Initial phase modelling in numerical explosion applied to process safety

The utilisation of computational fluid dynamics (CFD) in process safety has increased significantly in recent years. The modelling of accidental explosion via CFD has in many cases replaced the classical Multi Energy and Brake Strehlow methods. The benefits obtained with CFD modelling can be diminished if proper modelling of the initial phase of explosion is neglected. In the early stages of an explosion, the flame propagates in a quasi-laminar regime. Proper modelling of the initial laminar phase is a key aspect in order to predict the peak pressure and the time to peak pressure. The present work suggests a modelling approach for the initial laminar phase in explosion scenarios. Findings are compared with experimental data for two classical explosion test cases which resemble the common features in chemical process areas (confinement and congestion). A detailed analysis of the threshold for the transition from laminar to turbulent regime is also carried out. The modelling is implemented in a fully 3D Navier-Stokes compressible formulation. Combustion is treated using a laminar flamelet approach based on the Bray, Moss and Libby (BML) formulation. A novel modified porosity approach developed for the unstructured solver is also considered. Results agree satisfactorily with experiments and the modelling is found to be robust. © 2013 The Institution of Chemical Engineers.

Aerodynamic design of high end wall angle turbine stages- part II: Experimental verification

An experimental investigation of a turbine stage featuring very high end wall angles is presented. The initial turbine design did not achieve a satisfactory performance and the difference between the design predictions and the test results was traced to a large separated region on the rear suction-surface. To improve the agreement between computational fluid dynamics (CFD) and experiment, it was found necessary to modify the turbulence modeling employed. The modified CFD code was then used to redesign the vane, and the changes made are described. When tested, the performance of the redesigned vane was found to have much closer agreement with the predictions than the initial vane. Finally, the flowfield and performance of the redesigned stage are compared to a similar turbine, designed to perform the same duty, which lies in an annulus of moderate end wall angles. A reduction in stage efficiency of at least 2.4% was estimated for the very high end wall angle design. © 2014 by ASME.

Rearing of Procypris rabaudi during early life-history stages

The early life-history of Chinese rock carp Procypris rabaudi was investigated during a 56-day rearing period: 318 artificially propagated P. rabaudi larvae were reared throughout metamorphosis in a small-scale recirculation system (345 L water volume, 10 x 18 L rearing tanks, 150 L storage and filter compartment with bioballs, 20-30 larvae L-1) at the Institute of Hydrobiology, Wuhan, Hubei Province, China. The newly hatched larvae had an initial total length of 8.93 +/- 0.35 mm SD (n = 10) at 3 days post-hatch and reached an average total length of 33.29 mm (+/- 1.88 mm SD, n = 10) 56 days after hatching. Length increment averaged 0.45 mm day(-1), resulting in a mean growth of 24.4 mm within the 56-day period. High mortality rates of up to 92% derived from an introduced fungus infection and subsequent treatment stress with malachite green. Our results indicate that Chinese rock carp can be raised successfully from artificially fertilized eggs. We therefore assume this species to be a candidate for commercial aquaculture.

Tracing early stages of species differentiation: Ecological, morphological and genetic divergence of Galapagos sea lion populations

Background: Oceans are high gene flow environments that are traditionally believed to hamper the build-up of genetic divergence. Despite this, divergence appears to occur occasionally at surprisingly small scales. The Galápagos archipelago provides an ideal opportunity to examine the evolutionary processes of local divergence in an isolated marine environment. Galápagos sea lions (Zalophus wollebaeki) are top predators in this unique setting and have an essentially unlimited dispersal capacity across the entire species range. In theory, this should oppose any genetic differentiation.
Results: We find significant ecological, morphological and genetic divergence between the western colonies and colonies from the central region of the archipelago that are exposed to different ecological conditions. Stable isotope analyses indicate that western animals use different food sources than those from the central area. This is likely due to niche partitioning with the second Galápagos eared seal species, the Galápagos fur seal (Arctocephalus galapagoensis) that exclusively dwells in the west. Stable isotope patterns correlate with significant differences in foraging-related skull morphology. Analyses of mitochondrial sequences as well as microsatellites reveal signs of initial genetic differentiation.
Conclusion: Our results suggest a key role of intra- as well as inter-specific niche segregation in the evolution of genetic structure among populations of a highly mobile species under conditions of free movement. Given the monophyletic arrival of the sea lions on the archipelago, our study challenges the view that geographical barriers are strictly needed for the build-up of genetic divergence. The study further raises the interesting prospect that in social, colonially breeding mammals additional forces, such as social structure or feeding traditions, might bear on the genetic partitioning of populations.

