Antimicrobial efficacy of tobramycin polymeric nanoparticles for Pseudomonas aeruginosa infections in cystic fibrosis: formulation, characterisation and functionalisation with dornase alfa (DNase).

Inhaled antibiotics, such as tobramycin, for the treatment of Pseudomonas aeruginosa pulmonary infections are associated with the increase in life expectancy seen in cystic fibrosis (CF) patients over recent years. However, the effectiveness of this aminoglycoside is still limited by its inability to penetrate the thick DNA-rich mucus in the lungs of these patients, leading to low antibiotic exposure to resident bacteria. In this study, we created novel polymeric nanoparticle (NP) delivery vehicles for tobramycin. Using isothermal titration calorimetry, we showed that tobramycin binds with alginate polymer and, by exploiting this interaction, optimised the production of tobramycin alginate/chitosan NPs. It was established that NP antimicrobial activity against P. aeruginosa PA01 was equivalent to unencapsulated tobramycin (minimum inhibitory concentration 0.625 mg/L). Galleria mellonella was employed as an in vivo model for P. aeruginosa infection. Survival rates of 90% were observed following injection of NPs, inferring low NP toxicity. After infection with P. aeruginosa, we showed that a lethal inoculum was effectively cleared by tobramycin NPs in a dose dependent manner. Crucially, a treatment with NPs prior to infection provided a longer window of antibiotic protection, doubling survival rates from 40% with free tobramycin to 80% with NP treatment. Tobramycin NPs were then functionalised with dornase alfa (recombinant human deoxyribonuclease I, DNase), demonstrating DNA degradation and improved NP penetration of CF sputum. Following incubation with CF sputum, tobramycin NPs both with and without DNase functionalisation, exhibited anti-pseudomonal effects. Overall, this work demonstrates the production of effective antimicrobial NPs, which may have clinical utility as mucus-penetrating tobramycin delivery vehicles, combining two widely used CF therapeutics into a single NP formulation. This nano-antibiotic represents a strategy to overcome the mucus barrier, increase local drug concentrations, avoid systemic adverse effects and improve outcomes for pulmonary infections in CF.

Solubility parameter based screening methods for early stage formulation development of itraconazole amorphous solid dispersions

Objectives: This article uses conventional and newly extended solubility parameter (δ) methods to identify polymeric materials capable of forming amorphous dispersions with itraconazole (itz). Methods: Combinations of itz and Soluplus, Eudragit E PO (EPO), Kollidon 17PF (17PF) or Kollidon VA64 (VA64) were prepared as amorphous solid dispersions using quench cooling and hot melt extrusion. Storage stability was evaluated under a range of conditions using differential scanning calorimetry and powder X-ray diffraction. Key findings: The rank order of itz miscibility with polymers using both conventional and novel δ-based approaches was 17PF > VA64 > Soluplus > EPO, and the application of the Flory–Huggins lattice model to itz–excipient binary systems corroborated the findings. The solid-state characterisation analyses of the formulations manufactured by melt extrusion correlated well with pre-formulation screening. Long-term storage studies showed that the physical stability of 17PF/vitamin E TPGS–itz was poor compared with Soluplus and VA64 formulations, and for EPO/itz systems variation in stability may be observed depending on the preparation method. Conclusion: Results have demonstrated that although δ-based screening may be useful in predicting the initial state of amorphous solid dispersions, assessment of the physical behaviour of the formulations at relevant temperatures may be more appropriate for the successful development of commercially acceptable amorphous drug products.

Using Flory-Huggins phase diagrams as a pre-formulation tool for the production of amorphous solid dispersions; a comparison between hot-melt extrusion and spray drying

Objectives: Amorphous drug forms provide a useful method of enhancing the dissolution performance of poorly water-soluble drugs; however, they are inherently unstable. In this article, we have used Flory–Huggins theory to predict drug solubility and miscibility in polymer candidates, and used this information to compare spray drying and melt extrusion as processes to manufacture solid dispersions.
Method:  Solid dispersions were characterised using a combination of thermal (thermogravimetric analysis and differential scanning calorimetry) and spectroscopic (Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction methods. 
Key Findings: Spray drying permitted generation of amorphous solid dispersions to be produced across a wider drug concentration than melt extrusion. Melt extrusion provided sufficient energy for more intimate mixing to be achieved between drug and polymer, which may improve physical stability. It was also confirmed that stronger drug–polymer interactions might be generated through melt extrusion. Remixing and dissolution of recrystallised felodipine into the polymeric matrices did occur during the modulated differential scanning calorimetry analysis, but the complementary information provided from FTIR confirms that all freshly prepared spray-dried samples were amorphous with the existence of amorphous drug domains within high drug-loaded samples. 
Conclusion: Using temperature–composition phase diagrams to probe the relevance of temperature and drug composition in specific polymer candidates facilitates polymer screening for the purpose of formulating solid dispersions.

