeable in the males. Toes almost completely webbed, the edge of the web inserted at the base of the disk on the third and the fifth; an inner metatarsal tubercle. Skin smooth above, granular beneath, on the throat minutely so. No dermal appendage on the hell. Habit robust, head broader than long, body rather heavy, slightly narrowed in the postaxillary region. Legs long, the tibiotarsal articulation reaching beyond the tip of the snout when adpressed. Type (female): 61 mm. (Fig. 1.) DIAGNOSIS of TADPOLE (by G. Orton). "A large specialized, mountain-stream tadpole, with wide head an elongated, flattened snout, greatly enlarged lips and high tooth formula. Eyes dorsal. Spiracle sinistral, projecting, situated far back on side. Anus dextral. Tooth formula 8/12 to 9/14 in fully grown larvae. Tail with a prominent, vertical dark band across musculature and fins; a second concentration of dark pigment near tip of tail, may or may not form a similar but narrower band. Maximum known total length: 60mm.; head and body length 25mm. (Figs. 6 e 7). For further details see Lutz & Lutz, 1939 and Lutz B. & Orton G. 1946.
Resumo:
A description of Physa marmorata Guilding, 1828, based on material collected at its type-locality, the Caribbean island of Saint Vincent, is presented. The shell is thin, horn-colored, surface very glossy, diaphanous. Spire acute, elevated; protoconch distinct, rounded-conical, reddish-brown; five not shouldered, broadly convex whorls with subobsolete spiral lines and thin growth lines. Aperture elongated, 1.4-2.0 times as long as the remaining shell length, narrow obovate-lunate; upper half acute-angled,lower half oval,narrowly rounded at the base, outer lip sharp, inner lip completely closing the umbilical region; a very distinct callus on the parietal wall; columellar lip with a low ridge gradually merging into the callus. ratios: shell width/shell length = 0.44 - 0.52 (mean 0.47); spire length /shell lenght = 0.33-0.41 (mean 0.39); aperture length/shell lenght = 0.59-0.67 (mean 0.62). Oral lappets laterally mucronate, foot spatulate with deeply pigmented acuminate tail. Mantle reflection with 6-10 short triangular dentations covering nearly half the right surface of the body whorl, and 4-6 covering a part of the ventral wall. Body surface with tiny dots of greenish-yellow pigment besides melanin. Renal tube tightly folded in toa zigzag course. Ovotestis diverticula acinous, laterally pressed against each other around a collecting canal. Ovispermiduct with well-developed seminal vesicle. oviduct highly convoluted, merging into a less convoluted nidamental gland which narrows to a funnel-shaped uterus and a short vagina. Spermathecal body oblong, more or less constricted in the middle and somewhat curved; spermathecal duct uniformly narrow, a little longer than be body. About 20 prostatic diverticula, simple, bifurcate or divided into a few short branches, distalmost ones assembled into a cluster. Penis long, nearly uniformly narrow; penial canal with lateral opening about the junction of its middle and lower thirds. Penial sheath with a bulbous terminal expasion the tip of which isinserted into the caudal end of the prepuce. Prepuce shouldered, much wider than the narrow portion of the penial sheath. Penial sheath/prepuce ratio about 2.08 (1.45-2.75). The main extrinsic muscles of the penial complex are a retractor, with a branch attached to the bulb, and another to the caudal end of the penial sheath; and a protractor, with a branch attached to the shoulder of the prepuce and adjoining area of the penial sheath, and another to the caudal end of the penial sheath. Egg capsule C-shaped, with 10-30 elliptical eggs (snails 10mm long) measuring about 1.10 mm (0.90-1.32) through the long axis and surrounded by an inner and an outer lamellate membranes. Jaw a simple obtusely V-shaped plate. radula will be described separately.