Can the spread of non-native oysters (Crassostrea gigas) at the early stages of population expansion be managed?

The Pacific oyster (Crassostrea gigas) was introduced into Strangford Lough, Northern Ireland in the 1970s. It was assumed that local environmental conditions would not facilitate successful reproduction. However, in the 1990s there were reports of C. gigas outside licensed aquaculture sites and this investigation set out to ascertain the current distribution, years of likely recruitment and population structure of the species. C. gigas were found distributed widely throughout the northern basin during surveys; the frequency distribution suggesting C. gigas is not recruiting every year. Establishment of feral populations of C. gigas elsewhere have linked to habitat change. A pilot cull was initiated to assess the success rate of early intervention. This paper demonstrates the potential benefits of responding rapidly to initial reports of non-native species in a way that may curtail establishment and expansion. The method advocated in simple and can be recommended to the appropriate regulatory authorities.

Assessing initial embodied energy in building structures using LCA methodology

The considerable amount of energy consumed on Earth is a major cause for not achieving sustainable development. Buildings are responsible for the highest worldwide energy consumption, nearly 40%. Strong efforts have been made in what concerns the reduction of buildings operational energy (heating, hot water, ventilation, electricity), since operational energy is so far the highest energy component in a building life cycle. However, as operational energy is being reduced the embodied energy increases. One of the building elements responsible for higher embodied energy consumption is the building structural system. Therefore, the present work is going to study part of embodied energy (initial embodied energy) in building structures using a life cycle assessment methodology, in order to contribute for a greater understanding of embodied energy in buildings structural systems. Initial embodied energy is estimated for a building structure by varying the span and the structural material type. The results are analysed and compared for different stages, and some conclusions are drawn. At the end of this work it was possible to conclude that the building span does not have considerable influence in embodied energy consumption of building structures. However, the structural material type has influence in the overall energetic performance. In fact, with this research it was possible that building structure that requires more initial embodied energy is the steel structure; then the glued laminated timber structure; and finally the concrete structure.

Initial results from Phase 2 of the international urban energy balance model comparison

Urban land surface schemes have been developed to model the distinct features of the urban surface and the associated energy exchange processes. These models have been developed for a range of purposes and make different assumptions related to the inclusion and representation of the relevant processes. Here, the first results of Phase 2 from an international comparison project to evaluate 32 urban land surface schemes are presented. This is the first large-scale systematic evaluation of these models. In four stages, participants were given increasingly detailed information about an urban site for which urban fluxes were directly observed. At each stage, each group returned their models' calculated surface energy balance fluxes. Wide variations are evident in the performance of the models for individual fluxes. No individual model performs best for all fluxes. Providing additional information about the surface generally results in better performance. However, there is clear evidence that poor choice of parameter values can cause a large drop in performance for models that otherwise perform well. As many models do not perform well across all fluxes, there is need for caution in their application, and users should be aware of the implications for applications and decision making.

Effect of plant density and initial crown size on growth, development and yield in strawberry cultivars Elsanta and Bolero

The effects of density (plant spacing) and initial plant size on vegetative growth, flowering and fruiting were studied in the strawberry cultivars Elsanta and Bolero in their first and second years of cropping. The influence of these factors on light use and dry-matter partitioning was investigated. The size of planting material in 'Elsanta' and 'Bolero' slightly affected plant growth and yield, but this effect was not consistent and radiation use efficiency (RUE) and harvest index were unaltered. Plant spacing did not significantly affect the early stages of crop growth, but was important in determining growth and yield later in the season, this effect being more significant in the second year of cropping. Plant growth and yield per plant increased as plant spacing increased from 20 to 30 cm in both 'Elsanta' and 'Bolero', but the highest harvest index and yield per square metre were obtained at the closest spacing. Increased plant spacing also resulted in a greater leaf area and leaf area index. However, light was used less efficiently resulting in a lower RUE and lower harvest index (HI).

Effect of plant density and initial crown size on growth, development and yield in strawberry cultivars Elsanta and Bolero

The effects of density (plant spacing) and initial plant size on vegetative growth, flowering and fruiting were studied in the strawberry cultivars Elsanta and Bolero in their first and second years of cropping. The influence of these factors on light use and dry-matter partitioning was investigated. The size of planting material in 'Elsanta' and 'Bolero' slightly affected plant growth and yield, but this effect was not consistent and radiation use efficiency (RUE) and harvest index were unaltered. Plant spacing did not significantly affect the early stages of crop growth, but was important in determining growth and yield later in the season, this effect being more significant in the second year of cropping. Plant growth and yield per plant increased as plant spacing increased from 20 to 30 cm in both 'Elsanta' and 'Bolero', but the highest harvest index and yield per square metre were obtained at the closest spacing. Increased plant spacing also resulted in a greater leaf area and leaf area index. However, light was used less efficiently resulting in a lower RUE and lower harvest index (HI).

