Empirically testing the dimensions of consumer trust in e-commerce

In the fields of marketing and general management, many are the contributions of literature relating trust and e‐commerce. Trust is perceived as an issue that concerns the consumers’ intention to purchase. As so, in this research, a path model is empirically tested in order to develop solutions for Internet vendors on how to deal with consumers and increase their trust. The path model measures how the dimensions of trust, named as competence, integrity and benevolence positively influence the overall trust of the consumers and at the same time how the sources of trust – consumer characteristics, firm characteristics, website infrastructure and interactions influence those dimensions. The data used to test the model was collected in Portugal, through 365 valid cases. Findings revealed that consumers, which have high level of overall trust, are more likely to intent to purchase online.

Modelação não-linear do comportamento de vigas-parede

Com a evolução dos recursos computacionais e o desenvolvimento dos modelos constitutivos disponíveis na avaliação do comportamento estrutural de elementos de betão armado, é comum recorrer-se cada vez mais a modelos numéricos que consideram a não-linearidade física e geométrica. As simulações numéricas obtidas com recurso a este tipo de modelos computacionais permitem obter um historial completo do comportamento estrutural, desde o início da aplicação do carregamento, até ao colapso total da estrutura. Contudo, verifica-se que em zonas de descontinuidade geométrica em estruturas de betão armado, a evolução do padrão de fendilhação é um fenómeno relativamente complexo, cuja simulação numérica representa um desafio considerável. O objectivo deste trabalho é o de verificar a aplicabilidade do Método dos Elementos Aplicados no estudo do desenvolvimento do padrão de fendilhação em paredes de betão armado, solicitadas por um carregamento monotónico. Foi analisado um conjunto de dez paredes, todas com uma abertura que provoca uma zona de descontinuidade geométrica e, consequentemente, um padrão de fendilhação mais complexo. Cada parede tem uma pormenorização de armadura diferente, permitindo verificar a fiabilidade do modelo computacional. Os resultados numéricos foram comparados com ensaios experimentais realizados por Bounassar Filho [8], permitindo tirar conclusões sobre as vantagens e as limitações deste método, quando aplicado ao estudo de estruturas de betão armado solicitadas por cargas monotónicas.

Sintonização de controladores difusos através de técnicas de optimização não-linear com restrições

A presente dissertação tem como objetivo principal a implementação de uma arquitetura baseada em algoritmos evolutivos para a sintonização dos parâmetros do controlador PID (Proporcional-Integral-Derivativo) difuso, sendo o conceito de desempenho em malha fechada explicitamente tido em conta. A sintonização dos parâmetros do controlador difuso é realizada tendo em conta um problema de otimização com restrições, em que a função de custo a ser minimizada é descrita em termos do desempenho em malha fechada, com a dinâmica do sistema a ser aproximada por um modelo não linear. Como nas metodologias de otimização existentes, a incorporação de mecanismos de adaptação referentes às funções de pertença não é comum, na presente dissertação é tido em conta, para além da usual sintonização dos fatores de escala, a sintonização dos fatores de escala e funções de pertença em simultâneo. Os resultados experimentais realizados num sistema de referência, visam demonstrar os benefícios de incorporar as funções de pertença no processo de otimização em diferido. É também utilizado um método analítico de segunda ordem como referência, por forma a comparar o desempenho de uma abordagem de otimização global contra uma de otimização local. Finalmente é implementada uma abordagem em-linha, usando o método analítico de segunda ordem, na otimização dos fatores de escala e funções de pertença.

Sexual dysfunction and dissatisfaction in chronic hepatitis C patients

IntroductionThe prevalence of sexual dysfunction (SD) and dissatisfaction with sexual life (DSL) in patients with chronic hepatitis C virus infection (CHC) was jointly investigated via a thorough psychopathological analysis, which included dimensions such as fatigue, impulsiveness, psychiatric comorbidity, health-related quality of life (HRQL) and sociodemographic and clinical characteristics.MethodsMale and female CHC patients from an outpatient referral center were assessed using the Brief Fatigue Inventory, the Barrat Impulsiveness Scale, the Beck Depression Inventory (BDI), the Hospital Anxiety and Depression Scale, the Hamilton Anxiety Scale (HAM-A), and the World Health Organization Quality of Life Scale-Brief Version (WHOQOL-BREF). Structured psychiatric interviews were performed according to the Mini-International Neuropsychiatric Interview. SD was assessed based on specific items in the BDI (item 21) and the HAM-A (item 12). DSL was assessed based on a specific question in the WHOQOL-BREF (item 21). Multivariate analysis was performed according to an ordinal linear regression model in which SD and DSL were considered as outcome variables.ResultsSD was reported by 60 (57.1%) of the patients according to the results of the BDI and by 54 (51.4%) of the patients according to the results of the HAM-A. SD was associated with older age, female gender, viral genotype 2 or 3, interferon-α use, impulsiveness, depressive symptoms, antidepressant and benzodiazepine use, and lower HRQL. DSL was reported by 34 (32.4%) of the patients and was associated with depressive symptoms, anxiety symptoms, antidepressant use, and lower HRQL.ConclusionsThe prevalence of SD and DSL in CHC patients was high and was associated with factors, such as depressive symptoms and antidepressant use. Screening and managing these conditions represent significant steps toward improving medical assistance and the HRQL of CHC patients.

