863 resultados para Hardwood plantation
Resumo:
This study aimed to evaluate different crops and plant species planted after soybeans for one year, in terms of their potential to inhibit the occurrence of weed species. The following crops that were planted as second crop after soybeans were evaluated: (1) corn (Zea mays) planted at spacing of 90 cm between rows, intercropped with Brachiaria ruziziensis in the inter-rows; (2) sunflower (Helianthus annuus); (3) crambe (Crambe abyssinica); (4) radish (Raphanus sativus); (5) rapeseed (Brassica napus); and (6) winter fallow - no plantation after soybeans. Phytosociological characterization of weed species was carried out at the pre-planting of soybeans in the following cropping season. Estimations of relative abundance, relative frequence, relative dominance and Importance Value Index were made for each species present. Areas were also intra-characterized by the diversity coefficients of Simpson and modified Shannon-Weiner, and areas were compared using the Jaccard similarity coefficient for presence-only, by multivariate cluster analysis. In the short‑term (a single cropping season), cultivation of winter crops do contribute for lower occurrence of weed species at the pre-planting of soybeans on the subsequent cropping season. The suppressive effects depend both on the species grown in the winter and in the amount of straw left on the soil by these winter crops. Radish was more efficient in inhibiting the occurrence of weed species and rapeseed showed composition of infestation similar to that observed at the area under fallow.
Resumo:
This study aimed to evaluate the level of infestation by weed species in a consolidated Jatropha plantation, as a function of the plant species grown in interrows. The experiment was installed in 2006 at the district of Itahum, city of Dourados, state of Mato Grosso do Sul, Brazil, made possible through a partnership between Embrapa Western Agriculture and Paraiso Farm. Treatments consisted of (1) Jatropha in monocrop, with no plant at the interrrows; or the following plants cultivaded at the interrows of Jatropha: (2) Stylosanthes spp.; (3) Brachiaria ruziziensis; (4) Brachiaria ruziziensis + Stylosanthess pp.; (5) Brachiaria humidicola; (6) Panicum maximum cv. massai; (7) Cajanus cajan cv. anão; (8) Crotalaria spectabilis; (9) Crop rotation system 1 - (maize second crop -Crambe abyssinica - soybean - peanut); and (10) Crop rotation system 2 - (cowpea - radish - maize - cowpea) conducted for two years. Phytosociological characterization of weed species was accomplished in 2011 based on the Ecological Approach. Estimations of relative abundance, frequency, dominance and Importance Value Index were obtained. Areas were also characterized by the diversity coefficients of Simpson and modified Shannon-Weiner, and then grouped by cluster analysis. Areas with low soil coverage resulted in higher infestation levels; crop rotation in the interrows of Jatropha produced a significant reduction in weed infestation, but the lowest infestation levels were observed when grasses were grown intercropped with Jatropha. Lower diversity coefficients were associated with occurrence of the most troublesome weed species. In the first years after planting Jatropha, species of Brachiaria or a crop rotation involving species with high mulching ability and whose biomass exhibit a high C:N ratio, should be established in the interrows to avoid problems with weeds infestation.
Resumo:
We aimed with this study to compare weed infestation in coffee under two different cropping managements: conventional coffee grown alone, or intercropped with banana plantation in a year-round basis (late spring, late summer, late fall and late winter). The experiment was installed in 2009 under field conditions at the Escola Municipal Rural Benedita Figueiró de Oliveira, in the city of Ivinhema in the state of Mato Grosso do Sul, Brazil. Assessments of weed occurrence were made three years after employment, on both cropping systems, and density, frequency, dominance and the importance value for each plant species in each system and season were quantified. Plant diversity within each system was estimated by Simpson and Shannon-Weiner indexes. Similarity between cropping systems were also assessed by the binary asymmetric similarity coefficient of Jaccard. Absolute infestation and spontaneous species differed between the two cropping systems in all seasons. Overall species diversity is higher in the monocrop compared with the intercrop, and it is associated in this study with the higher incidence of troublesome species. Areas were similar in terms of weed composition only in the Fall. Shading provided by the banana trees shows to be an efficient culture management aiming to suppress weeds in agro-ecological planting systems.
