Nordic alcohol policy in Europe: the adaptation of Finland’s, Sweden’s and Norway’s alcohol policies to a new policy framework, 1994-2013

The purpose of this thesis is to study how and to which extent Finland, Sweden and Norway have adapted their alcohol policies to the framework imposed to them by the EU and the European Economic Area (EEA) since the mid-1990s. This is done by studying the underlying mechanisms that have influenced the formation of alcohol policy in the Nordic countries in that period. As a part of this analysis main differences in alcohol policies and alcohol consumption between the three countries are assessed and the phenomenon of cross-border trade with alcohol is discussed. The study examines also the development of Finnish, Norwegian and Swedish alcohol policies between 1994 and 2012 and compares the Nordic alcohol policies with other alcohol policies in Europe as the situation was in 2012. The time frame of the study spans from the mid-1990s to the end of 2013 and is divided into three phases. Studying the role of the Europeanisation process on the formation of alcohol policies has a key role in the analysis. Besides alcohol policies, the analyses comprise the development of alcohol consumption and cross-border trade with alcohol. In addition, a quantitative scale constructed to measure the strictness of alcohol policies is utilised in the analyses. The results from the scale are used to substantiate the qualitative analysis and to test whether the stereotypical view of a strict Nordic alcohol policy is still true. The results from the study clearly corroborate earlier findings on the significance of Europeanisation and the Single Market for the development of alcohol policies in the Nordic countries. Free movement of goods and unhindered competition have challenged the principle of disinterest and enabled private profit seeking in alcohol trade. The Single Market has also contributed to the increase in availability of alcohol and made it more difficult for the Nordic EU member states to maintain restrictive alcohol policies. All in all, alcohol policies in the Nordic countries are more liberal in 2013 than they were in 1994. Norway, being outside the EU has, however, managed to maintain a stricter alcohol policy than Finland and Sweden. Norway has also been spared from several EU directives that have affected Finland and Sweden, the most remarkable being the abolishment of the travellers’ import quotas for alcohol within the EU. Due to its position as a non-EU country Norway has been able to maintain high alcohol taxes without being subjected to a ”race to the bottom” regarding alcohol taxes the same way as Finland and Sweden. Finland distinguishes as the country that has liberalised its alcohol policy most during the study period. The changes in alcohol policies were not only induced by Europeanisation and the Single Market, but also by autonomous decision-making and political processes in the individual countries. Furthermore, the study shows that alcohol policy measures are implemented more widely in Europe than before and that there is a slow process of convergence going on regarding alcohol policy in Europe. Despite this, alcohol policies in the Nordic countries are still by far the strictest in all of Europe. From a Europeanisation perspective, the Nordic countries were clearly on the receiving end during the first two study phases (1994–2007), having more to adjust to rules from the EU and the Single Market than having success in uploading and shaping alcohol policy on the European and international field. During the third and final study phase (2008–2013), however, the Nordic countries have increasingly succeeded in contributing to shape the alcohol policy arena in the EU and also more widely through the WHOs global alcohol strategy. The restrictive Nordic policy tradition on which the current alcohol policies in Finland, Sweden and Norway were built on has still quite a solid evidence base. Although the basis of the restrictive alcohol policy has crumbled somewhat during the past twenty years and the policies have become less effective, nothing prevents it from being the base for alcohol policy in the Nordic countries even in the long term. In the future, all that is needed for an effective and successful alcohol policy is a solid evidence base, enough political will and support from the general public.

