Invertebrate communities in northern Lake Victoria, with reference to their potential for fishery production

The zooplankton and macrobenthic communities of Lake Victoria were sampled by lift net and Ponar grab, respectively. The zooplankton comprised copepods and cladocerans, rotifers and aquatic insect larvae. Most taxa exhibited wide distribution in the lake, with the exception of rotifers which were rare in deep offshore waters. The main components in the macro-benthos were chaoborid and chironomid larvae and molluscs. Caridina nilotica (Roux) and other groups were rare in the samples. Zooplankton density ranged from 100000 or more to 4 million ind. m2 and increased from the shallow inshore to deep offshore waters. Numerical dominance of cyclopoids and nauplius larvae was a common feature at all stations sampled. Most macrobenthic taxa were also widely distributed, although chaoborid and chironomid larvae were rare in the samples. Rastrineobola argentea (Pellegrin) and larval Lates niloticus (L.) ate mainly cyclopoid copepods, while cichlids showed a strong preference for adult insects. High ecological stability of the cyclopoids, and the zooplankton community in general, despite radical ecosystem changes in recent years, coupled with what appears to be high predation pressure, offers good prospects for the pelagic fishery in the lake.

An investigation of wind tunnel wall effects at high Mach numbers

This paper presents the results of an investigation of wind tunnel wall interference in a two-dimensional wind tunnel at high Mach numbers. The results are presented in the form of curves of lift coefficient versus the ratio of model chord to tunnel height, as functions of Mach number and angle of attack. The investigation was carried out by the authors at the Guggenheim Aeronautical Laboratory of the California Institute of Technology during the school year 1944-45.

Tests were carried out on the NACA low drag airfoil section 65,1-012 at Mach numbers from .60 to .80, and angles of attack of from 1 to 3 degrees. Models were 1", 2", 4" and 6" chord, giving values of the chord to tunnel height ration of .1 to .6. Schlieren photographs were made of shock waves where they occurred.

The unsteady forces on slender delta wing hydrofoils oscillating in heave

The investigations described herein are both experimental and theoretical. An experimental technique is described by which the models tested could be oscillated sinusoidally in heave. The apparatus used to gather the unsteady lift, drag and pitching moment data is also described.

The models tested were two flat delta wings with apex angles of 15° and 30° and they had sharp leading edges to insure flow separation. The models were fabricated from 0.25 inch aluminum plate and were approximately one foot in length.

Three distinct types of flow were investigated: 1) fully wetted, 2) ventilated and 3) planing. The experimental data are compared with existing theories for steady motions in the case of fully wetted delta wings. Ventilation measurements, made only for the 30° model at 20° angle of attack, of lift and drag are presented.

A correction of the theory proposed by M.P. Tulin for high speed planing of slender bodies is presented and it is extended to unsteady motions. This is compared to the experimental measurements made at 6° and 12° angle of attack for the two models previously described.

This is the first extensive measurement of unsteady drag for any shape wing, the first measurement of unsteady planing forces, the first quantitative documentation of unstable oscillations near a free surface, and the first measurements of the unsteady forces on ventilated delta wings. The results of these investigations, both theoretical and experimental, are discussed and further investigations suggested.

A bibliography of samplers for benthic invertebrates

This annotated bibliography covers literature to the end of November 1977, and includes references to samplers that could be used for the rapid removal of benthic invertebrates from natural substrata of rivers and streams. Marine samplers which have been, or could be, used in freshwater. Coverage of Russian literature is incomplete, although a selection of recent and important references are included. The references are arranged under the following headings, Reviews; Nets and quadrat samplers; Scoops, shovels and dredges; Grabs; Corers; Suction and air-lift samplers; Electroshocking samplers; Efficiencies and comparisons; and Samplers from catalogues. There is an index to samplers (by the common name) and an author index.

Spin-helical Dirac states in graphene induced by polar-substrate surfaces with giant spin-orbit interaction: a new platform for spintronics

Spintronics, or spin electronics, is aimed at efficient control and manipulation of spin degrees of freedom in electron systems. To comply with demands of nowaday spintronics, the studies of electron systems hosting giant spin-orbit-split electron states have become one of the most important problems providing us with a basis for desirable spintronics devices. In construction of such devices, it is also tempting to involve graphene, which has attracted great attention because of its unique and remarkable electronic properties and was recognized as a viable replacement for silicon in electronics. In this case, a challenging goal is to lift spin degeneracy of graphene Dirac states. Here, we propose a novel pathway to achieve this goal by means of coupling of graphene and polar-substrate surface states with giant Rashba-type spin-splitting. We theoretically demonstrate it by constructing the graphene@BiTeCl system, which appears to possess spin-helical graphene Dirac states caused by the strong interaction of Dirac and Rashba electrons. We anticipate that our findings will stimulate rapid growth in theoretical and experimental investigations of graphene Dirac states with real spin-momentum locking, which can revolutionize the graphene spintronics and become a reliable base for prospective spintronics applications.