Resumo:
Ionic liquids, ILs, have recently been studied with accelerating interest to be used for a deconstruction/fractionation, dissolution or pretreatment processing method of lignocellulosic biomass. ILs are usually utilized combined with heat. Regarding lignocellulosic recalcitrance toward fractionation and IL utilization, most of the studies concern IL utilization in the biomass fermentation process prior to the enzymatic hydrolysis step. It has been demonstrated that IL-pretreatment gives more efficient hydrolysis of the biomass polysaccharides than enzymatic hydrolysis alone. Both cellulose (especially cellulose) and lignin are very resistant towards fractionation and even dissolution methods. As an example, it can be mentioned that softwood, hardwood and grass-type plant species have different types of lignin structures leading to the fact that softwood lignin (guaiacyl lignin dominates) is the most difficult to solubilize or chemically disrupt. In addition to the known conventional biomass processing methods, several ILs have also been found to efficiently dissolve either cellulose and/or wood samples – different ILs are suitable for different purposes. An IL treatment of wood usually results in non-fibrous pulp, where lignin is not efficiently separated and wood components are selectively precipitated, as cellulose is not soluble or degradable in ionic liquids under mild conditions. Nevertheless, new ILs capable of rather good fractionation performance have recently emerged. The capability of the IL to dissolve or deconstruct wood or cellulose depends on several factors, (e.g. sample origin, the particle size of the biomass, mechanical treatments as pulverization, initial biomassto-IL ratio, water content of the biomass, possible impurities of IL, reaction conditions, temperature etc). The aim of this study was to obtain (fermentable) saccharides and other valuable chemicals from wood by a combined heat and IL-treatment. Thermal treatments alone contribute to the degradation of polysaccharides (e.g. 150 °C alone is said to cause the degradation of polysaccharides), thus temperatures below that should be used, if the research interest lies on the IL effectiveness. On the other hand, the efficiency of the IL-treatment can also be enhanced to combine other treatment methods, (e.g. microwave heating). The samples of spruce, pine and birch sawdust were treated with either 1-Ethyl-3-methylimidazolium chloride, Emim Cl, or 1-Ethyl-3-methylimidazolium acetate, Emim Ac, (or with ionized water for comparison) at various temperatures (where focus was between 80 and 120 °C). The samples were withdrawn at fixed time intervals (the main interest treatment time area lied between 0 and 100 hours). Double experiments were executed. The selected mono- and disaccharides, as well as their known degradation products, 5-hydroxymethylfurfural, 5-HMF, and furfural were analyzed with capillary electrophoresis, CE, and high-performance liquid chromatography, HPLC. Initially, even GC and GC-MS were utilized. Galactose, glucose, mannose and xylose were the main monosaccharides that were present in the wood samples exposed to ILs at elevated temperatures; in addition, furfural and 5-HMF were detected; moreover, the quantitative amount of the two latter ones were naturally increasing in line with the heating time or the IL:wood ratio.
Resumo:
Xylanase activity was isolated from crude extracts of Trichoderma harzianum strains C and 4 grown at 28oC in a solid medium containing wheat bran as the carbon source. Enzyme activity was demonstrable in the permeate after ultrafiltration of the crude extracts using an Amicon system. The hydrolysis patterns of different xylans and paper pulps by xylanase activity ranged from xylose, xylobiose and xylotriose to higher xylooligosaccharides. A purified ß-xylosidase from the Trichoderma harzianum strain released xylose, xylobiose and xylotriose from seaweed, deacetylated, oat spelt and birchwood xylans. The purified enzyme was not active against acetylated xylan and catalyzed the hydrolysis of xylooligosaccharides, including xylotriose, xylotetraose and xylopentaose. However, the enzyme was not able to degrade xylohexaose. Xylanase pretreatment was effective for hardwood kraft pulp bleaching. Hardwood kraft pulp bleached in the XEOP sequence had its kappa number reduced from 13.2 to 8.9 and a viscosity of 20.45 cp. The efficiency of delignification was 33%.
Resumo:
The pulp and paper industry is currently facing broad structural changes due to global shifts in demand and supply. These changes have significant impacts on national economies worldwide. In this paper, we describe the recent trends in the pulp and recovered paper (RP) production, and estimate augmented gravity models of bilateral trade for chemical pulp and RP exports with panel data. According to our results, there is some variation in the effects of the traditional gravity-model variables between pulp grades and RP. The results imply also that, in comparison to export supply, import demand plays a larger role in determining the volume of exports. Finally, it is evident that Asia, particularly China, is the most important driver of chemical pulp and RP trade: China is hungry for fiber, and must import to satisfy its growing needs. Moreover, the speed of China’s growth in chemical pulp and RP imports has been driving the increased significance of planted forests in the exports of hardwood pulp (BHKP) as well.