Suorituskyvyn johtaminen ja IT-strategian suuntaaminen; Case: ICT-alan yritys

Yrityksen tietohallintoon kohdistuu tänä päivänä paljon vaatimuksia. Vaatimukset kohdistuvat tietohallinnon merkitykseen liiketoiminnan tukijana ja suorituskyvyn edistäjänä. ICT-toimialan rooli palveluiden tuottajana ja Suomen taloudellisen kas-vun tukijana ovat merkittävät. Tämän diplomityön tavoite on selvittää mikä on tietohallinnon rooli ja merkitys osana yrityksen suorituskykyä ja miten sitä tulisi kehittää. Tutkimuksen teoreettinen viitekehys koostuu yleisistä suorituskyvyn johtamisen malleista, suorituskyvyn joh-tamisen malleista tietohallinnossa sekä IT-strategian suuntaamisen malleista ja suuntaamisen vaikutuksesta yrityksen suorituskykyyn. Tutkimuskysymys on: miten strategian suuntaamista tulisi kehittää jotta tietohallinto pystyisi edistämään yrityk-sen suorituskykyä? Tutkimusstrategia on case-tutkimus ja empiirinen aineisto on hankittu teemahaastatteluilla. Case-tutkimuksen tulosten mukaan strategian suuntaamisen arvioinnin mallin valit-seminen on tärkeää. Strategian suuntaamisen kaikki näkökulmat tulee ottaa huomi-oon. Esimerkiksi osaaminen, kommunikaatio, kumppanuudet ja ihmisten käyttäy-tyminen saattavat jäädä ns. kovien näkökulmien varjoon. Strategian suuntaamisessa tulee kiinnittää huomiota suuntaamiseen kaikilla organisaatiotasoilla. Toiminnalli-sen tason merkitys tulee myös huomioida. Strategian suuntaamista kehitettäessä tulee arvioinnissa ottaa huomioon eri liiketoimintayksiköiden arvioinnit, koska ne saattavat poiketa vahvasti toisistaan ja siten vääristää kehittämiskohteiden valitse-mista.

Value Creation in Crowd-Business: Developing a Framework for Successful Implementation of Crowdsourcing Initiatives

By recent years the phenomenon called crowdsourcing has been acknowledged as an innovative form of value creation that must be taken seriously. Crowdsourcing can be defined as an act of outsourcing tasks originally performed inside an organization, or assigned externally in form of a business relationship, to an undefinably large, heterogeneous mass of potential actors. This thesis constructs a framework for successful implementation of crowdsourcing initiatives. Firms that rely entirely on their own research and ideas cannot compete with the innovative capacity that crowd-powered firms have. Nowadays, crowdsourcing has become one of the key capabilities of businesses due to its innovative capabilities, in addition to the existing internal resources of the firm. By utilizing crowdsourcing the business gains access to an enormous pool of competence and knowledge. However, various risks remain such as uncertainty of crowd structure and loss of internal know-how. Crowdsourcing Success Framework introduces a step by step model for implementing crowdsourcing into the everyday operations of the business. It starts from the decision to utilize crowdsourcing and continues further into planning, organizing and execution. Finally, this thesis presents the success factors of crowdsourcing initiative.

Contemporary marketing in the high-tech industry: Perceptions of Finnish IT marketing professionals

Over the last 30 years, new technologies and globalization have radically changed the way in which marketing is conducted. However, whereas their effects on business in general have been widely discussed, the focus of the effects on marketing remains without clear recognition. Global research has been made to shed light onto the issue, but it has widely concentrated on the views of executives as well as the consumer markets. In addition, a research gap is existent in applying the concept of marketing change in a specific business-to-business (B2B) industry. Therefore, the main research question this study seeks to answer is: “How is contemporary marketing conducted in the high-technology industry?” In this research, the researcher considers the specific industry of high-technology. However, as the industry is comprised of differing markets, the focus will be given to one of the industry’s prime sectors – the information technology (IT) markets, where companies offer other firms products or services manufactured with advanced technology. The growing IT-market is considered of critical importance in the economies of technologically ready countries such as Finland, where this research is also conducted. Through multiple case studies the researcher aims to describe how the changes in technology, customer engagement and future trends have shaped the way in which successful high-tech marketing is conducted in today’s marketplace. Then, results derived from the empirical research are presented to the reader with links to existing literature. As a conclusion, a generalized framework is constructed to depict and ideal marketer-customer relationship, with emphasis on dynamic, two-way communication and its supporting elements of customer analytics, change adaptation, strategic customer communication and organizational support. From a managerial point of view, the research may provide beneficial information as contemporary marketing can yield profitable outcomes if managed correctly. As a new way to grasp competitive advantage, strategic marketing is much more data-driven and customer-focused than ever before. The study can also prove to be relevant for the academic communities, while its results may act as inspiring for new focus on the education trends of future marketers. This study was limited to the internal activities done at the high-tech industry, leaving out the considerations for co-marketing, marketing via business partners or marketing at other B2B-industries.