Biodiesel fuel formulation

O consumo de energia a nível mundial aumenta a cada dia, de forma inversa aos recursos fósseis que decrescem de dia para dia. O sector dos transportes é o maior consumidor deste recurso. Face ao actual cenário urge encontrar uma solução renovável e sustentável que permita não só, diminuir a nossa dependência de combustíveis fósseis mas fundamentalmente promover a sua substituição por energias de fontes renováveis. O biodiesel apresenta-se na vanguarda das alternativas aos combustiveis derivados do petróleo, para o sector dos transportes, sendo considerado uma importante opção a curto prazo, uma vez que o seu preço pode ser competitivo com o diesel convencional, e para a sua utilização o motor de combustão não necessita de alterações. O biodiesel é uma mistura líquida, não tóxica, biodegradável de ésteres de ácidos gordos, sem teor de enxofre ou compostos aromáticos, apresenta boa lubricidade, alto número de cetano, e origina emissões gasosas mais limpas. O presente trabalho contribui para um melhor conhecimento da dependência das propriedades termofisicas do biodiesel com a sua composição. A publicação de novos dados permitirá o desenvolvimento de modelos mais fiáveis na previsão do comportamento do biodiesel. As propriedades densidade e viscosidade são o espelho da composição do biodiesel, uma vez que dependem directamente da matéria prima que lhe deu origem, mais do que do processo de produção. Neste trabalho os dados medidos de densidade e viscosidade de biodiesel foram testados com vários modelos e inclusivamente foram propostos novos modelos ajustados para esta família de compostos. Os dados medidos abrangem uma ampla gama de temperaturas e no caso da densidade também foram medidos dados a alta pressão de biodiesel e de alguns ésteres metilico puros. Neste trabalho também são apresentados dados experimentais para o equilíbrio de fases sólido-liquído de biodiesel e equlibrio de fases líquidolíquido de alguns sistemas importantes para a produção de biodiesel. Ambos os tipos de equilíbrio foram descritos por modelos desenvolvidos no nosso laboratório. Uma importância especial é dado aqui a propriedades que dependem do perfil de ácidos gordos da matéria-prima além de densidade e viscosidade; o índice de iodo e temperature limite de filtrabalidade são aqui avaliados com base nas considerações das normas. Os ácidos gordos livres são um sub-produto de refinação de óleo alimentar, que são removidos na desodoração, no processo de purificação do óleo. A catálise enzimática é aqui abordada como alternativa para a conversão destes ácidos gordos livres em biodiesel. Estudou-se a capacidade da lipase da Candida antartica (Novozym 435) para promover a esterificação de ácidos gordos livres com metanol ou etanol, utilizando metodologia de superfície de resposta com planeamento experimental. Avaliou-se a influência de diversas variáveis no rendimento da reacção.

Lagrangian transport of particles in Ria de Aveiro lagoon, Portugal

A two-dimensional vertically integrated hydrodynamic model coupled to a particle tracking model is applied to study the dispersion processes and residence time in Ria de Aveiro lagoon (Portugal). The only dispersion process that is considered in this study is the advection, according to the main characteristics of the local hydrodynamic. The particle tracking model computes the particles position at each time step, using a fourth-order Runge-Kutta integration method. The dispersion of passive particles released along the lagoon and in critical areas are studied in this work. The residence time is also determined for the entire lagoon. The results show that the mixture between particles coming from different channels of the lagoon is negligible in a time scale higher than 2 tidal cycles. The residence time for the lagoon central area is about 2 days, revealing a strong marine influence in this area. At the upper reaches of the channels were found values higher than 2 weeks.

A new formulation of the learning problem for a neural network controller

In this paper we consider the learning problem for a class of multilayer perceptrons which is practically relevant in control systems applications. By reformulating this problem, a new criterion is developed, which reduces the number of iterations required for the learning phase.

Determination of Alternaria spp. Habitats Using 7-Day Volumetric Spore Trap, Hybrid Single Particle Lagrangian Integrated Trajectory Model and Geographic Information System

There are many species among the Alternaria genus, which hosts on economically important crops causing significant yield losses. Less attention has been paid to fungi hosting on plants constituting substantial components of pastures and meadows. Alternaria spp. spores are also recognised as important allergens. A 7-day volumetric spore trap was used to monitor the concentration of airborne fungal spores. Air samples were collected in Worcester, England (2006–2010). Days with a high spore count were then selected. The longest episode that occurred within a five year study was chosen for modelling. Two source maps presenting distribution of crops under rotation and pastures in the UK were produced. Back trajectories were calculated using the HYSPLIT model. In ArcGIS clusters of trajectories were studied in connection with source maps by including the height above ground level and the speed of the air masses. During the episode no evidence for a long distance transport from the continent of Alternaria spp. spores was detected. The overall direction of the air masses fell within the range from South-West to North. The back trajectories indicated that the most important sources of Alternaria spp. spores were located in the West Midlands of England.