Resumo:
The application of pulp and paper mill (PPM) sludge in agriculture and forestry has been acknowledged as soil amendments and a plant nutrient source. The main objectives of this study were to evaluate the total cost of the use of recycled nutrients from PPM sludge in fast growing pulpwood production, and the financial profitability of fast growing pulpwood production with the use of these recycled nutrients. The investment and production costs of fast growing pulpwood plantation were directly acquired from a previous research, while the other data was compiled through different studies. The total cost of the use of PPM sludge was evaluated based on assumed factors. Discounted cash flow method was used to evaluate the financial profitability, using NPV and IRR as indicators. The results of estimated sludge nutrient contents were 16.2 g N, 2.9 g P, and 2.4 g K kg-1 of dry sludge. The sludge application rate was estimated at 1.36 Mg/ha in the first year. The total cost of the use of PPM sludge involved transport and spreading cost of US$49.15/dry ton. The fertilization cost applied in the financial model was designed in 3 different options and their results were as follows: option (1) was taken directly from the reference research (US$97/ha); option (2) was the use of sludge alone (US$66.75/ha); and option (3) was the use of sludge and TSP fertilizer (US$83.80/ha). The average NPV without discounting was US$248,180 while the IRRs ranged between approximately 3-4% with an average of 3.63%. Although option (2) and (3) contributed to higher IRRs compared to option (1), this increase was still not significant as the IRR was not sensitive to the total fertilization cost. The advantages are that this practice can be performed at a lower cost and the application rate can be still increased if necessary. It is better for forest plantations compared to agriculture and consequently supports reforestation program. In addition, it can be similarly applied in wood biomass production. A disadvantage is that the IRRs were not very favorable compared to the criterion of 11%. The sludge high in C:N ratio can cause nitrogen immobilization, and regulatory concerns may restrict and complicate the use of sludge landspreading and contribute to additional costs and processes.
Resumo:
There are many opportunities to utilise coconut in Nzema to support farmers. Coconut oil that is mainly used for food preparation in Nzema can be utilized as fuel to support overcoming of the energy crisis in the Ghana. Coconut oil in Nzema is not used in both transportation and electricity generation. A few of the waste husk and shell are mainly used as fuel in homes for heating but greater amount is left to rot or burn the coconut plantation. In addition, some portion of the granulated coconut kernel is sometime used as feed for piggery feed and the rest of the granulated kernel are left as waste on the oil processing site. In this thesis, the author identified alternative utilization of cocoanut, for instance the use of coconut husk and shell for charcoal production, and the use of coconut trunks as construction materials. It is envisaged that exploring these alternatives will not only reduce carbon emission in the country but will also contribute significantly to the sustainability of the local agro-industry.
Resumo:
The decay of seeds is irreversible and at best can only be delayed by applying techniques that reduce the velocity of the metabolic reactions involved. There is little information on the biochemistry of tropical forest tree seeds related to their storability. It was investigated the influence of the composition of lipids and soluble sugars of two storage compartments, the cotyledons and the embryonic axis, of Melanoxylon brauna Schot. (Leguminosae- Caesalpinioideae), a hardwood known as black brauna, seeds stored at 20 ºC for 0, 3, 6, 9 and 12 months (natural ageing) and for 0, 24, 48, 72 and 96 hours at 40 ºC (accelerated ageing). The levels of fatty acids and monosaccharides varied differentially in each of the embryo storage compartments. Changes in oligosaccharide levels were similar for both types of ageing, diminishing in both compartments. Ageing can be attributed to the significant decrease of oligosaccharides and the increase of glucose in both types of ageing and both embryo compartments.
Resumo:
F.R. [Francis Ramsey] Lalor (1856-1929) was born in St. Catharines, Ont. but lived most of his life in Dunnville, Haldimand County, Ont. He was a merchant and manufacturer. In 1903 he and a few partners founded the Monarch Knitting Co. Lalor was also an exporter of hardwood ashes used for agricultural purposes as fertilizer. Lalor was active in politics, he was a Conservative and the member of parliament for Haldimand, having been elected in the 1904, 1908, 1911 and 1917 elections. William Jaques lived in Simcoe, Norfolk County, Ontario. He was a junk dealer by profession.
