A method to determine volatile contaminants in polyethylene terephthalate (PET) packages by HDC-GC-FID and its application to post-consumer materials

A simple and low cost method to determine volatile contaminants in post-consumer recycled PET flakes was developed and validated by Headspace Dynamic Concentration and Gas Chromatography-Flame Ionization Detection (HDC-GC-FID). The analytical parameters evaluated by using surrogates include: correlation coefficient, detection limit, quantification limit, accuracy, intra-assay precision, and inter-assay precision. In order to compare the efficiency of the proposed method to recognized automated techniques, post-consumer PET packaging samples collected in Brazil were used. GC-MS was used to confirm the identity of the substances identified in the PET packaging. Some of the identified contaminants were estimated in the post-consumer material at concentrations higher than 220 ng.g-1. The findings in this work corroborate data available in the scientific literature pointing out the suitability of the proposed analytical method.

An Eulerian Immersed Boundary Method for flow simulations over stationary and moving rigid bodies

The fluid flow over bodies with complex geometry has been the subject of research of many scientists and widely explored experimentally and numerically. The present study proposes an Eulerian Immersed Boundary Method for flows simulations over stationary or moving rigid bodies. The proposed method allows the use of Cartesians Meshes. Here, two-dimensional simulations of fluid flow over stationary and oscillating circular cylinders were used for verification and validation. Four different cases were explored: the flow over a stationary cylinder, the flow over a cylinder oscillating in the flow direction, the flow over a cylinder oscillating in the normal flow direction, and a cylinder with angular oscillation. The time integration was carried out by a classical 4th order Runge-Kutta scheme, with a time step of the same order of distance between two consecutive points in x direction. High-order compact finite difference schemes were used to calculate spatial derivatives. The drag and lift coefficients, the lock-in phenomenon and vorticity contour plots were used for the verification and validation of the proposed method. The extension of the current method allowing the study of a body with different geometry and three-dimensional simulations is straightforward. The results obtained show a good agreement with both numerical and experimental results, encouraging the use of the proposed method.

Mineralogical characterization of a highly-weathered soil by the Rietveld Method

The mineralogical characterization through mineral quantification of Brazilian soils by X-ray diffraction data using the Rietveld Method is not common. A mineralogical quantification of an Acric Ferralsol from the Ponta Grossa region, state of Paraná, Brazil, was carried out using this Method with X-Ray Diffraction data to verify if this method was suitable for mineral quantification of a highly-weathered soil. The A, AB and B3 horizons were fractioned to separate the different particle sizes: clay, silt, fine sand (by Stokes Law) and coarse sand fractions (by sieving), with the procedure free of chemical treatments. X-ray Fluorescence, Inductively Coupled Plasma Atomic Emission Spectrometry, Infrared Spectroscopy and Mössbauer Spectroscopy were used in order to assist the mineral identification and quantification. The Rietveld Method enabled the quantification of the present minerals. In a general way, the quantitative mineralogical characterization by the Rietveld Method revealed that quartz, gibbsite, rutile, hematite, goethite, kaolinite and halloysite were present in the clay and silt fractions of all horizons. The silt fractions of the deeper horizons were different from the more superficial ones due to the presence of large amounts of quartz. The fine and the coarse sand fractions are constituted mainly by quartz. Therefore, a mineralogical quantification of the finer fraction (clay and silt) by the Rietveld Method was successful.

O papel do polimorfismo funcional VNTR da região promotora do gene MAOA nos transtornos psiquiátricos

INTRODUÇÃO: Muitos estudos têm investigado a associação do polimorfismo VNTR (número variável de repetições em série) localizado na região promotora do gene da enzima monoamina oxidase A (MAOA) com alterações no comportamento humano e em diversos transtornos psiquiátricos. OBJETIVO: O objetivo do presente trabalho foi revisar a literatura sobre a participação desse polimorfismo funcional na modulação do comportamento humano para o desenvolvimento dos transtornos psiquiátricos. MÉTODO: A pesquisa foi realizada na literatura em inglês, de janeiro de 1998 a junho de 2009, disponível no Medline, Embase, Web of Science e na base de dados PsycInfo, utilizando os seguintes termos: "MAOA e comportamento humano" e "MAOA e psiquiatria". RESULTADOS: Foram encontrados 3.873 estudos. Desses, 109 foram selecionados e incluídos na revisão. Encontrou-se associação de alelos de baixa atividade do VNTR com transtorno de personalidade antissocial, transtorno de conduta, transtorno de déficit de atenção e hiperatividade, jogo patológico e dependência de substâncias. Alelos da alta atividade da MAOA foram associados a depressão, ansiedade, neuroticismo e anorexia nervosa. Não se encontrou associação entre polimorfismos da MAOA e esquizofrenia e transtorno bipolar. CONCLUSÃO: Os principais achados dão suporte ao papel do polimorfismo VNTR da região promotora do gene da MAOA em alguns transtornos psiquiátricos, apesar das divergências encontradas devidas às dificuldades metodológicas de estudos em genética. De modo geral, os estudos associam os alelos de baixa atividade da MAOA com comportamentos impulsivos e agressivos ("comportamentos hiperativos"), enquanto os alelos de alta atividade do gene são mais associados a "comportamentos hipoativos".