Resumo:
BACKGROUND AND PURPOSE: Accurate placement of an external ventricular drain (EVD) for the treatment of hydrocephalus is of paramount importance for its functionality and in order to minimize morbidity and complications. The aim of this study was to compare two different drain insertion assistance tools with the traditional free-hand anatomical landmark method, and to measure efficacy, safety and precision. METHODS: Ten cadaver heads were prepared by opening large bone windows centered on Kocher's points on both sides. Nineteen physicians, divided in two groups (trainees and board certified neurosurgeons) performed EVD insertions. The target for the ventricular drain tip was the ipsilateral foramen of Monro. Each participant inserted the external ventricular catheter in three different ways: 1) free-hand by anatomical landmarks, 2) neuronavigation-assisted (NN), and 3) XperCT-guided (XCT). The number of ventricular hits and dangerous trajectories; time to proceed; radiation exposure of patients and physicians; distance of the catheter tip to target and size of deviations projected in the orthogonal plans were measured and compared. RESULTS: Insertion using XCT increased the probability of ventricular puncture from 69.2 to 90.2 % (p = 0.02). Non-assisted placements were significantly less precise (catheter tip to target distance 14.3 ± 7.4 mm versus 9.6 ± 7.2 mm, p = 0.0003). The insertion time to proceed increased from 3.04 ± 2.06 min. to 7.3 ± 3.6 min. (p < 0.001). The X-ray exposure for XCT was 32.23 mSv, but could be reduced to 13.9 mSv if patients were initially imaged in the hybrid-operating suite. No supplementary radiation exposure is needed for NN if patients are imaged according to a navigation protocol initially. CONCLUSION: This ex vivo study demonstrates a significantly improved accuracy and safety using either NN or XCT-assisted methods. Therefore, efforts should be undertaken to implement these new technologies into daily clinical practice. However, the accuracy versus urgency of an EVD placement has to be balanced, as the image-guided insertion technique will implicate a longer preparation time due to a specific image acquisition and trajectory planning.
Resumo:
The Miocene PX1 gabbro-pyroxenite pluton, Fuerteventura, Canary Islands, is a 3.5 x 5.5 km shallow-level intrusion (0.15-0.2 GPa and 1100-1120 degrees C), interpreted as the feeder-zone to an ocean-island volcano. It displays a vertical magmatic banding expressed in five 50 to 100 metre-wide NNE-SSW trending alkaline gabbro sequences alternating with pyroxenites. This emplacement geometry was controlled by brittle to ductile shear zones, generated by a regional E-W extensional tectonic setting that affected Fuerteventura during the Miocene. At a smaller scale, the PX1 gabbro and pyroxenite bands consist of metre-thick differentiation units, which suggest emplacement by periodic injection of magma pulses as vertical dykes that amalgamated, similarly to a sub-volcanic sheeted dyke complex. Individual dykes underwent internal differentiation following a solidification front parallel to the dyke edges. This solidification front may have been favoured by a significant lateral/horizontal thermal gradient, expressed by the vertical banding in the gabbros, the fractionation asymmetry within individual dykes and the migmatisation of the wall rocks. Pyroxenitic layers result from the fractionation and accumulation of clinopyroxene +/- olivine +/- plagioclase crystals from a mildly alkaline basaltic liquid. They are interpreted as truncated differentiation sequences, from which residual melts were extracted at various stages of their chemical evolution by subsequent dyke intrusions, either next to or within the crystallising unit. Compaction and squeezing of the crystal mush is ascribed to the incoming and inflating magma pulses. The expelled interstitial liquid was likely collected and erupted along with the magma flowing through the newly injected dykes. Clinopyroxene mineral orientation - as evidenced by EBSD and micro X-ray tomography investigations - displays a marked pure-shear component, supporting the interpretation of the role of compaction in the generation of the pyroxenites. Conversely, gabbro sequences underwent minor melt extraction and are believed to represent crystallised coalesced magma batches emplaced at lower rates at the end of eruptive cycles. Clinopyroxene orientations in gabbros record a simple shear component suggesting syn-magmatic deformation parallel to observed NNE-SSW trending shear zones induced by the regional tensional stress field. This emplacement model implies a crystallisation time of 1 to 5 years for individual dykes, consistent with PX1 emplacement over less than 0.5 My. A minimum amount of approximately 150 km(3) of magma is needed to generate the pluton, part of it having been erupted through the Central Volcanic Centre of Fuerteventura. If the regional extensional tectonic regime controls the PX1 feeder-zone initiation and overall geometry, rates and volumes of magma depend on other, source-related factors. High injection rates are likely to induce intrusion growth rates larger than could be accommodated by the regional extension. In this case, dyke intrusion by propagation of a weak tip, combined with the inability of magma to circulate through previously emplaced and crystallised dykes could result in an increase of non-lithostatic pressure on previously emplaced mushy dyke walls; thus generating strong pure-shear compaction within the pluton feeder-zone and interstitial melt expulsion. These compaction-dominated processes are recorded by the cumulitic pyroxenite bands. (C) 2010 Elsevier B.V. All rights reserved.