A SOA-based Framework for Multi-Devices and Multi-Platform User Interfaces

This thesis reports investigations on applying the Service Oriented Architecture (SOA) approach in the engineering of multi-platform and multi-devices user interfaces. This study has three goals: (1) analyze the present frameworks for developing multi-platform and multi-devices applications, (2) extend the principles of SOA for implementing a multi-platform and multi-devices architectural framework (SOA-MDUI), (3) applying and validating the proposed framework in the context of a specific application. One of the problems addressed in this ongoing research is the large amount of combinations for possible implementations of applications on different types of devices. Usually it is necessary to take into account the operating system (OS), user interface (UI) including the appearance, programming language (PL) and architectural style (AS). Our proposed approach extended the principles of SOA using patterns-oriented design and model-driven engineering approaches. Synthesizing the present work done in these domains, this research built and tested an engineering framework linking Model-driven Architecture (MDA) and SOA approaches to developing of UI. This study advances general understanding of engineering, deploying and managing multi-platform and multi-devices user interfaces as a service.

Green welding in practice

Efficient production and consumption of energy has become the top priority of national and international policies around the world. Manufacturing industries have to address the requirements of the government in relation to energy saving and ecologically sustainable products. These industries are also concerned with energy and material usage due to their rising costs. Therefore industries have to find solutions that can support environmental preservation yet maintain competitiveness in the market. Welding, a major manufacturing process, consumes a great deal of material and energy. It is a crucial process in improving a product’s life-cycle cost, strength, quality and reliability. Factors which lead to weld related inefficiencies have to be effectively managed, if industries are to meet their quality requirements and fulfil a high-volume production demand. Therefore it is important to consider some practical strategies in welding process for optimization of energy and material consumption. The main objective of this thesis is to explore the methods of minimizing the ecological footprint of the welding process and methods to effectively manage its material and energy usage in the welding process. The author has performed a critical review of the factors including improved weld power source efficiency, efficient weld techniques, newly developed weld materials, intelligent welding systems, weld safety measures and personnel training. The study lends strong support to the fact that the use of eco-friendly welding units and the quality weld joints obtained with minimum possible consumption of energy and materials should be the main directions of improvement in welding systems. The study concludes that, gradually implementing the practical strategies mentioned in this thesis would help the manufacturing industries to achieve on the following - reduced power consumption, enhanced power control and manipulation, increased deposition rate, reduced cycle time, reduced joint preparation time, reduced heat affected zones, reduced repair rates, improved joint properties, reduced post-weld operations, improved automation, improved sensing and control, avoiding hazardous conditions and reduced exposure of welder to potential hazards. These improvement can help in promotion of welding as a green manufacturing process.

Ochratoxin A in Brazilian green coffee

Ochratoxin A is a nephrotoxic, teratogenic and imunotoxic compound produced by Aspergillus and Penicillium spp. It is a suspected carcinogen to humans and it is carcinogenic to rats. Recently it has drawn attention because it has been found in coffee and it has been the object of regulation by coffee importing countries. Brazil is the largest coffee producing country and its largest consumer. In order to conduct an initial assessment of the situation of the coffee produced in the country and offered to its population, one hundred and thirty two samples of Brazilian green coffee from 5 producing states (Minas Gerais, Paraná, São Paulo, Espírito Santo and Bahia) and destined for the home market, were collected at sales points at the cities of Londrina and Santos, Brazil, and analyzed for ochratoxin A. The toxin was isolated in immunoaffinity columns and quantified by HPLC with florescence detection. The limit of detection was 0.7ng/g and the average RSD for duplicates of the samples was 11%. Twenty seven samples were found contaminated with the toxin and the average concentration for the contaminated samples was 7.1ng/g ochratoxin A. Neither the total number of defects nor the number of specific defects according to the Brazilian coffee classification system (black, partly -- black, sour, stinkers-black, stinkers-green, pod beans) showed any relation to the contamination of the samples with ochratoxin A.