A convenient method for lecithin purification from fresh eggs

The increasing demand for fatty acid-free lecithin required modifications in existing purification methods. In this technical note we describe a purification procedure with the following steps: a) homogenization and extraction of yolks obtained from fresh eggs with acetone, b) solubilization with ethanol and solvent elimination and c) repeated solubilization/precipitation with petroleum ether/acetone. This crude extract was chromatographed on neutral alumina, which was exhaustively washed with chloroform before elution with chloroform:methanol, allowing the sequential separation of fatty acids and lecithin. Chromatographic behavior and mass spectra of the product are presented. This fast procedure yields fatty acid-free lecithin at a competitive cost.

Development and validation of a simple and rapid capillary zone electrophoresis method for determination of nnrti nevirapine in pharmaceutical formulations

A simple and fast capillary zone electrophoresis (CZE) method has been developed and validated for quantification of a non-nucleoside reverse transcriptase inhibitor (NNRTI) nevirapine, in pharmaceuticals. The analysis was optimized using 10 mmol L-1 sodium phosphate buffer pH 2.5, +25 kV applied voltage, hydrodynamic injection 0.5 psi for 5 s and direct UV detection at 200 µm. Diazepam (50.0 µg mL-1) was used as internal standard. Under these conditions, nevirapine was analyzed in approximately less than 2.5 min. The analytical curve presented a coefficient of correlation of 0.9994. Limits of detection and quantification were 1.4 µg mL-1 and 4.3 µg mL-1, respectively. Intra- and inter-day precision expressed as relative standard deviations were 1.4% and 1.3%, respectively and the mean recovery was 100.81%. The active pharmaceutical ingredient was subjected to hydrolysis (acid, basic and neutral) and oxidative stress conditions. No interference of degradation products and tablet excipients were observed. This method showed to be rapid, simple, precise, accurate and economical for determination of nevirapine in pharmaceuticals and it is suitable for routine quality control analysis since CE offers benefits in terms of quicker method development and significantly reduced operating costs.

Validation of a food frequency questionnaire to assess the consumption of carotenoids, fruits and vegetables among adolescents: the method of triads

The aim of this study was to validate the intake of carotenoids, fruits and vegetables estimated by the Food Frequency Questionnaire for Adolescents (FFQA) using the method of triads. Blood samples were collected from 80 elementary school adolescents to assess serum levels of β-carotene. Partial correlation coefficients (r) were calculated between an estimated intake of carotenoids, fruits and vegetables and the serum levels of β-carotene. Validity coefficients were calculated using the method of triads. With the exception of carotenoids, partial r from the food frequency questionnaire (FFQ) were greater than those of the 24-hour recall (24hR). The fruit/vegetable group showed the highest partial r for the FFQ (r = 0.235) and the 24hR (r = 0.137). The highest validity coefficient was obtained for the vegetable group, as assessed by the FFQ (r = 0.873). On average, the validity coefficient values for the FFQ were greater than those obtained for the 24hR or the β-carotene serum levels. The FFQA is an accurate tool for estimating the intake of carotenoids, fruits and vegetables in this population group.

