Influence of constraining and confinement in the molecular mobility of low molecular weight materials

Dissertation presented to obtain a Ph.D. Degree in Chemical Physics

Caracterização física e química de fíleres para fabrico de misturas betuminosas

Mestrado em Engenharia Geotécnica e Geoambiente

Alterations in lipid transfer to High-Density Lipoprotein (HDL) and activity of paraoxonase-1 in HIV+ patients

HIV+ patients often develop alterations of the plasma lipids that may implicate in development of premature coronary artery disease. High-density lipoprotein (HDL) has an important role in preventing atherogenesis and the aim of this study was to investigate aspects of HDL function in HIV+ patients. HIV+ patients (n = 48) and healthy control subjects (n = 45) of both sexes with similar age were studied. Twenty-five were not being treated with antiretroviral agents, 13 were under reverse transcriptase inhibitor nucleosidic and non-nucleosidic (NRTI+NNRTI) and 10 were under NRTI + protease inhibitors (NRTI+PI) treatment. Paraoxonase 1 (PON1) activity and the transfer of free and esterified cholesterol, tryglicerides and phospholipids from a lipidic nanoemulsion to HDL were analyzed. In comparison with healthy controls, HIV+ patients presented low PON-1 activity and diminished transfer of free cholesterol and tryglicerides. In contrast, phospholipid transfer was increased in those patients, whereas the transfer of cholesteryl esters was unchanged. NRTI+NNRTI increases the transfer of cholesteryl esters and triglycerides but in NRTI+PI there was no difference in respect to non-treated HIV+ patients. HDL from HIV+ patients has smaller antioxidant properties, as shown by lower PON-1 activity, and the transfer of lipids to this lipoprotein fraction is also altered, suggesting that HDL function is defective in those patients.

The compatibility of earth-based repair mortars with rammed earth substrates

3rd Historic Mortars Conference, 11-14 September 2013, Glasgow, Scotland

Earth-based repair mortars: experimental analysis with different binders and natural fibers

RESTAPIA 2012 - Int. Conf. on Rammed Earth Conservation, Valencia, 21-23 June 2012

Performance assessment of waste fibre-reinforced mortar

Materials Science Forum Vols. 730-732 (2013) pp 617-622

Comparative evaluation of aerial lime mortars for architectural conservation

Journal of Cultural Heritage 9 (2008) 338-346

Resistance to salts of lime and pozzolan mortars

International RILEM Workshop on Repairs Mortars for Historic Masonry, Technical University of Delft, 2009

The effect of hydraulic components on lime mortars

XXX IAHS World Congress on Housing - Housing Construction: An Interdisciplinary Task, September 9-13, 2002, Coimbra, Portugal

On the physical-chemical properties of ceramide C16

Dissertation presented to obtain the Ph.D degree in Chemistry.

Contribuição para o estudo da anexina V na apoptose celular em concentrados de eritrócitos