1998 fisheries statistics, Lake Kariba - Zimbabwe shore

The report contains data, statistics and information for both the pelagic and inshore fisheries of Lake Kariba for the year 1998. Time series data and notes for the 2 fisheries are included. The pelagic fishery exploits kapenta, the freshwater sardine Limnothrissa miodon, and is carried out all year round using light for attracting the fish. Two types of fishing vessel designs are in use (the pontoon-catamarans and the displacement monohulls) and the type of gear used is the lift net. The inshore fishery distinguishes the fishery that uses gillnets and exploits the indigenous Zambezi River fish species. This fishery is restricted to the lakeshore and uses 3 types of boats - the dugout canoe, fibreglass and metal boats.

Effects of seasonal change on activity rhythms and swimming behavior of age-0 bluefish (Pomatomus saltatrix) and a description of gliding behavior

Daily and seasonal activity rhythms, swimming speed, and modes of swimming were studied in a school of spring-spawned age-0 bluefish (Pomatomus saltatrix) for nine months in a 121-kL research aquarium. Temperature was lowered from 20° to 15°C, then returned to 20°C to match the seasonal cycle. The fish grew from a mean 198 mm to 320 mm (n= 67). Bluefish swam faster and in a more organized school during day (overall mean 47 cm/s) than at night (31 cm/s). Swimming speed declined in fall as temperature declined and accelerated in spring in response to change in photoperiod. Besides powered swimming, bluefish used a gliding-upswimming mode, which has not been previously described for this species. To glide, a bluefish rolled onto its side, ceased body and tail beating, and coasted diagonally downward. Bluefish glided in all months of the study, usually in the dark, and most intensely in winter. Energy savings while the fish is gliding and upswimming may be as much as 20% of the energy used in powered swimming. Additional savings accrue from increased lift due to the hydrofoil created by the horizontal body orientation and slightly concave shape. Energy-saving swimming would be advantageous during migration and overwintering.

Application of Suction-cup-attached VHF Transmitters to the Study of Beluga, Delphinapterus leucas, Surfacing Behavior in Cook Inlet, Alaska

Suction-cup-attached VHF radio transmittes were deployed on belugas, Delphinapterus leucas, in Cook Inlet, Alaska, in 1994 and 1995 to characterize the whales' surfacing behavior. Data from video recordings were also used to characterize behavior of undisturbed whales and whales actively pursued for tagging. Statistics for dive intervals (time between the midpoints of contiguous surfacings) and surfacing intevals (time at the surface per surfacing) were estimated. Operations took place on the tidal delta of the Susitna and Little Susitna Rivers. During the 2-yr study, eight whales were successfully tagged, five tags remained attached for >60 min, and data from these were used in the analyses. Mean dive interval was 24.1 sec (interwhale SD=6.4 sec, n=5). The mean surfacing interval, as determined from the duration of signals received from the radio transmitters, was 1.8 sec (SD=0.3 sec, n=125) for one of the whales. Videotaped behaviors were categorized as "head-lifts" or "slow-rolls." Belugas were more likely to head-lift than to slow-roll during vessel approaches and tagging attempts when compared to undisturbed whales. In undisturbed groups, surfacing intervals determined from video records were significantly different between head-lifting (average = 1.02 sect, SD=0.38 sed, n=28) and slow-rolling whales (average = 2.45 sec, SD=0.37 sec, n=106). Undisturbed juveniles exhibited shorter slow-roll surfacing intervals (average = 2.25 sec, SD=0.32 sec, n=36) than adults (average = 2.55 sec, SD=0.36 sec, n=70). We did not observe strong reactions by the belugas to the suction-cup tags. This tagging method shows promise for obtaining surfacing data for durations of several days.

A Review of the South Pacific Tuna Baitfisheries: Small Pelagic Fisheries Associated with Coral-Reefs

A review is given of current information concerning small pelagic fishes exploited for tuna bait in the South Pacific. These fishes are usually caught over or near coral reefs using light attraction and lift nets. The most common and widespread species are anchovies (Engraulidae), sprats (Clupeidae), silversides (Atherinidae), and herrings (Clupeidae). Recorded yields ranged from 0.5 to 2.6t/km2, and methods are described to estimate potential yields empirically in the absence of catch data. Environmental effects on small pelagic fish production are discussed, and evidence is presented to suggest that rainfall markedly affects stolephorid anchovy production. Some species of small pelagic fish, such as Selar spp., Decapterus spp., and Herklotsichthys sp., have been fished traditionally by artisanal fishermen, but anchovy and sprat stocks were probably unexploited prior to pole-and-line tuna fishing in the South Pacific.

Larval rearing of Macrobrachium rosenbergii (De Man) in artificial sea water

Larvae of Macrobrachium rosenbergii were successfully reared in artificial sea water prepared in fresh ground water. The water was circulated through a biological filter by means of air-lift pumps for a period of one week to remove the undissolved particles prior to use in the hatchery operation. The experiments were initiated during 1989 and the hatchery has been working on pilot scale since June, 1990. The larvae in all the experiments were fed with egg-custard, Mona and Artemia nauplii. The survival rate varied from 5 to 52% in the 12 experiments. These findings can add to the development of hatcheries in the inland areas which can further boost the popularization of giant freshwater prawn farming.