Influência do consumo alimentar na gestação sobre a retenção de peso pós-parto

OBJETIVO: Avaliar a influência da alimentação durante a gestação sobre a retenção de peso pós-parto. MÉTODOS: Foram acompanhadas 82 gestantes adultas e saudáveis que iniciaram o pré-natal em serviço público de saúde no Município de São Paulo, SP, entre abril e junho de 2005. As medidas de peso e estatura foram aferidas na primeira entrevista (até 16 semanas de gestação) e a medida de peso foi repetida em visita domiciliar 15 dias após o parto. O Recordatório de 24 horas foi usado para avaliar o consumo alimentar e foi aplicado nos três trimestres da gestação. Foi calculado o consumo médio de gordura saturada, fibras, açúcar adicionado, refrigerantes, alimentos processados, frutas, verduras e legumes, e a densidade energética da dieta. A retenção de peso foi obtida pela diferença entre a medida de peso pós-parto e a primeira medida realizada. A influência da alimentação sobre a retenção de peso pós-parto foi avaliada por meio de análise de regressão linear múltipla e foi realizado o teste para tendência linear. As variáveis utilizadas para ajuste do modelo foram: índice de massa corporal no início da gestação, estatura, renda familiar per capita, tabagismo, idade e escolaridade. RESULTADOS: O índice de massa corporal inicial médio foi de 24 kg/m² e a retenção média de peso foi de 1,9 kg. O aumento do consumo de gordura saturada (p = 0,005) e alimentos processados (p = 0,014) elevou de forma significativa a retenção de peso pós-parto, após ajuste pelas variáveis de controle. As demais variáveis de consumo alimentar não apresentaram relação significativa com a variável desfecho. CONCLUSÕES: O maior consumo de alimentos não saudáveis, como alimentos processados, e de gordura saturada influencia a elevação da retenção de peso pós-parto.

Evaluation of oviposition traps as an entomological surveillance method for Aedes aegypti (Diptera, Culicidae)

This study aimed to describe the behavior of oviposition traps for Aedes aegypti over time, to compare it with the larval survey and to investigate the association with climatic variables. It was conducted in São José do Rio Preto city, São Paulo. Daily climatic data and fortnightly measurements for oviposition traps and larval infestation were collected from October 2003 to September 2004. Three different periods were identified in the behavior of oviposition traps' positivity and mean number of eggs: increase, plateau and decrease in values. These measurements followed the variation of climatic data from the first and third periods. High correlation was obtained between the positivity and the mean number of eggs. The oviposition traps showed higher capacity to detect the vector than did larval survey. It was observed that the first (October to December) and third (May to September) periods were considered to be the most suitable to use oviposition traps than larval surveys.

Parâmetros genéticos para idade ao primeiro parto estimados por diferentes modelos para rebanhos da raça Nelore

Com objetivo de estimar parâmetros genéticos e estudar a utilização de diferentes efeitos em avaliações genéticas para idade ao primeiro parto (IPP) por diferentes modelos, foram utilizados registros de IPP de animais da raça Nelore, nascidos entre os anos de 1990 e 2005. Foram considerados os seguintes modelos (M): M1, incluindo o efeito fixo de GC1 (constituído pelos animais nascidos na mesma fazenda e ano), além da covariável, peso aos 365 dias de idade (efeito linear e quadrático), totalizando 24.263 registros de IPP; M2, considerando os efeitos fixos de GC1, ano e estação de parição, totalizando 59.792 registros de IPP e M3, incluindo os efeitos fixos de GC2 (agrupando os animais nascidos na mesma fazenda, ano e que conceberam no mesmo manejo reprodutivo), ano e estação de parição, totalizando 59.792 registros de IPP. As estimativas dos componentes de variância e herdabilidade e os valores genéticos (VG) foram obtidos pelo método da máxima verossimilhança restrita, com a inclusão da matriz de parentesco disponível. As diferenças esperadas na progênie (DEPs) foram obtidas dividindo os VG por dois. Após a obtenção desses resultados, foram realizadas correlações entre os VG e o ranqueamento das DEPs dos reprodutores para IPP, utilizando-se o procedimento PROC CORR (SAS, 2003). Ao se considerar o ano e a estação de parto nos modelos de análise (M2 e M3), esses produziram um maior R², indicando que tais modelos conseguiram explicar, em maior grau, as diferenças existentes entre os animais para IPP. As herdabilidades estimadas foram de baixa magnitude (0,14 e 0,15). As correlações entre os VG obtidas por diferentes modelos foram 0,73 (M1 x M2); 0,91 (M2 x M3) e 0,66 (M1 x M3).