Resumo:
Dans la dernière décennie, plusieurs hectares de terre agricole ont été convertis à la culture intensive sur courtes rotations (CICR) de saules dans le sud du Québec (Canada). Peu d’études ont été réalisées afin de déterminer comment se comporte la dynamique du carbone organique (Corg) dans le sol suivant cette conversion. Nous avons donc comparé la quantité du Corg et de deux pools labiles de carbone (carbone extractible à l’eau chaude et les sucres aminés) entre des CICR en phase initiale d’établissement (1-2 ans) et des parcelles appariées représentant le système de culture qui prévalait avant la transformation en culture de saules (culture fourragère) et d’autres cultures d’intérêt. La même chose a été faite pour une CICR en exploitation (depuis 9 ans) à un autre site. La quantité de Corg du sol n’était pas différente entre les CICR et les parcelles sous culture fourragère. Une plus haute concentration de sucres aminés dans le Corg total des CICR en établissement, par rapport aux autres parcelles sur le même site, permet de soupçonner que les perturbations liées à l’établissement ne mènent pas à une minéralisation accrue du Corg à court terme. La proportion de sucres aminés fongiques, qui diminue théoriquement lors de perturbations, était aussi plus élevée sous la plus jeune culture. Sous la CICR de neuf ans, le Corg était redistribué dans le profil vertical et les pools labiles étaient de plus petite taille (à une profondeur de 20-40 cm) comparativement à une parcelle témoin. La conversion d’une culture fourragère en plantation de saules en CICR n’a pas mené à la formation d’un puits de carbone. L’étude laisse entrevoir qu’un tel puits pourrait être créé si la conversion se faisait à partir d’un aménagement impliquant la culture en rotation de plantes annuelles et des labours.
Resumo:
Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal
Resumo:
Le but de cette étude est de comprendre l’effet d’une irrigation par les eaux usées et /ou de la fertilisation par les engrais chimiques sur la productivité aérienne et souterraine d’une plantation de saule Salix miyabeana SX67 en CICR dans un contexte de filtre végétal. Nous avons d’une part évalué l’impact de diverses doses d’eau usées et/ou de la fertilisation minérale sur les rendements en biomasse ligneuse d’une culture de saules au cours d’un cycle de croissance de deux ans. D’autre part et pour la même période nous avons comparé le développement racinaire (biomasse, morphologie et distribution dans le sol) suite aux divers traitements. Les résultats ont montré qu’au terme de deux ans de croissance, les traitements par les eaux usées aussi bien que celle par les engrais a permis l’augmentation des rendements de la biomasse aérienne de notre culture de saules avec un effet plus prononcé suite au traitements des eaux usées qu’à celui du fertilisant chimique. Nous avons mesuré des productivités en biomasse aussi élevées que 39,4 Mg ha-1 et 54,7 Mg ha-1 et ce pour les parcelles qui ont reçu la plus grande quantité d'eaux usées, respectivement pour les saules non fertilisé et fertilisé (D3-NF et D3-F). La majeure partie du système racinaire était en superficie avec 92-96% des racines (racine fine et racine grosse) concentrées dans les premiers 40 cm de sol et nous avons trouvé que la biomasse des racines fines était comprise entre 1,01 et 1,99 Mg ha-1. Généralement la fertilisation chimique n’a pas eu d’effet sur les rendements en biomasse des racines totales et/ou fines. Bien que l’irrigation par les eaux usées ait entraîné une réduction statistiquement significative de la biomasse racinaire, néanmoins cette réduction n'était pas linéaire (avec une réduction de la biomasse de D0 à D1, une augmentation de D1 à D2 pour réduire de nouveau de D2 à D3). Cette tendance porte à penser qu'au-delà d'une certaine quantité d'eau et de nutriments (suite à l’irrigation par les eaux usées), le développement du système racinaire des saules est affecté négativement, et bien que la biomasse aérienne soit restée élevée sous le traitement D3, nous pensons que le développement de la plante a été quelque peu déséquilibré. Aucun changement significatif n'a été constaté dans les traits morphologiques liés à l'irrigation par les eaux usées.
