Diversity of the land resources in the Amazonian State of Rondônia, Brazil

Conflicting opinions are recorded in the literature concerning the suitability of Amazon lands for sustainable agriculture following deforestation. This article has been written to shed light on this question by summarizing climate, landform, soil and vegetation features from the findings of a land resource study of the Brazilian state of Rondônia in south-west Amazonia. The work, which followed the World Soils and Terrain Digital Database (SOTER) methodology, was financed by the World Bank. During the course of the survey special emphasis was given to studying soils; 2914 profiles were analyzed and recorded. The study identified a complex pattern of land units with clear differences in climate, landform, soils and native vegetation. Forested areas mosaic with lesser areas of natural savannas. The latter occur on both poorly-drained and well-drained, albeit nutrient deficient sandy soils. The tallest and most vigorous forests or their remnants were seen growing on well-drained soils formed from nutrient-rich parent materials. Many of these soils could, or are being used for productive agriculture. Soils developed on nutrient-poor parent materials support forests that are significantly lower in height, and would require large lime and fertilizer inputs for agriculture. Low forests with high palm populations and minor areas of wet land savannas cover the poorly drained soils. It is evident that forest clearing in the past was indiscriminant; this cannot be condoned. The diversity of land conditions found throughout Rondônia would suggest that many past studies in the Amazon have simply been too broad to identify significant soil differences.

Search for the Standard Model Higgs boson produced in association with top quarks and decaying into bb in pp collisions at √s = 8 TeV with the ATLAS detector

A search for the Standard Model Higgs boson produced in association with a pair of top quarks, tt¯H, is presented. The analysis uses 20.3 fb−1 of pp collision data at s√ = 8 TeV, collected with the ATLAS detector at the Large Hadron Collider during 2012. The search is designed for the H to bb¯ decay mode and uses events containing one or two electrons or muons. In order to improve the sensitivity of the search, events are categorised according to their jet and b-tagged jet multiplicities. A neural network is used to discriminate between signal and background events, the latter being dominated by tt¯+jets production. In the single-lepton channel, variables calculated using a matrix element method are included as inputs to the neural network to improve discrimination of the irreducible tt¯+bb¯ background. No significant excess of events above the background expectation is found and an observed (expected) limit of 3.4 (2.2) times the Standard Model cross section is obtained at 95% confidence level. The ratio of the measured tt¯H signal cross section to the Standard Model expectation is found to be μ=1.5±1.1 assuming a Higgs boson mass of 125 GeV.

Redes de inovação em pequenas e médias empresas: um estudo de caso no setor têxtil

Dissertação de mestrado em Engenharia Industrial

Chemical composition of phytoplankton from the estuaries of Eastern Amazonia

Phytoplankton is important bioindicator of chemical and biological modifications of natural ecosystems. The objective of this study was to determine the total chemical composition of the phytoplankton of the Pará and Mocajuba estuaries on the eastern coast of the Amazon region in the Brazilian state of Pará. The chemical composition of the surface water, bottom sediments (total sample and bioavailable fraction), and the phytoplankton were determined by inductively coupled plasma optical emission spectrometry. Phytoplankton contained high concentrations of Ca, P, Mn, Fe, Zn, Al, Ba, and Pb. The phytoplankton of the Mocajuba estuary is rich in Fe (2,967-84,750 µg g-1), while those from the Pará is rich in Al (1,216-15,389 µgg-1), probably reflecting divergent anthropogenic inputs. Both samples indicated a high bioconcentration factor derived from both the water and the bioavailable fraction, reflecting the efficiency of these organisms in the concentration of metals.

Assessment of the mechanical performance of recycled unbound materials for pavement subbase layers

The cyclic load triaxial test is a laboratory test that allows studying the mechanical behaviour of unbound granular materials used in base/subbase layers of road pavements. The resilient modulus and permanent strains are required as inputs in structural pavement design. This paper presents some results obtained for recycled materials (crushed concrete aggregate and blended crushed waste aggregate), with a view to promoting their use in pavement structures. Results relating to a reference material (limestone) are also presented, for comparison. All the test results discussed in this paper were obtained in variable cyclic radial pressure (VCP) tests. The tests performed (VCP) aim to study the influence of water content on the resilient modulus of recycled materials, as well as on the resistance to permanent deformation. Using the experimental data as a basis, further modelling work was carried out to establish the stresses developing in base/capping layers in typical Belgian road pavements. These numerical results allow to propose some simplifications of the stress paths applied in the testing procedures and to establish a new test protocol that also considers compaction during construction works. The results of this research work provide an excellent set of findings for the mechanical characterization of unbound base materials through the cyclic triaxial test, and contribute to a better understanding and correct application of recycled materials under geotechnical engineering background