Transition of pupils from Key Stage 2 to 3 deemed gifted and talented in mathematics: an initial study

In this article Geoff Tennant and Dave Harries report on the early stages of a research project looking to examine the transition from Key Stage (KS) 2 to 3 of children deemed Gifted and Talented (G&T) in mathematics. An examination of relevant literature points towards variation in definition of key terms and underlying rationale for activities. Preliminary fieldwork points towards a lack of meaningful communication between schools, with primary school teachers in particular left to themselves to decide how to work with children deemed G&T. Some pointers for action are given, along with ideas for future research and a request for colleagues interested in working with us to get in touch.

Soil phosphorus dynamics and phytoavailability from sewage sludge at different stages in a treatment stream

The effect of different stages of sewage sludge treatment on phosphorus (P) dynamics in amended soils was determined using samples of undigested liquid (UL), anaerobically digested liquid (AD) and dewatered anaerobically digested (DC) sludge. Sludges were taken from three points in the same treatment stream and applied to a sandy loam soil in field-based mesocosms at 4, 8 and 16t ha−1 dry solids. Mesocosms were sown with perennial ryegrass (Lolium perenne cv. Melle), and the sward was harvested after 35 and 70 days to determine yield and foliar P concentration. Soils were also sampled during this period to measure P transformations and the activities of acid phosphomonoesterase and phosphodiesterase. Data show that the AD amended soils had the greatest plant-available and foliar P content up to the second harvest, but the UL amended soils had the greatest enzyme activity. Characterisation of control and 16t ha−1 soils and sludge using solution 31P nuclear magnetic resonance (NMR) spectroscopy after NaOH–EDTA extraction revealed that P was predominantly in the inorganic pool in all three sludge samples, with the highest proportion (of the total extracted P) as inorganic P in the anaerobically digested liquid sludge. After sludge incorporation, P was immobilised to organic species. The majority of organic P was in monoester-P forms, while the remainder of organic P (diester P and phosphonate P) was more susceptible to transformations through time and showed variation with sludge type. These results show that application of sewage sludge at rates as low as 4t ha−1 can have a significant nutritional benefit to ryegrass over an initial 35-day growth and subsequent 35-day re-growth periods. Differences in P transformation, and hence nutritional benefit, between sludge types were evident throughout the experiment. Thus, differences in sludge treatment process alter the edaphic mineralisation characteristics of biosolids derived from the same source material.

Ingestion rates of Artemia nauplii for different larval stages of Macrobrachium rosenbergii

The functional response between ingestion rate and food concentration was determined for each larval stage of Macrobrachium rosenbergii. Artemia franciscana nauplii were supplied at 2,4, 6, 8, 10 and 12 per milliliter. The nauplii were counted by sight using a Pasteur pipette and transferred to Petri dishes containing 40 ml of brackish water (12 parts per thousand) lying on the top of black plastic. One larva at each stage was individually placed into each Petri dish containing different food density. After 24 h, each larva was removed from the Petri dish and the leftover nauplii were counted. The amount consumed was determined by the difference between the initial and final number of nauplii. Ingestion rate (I) increased as food density (P) increased and was defined by the model I=I-m(1-e(-kP)). The results suggest four levels of ingestion during larval development. The first level includes stages II, III and IV, with average maximum consumption of about 40 nauplii/day; the second level includes stages V and VI, with consumption of approximately 55 nauplii/day; the third level includes stages VII and VIII, with consumption of 80-100 nauplii/day. The fourth level includes stages IX, X and XI, in which the high values for maximum ingestion (Im) exceed the load capacity of the medium. The low values for constant k (that may correspond to the adaptability of the food to prey characteristics, such as, size, mobility, etc.) obtained for stages IX, X and XI indicated that Artemia is not an adequate prey and there is necessity of a supplementary diet. The best relationship between predator and prey seemed to occur during stage IV Results obtained in the present work may subsidize future researches and serve as a guideline for practical considerations of feeding rates. (C) 2003 Elsevier B.V. B.V. All rights reserved.