Resumo:
Mon mémoire de maîtrise a été réalisé dans le cadre du projet Génorem (www.genorem.ca), un projet multidisciplinaire qui réunit différents chercheurs de l'Université de Montréal et de l'Université McGill dans le but d'améliorer les techniques utilisées en bioremédiation. Dans le cadre de l'étude, des saules à croissance rapide (Salix sp.) ont été utilisés comme plantes modèles dans l'étude. Ainsi, 11 cultivars de saule ont été suivis afin de déterminer leur potentiel à produire un bon rendement de biomasse, à tolérer des conditions de stress sévère causé par la présence de HAPs (hydrocarbures aromatiques polycycliques) , BPCs (biphényles polychlorés) et d'hydrocarbures pétroliers C10-C50. L'expérimentation consistait en une plantation de saule à forte densité qui a été mise en place en 2011 sur le site d'une ancienne industrie de pétrochimie à Varennes, dans le sud du Québec. Les boutures des génotypes sélectionnés ont été plantées sur une superficie d'environ 5000 m2. Les plantes ont été suivies pendant les deux saisons de croissance suivant le recépage et une série de paramètres de croissance et de mesures physiologiques ont été récoltés (surface foliaire, taux de chlorophylle, conductance stomatique et statut nutritionnel) dans le but d'évaluer et de comparer les performances de chaque génotype sur un sol pollué. Les analyses statistiques ont démontré que le cultivar S. miyabeana (SX61) était le meilleur producteur de biomasse sur le site contaminé, tandis que S. nigra (S05) et S. acutifolia (S54) présentaient la meilleure capacité photosynthétique. S. dasyclados (SV1), S. purpurea (‘Fish Creek’) et S. caprea (S365) ont semblé particulièrement affectés par la présence de contaminants. La capacité d'établissement et la croissance de S. nigra (S05), S. eriocephala (S25) and S. purpurea x S. miyabeana (‘Millbrook’) indiquent une tolérance globale supérieure à la pollution . Cette analyse comparative des différentes réponses physiologiques des saules cultivés sur un sol contaminé pourra guider le processus de sélection de plantes et les techniques de bioremédiation dans les futurs projets de phytoremédiation.
Resumo:
Le cycle du carbone (C) est, depuis la révolution industrielle, déstabilisé par l’introduction dans l’atmosphère de C autrefois fossilisé. Certaines mesures de mitigation prometteuses impliquent la séquestration accrue du CO2 atmosphérique dans les sols via le développement du réseau racinaire des arbres. Ce projet de recherche visait à : 1) quantifier la biomasse racinaire ligneuse produite annuellement par unité de surface par le Salix miyabeana cultivé en régie intensive à courtes rotations, 2) doser la concentration en C et en N des racines de saule en fonction de leur profondeur et de leur diamètre et 3) déterminer l’influence des propriétés pédoclimatiques du milieu sur la séquestration du carbone organique (Corg) par les racines. Pour y arriver, six souches de saules ont été excavées à partir de huit sites (n=48) et neuf carottes de recolonisation ont été implantées à cinq sites (n=45) pour évaluer la productivité racinaire fine. Les échantillons séchés ont été pesés pour quantifier la biomasse racinaire produite, et ont été analysés pour le C et le N. La productivité en biomasse racinaire ligneuse du saule en plantation pour tout le réseau d'échantillonnage varie de 0,7 – 1,8 Mg/ha/an. La proportion de C dans la biomasse racinaire s’étend de 31,3% à 50,4% et sa variance dans les tissus est expliquée par le diamètre racinaire et par les conditions environnementales des sites de provenance. Les conditions climatiques constituent la principale influence sur la production de biomasse racinaire. La variance de la biomasse racinaire est significativement contrôlée (p :0,004) par la quantité de précipitation de l’été et de l’année qui contrôlent ensemble 83,4 % du r2 ajusté. La précipitation de l’été est inversement liée à la productivité racinaire puisque les protéines expansines des racines sont stimulées par les carences hydriques du sol. La production de racines fines des plantations (1,2 à 2,4 Mg/ha/an) est, elle, plus fortement contrôlée par les conditions pédologiques du site qui expliquent 36,5% de la variance de productivité des racines fines contre 37,5% de la variance expliquée par les facteurs pédoclimatiques. Le P et le N du sol ont des rôles prépondérants sur la production de racines fines. Une disponibilité en P accrue dans le sol stimule la biomasse racinaire fine alors qu’une quantité supérieure de N dans le sol limite la croissance racinaire tout en favorisant la croissance des parties aériennes de la plante. Ce projet a permis d’améliorer notre compréhension des conditions pédologiques et climatiques qui engendrent, au Québec méridional, une productivité et une séquestration en Corg accrue dans le réseau racinaire du saule.