Cibercultura e Sub-culturas: Estética Digital

Introdução: informação, conteúdos, saberes: Os conteúdos digitais; Projeto 1: A vida quotidiana dos infonautas; Netiquette; Produção e consumo cultural na sociedade da informação; Cibercultura e vida académica; Media studies e new media studies; Diversas áreas de pesquisa; Proliferação de questões; Reflexividade dos especialistas do saber prático; A falência das antigas certezas. Estética digital: Sean Cubbit: Digital Aesthetics; Computação estética; Natureza da arte digital; Interfaces; o iPhone e iPad; o Windows 8; Design da interação digital; Luvas de realidade virtual; Inputs diretos da eletricidade cerebral; o Sistema de interação com múltiplas interfaces.

A integração de técnicas BIM (Building Information Modeling) no projeto e na construção de estruturas de madeira

Dissertação de mestrado integrado em Engenharia Civil

Seismic behavior of concrete block masonry buildings

Tese de Doutoramento em Engenharia Civil

Algorithms and computational tools for metabolic flux analysis

PhD thesis in Biomedical Engineering

A critical evaluation of methods for the reconstruction of tissue-specific models

Under the framework of constraint based modeling, genome-scale metabolic models (GSMMs) have been used for several tasks, such as metabolic engineering and phenotype prediction. More recently, their application in health related research has spanned drug discovery, biomarker identification and host-pathogen interactions, targeting diseases such as cancer, Alzheimer, obesity or diabetes. In the last years, the development of novel techniques for genome sequencing and other high-throughput methods, together with advances in Bioinformatics, allowed the reconstruction of GSMMs for human cells. Considering the diversity of cell types and tissues present in the human body, it is imperative to develop tissue-specific metabolic models. Methods to automatically generate these models, based on generic human metabolic models and a plethora of omics data, have been proposed. However, their results have not yet been adequately and critically evaluated and compared. This work presents a survey of the most important tissue or cell type specific metabolic model reconstruction methods, which use literature, transcriptomics, proteomics and metabolomics data, together with a global template model. As a case study, we analyzed the consistency between several omics data sources and reconstructed distinct metabolic models of hepatocytes using different methods and data sources as inputs. The results show that omics data sources have a poor overlapping and, in some cases, are even contradictory. Additionally, the hepatocyte metabolic models generated are in many cases not able to perform metabolic functions known to be present in the liver tissue. We conclude that reliable methods for a priori omics data integration are required to support the reconstruction of complex models of human cells.

Movilidad social en barrios de Córdoba: Villa La Tela y áreas colindantes. Social Mobility in Neighborhoods of Cordoba: Villa La Tela and Adjacent Areas.