A hemoterapia moderna baseia-se na utilização correcta dos diversos componentes sanguíneos, associados a um maior controle de qualidade do sangue, o que a torna mais segura e, actualmente, muitos doentes sao beneficiados pois, a transfusão de componentes sanguineos, em situaçoes várias, está na linha da frente na manutenção da vida e em casos extremos, o último recurso que salva vidas. A qualidade e a segurança nas transfusões de sangue são grandes preocupações da área médica, autoridades de saúde e doente1. O sangue obtido pelos Centros de Sangue provem de dadores voluntários, dotados de uma enorme sensibilidade social, que periodicamente assumem uma postura benevola e altruista e consequentemente mantêm os bancos de sangue providos de um produto imprescindivel no tratamento de diversas patologias. O produto final disponível – concentrado de eritrócitos (CE´s), plasma e concentrado plaquetário – tem de assumir um carácter seguro e viável de modo a que os riscos para o doente sejam diminutos2. O controlo de qualidade aplicado a todo o sangue doado realiza provas de conformidade nas unidades com especificações previamente definidas, sendo a hémolise um dos parâmetros importantes na avaliação da qualidade dos concentrados de eritrócitos, pois, pode ocasionar implicações clinicas para o receptor. Para além disso a avaliação da concentração de hemoglobina (Hg) no sangue doado mostra-se um controlo imprescindivel que salvaguarda a qualidade e segurança do componente a transfundir3;4.Até se obter um CE há todo um processo moroso e de responsabilidade vital. Todo o sangue obtido passa por várias etapas fundamentais até à obtenção do componente pretendido (analise, produção e armazenamento). Os CE’s obtidos quando armazenados, num ambiente de refrigeração, têm uma vida útil de 42 dias. Após este período, o sangue deve ser inutilizado por se verificar alterações bioquímicas, biomecânicas, e imunológicas nos CE’s e por consequência a sua instabilidade vital no que ao tratamento de patologias, para as quais este componente está indicado, diz respeito5. Foi realizado um estudo experimental com o objetivo de avaliar a contribuição da Anexina V na apoptose celular nos concentrados de eritrócitos, constatando a degradação dos mesmos ao longo de todo o período de armazenamento e validar o paradigma que a ciência preconiza: “Os CE’s após os 42 dias armazenados, em condições específicas (2 a 6º centígrados), são inviaveis para transfundir”6;7. A avaliação dos níveis de apoptose por citometria de fluxo é geralmente realizada por métodos que utilizam Anexina V como marcador vital, que se associa aos resíduos de fosfatidilserina, externalizados no início do processo apoptótico. A Anexina V é uma proteína humana endógena dependente do ião Ca+2, amplamente distribuída intracelularmente em altas concentrações na placenta e em concentrações mais baixas nos eritrócitos, plaquetas e monócitos. Apresenta como principal característica a capacidade de se ligar à fosfatidilserina, um fosfolipído presente na camada interna da bicamada lipídica, que durante a apoptose celular é translocada para a camada externa da membrana celular. A determinação da Anexina V é normalmente utilizada para verificar se as células são viáveis, apoptóticas ou necróticas por meio de diferenças na integridade da membrana plasmática. Assim, ao conjugar a Anexina V ao FITC (Isotiocianato de fluoresceína) é possível identificar e quantificar as células apoptóticas por citometria de fluxo7. Numa amostra de 15 CE’s, a qual foi induzida a hemólise, verificou-se, por citometria de fluxo, que a viabilidade deste componente se desvanesce ao longo do tempo, confirmando assim que o tratamento, manuseamento e armazenamento do sangue compromete a vitalidade terapeutica deste insubstituivel produto vital.

Characterization of molecular damage induced by UV photons and carbon ions on biomimetic heterostructures

The study of the effect of radiation on living tissues is a rather complex task to address mainly because they are made of a set of complex functional biological structures and interfaces. Particularly if one is looking for where damage is taking place in a first stage and what are the underlying reaction mechanisms. In this work a new approach is addressed to study the effect of radiation by making use of well identified molecular hetero-structures samples which mimic the biological environment. These were obtained by assembling onto a solid support deoxyribonucleic acid (DNA) and phospholipids together with a soft water-containing polyelectrolyte precursor in layered structures and by producing lipid layers at liquid/air interface with DNA as subphase. The effects of both ultraviolet (UV) radiation and carbon ions beams were systematically investigated in these heterostructures, namely damage on DNA by means vacuum ultraviolet (VUV), infrared (IR), X-Ray Photoelectron (XPS) and impedance spectroscopy. Experimental results revealed that UV affects furanose, PO2-, thymines, cytosines and adenines groups. The XPS spectrometry carried out on the samples allowed validate the VUV and IR results and to conclude that ionized phosphate groups, surrounded by the sodium counterions, congregate hydration water molecules which play a role of UV protection. The ac electrical conductivity measurements revealed that the DNA electrical conduction is arising from DNA chain electron hopping between base-pairs and phosphate groups, with the hopping distance equal to the distance between DNA base-pairs and is strongly dependent on UV radiation exposure, due loss of phosphate groups. Characterization of DNA samples exposed to a 4 keV C3+ ions beam revealed also carbon-oxygen bonds break, phosphate groups damage and formation of new species. Results from radiation induced damage carried out on biomimetic heterostructures having different compositions revealed that damage is dependent on sample composition, with respect to functional targeted groups and extent of damage. Conversely, LbL films of 1,2-dipalmitoyl-sn-Glycero-3-[Phospho-rac-(1-glycerol)] (Sodium Salt) (DPPG) liposomes, alternated with poly(allylamine hydrochloride) (PAH) revealed to be unaffected, even by prolonged UV irradiation exposure, in the absence of water molecules. However, DPPG molecules were damaged by the UV radiation in presence of water with cleavage of C-O, C=O and –PO2- bonds. Finally, the study of DNA interaction with the ionic lipids at liquid/air interfaces revealed that electrical charge of the lipid influences the interaction of phospholipid with DNA. In the presence of DNA in the subphase, the effects from UV irrladiation were seen to be smaller, which means that ionic products from biomolecules degradation stabilize the intact DPPG molecules. This mechanism may explain why UV irradiation does not cause immediate cell collapse, thus providing time for the cellular machinery to repair elements damaged by UV.