Resumo:
A description of Pomacea sordida (Swainson, 1823) collected in Caxias and Nova Iguaçu, state of Rio de Janeiro, is presented. The shell is globose, heavy, whith greenish or horn-colored periostracum and dark spinal bands; apex subelevated, 4-5 moderately shoudered whorls, increasing rather rapidly and separated by deep suture. Aperture large, moderately round, yellowish or violaceous; lip thick and sometimes dark brown; umbilicus large and deep; operculum corneous and heavy, entirely closing the aperture. Ratios: shell width/shell length = 0.81-0.91 (mean 0.86); aperture length/shell length = 0.66-0.75 (mean 0.70). Testis, spermiduct and penis pouch as in Pomacea lineata (Spix, 1827). Seminal vesicle whitish and bean-shaped. Prostate cylindric and narrow, cream in coloar as the testis. Penis whiplike whith a closed circular spermiduct. Penial sheath elongated and tapered, with its distal tip turned to the right; outer basal gland situated on the left; inner median gland rounded; apical gland elongated and wrinkled. Ovary composed of branched whitish tubules lying superficially on the digestive gland; oviduct and seminal receptacle as in P. lineata; albumen gland yellowish - orange. Vestigial male copulatory apparatus (penis and its sheath) present in all females examined.
Resumo:
The geodynamic forces acting in the Earth's interior manifest themselves in a variety of ways. Volcanoes are amongst the most impressive examples in this respect, but like with an iceberg, they only represent the tip of a more extensive system hidden underground. This system consists of a source region where melt forms and accumulates, feeder connections in which magma is transported towards the surface, and different reservoirs where it is stored before it eventually erupts to form a volcano. A magma represents a mixture of melt and crystals. The latter can be extracted from the source region, or form anywhere along the path towards their final crystallization place. They will retain information of the overall plumbing system. The host rocks of an intrusion, in contrast, provide information at the emplacement level. They record the effects of thermal and mechanical forces imposed by the magma. For a better understanding of the system, both parts - magmatic and metamorphic petrology - have to be integrated. I will demonstrate in my thesis that information from both is complementary. It is an iterative process, using constraints from one field to better constrain the other. Reading the history of the host rocks is not always straightforward. This is shown in chapter two, where a model for the formation of clustered garnets observed in the contact aureole is proposed. Fragments of garnets, older than the intrusive rocks are overgrown by garnet crystallizing due to the reheating during emplacement of the adjacent pluton. The formation of the clusters is therefore not a single event as generally assumed but the result of a two-stage process, namely the alteration of the old grains and the overgrowth and amalgamation of new garnet rims. This makes an important difference when applying petrological methods such as thermobarometry, geochronology or grain size distributions. The thermal conditions in the aureole are a strong function of the emplacement style of the pluton. therefore it is necessary to understand the pluton before drawing conclusions about its aureole. A study investigating the intrusive rocks by means of field, geochemical, geochronologi- cal and structural methods is presented in chapter three. This provided important information about the assembly of the intrusion, but also new insights on the nature of large, homogeneous plutons and the structure of the plumbing system in general. The incremental nature of the emplacement of the Western Adamello tonalité is documented, and the existence of an intermediate reservoir beneath homogeneous plutons is proposed. In chapter four it is demonstrated that information extracted from the host rock provides further constraints on the emplacement process of the intrusion. The temperatures obtain by combining field observations with phase petrology modeling are used together with thermal models to constrain the magmatic activity in the immediate intrusion. Instead of using the thermal models to control the petrology result, the inverse is done. The model parameters were changed until a match with the aureole temperatures was obtained. It is shown, that only a few combinations give a positive match and that temperature estimates from the aureole can constrain the frequency of ancient magmatic systems. In the fifth chapter, the Anisotropy of Magnetic Susceptibility of intrusive rocks is compared to 3D tomography. The obtained signal is a function of the shape and distribution of ferromagnetic grains, and is often used to infer flow directions of magma. It turns out that the signal is dominated by the shape of the magnetic crystals, and where they form tight clusters, also by their distribution. This is in good agreement with the predictions made in the theoretical and experimental literature. In