Esta investigación propone aproximarse al conocimiento y comprensión de los diversos mecanismos de movilidad social en Villa La Tela barrios adyacentes (ciudad de Córdoba). Si bien las poblaciones objetivo poseen diferentes niveles de vida, este proyecto no se propone la comparación entre ambos sectores urbanos, sino la identificación de diversos patrones de movilidad social vigentes. Se intenta también aproximarse indirectamente al esquema de estratificación social vigente en la ciudad de Córdoba. El equipo se propone avanzar en la definición de una estrategia metodológica que permita comprender de una manera integral los diversos mecanismos de movilidad social. Se propone articular una triangulación de métodos cuantitativos y cualitativos que aproveche las fortalezas de cada enfoque para efectuar una mirada multidisciplinaria de las condiciones de vida de la población en estudio. Se intenta también aprovechar la inserción que ya tienen algunos de los investigadores del equipo en los barrios, a fin de aportar conocimientos útiles a las organizaciones que realizan actividades de intervención social. El trabajo se propone en tres fases constituidas por tres instancias que no necesariamente se corresponden con tiempos cronológicos: análisis de información secundaria (censos de población, relevamientos de organismos gubernamentales y civiles) y de resultados de investigaciones previas; en otra fase se generará un espacio recreativo en la comunidad que permita identificar las percepciones subjetivas de los actores locales en relación a las condiciones de vida y la experiencia de movilidad social (etnodrama, etnografía fotográfica); finalmente se realizará una fase de trabajo de encuestas y entrevistas en profundidad a partir de los insumos producidos en las dos fases antes mencionadas. Se tomará para ello, como unidad de análisis socio-económica a los hogares, considerados como el espacio físico y social desde el cual se diseñan e implementan las estrategias familiares de vida de sus miembros. Se considera que el proyecto puede transferir los resultados -parciales y finales- alcanzados a las instituciones intervinientes en los barrios considerados. Esta transferencia constituye una actividad de extensión concreta, dado que las intervenciones en marcha están destinadas a mejorar las condiciones de vida de la población en términos materiales y culturales. La acción sinérgica entre las diversas instituciones que intervienen o investigan sobre estas comunidades es un compromiso, ya que de ello depende la calidad del impacto en las propias comunidades. En este sentido, la descripción de las experiencias intergeneracionales de movilidad social de los hogares y su significación subjetiva, puede considerarse de interés tanto para las instituciones como para la comunidad misma. De esta manera se espera devolver a las comunidades lo que éstas le ofrezcan al equipo de investigación, como flujo de intercambio recíproco de conocimiento y desarrollo humano. Desde el punto de vista metodológico, el equipo espera realizar una evaluación de los distintos abordajes cuantitativos y cualitativos a escala microsocial, a fin de realizar propuestas válidas para nuevas investigaciones en ámbitos locales. This research proposes to approach the knowledge and understanding of the various mechanisms of social mobility in adjacent neighborhoods of Villa La Tela (Cordoba, Argentina). Although the target populations have different levels of life, this project does not intend to compare urban areas, but the identification of different patterns of social mobility nowadays. Indirect approach is also intended to outline the existing social stratification in Cordoba city. We plan to define a methodological approach based on triangulation of quantitative and qualitative methods, exploiting the strengths of each approach to make a multidisciplinary vision of the population living conditions. Project proposes phases consisting of three instances, that do not necessarily correspond with chronological time: 1) secondary data analysis (population censuses, surveys of government agencies and civilian organizations) and previous research results; 2) promotion of a recreation space in the community to identify the subjective perceptions of local actors in relation to living conditions and experience of social mobility; 3) finally there will be a phase of survey work and deep interviews from inputs produced in the two phases mentioned above. Households will be taken as socio-economic unit, also considered as social and physical space where family strategies of life are designed and implemented by its members. We considere this project can transfer the obtained results to the institutions involved in the concerned districts. This transfer is a specific outreach activity, since the interventions in place are aimed to improving the living conditions of population in material and cultural terms.

A nutrient balance model for typical Irish farming systems

The twin objectives of the work described were to construct nutrient balance models (NBM) for a range of Irish animal production systems and to evaluate their potential as a means of estimating the nutrient composition of farm wastes. The NBM has three components. The first is the intake of nutrients in the animal's diet. The second is retention or the nutrients the animal retains for the production of milk, meat or eggs. The third is the balance or the difference between the nutrient intake and retention. Data on the intake levels and their nutrient value for dairy cows, beef cattle, pigs and poultry systems were assembled. Literature searches and interviews with National experts were the primary sources of information. NBMs were then constructed for each production system. Summary tables of the nutrient values for the common diet constituents used in Irish animal production systems, the nutrient composition of the animal products and the NBMs (nutrient intake, retention and excretion) for a range of production systems were assembled. These represent the first comprehensive data set of this type for Irish animal production systems. There was generally good agreement between the derived NBMs values and those published in the literature. The NBMs were validated on a number of farms. Data on animal numbers, fertiliser use, concentrates inputs and production output were recorded on seven farms. Using the data a nutrient input/output balance was constructed for each farm. This was compared with the NBM estimate of the farm nutrient balance. The results showed good agreement between the measured balance and the NBM estimate particularly for the pig and poultry farms. However, the validation emphasised the inherent risks associated with NBMs. The average values used for feed intake and production parameters in the NEMs may result in the under or over estimate of actual nutrient balances on individual farms where these variables are substantially different. On the grassland farms there was a poor correlation between the input/output estimate and the NBM. This possibly results from the omission of the soil's contribution to the nutrient balance. However, the results indicate that the NBMs developed are a potentially useful tool for estimating nutrient balances. They also will serve to highlight the significant fraction of the nutrient inputs into farming systems that are retained on the farm. The potential of the NBM as a means of estimating the nutrient composition of farm wastes was evaluated on two farms. Feed intake and composition, animal production, slurry production was monitored during the indoor winter feeding period. Slurry samples were taken for analysis. The appropriates NBMs were used to estimate the nutrient balance for each farm. The nutrient content of the slurry produced was calculated. There was a good agreement between the NBM estimate and the measured values. This preliminary evaluation suggests that the NBM has a potential to provide the farmer with a simple means of estimating the nutrient value of his slurry.