Dimensions of source credibility in the case of user-generated advertisements

User-generated advertising changed the world of advertising and changed the strategies used by marketers. Many researchers explored the dimensions of source credibility in traditional media and online advertising. However, little previous research explored the dimensions of source credibility in the context of user-generated advertising. This exploratory study aims to investigate the different dimensions of source credibility in the case of user-generated advertising. More precisely, this study will explore the following factors: (1) objectivity, (2) trustworthiness, (3) expertise, (4) familiarity, (5) attractiveness and (6) frequency. The results suggest that some of the dimensions of source credibility (objectivity, trustworthiness, expertise, familiarity and attractiveness) remain the same in the case of user-generated advertising. Additionally, a new dimension is added to the factors that explain source credibility (reputation). Furthermore, the analysis suggests that the dimension “frequency” is not an explanatory factor of credibility in the case of user-generated advertisement. The study also suggests that companies using user-generated advertisement as part of their overall marketing strategy should focus on objectivity, trustworthiness, expertise, attractiveness and reputation when selecting users that will communicate sponsored user-generated advertisements.

Non emergency patients transport - a mixed integer linear programming

This work presents a model and a heuristic to solve the non-emergency patients transport (NEPT) service issues given the new rules recently established in Portugal. The model follows the same principle of the Team Orienteering Problem by selecting the patients to be included in the routes attending the maximum reduction in costs when compared with individual transportation. This model establishes the best sets of patients to be transported together. The model was implemented in AMPL and a compact formulation was solved using NEOS Server. A heuristic procedure based on iteratively solving problems with one vehicle was presented, and this heuristic provides good results in terms of accuracy and computation time.

Mapeamento do uso e cobertura da terra a partir da segmentação e classificação de imagens-fração solo, sombra e vegetação derivadas do modelo linear de mistura aplicado a dados do sensor TM/Landsat5, na região do reservatório de Tucuruí - PA

Técnicas de sensoriamento remoto são fundamentais para o monitoramento das mudanças de uso da terra, principalmente em áreas extensas como a Amazônia. O mapeamento de uso da terra, geralmente é realizado por métodos de classificação manual ou digital pixel a pixel, os quais consomem muito tempo. Este estudo aborda a aplicação do modelo linear de mistura em uma imagem Landsat-TM segmentada para o mapeamento das classes de uso da terra na região do reservatório de Tucuruí-PA para os anos de 1996 e 2001.

Detecção de cicatrizes de áreas queimadas baseada no modelo linear de mistura espectral e imagens índice de vegetação utilizando dados multitemporais do sensor MODIS/TERRA no estado do Mato Grosso, Amazônia brasileira

O objetivo desta pesquisa foi avaliar os dados do sensor MODIS para detectar e monitorar cicatrizes de áreas recém queimadas. Utilizamos imagens da reflectância de superfície do sensor MODIS: produto MOD09 (dia 5 de outubro) e produto MOD13A1 (meses de outubro e novembro). Foi avaliada também uma série temporal de um ano dos índices de vegetação (IV) EVI e NDVI (produto MOD13A1). Uma imagem do sensor ETM+ (dia 5 de outubro) foi utilizada como base para a delimitação dos polígonos amostrais e avaliação dos dados MODIS devido a sua melhor resolução espacial. A metodologia focou na aplicação do modelo linear de mistura espectral nas imagens reflectância para a geração das imagens fração sombra. Análises de regressão foram efetuadas para comparação entre o percentual de sombra derivado da imagem ETM+ e das imagens MODIS. As alterações multitemporais nas imagens IV foram avaliadas com base no teste de Tukey. Os resultados mostraram que a imagem fração sombra gerada a partir do produto MOD09 apresentou um R² = 0,66 (p < 0,01) em relação aos dados ETM+. Para as imagens do produto MOD13A1 não foram identificadas relações significativas. Os IV dentro dos mesmos polígonos apresentaram uma variação sazonal durante o ano. No entanto, não houve uma diminuição significativa dos valores destes índices nos meses onde foram observadas as cicatrizes de áreas recém queimadas. Portanto, o produto MOD09 mostrou-se mais eficiente que o produto MOD13A1 para a detecção de cicatrizes de áreas recém queimadas. A análise multitemporal dos IV sugeriu que não foi possível detectar este mesmo padrão na área de estudo.