the sixth chapter arguments for partial melting of host rock carbonates are presented. While at first very surprising, this is to be expected when considering the prior results from the intrusive study and experiments from the literature. Partial melting is documented by compelling microstructures, geochemical and structural data. The necessary conditions are far from extreme and this process might be more frequent than previously thought. The carbonate melt is highly mobile and can move along grain boundaries, infiltrating other rocks and ultimately alter the existing mineral assemblage. Finally, a mineralogical curiosity is presented in chapter seven. The mineral assemblage magne§site and calcite is in apparent equilibrium. It is well known that these two carbonates are not stable together in the system Ca0-Mg0-Fe0-C02. Indeed, magnesite and calcite should react to dolomite during metamorphism. The presented explanation for this '"forbidden" assemblage is, that a calcite melt infiltrated the magnesite bearing rock along grain boundaries and caused the peculiar microstructure. This is supported by isotopie disequilibrium between calcite and magnesite. A further implication of partially molten carbonates is, that the host rock drastically looses its strength so that its physical properties may be comparable to the ones of the intrusive rocks. This contrasting behavior of the host rock may ease the emplacement of the intrusion. We see that the circle closes and the iterative process of better constraining the emplacement could start again. - La Terre est en perpétuel mouvement et les forces tectoniques associées à ces mouvements se manifestent sous différentes formes. Les volcans en sont l'un des exemples les plus impressionnants, mais comme les icebergs, les laves émises en surfaces ne représentent que la pointe d'un vaste système caché dans les profondeurs. Ce système est constitué d'une région source, région où la roche source fond et produit le magma ; ce magma peut s'accumuler dans cette région source ou être transporté à travers différents conduits dans des réservoirs où le magma est stocké. Ce magma peut cristalliser in situ et produire des roches plutoniques ou alors être émis en surface. Un magma représente un mélange entre un liquide et des cristaux. Ces cristaux peuvent être extraits de la source ou se former tout au long du chemin jusqu'à l'endroit final de cristallisation. L'étude de ces cristaux peut ainsi donner des informations sur l'ensemble du système magmatique. Au contraire, les roches encaissantes fournissent des informations sur le niveau d'emplacement de l'intrusion. En effet ces roches enregistrent les effets thermiques et mécaniques imposés par le magma. Pour une meilleure compréhension du système, les deux parties, magmatique et métamorphique, doivent être intégrées. Cette thèse a pour but de montrer que les informations issues de l'étude des roches magmatiques et des roches encaissantes sont complémentaires. C'est un processus itératif qui utilise les contraintes d'un domaine pour améliorer la compréhension de l'autre. Comprendre l'histoire des roches encaissantes n'est pas toujours aisé. Ceci est démontré dans le chapitre deux, où un modèle de formation des grenats observés sous forme d'agrégats dans l'auréole de contact est proposé. Des fragments de grenats plus vieux que les roches intru- sives montrent une zone de surcroissance générée par l'apport thermique produit par la mise en place du pluton adjacent. La formation des agrégats de grenats n'est donc pas le résultat d'un seul événement, comme on le décrit habituellement, mais d'un processus en deux phases, soit l'altération de vieux grains engendrant une fracturation de ces grenats, puis la formation de zone de surcroissance autour de ces différents fragments expliquant la texture en agrégats observée. Cette interprétation en deux phases est importante, car elle engendre des différences notables lorsque l'on applique des méthodes pétrologiques comme la thermobarométrie, la géochronologie ou encore lorsque l'on étudie la distribution relative de la taille des grains. Les conditions thermales dans l'auréole de contact dépendent fortement du mode d'emplacement de l'intrusion et c'est pourquoi il est nécessaire de d'abord comprendre le pluton avant de faire des conclusions sur son auréole de contact. Une étude de terrain des roches intrusives ainsi qu'une étude géochimique, géochronologique et structurale est présente dans le troisième chapitre. Cette étude apporte des informations importantes sur la formation de l'intrusion mais également de nouvelles connaissances sur la nature de grands plutons homogènes et la structure de système magmatique en général. L'emplacement incrémental est mis en évidence et l'existence d'un réservoir intermédiaire en-dessous des plutons homogènes est proposé. Le quatrième chapitre de cette thèse illustre comment utiliser l'information extraite des roches encaissantes pour expliquer la mise en place de l'intrusion. Les températures obtenues par la combinaison des observations de terrain et l'assemblage