Development of an Ecology-Oriented Software-Defined Networking Framework

ICT contributed to about 0.83 GtCO2 emissions where the 37% comes from the telecoms infrastructures. At the same time, the increasing cost of energy has been hindering the industry in providing more affordable services for the users. One of the sources of these problems is said to be the rigidity of the current network infrastructures which limits innovations in the network. SDN (Software Defined Network) has emerged as one of the prominent solutions with its idea of abstraction, visibility, and programmability in the network. Nevertheless, there are still significant efforts needed to actually utilize it to create a more energy and environmentally friendly network. In this paper, we suggested and developed a platform for developing ecology-related SDN applications. The main approach we take in realizing this goal is by maximizing the abstractions provided by OpenFlow and to expose RESTful interfaces to modules which enable energy saving in the network. While OpenFlow is made to be the standard for SDN protocol, there are still some mechanisms not defined in its specification such as settings related to Quality of Service (QoS). To solve this, we created REST interfaces for setting of QoS in the switches which can maximize network utilization. We also created a module for minimizing the required network resources in delivering packets across the network. This is achieved by utilizing redundant links when it is needed, but disabling them when the load in the network decreases. The usage of multi paths in a network is also evaluated for its benefit in terms of transfer rate improvement and energy savings. Hopefully, the developed framework can be beneficial for developers in creating applications for supporting environmentally friendly network infrastructures.

Benchmark of routing protocols regarding green considerations

In Mobile Ad-hoc Networks (MANET) the participating nodes have several roles such as sender, receiver and router. Hence there is a lot of energy consumed by the nodes for the normal working of the network since each node has many different roles. Also in MANET the nodes keep moving constantly and this in turn consumes a lot of energy. Since battery capacity of these nodes is limited it fails to fulfil the high demand of energy. The scarcity of energy makes the energy conservation in mobile ad-hoc networks an important concern. There is several research carried out on the energy consumption of mobile ad-hoc networks these days. Some of this research suggests sleep mode, transmission power control, load balancing etc. In this thesis, we are comparing various proposed energy efficient models for some of the ad-hoc protocols. We compare different energy efficient models for Optimised Linked State Algorithm (OLSR) and Ad-hoc On Demand Distance Vector (AODV). The routing protocols are compared for different parameters such as average remaining energy, number of nodes alive, payload data received and performance with different mobility speed. The simulation results helps in benchmarking the various energy efficient routing models for OLSR and AODV protocols. The benchmarking of the routing protocols can be based on many factors but this thesis concentrates on benchmarking the MANET routing protocols mainly based on the energy efficiency and increased network lifetime.

A method for fast determination of epigallocatechin gallate (EGCG), epicatechin (EC), catechin (C) and caffeine (CAF) in green tea using HPLC

Tea has been considered a medicine and a healthy beverage since ancient times, but recently it has received a great deal of attention because of its antioxidant properties. Green tea polyphenols have demonstrated to be an effective chemopreventive agent. Recently, investigators have found that EGCG, one of the green tea catechins, could have anti-HIV effects when bound to CD4 receptor. Many factors can constitute important influences on the composition of tea, such as species, season, age of the leaf, climate, and horticultural practices (soil, water, minerals, fertilizers). This paper presents an HPLC analytical methodology development, using column RP-18 and mobile phase composed by water, acetonitrile, methanol, ethyl acetate, glacial acetic acid (89:6:1:3:1 v/v/v/v/v) for simultaneous determination and quantification of caffeine (CAF), catechin (C), epicatechin (EC) and epigallocatechin gallate (EGCG) in samples of Camellia sinensis (green tea) grown in Brazil and harvested in spring, in summer and in autumn, in comparison to Brazilian black tea, to samples of Japanese and Chinese green tea and to two standardized dry extracts of green tea. The method has been statistically evaluated and has proved to be adequate to qualitative and quantitative determination of the samples.

Quantification of catechins and caffeine from green tea (Camellia sinensis) infusions, extract, and ready-to-drink beverages

This study aimed to quantify the levels of catechins and caffeine in various forms of presentation of green tea: infusion tea bags, extract, and ready-to-drink beverage and, based on their content, identify the most suitable for consumption. High Performance Liquid Chromatography (HPLC) analytical method was used for the quantification of catechins and caffeine. The tea bags had the highest concentration of total catechins with 5 to 9.5% followed by the extract with 3.64 to 4.88%, and ready-to-drink green tea beverage showed low levels of catechins, from 0.14 to 0.26%. As for caffeine content, green tea extract had higher concentration (1.96 to 3.54%) compared to the tea bags (1.39 to 1.57%). Tea bags were found the most suitable for consumption because it contains higher amounts of catechins and smaller amounts of caffeine.