Detecting a shallow surface layer in Barkley Sound from Lagrangian drifter trajectories

Senior thesis written for Oceanography 444

Multiagent system for adaptive strategy formulation in electricity markets

Electricity markets are complex environments with very particular characteristics. MASCEM is a market simulator developed to allow deep studies of the interactions between the players that take part in the electricity market negotiations. This paper presents a new proposal for the definition of MASCEM players’ strategies to negotiate in the market. The proposed methodology is multiagent based, using reinforcement learning algorithms to provide players with the capabilities to perceive the changes in the environment, while adapting their bids formulation according to their needs, using a set of different techniques that are at their disposal.

Influence of grease formulation on thrust bearings power loss

The minimization of the power loss and the use of the biodegradable greases have attracting considerable attention. To compare the energetic performance of biodegradable lubricant greases, power loss tests were performed on a modified four-ball machine. A correlation between the grease formulation and rheology was established with its energetic performance

Role of Intersectoral Collaboration in Mental Health Policy Formulation And Service Delivery in Saint Lucia

RESUMO: Santa Lúcia pequena ilha de país em desenvolvimento com recursos limitados e é confrontada com uma série de desafios socioeconômicos que exigem soluções criativas e inovadoras. É comprovado que a combinação de recursos entre setores para estabelecer os determinantes social, econômico e ambiental da saúde são uma estratégia útil para melhorar a saúde da população, principalmente a sua saúde mental. Este estudo, o primeiro do seu tipo em Santa Lúcia, procurou examinar até que ponto a disponibilidade de uma política nacional de saúde mental levou a ação intersetorial para o fornecimento de serviços e promoção da saúde mental. Além disso, o estudo examinou o nível de colaboração intersetorial que existe entre as agências que prestam cuidados diretos e serviços de suporte para pessoas com doenças mentais e problemas sérios de saúde mental. O estudo também teve como objetivo identificar os fatores que promovem ou dificultam a colaboração intersectorial e gerar recomendações que possam ser aplicadas para países muito pequenos e com perfis socioeconômicos semelhantes. Os dados gerados a partir de três (3) fontes foram sintetizados para formar uma visão ampla das questões. Uma avaliação da política de saúde mental de 2007, uma avaliação que identifica até que ponto a ação intersetorial atualmente deixa a prestação de serviços de saúde mental e a administração de entrevistas semiestruturadas nas mãos de gestores do programa de diferentes agências em todos os setores. O estudo concluiu que, apesar da disponibilidade de uma política de saúde mental, que articula clara e explicitamente a colaboração intersetorial como área prioritária para ação, quase não existe no sistema de fornecimento atual do serviço. Os provedores de serviços em todos os setores reconhecem que há os benefícios da colaboração intersectorial e com entraves significativos em relação à colaboração intersetorial, que por sua vez, impede uma abordagem nacional para o planejamento e o fornecimento do serviço. A colaboração intersetorial não será possível se os próprios setores dependerem da abordagem direta do setor da saúde ou se a atmosfera geral for ofuscada pela estigmatização das doenças mentais.------------------------------------------------------------------------ABSTRACT: Saint Lucia a small island developing country with limited resources, is faced with a number of socio-economic challenges which require creative and innovative solutions to address. Combining resources across sectors to address the social, economic and environmental determinants of health has proven to be a useful strategy for improving population health in particular mental health. This study, the first of its kind for Saint Lucia sought to examine the extent to which the availability of a national mental health policy led to intersectoral action for mental health promotion and service delivery. In addition the study examined the level of intersectoral collaboration which actually exist between agencies which provide direct care and support services to people with mental illnesses and significant mental health problems. The study also aimed to identify the factors which promote or hinder intersectoral collaboration and generate recommendations which can be applied to extremely small countries with similar socio-economic profiles. Data generated from three (3) sources was synthesized to form a broad picture of the issues. An evaluation of the mental health policy of 2007, an assessment of the extent to which intersectoral action currently exist in mental health service delivery and the administration of semi-structured interviews with program managers from different agencies across sectors to identify implementation issues. The study concluded that despite the availability of a mental health policy which clearly and explicitly articulates intersectoral collaboration as a priority area for action, very little exists in the current service delivery system. Services providers across sectors acknowledge the benefits of intersectoral collaboration and that there are significant barriers to intersectoral collaboration, which in turn hinders a national approach to service planning and delivery. Intersectoral collaboration is not possible if sectors themselves are dependent on a top-down health sector driven and dominated approach, or if the general atmosphere is clouded by stigmatization of mental health illnesses.