Nodule ultrastructure and initial growth of Anadenanthera peregrina (L.) Speg. var. falcata (Benth.) Altschul plants infected with rhizobia

The anatomy and ultrastructure of root nodules of Anadenanthera peregrina var. falcata (Leguminosae-Mimosoideae) were analysed, as was plant growth. To ensure that nodules developed, seedlings were inoculated with a mixture of six strains of rhizobia. Nodules were produced that differed in appearance-and probably also effectiveness-but their structure was similar and they showed characteristics typical of indeterminate nodules, such as persistent meristematic tissue and a gradient of cells at different stages of development. Many starch grains were present in inner cortex cells and interstitial cells of infected tissue. Infected cells were densely packed with bacteroids, which contained many poly-beta-hydroxybutyrate granules. The high incidence of these granules, together with high levels of starch accumulation in interstitial cells, suggested low N-2-fixation efficiency of the rhizobia isolates used for inoculation. In the symbiosomes of early-senescent infected cells, reticulum-like structures, small vesicles and a fibrillar material were observed; these may be related to bacteroid degradation. In the cytoplasm of late-senescent infected cells, many vesicles and membrane-like structures were observed, probably associated with membrane degradation of bacteroids and peribacteroids. The total biomass of plants inoculated with rhizobia was low and their xylopodia and shoots had low levels of N compared with non-inoculated plants fertilized with ammonium nitrate. However, inoculated plants did not show N-deficiency symptoms and grew better than non-inoculated plants without N fertilization. These growth results, together with ultrastructural observations of nodules, suggest that nitrogen fixation of rhizobia isolates associated with Anadenanthera peregrina var. falcata roots is poor. (C) 2002 Annals of Botany Company.

Mini-implant and Nance button for initial retraction of maxillary canines: a prospective study in cast models

OBJETIVO: a ancoragem óssea é fundamental para o sucesso do tratamento de algumas más oclusões, pois permite a aplicação de forças contínuas, diminui o tempo de tratamento e independe da colaboração do paciente. MÉTODOS: o propósito desse trabalho foi comparar, por meio de modelos dentários, a perda de ancoragem após a retração inicial de caninos superiores entre dois grupos. O grupo A utilizou o mini-implante enquanto o grupo B utilizou o Botão de Nance. Para todos os pacientes foram realizados dois modelos (M1 e M2). Os primeiros modelos foram realizados ao início (M1), e os outros ao final da retração inicial de canino (M2). RESULTADOS: todas as medidas foram tabuladas e submetidas à análise estatística. Para verificar o erro sistemático intraexaminador foi utilizado o teste t pareado. Na determinação do erro casual utilizou-se o cálculo de erro proposto por Dahlberg. Para comparação entre as fases Início e Após, foi utilizado o teste t pareado. Para a comparação entre os grupos de mini-implante e Botão de Nance, foi utilizado o teste t de Student para medidas independentes. em todos os testes foi adotado nível de significância de 5% (p<0,05). CONCLUSÃO: ao se medir e comparar em modelos dentários a perda de ancoragem dos molares após a retração inicial de canino utilizando-se dois sistemas de ancoragem distintos (Mini-implante e Botão de Nance), pôde-se observar a inexistência de diferença estatisticamente significativa entre os dois grupos.

Limit between stages I and II of a seed imbibition curve

O conhecimento das fases de absorção de água das diferentes espécies é importante em pesquisas objetivando melhorar a qualidade das sementes, utilizando tratamentos como condicionamento osmótico, pré-hidratação e uso de bioreguladores. O objetivo do presente trabalho foi estabelecer uma metodologia para determinar o limite entre a primeira e a segunda fase do processo, considerando o modelo W = f(t) - (a - w0)exp(-kt), utilizando testes estatísticos. O limite entre as duas primeiras fases do processo de absorção de água pelas sementes, foi determinado utilizando-se a distribuição assintótica de uma função de estimadores. O ponto a partir do qual esta diferença (W*) deixa de ser significativa foi determinado utilizando-se o teste estatístico T de Student. Para os dados utilizados como exemplo, tem-se o modelo ou =(0,434 + 0,00162 t) - (0,434 - w o)exp(-0,121 t), com r² = 0,98 e W* = (0,434 - w o) exp(-0,121 t). O valor de t encontrado (27,2 horas) é menor do que o valor determinado, considerando-se como critério para mudança de fase a diferença de 1% entre a assíntota e o valor estimado pelo modelo ajustado. Essa diferença de duas horas corresponde a 0,28% de água absorvida.