Development of a new method for the characterisation of bioreactors concerning heat and mass transfer

Since the specific heat transfer coefficient (UA) and the volumetric mass transfer coefficient (kLa) play an important role for the design of biotechnological processes, different techniques were developed in the past for the determination of these parameters. However, these approaches often use imprecise dynamic methods for the description of stationary processes and are limited towards scale and geometry of the bioreactor. Therefore, the aim of this thesis was to develop a new method, which overcomes these restrictions. This new approach is based on a permanent production of heat and oxygen by the constant decomposition of hydrogen peroxide in continuous mode. Since the degradation of H2O2 at standard conditions only takes place by the support of a catalyst, different candidates were investigated for their potential (regarding safety issues and reaction kinetic). Manganese-(IV)-oxide was found to be suitable. To compensate the inactivation of MnO2, a continuous process with repeated feeds of fresh MnO2 was established. Subsequently, a scale-up was successfully carried out from 100 mL to a 5 litre glass bioreactor (UniVessel®)To show the applicability of this new method for the characterisation of bioreactors, it was compared with common approaches. With the newly established technique as well as with a conventional procedure, which is based on an electrical heat source, specific heat transfer coefficients were measured in the range of 17.1 – 24.8 W/K for power inputs of about 50 – 70 W/L. However, a first proof of concept regarding the mass transfer showed no constant kLa for different dilution rates up to 0.04 h-1.Based on this, consecutive studies concerning the mass transfer should be made with higher volume flows, due to more even inflow rates. In addition, further experiments are advisable, to analyse the heat transfer in single-use bioreactors and in larger common systems.

Increasing the efficiency of utilization of soil and fertilizer phosphorus in the subtropical and tropical agricultural systems C

As a rule, soils of the subtropical and tropical regions, in which rainfall is not limiting, are acidic, and low in phosphorus, and, to a less extent, in other macro and micronutrients as well, such a sulfur, boron and zinc. The establishment of a permanent agricultural prac. tice therefore, demands relatively high usage of liming and phosphatic fertilization, to begin with. Several approaches, not mutually exclusive, could be used in order to increase the efficiency of utilization of soil and fertilizer phosphorus so that, goal of diminishing costs of production is reached. The use of liming materials bringing up pH to 6.0-6.5 causes the conversion of iron and aluminum phosphates to more available calcium phosphates; on the other hand, by raising calcium saturation in the exchange complex, it improves the development and operation if the root system which allows c or a higher utilization of all soil nutrients, including phosphorus, and helps of stand water deficits which may occur. The role of mycorrhizal fungi should be considered as a way of increasing soil and fertilizer P utilization, as well as the limitations thereof. Screening of and breeding for varieties with higher efficiency of uptake and utilization of soil and fertilizer phosphorus leads to a reduction in cost of inputs and to higher benefit/cost ratios. Corrective fertilization using ground rock phosphate helps to saturate the fixation power of the soil thereby reducing, as a consequence, the need for phosphorus in the maintenance fertilization. Maintenance fertilization, in which soluble phos-phatic sources are used, could be improved by several means whose performance has been proved: limimg, granula tion, placement, use of magnesium salts. Last, cost of phosphate fertilization could be further reduced, without impairing yields, through impairing yields, through changes in technology designed to obtain products better adapted to local conditions and to the availability or raw materials and energy sources.

Aplicación del DEA en el análisis de beneficios en un sistema integrado verticalmente hacia adelante

En el presente trabajo se diseñan tres modelos DEA a partir de un sistema de producción cuyos componentes están colocados en un arreglo en serie que se integran verticalmente hacia adelante. El primer modelo busca optimizar los beneficios del sistema agregado, así como la mejora de los mismos en cada uno de los subsistemas. En el segundo de los modelos, además del objetivo anterior, se incluyen restricciones de transferencia de los recursos específicos asociados a cada subsistema, y en el tercer modelo se estima el intervalo de variación para los precios de transferencia de los inputs intermedios entre ambos subsistemas. Los modelos han sido programados y simulados en el software GAMS a partir de datos generados por una función de producción Cobb-Douglas para los inputs intermedios y los outputs finales.