métamorphique sont utilisées avec des modèles thermiques pour contraindre l'activité magmatique au contact directe de cette auréole. Au lieu d'utiliser le modèle thermique pour vérifier le résultat pétrologique, une approche inverse a été choisie. Les paramètres du modèle ont été changés jusqu'à ce qu'on obtienne une correspondance avec les températures observées dans l'auréole de contact. Ceci montre qu'il y a peu de combinaison qui peuvent expliquer les températures et qu'on peut contraindre la fréquence de l'activité magmatique d'un ancien système magmatique de cette manière. Dans le cinquième chapitre, les processus contrôlant l'anisotropie de la susceptibilité magnétique des roches intrusives sont expliqués à l'aide d'images de la distribution des minéraux dans les roches obtenues par tomographie 3D. Le signal associé à l'anisotropie de la susceptibilité magnétique est une fonction de la forme et de la distribution des grains ferromagnétiques. Ce signal est fréquemment utilisé pour déterminer la direction de mouvement d'un magma. En accord avec d'autres études de la littérature, les résultats montrent que le signal est dominé par la forme des cristaux magnétiques, ainsi que par la distribution des agglomérats de ces minéraux dans la roche. Dans le sixième chapitre, une étude associée à la fusion partielle de carbonates dans les roches encaissantes est présentée. Si la présence de liquides carbonatés dans les auréoles de contact a été proposée sur la base d'expériences de laboratoire, notre étude démontre clairement leur existence dans la nature. La fusion partielle est documentée par des microstructures caractéristiques pour la présence de liquides ainsi que par des données géochimiques et structurales. Les conditions nécessaires sont loin d'être extrêmes et ce processus pourrait être plus fréquent qu'attendu. Les liquides carbonatés sont très mobiles et peuvent circuler le long des limites de grain avant d'infiltrer d'autres roches en produisant une modification de leurs assemblages minéralogiques. Finalement, une curiosité minéralogique est présentée dans le chapitre sept. L'assemblage de minéraux de magnésite et de calcite en équilibre apparent est observé. Il est bien connu que ces deux carbonates ne sont pas stables ensemble dans le système CaO-MgO-FeO-CO.,. En effet, la magnésite et la calcite devraient réagir et produire de la dolomite pendant le métamorphisme. L'explication présentée pour cet assemblage à priori « interdit » est que un liquide carbonaté provenant des roches adjacentes infiltre cette roche et est responsable pour cette microstructure. Une autre implication associée à la présence de carbonates fondus est que la roche encaissante montre une diminution drastique de sa résistance et que les propriétés physiques de cette roche deviennent comparables à celles de la roche intrusive. Cette modification des propriétés rhéologiques des roches encaissantes peut faciliter la mise en place des roches intrusives. Ces différentes études démontrent bien le processus itératif utilisé et l'intérêt d'étudier aussi bien les roches intrusives que les roches encaissantes pour la compréhension des mécanismes de mise en place des magmas au sein de la croûte terrestre.
Resumo:
El deterioro de los niveles de desigualdad y el empeoramiento de los niveles de pobreza que se registraron en Uruguay durante la crisis de comienzos del siglo XXI, tuvieron una especial repercusión en la infancia y la juventud, haciendo más vulnerable el futuro desempeño socioeconómico de las nuevas generaciones. El presente trabajo pretende ahondar en la existencia y extensión de la transmisión intergeneracional de la pobreza (TIP) en Uruguay. La ausencia de datos de panel impide la utilización de algunas de las metodologías más difundidas, como la correlación intergeneracional de ingresos, por lo cual se opta por centrar el análisis en la correlación intergeneracional educativa, mediante la utilización de la Encuesta Continua de Hogares del año 2005. Los resultados comprueban la existencia de correlación intergeneracional educativa en Uruguay, que se ubica por debajo de la registrada en la mayoría de los países de América Latina, y por encima de la registrada en los países más desarrollados. Para ahondar en los determinantes de la TIP se ha estimado un modelo de selección discreta que permite explicar la probabilidad de los jóvenes de terminar la enseñanza secundaria (umbral que permite situarse fuera de la situación de pobreza) en función de una serie de variables vinculadas con el entorno familiar. Se comprueba así la significativa importancia de la educación de los padres en la explicación de los resultados de los hijos, respaldando los enfoques teóricos del capital humano y de la transmisión de habilidades. El análisis también evidencia el efecto negativo de un mayor número de hermanos en la familia, comprobando la importancia del enfoque de cantidad calidad de Becker. Finalmente, los resultados permiten entrever la importancia de otros mecanismos de la TIP como la segregación residencial, el assortative mating y el embarazo adolescente.