Study on fishing gears, species selectivity toward gears and catch composition of BSKB beel, Khulna, Bangladesh

An investigation on the types of fishing gear used and their species selectivity and effects on fishes of BSKB beel in Khulna was conducted from June '95 to January '96. Fishermen were found to follow 6 fishing techniques viz., netting, trapping, angling, spearing, dewatering and hand picking. Among them 23 types of the fishing gear was recorded to be used by the fishermen of which 7, 8, 4 and 4 are nets, traps, hooks and lines, and hand harpoon respectively. A total of 47 species of fish were identified in the catches of different gears used by the fishermen in BSKB beel. Particulars, mode of operation, fishing season and catch composition of different fishing gears were determined. Seine, cast and lift net, traps (charo, arinda and ghuni), and hooks and lines (dhawn and nol broshi) were recorded as nonselective gear considering the fish species caught. However, gill nets (punti, koi and fash jal), clasp nets (bhuti jal), some traps (khadom, tubo), hooks and lines (chip borshi, chasra) and all spears were used as more or less selective gear. With respect to species and its size fash jal, bhuti jal, trap (khadom, ramani), and koach, juti and jhupi among spears were regarded to be more or less large-species-gear. But punti jal, koi jal, trap (koi dughair, charo, tubo, arinda and ghuni), nol borshi and spear (ful-kuchi) were small-species-gear. Among all gears seine net, cast net, lift net, koi dughair and ramani were recorded deleterious for carps especially for stocked fingerlings. For relatively small sized wild fishes koi jal, punti jal and ghuni traps were identified as detrimental gear.

East African Fisheries Research Organization Annual Report 1955/1956

This report covers the period 1st July, 1955, to 30th June, 1956. As printing has been delayed for various reasons, reference should be made to certain important proposals put forward since the 30th June. Just after the close of the year a meeting of the Lake Victoria Fisheries Board was held at Entebbe on 26th July. At this meeting disagreement arose between the representatives of the three East African Governments on the subject of whether or not existing restrictions on fishing in Lake Victoria should be retained. This organization holds strongly to the view that the existing restrictions on fishing should be retained, Kenya holds similar views, but Uganda and Tanganyika were in favour of a proposal to lift these restrictions. This question was discussed a month earlier by the Director with the Colonial Office Fisheries Advisory Committee and they also advised the Lake Victoria Fisheries Board against lifting the restrictions.

Deposition of small particles from turbulent flows

This paper deals with particle deposition onto solid walls from turbulent flows. The aim of the study is to model particle deposition in industrial flows, such as the one in gas turbines. The numerical study has been carried out with a two fluid approach. The possible contribution to the deposition from Brownian diffusion, turbulent diffusion and shear-induced lift force are considered in the study. Three types of turbulent two-phase flows have been studied: turbulent channel flow, turbulent flow in a bent duct and turbulent flow in a turbine blade cascade. In the turbulent channel flow case, the numerical results from a two-dimensional code show good agreement with numerical and experimental results from other resources. Deposition problem in a bent duct flow is introduced to study the effect of curvature. Finally, the deposition of small particles on a cascade of turbine blades is simulated. The results show that the current two fluid models are capable of predicting particle deposition rates in complex industrial flows.

Development of blade profiles for low pressure turbine applications

This paper describes a program of work, largely experimental, which was undertaken with the objective of developing an improved blade profile for the low-pressure turbine in aero-engine applications. Preliminary experiments were conducted using a novel technique. An existing cascade of datum blades was modified to enable the pressure distribution on the suction surface of one of the blades to be altered. Various means, such as shaped inserts, an adjustable flap at the trailing edge, and changing stagger were employed to change the geometry of the passage. These experiments provided boundary layer and lift data for a wide range of suction surface pressure distributions. The data was then used as a guide for the development of new blade profiles. The new blade profiles were then investigated in a low-speed cascade that included a set of moving bars upstream of the cascade of blades to simulate the effect of the incoming wakes from the previous blade row in a multistage turbine environment.

Vortex filament simulation of trailing vortex merger

Aircraft in high-lift configuration shed multiple vortices. These generally merge to form a downstream wake consisting of two counter-rotating vortices of equal strength. The understanding of the merger of two co-rotating trailing vortices is important in evaluating the separation criteria for different aircraft to prevent wake vortex hazards during landing and take-off. There is no existing theoretical method on the basis of which such norms can be set. The present study is aimed at gaining a better understanding of the behaviour of wake vortices behind the aircraft. Two dimensional studies are carried out using the vortex blob method and compared with Bertenyi's experiment. It is shown that inviscid two dimensional effects are insufficient to explain the observations. Three dimensional studies, using the vortex filament method, are applied to the same test case. Two Lamb-Oseen profile vortices of the same dimensions and initial separation as the experiment are allowed to evolve from a straight starting condition until a converged steady flow is achieved. The results obtained show good agreement with the experimental distance to merger. Core radius and separation behaviour is qualitatively similar to experiment, with the exception of rapid increases at first. This may be partially attributable to the choice of filament-element length, and recommended further work includes a convergence study for this parameter. Copyright © 2005 by the American Institute of Aeronautics and Astronautics, Inc. All rights reserved.