Echocardiographic study of paediatric patients with mucopolysaccharidosis

Principle Mucopolysaccharidosis is an inborn error of metabolism causing glucosaminoglycans tissue storage. Cardiovascular involvement is variable but contributes significantly towards the morbidity and mortality of the patients. Objective To characterise the echocardiographic abnormalities in children and adolescents with different types of mucopolysaccharidosis. Method Echocardiograms and medical records of 28 patients aged 2–14 years, seen from 2003 to 2005, were revised. At that time, the enzymatic replacement therapy was still not available in our institution.Results Echocardiographic alterations were detected in 26 patients (93 per cent), whereas 16 (57 per cent) had abnormal auscultation, and only 6 (21 per cent) presented with cardiovascular complaint. Mitral valve thickening with dysfunction (regurgitation, stenosis, or double lesion) was diagnosed in 60.8 per cent, left ventricular hypertrophy in 43 per cent and aortic valve thickening with regurgitation in 35.8 per cent of the patients. There was no systolic dysfunction and mild left diastolic dysfunction was shown in 21.5 per cent of the patients. Pulmonary hypertension was present in 36 per cent of the patients, causing the only two deaths recorded. There was a strong association between the accumulation of dermatan sulphate and the presence of mitral valve dysfunction (p = 0.0003), aortic valve dysfunction (p = 0.006), and pulmonary hypertension (p = 0.006). Among individuals with two or more examinations, 82 per cent had a worsening evolution. Conclusions Echocardiographic alterations in children with Mucopolysaccharidosis are frequent and have a progressive character Left valve lesions, ventricular hypertrophy, and pulmonary hypertension were the most common findings and there was an association between the accumulation of dermatan sulphate and cardiovascular involvement. Unlike in adults, pulmonary hypertension was the main cause of death, not left ventricle systolic dysfunction

Trajectory Sensitivity Method and Master-Slave Synchronization to Estimate Parameters of Nonlinear Systems

A combination of trajectory sensitivity method and master-slave synchronization was proposed to parameter estimation of nonlinear systems. It was shown that master-slave coupling increases the robustness of the trajectory sensitivity algorithm with respect to the initial guess of parameters. Since synchronization is not a guarantee that the estimation process converges to the correct parameters, a conditional test that guarantees that the new combined methodology estimates the true values of parameters was proposed. This conditional test was successfully applied to Lorenz's and Chua's systems, and the proposed parameter estimation algorithm has shown to be very robust with respect to parameter initial guesses and measurement noise for these examples. Copyright (C) 2009 Elmer P. T. Cari et al.

Crowbar System in Doubly Fed Induction Wind Generators

In the last 15 years, the use of doubly fed induction machines in modern variable-speed wind turbines has increased rapidly. This development has been driven by the cost reduction as well as the low-loss generation of Insulated Gate Bipolar Transistors (IGBT). According to new grid code requirements, wind turbines must remain connected to the grid during grid disturbances. Moreover, they must also contribute to voltage support during and after grid faults. The crowbar system is essential to avoid the disconnection of the doubly fed induction wind generators from the network during faults. The insertion of the crowbar in the rotor circuits for a short period of time enables a more efficient terminal voltage control. As a general rule, the activation and the deactivation of the crowbar system is based only on the DC-link voltage level of the back-to-back converters. In this context, the authors discuss the critical rotor speed to analyze the instability of doubly fed induction generators during grid faults.

Power Secant Method applied to natural frequency extraction of Timoshenko beam structures

This work deals with an improved plane frame formulation whose exact dynamic stiffness matrix (DSM) presents, uniquely, null determinant for the natural frequencies. In comparison with the classical DSM, the formulation herein presented has some major advantages: local mode shapes are preserved in the formulation so that, for any positive frequency, the DSM will never be ill-conditioned; in the absence of poles, it is possible to employ the secant method in order to have a more computationally efficient eigenvalue extraction procedure. Applying the procedure to the more general case of Timoshenko beams, we introduce a new technique, named ""power deflation"", that makes the secant method suitable for the transcendental nonlinear eigenvalue problems based on the improved DSM. In order to avoid overflow occurrences that can hinder the secant method iterations, limiting frequencies are formulated, with scaling also applied to the eigenvalue problem. Comparisons with results available in the literature demonstrate the strength of the proposed method. Computational efficiency is compared with solutions obtained both by FEM and by the Wittrick-Williams algorithm.

A simple procedure for reliability assessment of thin composite plates against buckling

In some circumstances ice floes may be modeled as beams. In general this modeling supposes constant thickness, which contradicts field observations. Action of currents, wind and the sequence of contacts, causes thickness to vary. Here this effect is taken into consideration on the modeling of the behavior of ice hitting inclined walls of offshore platforms. For this purpose, the boundary value problem is first equated. The set of equations so obtained is then transformed into a system of equations, that is then solved numerically. For this sake an implicit solution is developed, using a shooting method, with the accompanying Jacobian. In-plane coupling and the dependency of the boundary terms on deformation, make the problem non-linear and the development particular. Deformation and internal resultants are then computed for harmonic forms of beam profile. Forms of giving some additional generality to the problem are discussed.