Electronic transport across linear defects in graphene

We investigate the low-energy electronic transport across grain boundaries in graphene ribbons and infinite flakes. Using the recursive Green’s function method, we calculate the electronic transmission across different types of grain boundaries in graphene ribbons. We show results for the charge density distribution and the current flow along the ribbon. We study linear defects at various angles with the ribbon direction, as well as overlaps of two monolayer ribbon domains forming a bilayer region. For a class of extended defect lines with periodicity 3, an analytic approach is developed to study transport in infinite flakes. This class of extended grain boundaries is particularly interesting, since the K and K0 Dirac points are superposed.

Assessing the application of polypropylene multifilament yarns in brain phantoms

The currently available clinical imaging methods do not provide highly detailed information about location and severity of axonal injury or the expected recovery time of patients with traumatic brain injury [1]. High-Definition Fiber Tractography (HDFT) is a novel imaging modality that allows visualizing and quantifying, directly, the degree of axons damage, predicting functional deficits due to traumatic axonal injury and loss of cortical projections. This imaging modality is based on diffusion technology [2]. The inexistence of a phantom able to mimic properly the human brain hinders the possibility of testing, calibrating and validating these medical imaging techniques. Most research done in this area fails in key points, such as the size limit reproduced of the brain fibers and the quick and easy reproducibility of phantoms [3]. For that reason, it is necessary to develop similar structures matching the micron scale of axon tubes. Flexible textiles can play an important role since they allow producing controlled packing densities and crossing structures that match closely the human crossing patterns of the brain. To build a brain phantom, several parameters must be taken into account in what concerns to the materials selection, like hydrophobicity, density and fiber diameter, since these factors influence directly the values of fractional anisotropy. Fiber cross-section shape is other important parameter. Earlier studies showed that synthetic fibrous materials are a good choice for building a brain phantom [4]. The present work is integrated in a broader project that aims to develop a brain phantom made by fibrous materials to validate and calibrate HDFT. Due to the similarity between thousands of hollow multifilaments in a fibrous arrangement, like a yarn, and the axons, low twist polypropylene multifilament yarns were selected for this development. In this sense, extruded hollow filaments were analysed in scanning electron microscope to characterize their main dimensions and shape. In order to approximate the dimensional scale to human axons, five types of polypropylene yarns with different linear density (denier) were used, aiming to understand the effect of linear density on the filament inner and outer areas. Moreover, in order to achieve the required dimensions, the polypropylene filaments cross-section was diminished in a drawing stage of a filament extrusion line. Subsequently, tensile tests were performed to characterize the mechanical behaviour of hollow filaments and to evaluate the differences between stretched and non-stretched filaments. In general, an increase of the linear density causes the increase in the size of the filament cross section. With the increase of structure orientation of filaments, induced by stretching, breaking tenacity increases and elongation at break decreases. The production of hollow fibers, with the required characteristics, is one of the key steps to create a brain phantom that properly mimics the human brain that may be used for the validation and calibration of HDFT, an imaging approach that is expected to contribute significantly to the areas of brain related research.

Wear of PEEK-Ti6Al4V systems under micro-abrasion and linear sliding conditions

Dissertação de mestrado integrado em Engenharia Biomédica

Desenvolvimento e otimização do projeto mecatrónico para um Tribómetro Linear

Dissertação de mestrado integrado em Engenharia Mecânica

Brazilian norms for the International Affective Picture System (IAPS): comparison of the affective ratings for new stimuli between Brazilian and North-American subjects

OBJECTIVE: The study presents the Brazilian norms for 240 new stimuli from International Affective Picture System (IAPS), a database of affective images widely used in research, compared to the North-American normative ratings. METHODS: The participants were 448 Brazilian university students from several courses (269 women and 179 men) with mean age of 24.2 (SD = 7.8), that evaluated the IAPS pictures in the valence, arousal and dominance dimensions by the Self-Assessment Manikin (SAM) scales. Data were compared across the populations by Pearson linear correlation and Student's t-tests. RESULTS: Correlations were highly significant for all dimensions; however, Brazilians' averages for arousal were higher than North-Americans'. CONCLUSIONS: The results show stability in relation to the first part of the Brazilian standardization and they are also consistent with the North-American standards, despite minor differences relating to interpretation of the arousal dimension, demonstrating that IAPS is a reliable instrument for experimental studies in the Brazilian population.

Nanocomposites: the contribution of multiscale modelling to improve the dispersion levels

Tese de Doutoramento em Ciência e Engenharia de Polímeros e Compósitos