Development and validation of a method for detection and quantification of ochratoxin A in green coffee using liquid chromatography coupled to mass spectrometry

A method using Liquid Chromatography Tanden Mass Spectrometry (LC-MS/MS) with matrix-matched calibration curve was developed and validated for determining ochratoxin A (OTA) in green coffee. Linearity was found between 3.0 and 23.0 ng.g-1. Mean recoveries ranged between 90.45% and 108.81%; the relative standard deviation under repeatability and intermediate precision conditions ranged from 5.39% to 9.94% and from 2.20% to 14.34%, respectively. The limits of detection and quantification were 1.2 ng.g-1 and 3.0 ng.g-¹, respectively. The method developed was suitable and contributed to the field of mycotoxin analysis, and it will be used for future production of the Certified Reference Material (CRM) for OTA in coffee.

Stability of porridge pre-mixture made with Brazil nut flour and green banana flour with and without milk powder

The mixture of Brazil nut flour and green banana flour can improve the nutritional value of school meals, allowing for the use of regional ingredients derived from family agriculture. This study aimed to assess the stability of porridge pre-mixtures made with Brazil nut flour and green banana flour during six months of storage. Two types of pre-mixture were evaluated: with and without milk powder. These mixtures were packed in polyethylene/metallized polyester film, vacuum-sealed, and stored at room temperature. The products were evaluated for physicochemical composition, and every 30 days for moisture content, water activity, titratable acidity, pH, peroxide value and acidity of the lipid phase, total and thermotolerant coliforms, yeasts and molds, and sensory acceptance. There was no difference between the mixtures for the parameters evaluated. Moisture content, water activity, acidity of the lipid phase, and the yeast and mold count increased with storage time. The growth of yeasts and molds was more pronounced after 90 days of storage, when water activity reached the limit of 0.60. Although both products had good sensory acceptance throughout the period of study, it is recommended that the shelf life does not exceed 90 days.

Green and brown propolis: efficient natural biocides for the control of bacterial contamination of alcoholic fermentation of distilled beverage

This study aimed to evaluate the efficiency of natural biocides, brown and green propolis, for the control of bacterial contamination in the production of sugarcane spirit. The treatments consisted of brown and green propolis extracts, ampicillin, and a control and were assessed at the beginning and end of harvest season in ten fermentation cycles. In the microbiological analyses, the lactic acid bacteria were quantified in the inoculum before and after the treatment with biocides, and the viability of yeast cells during fermentation was evaluated. The levels of acids, glycerol, total residual reducing sugars, and ethanol were analyzed for the wine resulting from each fermentation cycle. A reduction in the number of bacterial contaminants in the inoculum in the treatments with the natural biocides was observed, but it did not affect the viability of yeast cells. The control of the contaminants led to the production of higher levels of ethanol and reduced acidity in the wine produced. The results of the use of brown and green propolis to control the growth microorganisms in the fermentation of sugarcane spirit can be of great importance for using alternative strategies to synthetic antibacterials in fermentation processes including other distilled beverage or spirits.

Adopting the Vaadin Java framework to rebuild VTT’s Web Interfaces and Database Applications

With the growth in new technologies, using online tools have become an everyday lifestyle. It has a greater impact on researchers as the data obtained from various experiments needs to be analyzed and knowledge of programming has become mandatory even for pure biologists. Hence, VTT came up with a new tool, R Executables (REX) which is a web application designed to provide a graphical interface for biological data functions like Image analysis, Gene expression data analysis, plotting, disease and control studies etc., which employs R functions to provide results. REX provides a user interactive application for the biologists to directly enter the values and run the required analysis with a single click. The program processes the given data in the background and prints results rapidly. Due to growth of data and load on server, the interface has gained problems concerning time consumption, poor GUI, data storage issues, security, minimal user interactive experience and crashes with large amount of data. This thesis handles the methods by which these problems were resolved and made REX a better application for the future. The old REX was developed using Python Django and now, a new programming language, Vaadin has been implemented. Vaadin is a Java framework for developing web applications and the programming language is extremely similar to Java with new rich components. Vaadin provides better security, better speed, good and interactive interface. In this thesis, subset functionalities of REX was selected which includes IST bulk plotting and image segmentation and implemented those using Vaadin. A code of 662 lines was programmed by me which included Vaadin as the front-end handler while R language was used for back-end data retrieval, computing and plotting. The application is optimized to allow further functionalities to be migrated with ease from old REX. Future development is focused on including Hight throughput screening functions along with gene expression database handling