Characterization of earth-based mortars for rammed earth repair

All over the world, many earth buildings are deteriorating due to lack of maintenance and repair. Repairs on rammed earth walls are mainly done with mortars, by rendering application; however, often the repair is inadequate, resorting to the use of incompatible materials, including cement-based mortars. It has been observed that such interventions, in walls that until that day only had presented natural ageing issues, created new problems, much more dangerous for the building than the previous ones, causing serious deficiencies in this type of construction. One of the problems is that the detachment of the new cement-based mortar rendering only occurs after some time but, until that occurrence, degradations develop in the wall itself. When the render detaches, instead of needing only a new render, the surface has to be repaired in depth, with a repair mortar. Consequently, it has been stablished that the renders, and particularly repair mortars, should have physical, mechanical and chemical properties similar to those of the rammed earth walls. This article intends to contribute to a better knowledge of earth-based mortars used to repair the surface of rammed earth walls. The studied mortars are based on four types of earth: three of them were collected from non-deteriorated parts of walls of unstabilized rammed earth buildings located in Alentejo region, south of Portugal; the fourth is a commercial earth, consisting mainly of clay. Other components were also used, particularly: sand to control shrinkage; binders stabilizers such as dry hydrated air-lime, natural hydraulic lime, Portland cement and natural cement; as well as natural vegetal fibers (hemp fibers). The experimental analysis of the mortars in the fresh state consisted in determining the consistency by flow table and the bulk density. In the hardened state, the tests made it possible to evaluate the following properties: linear and volumetric shrinkage; capillary water absorption; drying capacity; dynamic modulus of elasticity; flexural and compressive strength.

Organic-inorganic nanostructured multilayers for calcium phosphate biomineralization

The weak fixation of biomaterials within the bone structure is one of the major reasons of implants failures. Calcium phosphate (CaP) coatings are used in bone tissue engineering to improve implant osseointegration by enhancing cellular adhesion, proliferation and differentiation, leading to a tight and stable junction between implant and host bone. It has also been observed that materials compatible with bone tissue either have a CaP coating or develop such a calcified surface upon implantation. Thus, the development of bioactive coatings becomes essential for further improvement of integration with the surrounding tissue. However, most of current applied CaP coatings methods (e.g. physical vapor deposition), cannot be applied to complex shapes and porous implants, provide poor structural control over the coating and prevent incorporation of bioactive organic compounds (e.g. antibiotics, growth factors) because of the used harsh processing conditions. Layer-by-layer (LbL) is a versatile technology that permits the building-up of multilayered polyelectrolyte films in mild conditions based on the alternate adsorption of cationic and anionic elements that can integrate bioactive compounds. As it is recognized in natureâ s biomineralization process the presence of an organic template to induce mineral deposition, this work investigate a ion based biomimetic method where all the process is based on LbL methodology made of weak natural-origin polyelectrolytes. A nanostructured multilayer component, with 5 or 10 bilayers, was produced initially using chitosan and chondroitin sulphate polyelectrolyte biopolymers, which possess similarities with the extracellular matrix and good biocompatibility. The multilayers are then rinsed with a sequential passing of solutions containing Ca2+ and PO43- ions. The formation of CaP over the polyelectrolyte multilayers was confirmed by QCM-D, SEM and EDX. The outcomes show that 10 polyelectrolyte bilayer condition behaved as a  better site for initiating the formation of CaP as the precipitation occur at earlier stages than in 5 polyelectrolyte bilayers one. This denotes that higher number of bilayers could hold the CaP crystals more efficiently. This work achieved uniform coatings that can be applied to any surface with access to the liquid media in a low-temperature method, which potentiates the manufacture of effective bioactive biomaterials with great potential in orthopedic applications.

Influence of type of binder and sand on the characteristics of masonry mortars

This study deals with the characterization of masonry mortars produced with different binders and sands. Several properties of the mortars were determined, like consistence, compressive and flexural strengths, shrinkage and fracture energy. By varying the type of binder (Portland cement, hydrated lime and hydraulic lime) and the type of sand (natural or artificial), it was possible to draw some conclusions about the influence of the composition on mortars properties. The results showed that the use of Portland cement makes the achievement of high strength classes easier. This was due to the slower hardening of lime compared with cement. The results of fracture energy tests showed much higher values for artificial sand mortars when compared with natural sand ones. This is due to the higher roughness of artificial sand particles which provided better adhesion between sand and binder.